My computer shipped from the factory (Dell) with Windows 7 x64. I recently did a clean ('custom') install of Windows 8 Pro x64. The install went very well, no problems. To install Windows 8, I booted from a USB flash drive.
I actually have two licensed copies of Windows 8. The other copy is on a DVD. To test the functioning of my DVD drive, I tried to boot from the Windows 8 disk. The computer would not boot. My computer had no trouble booting from the USB flash drive version of my Windows 8 installer, obviously, but it won't boot from a disk version of same.
As a further test, I tried to boot my computer from my original factory Windows 7 install disk. The computer successfully booted from this disk.
I therefore concluded that my computer can boot from a disk made with WinPE 3, but it will not boot from a disk made with WinPE 4, even though it will boot from a USB flash drive made with WinPE 4. I tried to boot from other bootable disks made with WinPE 4 - none would boot the computer. Other bootable flash drives made with WinPE 4 have no problem booting my computer.
My computer is partitioned with a MBR and uses a BIOS. I made no changes to my BIOS settings, and unfortunately there will be no more BIOS updates for my computer.
Should I just accept that I cannot boot from disks made with WinPE 4, or is there some way around this? I'm not too broken up about this because, after all, I have no trouble booting from WinPE 4 flash drives. And disks are on the way out, anyway.
I actually have two licensed copies of Windows 8. The other copy is on a DVD. To test the functioning of my DVD drive, I tried to boot from the Windows 8 disk. The computer would not boot. My computer had no trouble booting from the USB flash drive version of my Windows 8 installer, obviously, but it won't boot from a disk version of same.
As a further test, I tried to boot my computer from my original factory Windows 7 install disk. The computer successfully booted from this disk.
I therefore concluded that my computer can boot from a disk made with WinPE 3, but it will not boot from a disk made with WinPE 4, even though it will boot from a USB flash drive made with WinPE 4. I tried to boot from other bootable disks made with WinPE 4 - none would boot the computer. Other bootable flash drives made with WinPE 4 have no problem booting my computer.
My computer is partitioned with a MBR and uses a BIOS. I made no changes to my BIOS settings, and unfortunately there will be no more BIOS updates for my computer.
Should I just accept that I cannot boot from disks made with WinPE 4, or is there some way around this? I'm not too broken up about this because, after all, I have no trouble booting from WinPE 4 flash drives. And disks are on the way out, anyway.
My Computer
System One
-
- OS
- Windows 8