New update: Bug fixes and Improvements v7.2.4942 - 22nd May 2020
Backup Progress
We've added a live backup total progress bar to the Reflect task bar icon.
Backup blocked
A few customers have noticed backups hanging after completion which could prevent the next backup from starting. We've improved the communication between backup instances to prevent a potential race condition.
ReDeploy
Some customers have noticed poor CPU performance after redeploying to new hardware. ReDeploy has been improved to only reset CPU drivers if a CPU change is detected
New update Bug fixes and Improvements v7.2.4971 - 16th June 2020
Legacy MBR Systems
For MBR Windows 10 systems the 'Create an image of the partition(s) required to backup and restore Windows' now includes the Windows Recovery partition.
MBR systems using BitLocker for the Windows volume would require running 'Fix Windows boot problems' after a 'live' BitLocker restore. This has been resolved.
UEFI System detection
The Windows 10 2004 (May) update caused legacy MBR systems to be detected as UEFI. This has been resolved.
File and Folder Backup
File and Folder 'Folders to exclude' now permits trailing backslashes.
Rescue Media Builder
RMBuilder now prevents the boot menu being set for PE 3.1 on UEFI booting systems. PE 3.1 is legacy MBR only.
RMBuilder would incorrectly report that not enough free space was available when using 1GB flash media. This has been resolved.
New updates: Bug fixes and Improvements v7.2.5107 - 5th August 2020
Reflect hanging after running a backup
Release 7.2.5098 could cause ReflectBin.exe to hang at the end of a backup. This has been resolved.
Bug fixes and Improvements v7.2.5098 - 5th August 2020
Restore/Clone
We've added a new confirmation prompt when extending a partition beyond 2TB on an MBR disk. Extending beyond 2TB will cause the disk layout to be converted to GPT format and will cause MBR system disks to be non-bootable.
In the rescue media, we've also added a warning to indicate that disks converted to GPT will not be accessible by Windows XP and Server 2003.
When copying an MBR 'Active' partition to an existing non 'Active' partition the target partition may not get marked 'Active' after restoring. This has been resolved.
Automatic system restore for 32 bit systems
If initiating a system restore in Windows causes the boot menu to be automatically added then, for 32 bit systems, local NIC and mass storage drivers may not be copied. This has been resolved.
Changed Block Tracker
Fixed a permission issue that prevented the Encrypted File System (EFS) from encrypting some files on volumes that were formatted while CBT was active.
Improved compatibility with Windows 10 build 2004.
Various
Various minor fixes and changes to improve Macrium Reflect.
Changed Block Tracker
After performing a restore of a non-system volume for which CBT had been enabled, CBT could become disabled on that volume and would not re-enable until the system had been restarted. This has been resolved. Email Notifications
We've enhanced OpenSSL integration and upgraded to 1.1.1h to address any potential security concerns.
A bug fix: Bug fixes and Improvements v7.3.5283 - 15th October 2020
Changed Block Tracker
When removing a USB attached storage device, an APC_INDEX_MISMATCH BSoD could be generated if there was an outstanding kernel lock on the device. This has been resolved.
And yet another update Bug fixes and Improvements v7.3.5289 - 16th October 2020
Changed Block Tracker
On some systems, CBT could execute the wrong notification handler in response to a malformed notification. This could result in the following bug checks: MULTIPLE_IRP_COMPLETE_REQUESTS, KERNEL_SECURITY_CHECK_FAILURE or ATTEMPTED_WRITE_TO_READONLY_MEMORY. This has now been resolved.
Macrium Task Scheduler
Scheduled VBScript files could fail with error code 0xC1 instead of running. This has been resolved.
Bug fixes and Improvements v7.3.5321 - 3rd November 2020
Macrium Task Scheduler
If a scheduled backup was missed without the option 'Run the task as soon as possible after a scheduled task is missed' enabled, then the Run Now button would stop working until the PC was restarted. This has been resolved.
Scheduled backups running on startup were starting too quickly, without giving network connections time to initialise. This has been resolved.
The Macrium Task Scheduler now keeps extra copies of its internal configuration files to prevent failure on corruption.
