Not All Hardware Showing

[GMan]

Whoops - missed one - also install the J-Micron storage driver from the following link:

ftp://driver.jmicron.com.tw/SATA_Controller/Windows/JMB36X_WinDrv_R1.17.63_WHQL.zip

Name    Standard Dual Channel PCI IDE Controller
Manufacturer    (Standard IDE ATA/ATAPI controllers)
Status    OK
PNP Device ID    PCI\VEN_197B&DEV_2362&SUBSYS_84601043&REV_10\4&820CCE8&0&00E4
I/O Port    0x0000DC00-0x0000DC07
I/O Port    0x0000D880-0x0000D883
I/O Port    0x0000D800-0x0000D807
I/O Port    0x0000D480-0x0000D483
I/O Port    0x0000D400-0x0000D40F
Memory Address    0xFBDFFC00-0xFBDFFDFF
IRQ Channel    IRQ 16
Driver    c:\windows\system32\drivers\pciide.sys (6.2.8250.0, 13.80 KB (14,136 bytes), 2/17/2012 9:20 PM)

 

[lechumbl]

Hi all,

I must be brain dead, as I can not find any later drivers that the installed ones.
A little help there?

I was able to change drive E: back to NTFS from FAT32, no problem.
It is fine and works great in Win 8 64 OS.

Had already installed J-Micron.

Thanx for the help so far!!

What be next?

Take care...........

 

[GMan]

Install from motherboard site.

 

[lechumbl]

Install from motherboard site.

Hi bud,

I had been, before your reply, to the Asus site and downloaded every driver for my X58.
Either they were updated, or got error message:
"Does not support this Operating System: WNT_6.2P_64_MCE.

Still, to no avail.

I guess I will live with the one player.

Take care, and thanks to all for the assistance............

 

[GMan]

Install using device manager. Right click on the specific storage to update, Update driver software, browse my computer, let me pick, have disk, browse...

Find and double click on the .inf file. Click next, click ok and it will install.

Reboot when done. Do for both of the motherboard ones I've shown.

Also do the same for the Marvell if it doesn't show as Marvell in the Device Manager yet.

 

[lechumbl]

Install using device manager. Right click on the specific storage to update, Update driver software, browse my computer, let me pick, have disk, browse...

Find and double click on the .inf file. Click next, click ok and it will install.

Reboot when done. Do for both of the motherboard ones I've shown.

Also do the same for the Marvell if it doesn't show as Marvell in the Device Manager yet.

Hi GMan,

Did that way too, before we typed.

Still to no avail, get message my driver is older than installed driver, do I want to overwrite with older driver.

I am at my wits ends, not a long trip tho.

Take care...........

 

[GMan]

So did you tell is yes so it installs?

If you didn't change anything from last I've seen, then you're still not using the proprietary driver(s).

I really don't think it would even say anything about older or newer if you double click on the inf file itself.

The goal is to get them to use iaStor.sys, jmcr.sys and mv64xx.sys instead of all using pciide.sys.

 

[lechumbl]

Hi GMan,

Here is the latest .zip of msinfo32 from Win 8 64.

The drivers installed, so they should be updated.

Still no second blu-ray player tho.

Take care..........

 

[GMan]

Name    ATA Channel 0
Manufacturer    (Standard IDE ATA/ATAPI controllers)
Status    OK
PNP Device ID    PCIIDE\IDECHANNEL\4&38D74911&0&0
Driver    c:\windows\system32\drivers\atapi.sys (6.2.8250.0, 26.80 KB (27,448 bytes), 2/17/2012 9:20 PM)
    
Name    ATA Channel 1
Manufacturer    (Standard IDE ATA/ATAPI controllers)
Status    OK
PNP Device ID    PCIIDE\IDECHANNEL\4&38D74911&0&1
Driver    c:\windows\system32\drivers\atapi.sys (6.2.8250.0, 26.80 KB (27,448 bytes), 2/17/2012 9:20 PM)
    
