Solved Crashes 0x3b, 0xd1, 0x133, 0xa

[essenbe]

I don't see anything different. No more dump files though.

 

[simrick]

Okay so I ran this Unigine for about 20 minutes and the MB was at about 64C, the CPU was at about 59C, and the HDD was in the high 30s. The graphics were fine. I don't know how/if it collects data?

 

[simrick]

I don't see anything different. No more dump files though.

No, no more dump files because I have never had it BSOD for me.....

 

[essenbe]

That's fine. I usually run the Benchmark, but it isn't necessary. Seems a little warm for the Motherboard, but the CPU sounds good. I don't believe the burn in test collects data, but most importantly, it didn't crash and didn't show any artifacts.

What would you like to try next? I'll leave it up to you, you have the computer and know better how it's running.

 

[simrick]

That's fine. I usually run the Benchmark, but it isn't necessary. Seems a little warm for the Motherboard, but the CPU sounds good. I don't believe the burn in test collects data, but most importantly, it didn't crash and didn't show any artifacts.

That's because I don't know what I'm doing, and there are no instructions on the web site....if I click on benchmark, does it finish on its own? Does a window popup and show some stats? I've never run this before.

What would you like to try next? I'll leave it up to you, you have the computer and know better how it's running.

Want to try the Driver Verifier next?

 

[simrick]

View attachment 65531

I ran it again

 

[essenbe]

That's fine. You didn't have to do the benchmark, the numbers mean little anyway. It will just work it a little harder, I think.

Ok, Driver Verifier. It works the same in all versions. Just make sure you create a restore point before doing anything. Driver Verifier - Enable and Disable in Windows 10 - Windows 10 Forums


[video=youtube;BjsofLPNosc]https://www.youtube.com/watch?v=BjsofLPNosc[/video]

 

[simrick]

Oki doki. Turning it on now.

 

[simrick]

Just for the heck of it, I ran the ESET Online Scanner:

C:\Program Files (x86)\Unchecky\uninstall.exe a variant of Win32/InstallCore.ACL potentially unwanted application cleaned by deleting - quarantined
C:\Program Files (x86)\Unchecky\bin\collector.dll a variant of Win32/InstallCore.ACL potentially unwanted application cleaned by deleting - quarantined
C:\Program Files (x86)\Unchecky\bin\icuid.dll Win32/InstallCore.ACL potentially unwanted application cleaned by deleting - quarantined
C:\Users\Vince\AppData\Local\Temp\is1818472417\165258_stp\RAM.dll a variant of Win32/InstallCore.ACL potentially unwanted application cleaned by deleting - quarantined
C:\Users\Vince\AppData\Local\Temp\is1818472417\980317_stp\RAM.dll a variant of Win32/InstallCore.ACL potentially unwanted application cleaned by deleting - quarantined
C:\Users\Vince\Downloads\ccsetup509.exe Win32/Bundled.Toolbar.Google.D potentially unsafe application deleted - quarantined
C:\Users\Vince\Downloads\unchecky_setup.exe a variant of Win32/InstallCore.ACL potentially unwanted application cleaned by deleting - quarantined
C:\Windows\System32\roboot64.exe a variant of Win64/Systweak.A potentially unwanted application cleaned by deleting - quarantined


Everything is a PUP - he once had some OptimizerPro system tweaker software on here....

I've been doing everything on here with a clean boot; I've switched back to normal boot now.

 

[essenbe]

Good luck uninstalling Unchecky.

 

[simrick]

Good luck uninstalling Unchecky.

Seriously? What makes you say that?

Edit: I just uninstalled it now. No problems.

 

[essenbe]

I uninstalled it, use CCleaner and the icon is still there. I did manage to hunt it down and manually uninstalled it. But...

 

[blueelvis]

Sorry for the bump in Steve

@Simrick - Are you still facing any Blue Screen of Deaths? If yes, then please let me know. I would suggest not running the steps on your own (Like running ESET). That could complicate the things further.



-Pranav

 

[essenbe]

Blueelvis, no problem jumping in. I had asked Simrick to run ESET in post 25.

 

[blueelvis]

Blueelvis, no problem jumping in. I had asked Simrick to run ESET in post 25.

Thanks!

I did not notice the post #25. Let's hope the problems are resolved on user's side


-Pranav

 

[simrick]

I uninstalled it, use CCleaner and the icon is still there. I did manage to hunt it down and manually uninstalled it. But...

Strange, although I immediately delete desktop icons when I install stuff.

So do you have any idea what this might be?

View attachment 65535

Not a single BSOD since enabling driver verifier. I was thinking I would run the Heaven benchmark again, then take the graphics update in WU, then run the benchmark once more.
I also received the GWX this morning.