When trying to import a scheduled task with a definition file path that doesn't exist, Reflect will now prompt to Browse for a different definition file.
Rescue Media Builder
The Windows Version of the WinRE kernel could be incorrectly displayed. This has been resolved.
Reflect Monitor
ReflectMonitor.exe could fail to launch at logon and prevent notification of running backups. This has been resolved.
Backup Log
A Consolidation 'Warning' error could override a 'Failure' error for a backup and incorrectly display a Warning icon instead of Error. This has been resolved.
License Key
We've added 'copy' functionality for the license key displayed in the About dialog
Bug fixes and Improvements v7.3.5365 - 26th November 2020
Macrium Task Scheduler
Scheduling a backup to run as a specific user would sometimes prevent the Power Saving options from working correctly. This has been resolved.
Under certain circumstances, restarting Macrium Service would cause the Macrium Task Scheduler to stop running for around a minute. This has been resolved.
Schedule start dates can no longer be set later than the year 2999.
File and Folder Backup
Deleting a backed up folder and creating a file with the same name as the deleted folder mid backup set could cause a File and Folder backup set to fail to load. This has been resolved.
Changed Block Tracker
We've changed Windows event ID 13 - "IOCTL_MRCBT_QUERY_VOLUME_TRACKING_INFORMATION failed on device" to be Informational.
Exchange backup
Exchange backup was not checking for missing DB files to ensure a DB was available for backup. This has been resolved.
Mixed case database filename extensions could cause databases to not be backed up. This has been resolved.
Various
Various minor fixes and changes to improve Macrium Reflect.
New update Bug fixes and Improvements v7.3.5550 - 18th January 2021
Macrium Task Scheduler
Under Edit Defaults > Scheduler, we've added a checkbox to prevent the system from sleeping while scheduled scripts are running. Sleep is always prevented while the backup itself is being taken, but this checkbox will also prevent sleep while the rest of the script is running.
When waking the computer from sleep, or booting up when Windows Fast Boot is enabled, missed scheduled backups would start running immediately without giving the user time to log in and view the Postpone Backup pop-up message. This has been resolved.
On some desktops, the 'Start the task only if the computer is on AC power' option would prevent scheduled backups from running even though no battery was present. This has been resolved.
Rescue Media
If the ProgramData folder and the Reflect installation folder were on different drives, then Reflect would be unable to download Windows PE. This has been resolved.
Backup_running
A failed backup, due to power failure or removing the target drive, could cause the next backup to fail by detecting, but not deleting, the 'backup_running' mutex file. This has been resolved.
viBoot
viBoot can now handle images of system disk with 4K sectors.
Retention Purge
"Run purge before backup" could cause the current set Full backup to be purged when running a Diff or Inc. This has been resolved.
MIG - Server Plus
SQL backups to MIG protected network shares is now supported.
Various
Various minor fixes and changes to improve Macrium Reflect.
Bug fixes and Improvements v7.3.5672 - 26th February 2021
Macrium Task Scheduler
A scheduled backup that sleeps or hibernates the PC after completion could wake the PC a short time after completion. This has been resolved.
Missed scheduled backups for the same backup definition may not honor the Full/Diff/Inc order of precedence when starting causing an Incorrect number of backups to run. This has been resolved.
Retention Purge
Differential retention could report an incorrect number of Differentials found in the backup log. This has been resolved.
Bug fixes and Improvements v7.3.5758 - 22nd March 2021
Server Plus - Exchange Mailbox Restore
When filtering by message type, the Mailbox Restore wizard would not always display the correct description for the filter being applied. This has been resolved.
When applying a default message filter, all messages would be filtered out. This has been resolved.
Rescue Media Builder
RMBuilder could fail to retain its configuration state after build failure. This has now been resolved.
Backup Definitions View
The 'Type' column wasn't populated with the definition type. This has now been resolved.
File and Folder Restore
The time taken to restore has now been added to the end of the restore log.
Macrium Reflect v8.0 - First Public Release
We're excited to announce the official release of Macrium Reflect v8.0.
