BSOD for no reason! - Please help.

45fsdcv55

New Member
Messages
1
Hello,

I did not install any programs recently nor updated any drivers but out of a sudden I've started to get BSOD. I've checked my RAM's and HDD and did not see any problems whatsoever.

PS: I can run the PC in safe mode.
 
The cause is the 307bc4e7.sys driver, however searching this driver reveals literally nothing.
Because of this, I would like you to run a few malware scans to see if they find something



Diagnostics Test

Malware scan


Please run a threat scan with Malwarebytes*, a full scan with your AV, scan your system with Adwcleaner, Kaspersky TTDSKiller, ESET Online Scanner and SuperAntiSpyware
Note   Note
*(Uncheck trial version in the installation process)



Daemon tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known cause for BSOD's.
Please remove Daemon Tools and run the SPTD pass through remover.
  1. Uninstall Daemon Tools
  2. Download the SPTD standalone installer and follow these steps:
    • Double click the executable to open it
    • Click on the button shown below
34700d1440923396-bsod-0x124-whea_uncorrectable_error-nothing-works-a887c9d9e7.png

If the button is grayed out, like in the image, there is no more SPTD installation on your system, and you can close the window
Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 50, {fffff6fb40000000, 0, 0, 6}

*** WARNING: Unable to verify timestamp for 307bc4e7.sys
*** ERROR: Module load completed but symbols could not be loaded for 307bc4e7.sys

Could not read faulting driver name
Probably caused by : 307bc4e7.sys ( 307bc4e7+5a21 )

Followup: MachineOwner

0: kd> lmvm 307bc4e7
start             end                 module name
fffff800`1c2f8000 fffff800`1c30f000   307bc4e7 T (no symbols)           
    Loaded symbol image file: 307bc4e7.sys
    Image path: \??\C:\WINDOWS\system32\drivers\307bc4e7.sys
    Image name: 307bc4e7.sys
    Timestamp:        Wed Feb 03 08:22:16 2016 (56B1AAA8)
    CheckSum:         000198B5
    ImageSize:        00017000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
 
Back
Top