Cannot boot any bootable media on my Acer Switch 10

perfection

New Member
Messages
4
I have recently purchased an Acer Aspire Switch 10E.

This laptop does not have a legacy boot BIOS; It only has a UEFI boot.

Yes it has a secure boot option that can be enabled or disabled.

Yes i have set my boot priority to USB CD ROM (as this laptop comes without a CD-ROM)
To add to my woes i have read from reputed sources that the installed UEFI architecture is 32 bit type - which probably means that only a signed 32 bit UEFI boot driver can boot those disks.
I have some DVDs that i keep as emergency to restore images, recover files and data and maybe perform partition management actions that do not boot probably because of the reasons above.

DOES THIS MEAN THAT I AM TOTALLY DAMNED with respect to using these bootable disks on my new laptop?
I do not have much knowledge about all this and this post is what i have gleaned from searching on the web
Is there any workaround at all including modifying isos and adding 32 bit uefi boot files.

This is a great forum, I know, but do point me to a forum if one is indeed specialized in stuff like this
 

My Computer

System One

  • OS
    windows 8.1
Nothing on this issue

On my Gateway computer in the bios is the boot menu.
It was not enabled by default.
I enabled it & it told me to press F-12 at boot to get the boot manager where I could select the device to boot from.
Be it the computer's uefi drive or a dvd or usb drive.

Look in your bios to see if this is available for you . :)
 

My Computer

System One

  • OS
    Windows 8.1.1 Pro with Media Center
    Computer type
    PC/Desktop
    System Manufacturer/Model
    Gateway
    CPU
    AMD K140 Cores 2 Threads 2 Name AMD K140 Package Socket FT1 BGA Technology 40nm
    Motherboard
    Manufacturer Gateway Model SX2110G (P0)
    Memory
    Type DDR3 Size 8192 MBytes DRAM Frequency 532.3 MHz
    Graphics Card(s)
    ATI AMD Radeon HD 7310 Graphics
    Sound Card
    AMD High Definition Audio Device Realtek High Definition Audio USB Audio Device
    Monitor(s) Displays
    Name 1950W on AMD Radeon HD 7310 Graphics Current Resolution 1366x768 pixels Work Resolution 1366x76
    Screen Resolution
    Current Resolution 1366x768 pixels Work Resolution 1366x768 pixels
    Hard Drives
    AMD K140
    Cores 2
    Threads 2
    Name AMD K140
    Package Socket FT1 BGA
    Technology 40nm
    Specification AMD E1-1200 APU with Radeon HD Graphics
    Family F
    Extended Family 14
    Model 2
    Extended Model 2
    Stepping 0
    Revision ON-C0
    Instruction
    Browser
    Opera 24.0
    Antivirus
    Avast Internet Security
Thanks David
BUT perhaps you have not completely understood what I posted. F 12 has been enabled to show the devices I can boot from. But my laptop does NOT have a (legacy) BIOS - IT HAS ONLY A UEFI BOOT and that too a 32 bit UEFI firmware.
 

My Computer

System One

  • OS
    windows 8.1
I have the same problem with my ACER XC-603G. According to ACER, you will have to flash your BIOS (on the motherboard) to correct it.
You will then have an option to "Launch CSM" (Compatibility Support Module), which means Legacy BIOS.

https://acer.custhelp.com/app/answe...-to-enable-launch-csm-on-the-aspire-xc-603(g)

I'm not taking my chances on that, so I'm locked into Windows. This is the last ACER I'll ever buy!
 

My Computer

System One

  • OS
    Windows 8.1
    Computer type
    PC/Desktop
Back
Top