• This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn more.

I always get a BSOD on boot, caused by ntoskrnl.exe


Posts
3
#1
Hey everyone, after checking these forums for some time now, I decided to finally post my problems and get some help.

I got my pc about 2 weeks ago, and ever since I got it, almost always there is a BSOD on boot, but after that I am able to use it just fine.. it has just gotten sort of frustrating. I even did a system reset, but that did not work at all.

I would gladly appreciate it if somebody could help me out, and if I forgot to include anything else, please tell me :)
 

My Computer

System One

  • OS
    Windows 8.1 64-bit
    Computer type
    PC/Desktop
    CPU
    AMD FX-6300
    Motherboard
    GB 970A-UD3P
    Graphics Card(s)
    AMD R9 270
Posts
20
#2
0x0000000A error is IRQL_NOT_LESS_OR_EQUAL. I saw that you had multiple dump files; I checked the more recent ones. You must check that your computer is compatible with Windows.

I would advise you to run sfc /scannow; I don't really know much about BSODs, but that command is very helpful for problems related to software.

Well, I think that software is the problem here; try the command I gave you and see what will happen. Most likely you have a faulty device driver, system service, or BIOS. If this is the case, press F8 while Windows is booting. This will show you the Advanced Boot Options menu. Select "Last Known Good Configuration".

In case you have an incompatible device driver, system service, virus scanner, or backup tool, run the system diagnostics of your computer manufacturer (especially the memory one). For details on these procedures, see the owner's manual for your computer. If your system has small computer system interface (SCSI) adapters, contact the adapter manufacturer to obtain updated Windows drivers. Try disabling sync negotiation in the SCSI BIOS, checking the cabling and the SCSI IDs of each device, and confirming proper termination. For integrated device electronics (IDE) devices, define the onboard IDE port as Primary only. Also, check each IDE device for the proper master/subordinate/stand-alone setting. Try removing all IDE devices except for hard disks.

If your computer is fine, let us know. If it is not, we will try to give you as much help as we can.

These solutions are for 0x0000000A BSODs.
 

My Computer

System One

  • OS
    Windows 7 Professional SP1 64-bit
    Computer type
    Laptop
    System Manufacturer/Model
    Lenovo G580 20150
    CPU
    Intel Core i3-3110M 2.40 GHz
    Motherboard
    Lenovo U3E1 (Ivy Bridge)
    Memory
    GDDR3 4 GB Single Channel
    Graphics Card(s)
    Intel HD Graphics 4000, Nvidia GeForce 610M
    Sound Card
    Conexant SmartAudio HD
    Monitor(s) Displays
    Generic PnP Monitor, Sony BRAVIA KDL-46D3500
    Screen Resolution
    1366x768, 1920x1080
    Hard Drives
    Seagate ST1000LM024 HN-M101MBB
    Internet Speed
    470 KB/s
    Browser
    Internet Explorer 11, Google Chrome
    Antivirus
    Microsoft Security Essentials
    Other Info
    VMware Workstation 11, Adobe Creative Suite 5 Master Collection, Office 2007 Enterprise, Office 2010 Professional Plus, VOCALOID 4, MMD, DVDVideoSoft Free Studio
Posts
3
#3
Hi, I appreciate the reply :)
I updated my drivers yesterday, but still nothing. I got another blue screen today(I will post the dump files)
I ran the sfc scan, but I was presented with: "Windows Resource Protection found corrupt files but was unable to fix some of them" what should I do now?
 

My Computer

System One

  • OS
    Windows 8.1 64-bit
    Computer type
    PC/Desktop
    CPU
    AMD FX-6300
    Motherboard
    GB 970A-UD3P
    Graphics Card(s)
    AMD R9 270
Posts
20
#4
  1. Open Memory Diagnostics Tool by clicking the Start button
    , and then clicking Control Panel. In the search box, type Memory, and then click Diagnose your computer's memory problems.*
    If you're prompted for an administrator password or confirmation, type the password or provide confirmation.
  2. Choose when to run the tool.

    Since the culprit must be the memory, you have to test it with this tool.
    As for sfc /scannow, it won't fix your memory problems.
    Try the bundled-with-Windows memory diagnostics tool and let me know what happened.
 

My Computer

System One

  • OS
    Windows 7 Professional SP1 64-bit
    Computer type
    Laptop
    System Manufacturer/Model
    Lenovo G580 20150
    CPU
    Intel Core i3-3110M 2.40 GHz
    Motherboard
    Lenovo U3E1 (Ivy Bridge)
    Memory
    GDDR3 4 GB Single Channel
    Graphics Card(s)
    Intel HD Graphics 4000, Nvidia GeForce 610M
    Sound Card
    Conexant SmartAudio HD
    Monitor(s) Displays
    Generic PnP Monitor, Sony BRAVIA KDL-46D3500
    Screen Resolution
    1366x768, 1920x1080
    Hard Drives
    Seagate ST1000LM024 HN-M101MBB
    Internet Speed
    470 KB/s
    Browser
    Internet Explorer 11, Google Chrome
    Antivirus
    Microsoft Security Essentials
    Other Info
    VMware Workstation 11, Adobe Creative Suite 5 Master Collection, Office 2007 Enterprise, Office 2010 Professional Plus, VOCALOID 4, MMD, DVDVideoSoft Free Studio
Posts
3
#5
I ran the Memory diagnostic, and there were no errors.. I am kind of giving up at this point in trying to solve the issue :/
 

My Computer

System One

  • OS
    Windows 8.1 64-bit
    Computer type
    PC/Desktop
    CPU
    AMD FX-6300
    Motherboard
    GB 970A-UD3P
    Graphics Card(s)
    AMD R9 270
Posts
20
#6
The only thing I can tell you to do now is System Restore to a point in which these BSODs never occured. Otherwise the other steps I can give you is debugging, but I haven't tried it, so I don't know what it will do to your computer. You can also check System Log in Event Viewer,should you have any incompatible device driver,virus scanner, backup tool or system service.
 

My Computer

System One

  • OS
    Windows 7 Professional SP1 64-bit
    Computer type
    Laptop
    System Manufacturer/Model
    Lenovo G580 20150
    CPU
    Intel Core i3-3110M 2.40 GHz
    Motherboard
    Lenovo U3E1 (Ivy Bridge)
    Memory
    GDDR3 4 GB Single Channel
    Graphics Card(s)
    Intel HD Graphics 4000, Nvidia GeForce 610M
    Sound Card
    Conexant SmartAudio HD
    Monitor(s) Displays
    Generic PnP Monitor, Sony BRAVIA KDL-46D3500
    Screen Resolution
    1366x768, 1920x1080
    Hard Drives
    Seagate ST1000LM024 HN-M101MBB
    Internet Speed
    470 KB/s
    Browser
    Internet Explorer 11, Google Chrome
    Antivirus
    Microsoft Security Essentials
    Other Info
    VMware Workstation 11, Adobe Creative Suite 5 Master Collection, Office 2007 Enterprise, Office 2010 Professional Plus, VOCALOID 4, MMD, DVDVideoSoft Free Studio

Users Who Are Viewing This Thread (Users: 0, Guests: 1)