Reply to thread

Message: <blockquote data-quote="john970" data-source="post: 153282" data-attributes="member: 13575"><p>I ran diskpart and set the hard drive to inactive. From the diskpart list, I noticed that drive letter D: had been assigned to a DVD drive, so I reset the drive letters in Disk Management. I also deleted the volume name "System Reserved" from the hard drive from Properties in Disk Management. It's still Disk 0, but as previously, the computer boots normally to the SSD, which still is Disk 1 and HarddiskVolume2. I looked again at the BIOS setup on the Z77, BIOS 1708, and the only options under SATA configuration are to Enable or Disable Hot Plug on each drive. Unless there is some reason that the SSD should be Disk 0, the problem appears to be solved.</p></blockquote><p></p>