View attachment 65536

I've never seen that comment about not being able to use the Guest account - is that something that happens on the Core version? or, is there no guest account in W10 at all?

 

[simrick]

Sorry for the bump in Steve

@Simrick - Are you still facing any Blue Screen of Deaths? If yes, then please let me know. I would suggest not running the steps on your own (Like running ESET). That could complicate the things further.

-Pranav

To my dismay, I have not yet been able to make this thing crash. But it was crashing for my friend, and the codes were all over the place.

Blueelvis, no problem jumping in. I had asked Simrick to run ESET in post 25.

Thanks!

I did not notice the post #25. Let's hope the problems are resolved on user's side


-Pranav

Here is the problem now: on boot, the HDD is pegged at 100% for 3 minutes. The desktop refreshes after about 1-1/2 minutes of loading. I can't figure out what's doing it. Also, if I close the lid, or walk away and the computer sleeps, when I wake it, I get a light blue screen (where the login should be), but there's nothing - just the empty screen. I waited for 3 minutes or so, constantly moving the mouse and after three minutes the login appeared.

My friend said, this is what started things, and he let it go instead of getting it to me, and eventually the BSODs began. That's when I got it.

 

[simrick]

I just ran the dism /Online /Cleanup-Image /StartComponentCleanup tool and it finished (successfully) in about 4 seconds(?).
I am running the dism /Online /Cleanup-Image /Restorehealth tool now.

EDIT:

View attachment 65539

Same error 0x800f0906

Checking System Update Readiness.

(p) CSI Payload Corrupt amd64_microsoft-windows-c..ributed-panocapture_31bf3856ad364e35_6.3.9600.16408_none_45f1490286a15cb9\CameraUtilities.dll
Repair failed: Missing replacement payload.
(p) CSI Payload Corrupt amd64_microsoft-windows-c..ributed-panocapture_31bf3856ad364e35_6.3.9600.16457_none_45ba391c86cacf17\CameraUtilities.dll
Repair failed: Missing replacement payload.
(p) CSI Payload Corrupt amd64_microsoft-windows-c..ributed-panocapture_31bf3856ad364e35_6.3.9600.16477_none_45a4994486db06f9\CameraUtilities.dll
Repair failed: Missing replacement payload.

Summary:
Operation: Detect and Repair
Operation result: 0x800f0906
Last Successful Step: Entire operation completes.
Total Detected Corruption: 3
CBS Manifest Corruption: 0
CBS Metadata Corruption: 0
CSI Manifest Corruption: 0
CSI Metadata Corruption: 0
CSI Payload Corruption: 3
Total Repaired Corruption: 0
CBS Manifest Repaired: 0
CSI Manifest Repaired: 0
CSI Payload Repaired: 0
CSI Store Metadata refreshed: True

Total Operation Time: 1382 seconds.

Every time I search this error, I keep getting references to .NET 3.5. It is partially installed on here - should I go ahead and fully install it?

View attachment 65541

Or, should I uninstall and download from MS and reinstall?

 

[axe0]

Apologies to bump in too, just want to say 1 thing

I just ran the dism /Online /Cleanup-Image /StartComponentCleanup tool and it finished (successfully) in about 4 seconds(?).

Hi simrick,

When dism /Online /Cleanup-Image /StartComponentCleanup finishes in a couple of seconds, it means that there is nothing to clean.
You can find out if it is necessary to use dism /Online /Cleanup-Image /StartComponentCleanup by using the command

dism /Online /Cleanup-Image /AnalyzeCompontentStore

The result of running this command looks like:
View attachment 65540
What is pointed with an arrow is the answer that you need to know to find out if 'dism /Online /Cleanup-Image /StartComponentCleanup' is necessary to run.

 

[simrick]

Apologies to bump in too, just want to say 1 thing

I just ran the dism /Online /Cleanup-Image /StartComponentCleanup tool and it finished (successfully) in about 4 seconds(?).

Hi simrick,

When dism /Online /Cleanup-Image /StartComponentCleanup finishes in a couple of seconds, it means that there is nothing to clean.
You can find out if it is necessary to use dism /Online /Cleanup-Image /StartComponentCleanup by using the command

dism /Online /Cleanup-Image /AnalyzeCompontentStore

The result of running this command looks like:
View attachment 65540
What is pointed with an arrow is the answer that you need to know to find out if 'dism /Online /Cleanup-Image /StartComponentCleanup' is necessary to run.

Hi @axe0 and thanks for that info. At one point way back in this thread, there was some corruption - I was making sure it was gone. But that's good to know I can check to analyze the ComponentStore in the future. I have to admit, I was wondering if it even worked, it finished so quickly.