Solved Mobile Intel Series 4 and Intel HD Graphics 1st Generation

There's no difference between my modified driver an the one on the Intel website. Only more hardware Id's. What are your hardware ID's Ill go build you a custom one or identify what card you have. Also all the drivers I post are up to date.







"Intel HD 2000/3000 Windows 8 Fix"
|
|
|
V

Here we go :


PCI\VEN_8086&DEV_0116&SUBSYS_05061025&REV_09
PCI\VEN_8086&DEV_0116&SUBSYS_05061025
PCI\VEN_8086&DEV_0116&CC_030000
PCI\VEN_8086&DEV_0116&CC_0300

note: i have installed this while i check the hardware id :thumb:
can i ask for mediafire link please, thank you. :D
 
@Dleader thanks for the reply sir. but the drivers I downloaded from here is version 8.15.10.whatever (WDDM 1.1)aint it supposed to be 9.17.10.whatever (WDDM 1.2 ?) ?
 
There's no difference between my modified driver an the one on the Intel website. Only more hardware Id's. What are your hardware ID's Ill go build you a custom one or identify what card you have. Also all the drivers I post are up to date.







"Intel HD 2000/3000 Windows 8 Fix"
|
|
|
V

Here we go :


PCI\VEN_8086&DEV_0116&SUBSYS_05061025&REV_09
PCI\VEN_8086&DEV_0116&SUBSYS_05061025
PCI\VEN_8086&DEV_0116&CC_030000
PCI\VEN_8086&DEV_0116&CC_0300

note: i have installed this while i check the hardware id :thumb:
can i ask for mediafire link please, thank you. :D

How about this, is still undone or its cant be undone...thank you.
 
@ akungz - It can be done, but adding Hardware ID's only allow the driver to be installed on a device. You're having problems with metro right? It's either the driver (incompatibility) or its a software issue. If you are able to install the driver we don't need to add more Hardware ID's.

Also make sure your resolution is higher than 1024x768. Since metro apps wont work if it's too low.
 
Yes i'm having problem with Metro when I used Intel HD Second Gen x64_2792 from yours, but great for game and graphics.
but when i using driver from win8 or from intel its self, i used having trouble with graphics and game.
so what the best conclusion for me...?
Thank you


note my resolution is 1366x768.
 
Hi there, I have intel core i3 first gen and on windows 8 release preview. I have followed all instructions but when i go to install it on my computer it says setup has stopped because some or all drivers have failed to install. what do I do?
 
Hi there, I have intel core i3 first gen and on windows 8 release preview. I have followed all instructions but when i go to install it on my computer it says setup has stopped because some or all drivers have failed to install. what do I do?
You installed the custom certificate installer right? If you did proceed to run the following:

Hit the combo of Windows Key + R and type cmd. In the taskbar right click the cmd box and right click command prompt. Then choose run as administrator (Or you can go to C:\windows\system32 and run cmd as administrator)
Next run the command bcdedit.exe /set testsigning on
Retry the installation of the driver.
 
Yes i'm having problem with Metro when I used Intel HD Second Gen x64_2792 from yours, but great for game and graphics.
but when i using driver from win8 or from intel its self, i used having trouble with graphics and game.
so what the best conclusion for me...?
Thank you


note my resolution is 1366x768.
Try the windows 7 HD 3000 Driver.

Here's a modded version which lets you install to Windows 8.
 
Last edited:
Thanks i just installed, and work fine until now.
and what Test Mode water mark on the right corner mean...
Is it okay if i remove it...
I was try this bcdedit.exe /set testsigning off
once i restart my laptop my display going to low resolution..
how i fix it...
thank you
 
Last edited:
Thanks i just installed, and work fine until now.
and what Test Mode water mark on the right corner mean...
Is it okay if i remove it...
I was try this bcdedit.exe /set testsigning off
once i restart my laptop my display going to low resolution..
how i fix it...
thank you

I had the same problem.

Unfortunatly you can't turn off the testsigning.

Leave it on and get used to the watermark.

Nothing will change on your PC (aside from the watermark), don't worry.

The performance gain will pay for this little issue, IMO. :geek:
 
Thanks i just installed, and work fine until now.
and what Test Mode water mark on the right corner mean...
Is it okay if i remove it...
I was try this bcdedit.exe /set testsigning off
once i restart my laptop my display going to low resolution..
how i fix it...
thank you

I had the same problem.

Unfortunatly you can't turn off the testsigning.

Leave it on and get used to the watermark.

Nothing will change on your PC (aside from the watermark), don't worry.

The performance gain will pay for this little issue, IMO. :geek:

Wow that sadly....:cry:
but as you said the performance gain will pay for this little issue :cool:
-----------------------------------------------------------------------------

update: my browser sometime blink and blur and shake :think:.
i used GC and IE
 
Last edited:
Ok. So I tried your drivers on Win 8 final and they're no different to the supplied drivers. I've uninstalled and reinstalled back to the official ones but how do I go about uninstalling your custom installer so I no longer have the TEST MODE watermark?
 
Ok. So I tried your drivers on Win 8 final and they're no different to the supplied drivers. I've uninstalled and reinstalled back to the official ones but how do I go about uninstalling your custom installer so I no longer have the TEST MODE watermark?
first of all uninstall the drivern and restart..then simply use this comand on command prompt bcdedit.exe /set testsigning off
Restart again, then u can instal the latest driver from the official. Mine its working
 
Back
Top