Z zman12298 New Member Messages 1 Jan 6, 2014 #1 this is my first post, I have a windows 8 machine that I want to install windows 7 hp on. It wont get past the starting windows screen when I boot off the dvd. if you have encountered the same problem please help
this is my first post, I have a windows 8 machine that I want to install windows 7 hp on. It wont get past the starting windows screen when I boot off the dvd. if you have encountered the same problem please help
archer New Member VIP Member Power User Messages 1,034 Location India Jan 7, 2014 #2 Hi zman, Welcome to 8F. Follow this tutorial http://www.eightforums.com/tutorial...allation-windows-8-windows-7-vista.html?ltr=D Hope this helps.
Hi zman, Welcome to 8F. Follow this tutorial http://www.eightforums.com/tutorial...allation-windows-8-windows-7-vista.html?ltr=D Hope this helps.
theog VIP Member VIP Member Gold Member Messages 5,591 Jan 7, 2014 #3 Welcome to EightForums Is this a OEM manufacturer's PC with Pre-installed Windows 8? 1) Downgrade to Windows 7. http://www.eightforums.com/tutorials/13326-downgrade-windows-8-windows-7-a.html Warning you must have the UEFI/BIOS firmware setting in Step Three set. Make sure you read the NOTE at Step three. 2) If Using a USB Pen drive on a PC with a UEFI BIOS. USB Pen drive need to be formatted to FAT32 as in http://www.eightforums.com/tutorials/15458-uefi-bootable-usb-flash-drive-create-windows.html Take note of Step 11 for Windows 7. Also you will need to use a USB 2.0 port, as there are no USB 3.0 drivers in Windows 7. You will need to buy Windows 7.
Welcome to EightForums Is this a OEM manufacturer's PC with Pre-installed Windows 8? 1) Downgrade to Windows 7. http://www.eightforums.com/tutorials/13326-downgrade-windows-8-windows-7-a.html Warning you must have the UEFI/BIOS firmware setting in Step Three set. Make sure you read the NOTE at Step three. 2) If Using a USB Pen drive on a PC with a UEFI BIOS. USB Pen drive need to be formatted to FAT32 as in http://www.eightforums.com/tutorials/15458-uefi-bootable-usb-flash-drive-create-windows.html Take note of Step 11 for Windows 7. Also you will need to use a USB 2.0 port, as there are no USB 3.0 drivers in Windows 7. You will need to buy Windows 7.