Latest Logitech SetPoint Software

[Nemix]

Latest Logitech SetPoint Registration Startup has memory leak problem.

 

[lotherius]

The link in the OP isn't very useful. It doesn't link to the latest SetPoint software, instead it just links to the support & downloads page.

I have an MX 610, which is supposedly supported by Windows 8 according to Logitech's FAQ, but if you drill down to the download page for it, it only offers SetPoint 4.8, which silently fails to install on Windows 8 (says it installed but didn't)...

A better link would be: Support + Downloads: SetPoint - Logitech

 

[esspee]

I just picked up the Touch T400 mouse and have a HUGE complaint about the 6.51 setpoint software. There are no button profiles. The mouse itself has a glide pad in place of the wheel so you touch for horizontal and vertical scroll. That is nice although so far not as smooth as a physical wheel....maybe just a learning curve.

There are also two buttons under the glide pad - one at the front and one at the back. So technically this is a 4 button mouse. Unfortunately the setpoint software only lets you configure two basic and useless options to these extra buttons - making them flip through apps or launch start. And, unlike the MS mouse software, you cannot set up specific profiles for games/programs. So if you setup a button as Start in Win8 it will always stay that way even when you are in a game or app where jumping to start is not an option you want at your fingertips.

So, just a word of advice, stay away from the T400 if you want anything other than a two button mouse with 4 way touch and a quick 'start' menu button. It technically has 4 buttons but is bare bones worthless for what Logitech lets you configure them for.

 

[Brink]

New 6.52.74 Logitech SetPoint drivers released. See first post for more details.

 

[esspee]

Thanks for the heads up.

I have the Zone Touch T400. I was hoping the update would allow me to customize the front and rear buttons under the touch strip to my liking. Unfortunately it does not.

Previously I could toggle the two touch strip buttons between only two option - "show start screen" and "flip apps". They have added a third option now and you can choose to toggle between desktop but still no options for "all apps", "charms" or "multitask bar"...all of which I would find more useful on my mouse.

Sadly I would not recommend this mouse to anyone. The "touch" is more of a useless gimmick that lacks the precision of a wheel and the rudimentary customization provides no advantage over a standard 3, 4 or 5 button mouse which can just as easily be configured to bounce to the Start Screen.

 

[Hybrid Vigor]

Version 6.6 is released. Fixed an issue on some systems causing dwm.exe hogging high cpu load on locked systems. Mine was concerned too.

 

[Brink]

Version 6.6 is released. Fixed an issue on some systems causing dwm.exe hogging high cpu load on locked systems. Mine was concerned too.

Thank you Vigor.

Must not be for all models yet. I'm still showing 6.52.74 for mine.

 

[alphanumeric]

I noticed if I selected windows 7 it offered up 6.52, if I selected Windows 8 it offered up 6.6.

EDIT: I take that back, it offers up 6.52 for my M570 for Windows 8 and Windows 7.
If you go here though, Support + Downloads: SetPoint - Logitech and select Windows 8 you'll get 6.6. It's the link lotherius posted above.

 

[Mark Phelps]

I noticed if I selected windows 7 it offered up 6.52, if I selected Windows 8 it offered up 6.6.

EDIT: I take that back, it offers up 6.52 for my M570 for Windows 8 and Windows 7.
If you go here though, Support + Downloads: SetPoint - Logitech and select Windows 8 you'll get 6.6. It's the link lotherius posted above.

I went there, selected Windows 8 -- and STILL get the v6.52.74 that others are mentioning.

 

[alphanumeric]

I just tried it again and got the 6.52. I downloaded 6.6 this morning, I could have sworn it was from that link? Did they pull the 6.6 version already?

 

[alphanumeric]

6.52 is the highest version on their FTP site, ftp://ftp.logitech.com/pub/techsupport/mouse/
I haven't tried to install the 6.6 yet, I'm on my Windows 7 desktop and only run 6.32 on that. I'm not sure I want to even try the 6.6 on my 8 laptop now? Anybody else download and install 6.6?

EDIT: ops, it looks like 6.6 is there on the FTP site its just not where I expected it to be in the list.
ftp://ftp.logitech.com/pub/techsupport/mouse/setpoint6.60.170_32.exe
ftp://ftp.logitech.com/pub/techsupport/mouse/setpoint6.60.170_64.exe

 

[Hybrid Vigor]

I used the update option within Setpoint 6.52 and 6.6 got installed and works good in my 8 system.

 

[alphanumeric]

Tried 6.60 on my Windows 7 desktop. It hangs on shutdown waiting for something to close and the force shutdown list is blank. It does eventually shut down but its a good 8 second delay before it does. Same problem I had with 6.52. Back to 6.32 for me.

 

[Brink]

New 6.61.15 Logitech SetPoint drivers released. See first post for more details.

 

[alphanumeric]

I tried 6.61.15 on my Windows 7 desktop. It still hangs on shutdown waiting for something to close and the force shutdown list is blank. The delay is now shorter but it still hangs for a couple of seconds. They keep saying they have fixed that problem but not as far as I can see. Back to 6.32 for me.

EDIT: Seems to work OK on my 8 laptop, time will tell though.

 

[Hybrid Vigor]

Version 6.65 is out

 

[Brink]

Thank you Vigor. First post updated.

 

[alphanumeric]

Already installed on my desktop PC, no issues as far as I can tell.

 

[erpster4]

version 6.67.82 of Setpoint posted July 29 to add Windows 10 support

 

[Brink]

Thank you erpster.