Hi
Hopefully a simple one but unable to figure out a default setting.
Simply for the home desktop and want to share with other kit on the home network.
When I boot up it appears I have to always tweak the settings :
1) Control Panel > System > Change settings > Network ID and select under "Select the option that best describes your network" so I opt for I tick "this is a home computer; it's not part of a business network."
2 )The reboot.
All works fine and all devices can be seen and read/write in accordance with the appropriate share settings.
Now the issue is when I next reboot the
Control Panel > System > Change settings > Network ID and select under "Select the option that best describes your network" will default to "This computer is part of a business network; I use it to connect to other computers at work".
So I have to got through steps 1 and 2 again.
How to I get Windows 8.1Pro x64 to default to the "this is a home computer; it's not part of a business network." on each boot without having to manual configure.
Thanks for your time as usual.
Hopefully a simple one but unable to figure out a default setting.
Simply for the home desktop and want to share with other kit on the home network.
When I boot up it appears I have to always tweak the settings :
1) Control Panel > System > Change settings > Network ID and select under "Select the option that best describes your network" so I opt for I tick "this is a home computer; it's not part of a business network."
2 )The reboot.
All works fine and all devices can be seen and read/write in accordance with the appropriate share settings.
Now the issue is when I next reboot the
Control Panel > System > Change settings > Network ID and select under "Select the option that best describes your network" will default to "This computer is part of a business network; I use it to connect to other computers at work".
So I have to got through steps 1 and 2 again.
How to I get Windows 8.1Pro x64 to default to the "this is a home computer; it's not part of a business network." on each boot without having to manual configure.
Thanks for your time as usual.
My Computer
System One
-
- OS
- 8.1
- Computer type
- PC/Desktop
- System Manufacturer/Model
- Home Build
- CPU
- i7 2.66 Fatory Clocked
- Motherboard
- EVGA X55
- Memory
- 12GB 1066mhz Factory Clock
- Graphics Card(s)
- Nvidia GT660
- Sound Card
- RME Fireface 800
- Monitor(s) Displays
- Dell 26ips + Smasung 226BW
- Screen Resolution
- 1900*1200 + 1280*720?
- Hard Drives
- 1 x OCZ Agility 3 SSD 128
1 x OCZ Agility 460 SSD 128
1 x WD 1GB
1 x WD 2GB
1 X WD Raptor 150Gb
1 x WD 500GB
External Drives Lacie 6TB
- PSU
- Xigmatec
- Case
- Fraftal Design R4
- Cooling
- 5 x 1400mm Fans low rev
- Keyboard
- MS Bulk Standard
- Mouse
- Logitech G700
- Internet Speed
- 150
- Browser
- Firefox
- Antivirus
- EsetNod
- Other Info
- Digital Audio Workstation -
OTB Hardware; Access Virus TI, x0xb0x, Elektron Analog Keys, Roland JD800, Roland JV1080, TC Electronics Fireworx, Adams A7X
ITB Software; Cubase 7.5.2, Wavelab, Native Intruments Komplete98u, u-he and lots of legally installed plugins.
I buy my software when not freeware! Support the devs!