Hi,
I have Windows 8.1 x64 and the following:
Radeon HD5450
Samsung TV connected via HDMI to graphics card
AMD HDMI High Definition Audio Device
Realtek HD audio
I have a strange problem that has not always been there but just recently if I don't have any sounds for about 5 minutes the HDMI audio seems to go into some sort of suspended mode and when I click on (generate) a sound (either system or music etc) it takes about 30 seconds for the sound to actually appear (manifest itself) through the Samsung TV speakers.
At first I thought it might be some conflict with the Realtek HD audio so I have disabled this (mobo built-in sound) in the BIOS and uninstalled the realtek drivers. This did not help.
I then thought it was probably an update to the Sound drivers or the graphics drivers for the ATI / AMD Sound card. I have installed the latest catalyst drivers and this did not help. I then fully uninstalled the catalyst drivers including the HDMI Audio and installed an earlier version 9.2.00 from 2012. This did not help either.
I just cannot get to the bottom of it and wondered if anyone else has this issue or can help.
The only Playback Audio Device I have in the Sound settings is Digital Audio (HDMI) and I have tried disbling all audio enhancements. This did not help.
Please note that this happens even if I am using the computer (i.e. the screen can be on all of the time and it still happens after a few minutes).
Other things I have tried:
Power Config - disabled Link State Power Management for the PCIe card
One think I have observed (and I am not sure if this is a symptom or a cause) - The "Windows Audio Device Graph Isolation" process uses about 3-4% CPU while the 30 seconds or so elapses between the sound being invoked and it playing through the speakers. the rest of the sstem is relatively in idle. I can reproduce this by clicking on the sound and adjusting the volume a tad. It is meant to make an immediate "bing" sound to show the sound level is clicked or changed.
If I wait the 30 seconds then the sound eventually comes and then if I click on it again (or do other sound related things) then the sounds are instantaneous. Its only of I leave it 5 minutes or so with no sound activity. If I wait, say, 2 minutes the sound is instant too so long as their has been a sound event in the prior 5 minutes or so.
Its driving me nuts!!
Cheers,
Paul
I have Windows 8.1 x64 and the following:
Radeon HD5450
Samsung TV connected via HDMI to graphics card
AMD HDMI High Definition Audio Device
Realtek HD audio
I have a strange problem that has not always been there but just recently if I don't have any sounds for about 5 minutes the HDMI audio seems to go into some sort of suspended mode and when I click on (generate) a sound (either system or music etc) it takes about 30 seconds for the sound to actually appear (manifest itself) through the Samsung TV speakers.
At first I thought it might be some conflict with the Realtek HD audio so I have disabled this (mobo built-in sound) in the BIOS and uninstalled the realtek drivers. This did not help.
I then thought it was probably an update to the Sound drivers or the graphics drivers for the ATI / AMD Sound card. I have installed the latest catalyst drivers and this did not help. I then fully uninstalled the catalyst drivers including the HDMI Audio and installed an earlier version 9.2.00 from 2012. This did not help either.
I just cannot get to the bottom of it and wondered if anyone else has this issue or can help.
The only Playback Audio Device I have in the Sound settings is Digital Audio (HDMI) and I have tried disbling all audio enhancements. This did not help.
Please note that this happens even if I am using the computer (i.e. the screen can be on all of the time and it still happens after a few minutes).
Other things I have tried:
Power Config - disabled Link State Power Management for the PCIe card
One think I have observed (and I am not sure if this is a symptom or a cause) - The "Windows Audio Device Graph Isolation" process uses about 3-4% CPU while the 30 seconds or so elapses between the sound being invoked and it playing through the speakers. the rest of the sstem is relatively in idle. I can reproduce this by clicking on the sound and adjusting the volume a tad. It is meant to make an immediate "bing" sound to show the sound level is clicked or changed.
If I wait the 30 seconds then the sound eventually comes and then if I click on it again (or do other sound related things) then the sounds are instantaneous. Its only of I leave it 5 minutes or so with no sound activity. If I wait, say, 2 minutes the sound is instant too so long as their has been a sound event in the prior 5 minutes or so.
Its driving me nuts!!
Cheers,
Paul
My Computer
System One
-
- OS
- Win7 Ultimate