Macrium Reflect v8.0 has been comprehensively overhauled to provide a better user experience, and we've added some great new functionality as well...
Resilient File System (ReFS) and exFAT support
Dark Theme
Intra-Daily scheduled backups
Removable media Imaging and Cloning support
Automatic partiton resizing when restoring or cloning to different sized disks
New 'Existing Backups' view
Improved File and Folder backup wizard
Improved backup file name functionality
New tbFAT driver for mounting File and Folder backups
Redesigned and Improved 'Log' view
OAuth 2.0 email authentication for Gmail and Outlook 365
New update Bug fixes and Improvements v8.0.5928 - 25th May 2021
Reflect UI Font
We've changed the menu fonts used in v8.0 to be the same face and point size as in v7.x. A future update will add additonal configuration options.
Main Toolbar
The main application toolbar can now by hidden to save space. Take the 'View' > 'Toolbar' menu option.
Log View
To save screen space, we've added a Show/Hide button for the filter options in the Log View.
Logs were not being purged on startup when the retention was set for zero days. This has been resolved.
We've resolved a crash when loading log files that are empty.
File and Folder
File and Folder backups could incorrectly report access denied for some files when backing up. This has been resolved.
The copied files list now shows Modified and Created dates in local time rather than UTC.
Installer
The 32 bit installer could crash unexpectedly on some systems. This has been resolved.
Password Reveal
Password reveal box now supports Windows Hello PIN authentication..
MS Outlook 365
We've fixed a problem with Outlook personal account usage in the MS Outlook 365 Email Settings
New update Bug fixes and Improvements v8.0.5942 - 29th May 2021
Windows XP
Some 32 bit components could error during initialization when running on Windows XP. This has been resolved.
Shutdown after Backup
We've resolved a problem that caused the power settings after a backup to not be honored.
Exchange
Exchange backups would not correctly group by year when selecting a backup to restore from. This has been resolved.
Scheduled Backups View
A rare program error could occur in the schedule history view when retrieving audit history records. This has been resolved.
UI Improvements
Some Windows installations, including, but not limited to, Japanese and Chinese traditional, could substitute the UI font with an incorrect typeface. This has been resolved.
Image Guardian Event Viewer did not correctly display Warning icons. This has been resolved.
Technicians License
The Technicians Portable application could display an incorrect expiry date in the application title bar. This has been resolved.
Batch Backups
Backups run in 'batch mode', using a script by passing parameters to the Reflect command line would incorrectly show a completion dialog. This has been resolved.
viBoot
viBoot could fail to load v8 encrypted image files. This has been resolved.
Various
Various minor fixes and changes to improve Macrium Reflect.
Bug fixes and Improvements v8.0.5946 - 1st June 2021
BitLocker Restore
We've resolved a problem that caused partitions encrypted with BitLocker to fail to be restored if the BitLockered partition wasn't the first partition in the restore sequence, and a 'BitLocker live'restore was initiated. We recommend re-building your rescue media if your system uses BitLocker encryption, or if you're unsure.
Bug fixes and Improvements v8.0.5963 - 7th June 2021
Cloning
When running clone jobs in 'batch' mode the clone dialog would incorrectly be shown at the end of the job. This has been resolved.
The taskbar icon could be hidden for scheduled clone jobs. This has been resolved.
Windows PE
If Windows PE has a low horizontal screen resolution of 800 pixels or less, then the restore/clone dialog could be 'clipped', rendering the 'Finish' button inaccessible. This has been resolved.
ReflectUI.exe
ReflectUI could generate a program error on Windows 8.1 and Server 2012 and cause multiple icons to appear in the notification area. This has been resolved.
Backup to DVD/CD
Reflect could generate a program exception when ejecting optical media at the end of a backup. This has been resolved.
File and Folder Backup
When searching password protected/encrypted File and Folder backups, the entered correct password was rejected causing the search to fail. This has been resolved.
Retention Warning
The backup completion warning, when the retention purge deletes all backups prior to running the backup, wasn't being suppressed if the retention rules were explicitly set to retain 1 Full. This has been resolved.
Various
Various minor fixes and changes to improve Macrium Reflect.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