[COLOR=#ff0000]Name    Intel(R) ICH10 Family 2 port Serial ATA Storage Controller 2 - 3A26
Manufacturer    Intel
Status    OK
PNP Device ID    PCI\VEN_8086&DEV_3A26&SUBSYS_82D41043&REV_00\3&11583659&0&FD
I/O Port    0x0000A000-0x0000A007
I/O Port    0x00009C00-0x00009C03
I/O Port    0x00009880-0x00009887
I/O Port    0x00009800-0x00009803
I/O Port    0x00009480-0x0000948F
I/O Port    0x00009400-0x0000940F
IRQ Channel    IRQ 20
Driver    c:\windows\system32\drivers\pciide.sys (6.2.8250.0, 13.80 KB (14,136 bytes), 2/17/2012 9:20 PM)
    
Name    Intel(R) ICH10 Family 4 port Serial ATA Storage Controller 1 - 3A20
Manufacturer    Intel
Status    OK
PNP Device ID    PCI\VEN_8086&DEV_3A20&SUBSYS_82D41043&REV_00\3&11583659&0&FA
I/O Port    0x00009000-0x00009007
I/O Port    0x00008C00-0x00008C03
I/O Port    0x00008880-0x00008887
I/O Port    0x00008800-0x00008803
I/O Port    0x00008480-0x0000848F
I/O Port    0x00008400-0x0000840F
IRQ Channel    IRQ 20
Driver    c:\windows\system32\drivers\pciide.sys (6.2.8250.0, 13.80 KB (14,136 bytes), 2/17/2012 9:20 PM)[/COLOR]
    
Name    ATA Channel 0
Manufacturer    (Standard IDE ATA/ATAPI controllers)
Status    OK
PNP Device ID    PCIIDE\IDECHANNEL\4&3189A216&0&0
Driver    c:\windows\system32\drivers\atapi.sys (6.2.8250.0, 26.80 KB (27,448 bytes), 2/17/2012 9:20 PM)
    
Name    ATA Channel 1
Manufacturer    (Standard IDE ATA/ATAPI controllers)
Status    OK
PNP Device ID    PCIIDE\IDECHANNEL\4&3189A216&0&1
Driver    c:\windows\system32\drivers\atapi.sys (6.2.8250.0, 26.80 KB (27,448 bytes), 2/17/2012 9:20 PM)

Still don't have iaStor.sys installed for Intel, and very old 2009 driver installed for Marvell, but excellent job with the J-Micron from the link I posted.

My concern at the moment has nothing to do with the BluRay drive at all. I'm helping you make the system well and when that's all said and done, then we can begin to figure out why the drive is missing.

Please post new msinfo32 after the iaStor.sys is being used for the Intel SATAs above. Also, install "Marvell 91XX Controller Beta Driver V1.2.0.1002 for Windows 32/64bit Vista & 32/64bit" from here: ASUS - Motherboards- ASUS SABERTOOTH X58 <<<< so it has 2011 driver instead of 2009.

---

I doubt it very much because it is showing pciide.sys for the Intel ones - but it might be worth checking in the device manager for their properties to see which driver it shows as being used. If iaStor.sys is shown there, then it is installed.

 

[lechumbl]

Hi again,
Need to start over, as after getting the new Marvell driver install, I was installing the iaStor driver and got a blue screen in Windows 8.
I can not get into it now, so I must use my backup from last night, and then do Marvell and iaStor install again.
It will take some time, so will update in the morn.
God, I love computers.
Take care.......

 

[lechumbl]

Hi GMan,

OK, the JMicron and Marvell drivers installed flawlessly, but again the iaStor driver blue screened my system.

I am not going to blue screen it again, with another attempt, so, let's move on.

Take care........

 

[lechumbl]

Hi all,

OK, here is the skinny:
Three times I tried to install the iaStor driver and three times it blue screened and I had to spend 5 hours each restore.
I am done with updating the drivers.

Anyone want to tackle my blu-ray player missing issue with me?

Take care.........

 

[lechumbl]

Hi all,

Thanx to Calico and GMan.
Even tho GMan has been banned, he helped me a lot.
And Calico, I thank you again.

I guess there is no one who wishes to help me on this forum, this surprises me.

Take care........