hal.dll+37213 BSOD that has haunted me for over a month

[AGgroDahlia1147]

Using bluescreenview, I have the four dumps included in the attachment spanning the last month that have the exact same two notes in them: All of the minidumps reference hal.dll+37213 as well as ntoskrnl.exe+1c5f2d as the problem causing the bluescreen. If anyone has any suggestions for what I can do for this, that would be super awesome!

 

[axe0]

Hi AGgroDahlia1147,

It is a 0x124 WHEA_UNCORRECTABLE_ERROR (Windows Hardware Error Architecture)
This means that you have some hardware damage, unfortunately this error rarely gives enough information for a specific cause.
Fortunately, this error is mostly caused by overclocking or drivers.

STOP 0x124 Troubleshooting

Read carefully before proceeding.

   Warning

If you're overclocking your system, revert back to stock clocks now.

   Note

Test the system once the overclock is removed before continuing with the steps outlined below.

Part One: CPU Stress Test
Part Two: MemTest86+ RAM Diagnostic
Part Three: Hard Drive Diagnostics
Part Four: GPU Stress Test

ONE

CPU TEST

Run Prime95 to stress test your CPU. Prime95 - Stress Test Your CPU - Windows 10 Forums

   Warning

Your CPU temperatures will rise quickly while under this stress test. Keep a keen eye on them and abort the test if overheating occurs.

TWO

RAM TEST

Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums

   Note

MemTest86+ needs to be run for at least 8 passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.

THREE

HDD TEST

Run SeaTools to check the integrity of your HDD. http://www.sevenforums.com/tutorials/313457-seatools-dos-windows-how-use.html

   Note

Do not run SeaTools on an SSD as the results will be invalid.

Run chkdsk http://www.sevenforums.com/tutorials/433-disk-check.html

FOUR

GPU TEST

Run Furmark to stress test your GPU. FurMark - GPU Stress Test - Windows 10 Forums

   Note

Run Furmark for around 30 minutes.

   Warning

Your GPU temperatures will rise quickly while Furmark is running. Keep a keen eye on them and abort the test if overheating occurs.