BSOD while playing games minidumps included

[Crusheddiamond]

I have been getting BSOD's for a while now and every time i do either the BSOD is blank (just blue screen no words) or the words are scrabbled.

Trying to at least get a gist of where I need to look for where this BSOD is coming from.

Any help at all would be great, zip file with dumps etc below

View attachment 66874

 

[lifetec]

All dumpfiles are:

  *******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 101, {10, 0, ffffd000ad8fb180, 6}
Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )
Followup: MachineOwner
---------
10: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************
CLOCK_WATCHDOG_TIMEOUT (101)
An expected clock interrupt was not received on a secondary processor in an
MP system within the allocated interval. This indicates that the specified
processor is hung and not processing interrupts.
Arguments:
Arg1: 0000000000000010, Clock interrupt time out interval in nominal clock ticks.
Arg2: 0000000000000000, 0.
Arg3: ffffd000ad8fb180, The PRCB address of the hung processor.
Arg4: 0000000000000006, 0.

But the dumpfiles all say Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )
That is in line with what you said

I have been getting BSOD's for a while now and every time i do either the BSOD is blank (just blue screen no words) or the words are scrabbled.

This bugcheck has as Usual causes: Device driver, BIOS bug, hardware defect (see Significant Posts section below)
a) BIOS bug
b) a driver whose activity is causing the target processor to lock up
c) a hardware defect (temperature, voltage, dust, RFI, outright borkedness...)

Your bios is already the prelast one.

I found in driverslist 2 old drivers from 2012 Thes drivers belong to a Logitech webcamera or security camera. I know that sometimes Logitech cameras are a source for BSOD.
Please update to a windows 8.1 compatible driver. Or disconnect the device and/or uninstall the drivers.

Check your Pc temperature, possible dust, the voltages of your mobo and your PSU.
Are there notices of devices not working or other problems.

 

[Crusheddiamond]

The logitech C920 camera is what I have but the drivers are the most up to date stright from logitechs website which sadly shows the 2012 driver for windows 7 and up to 10 as all the same driver.

Temps are good same with volts etc.

I will be disconnecting the webcam and uninstalling the drivers to see if that is the issue.

 

[Crusheddiamond]

BSOD again after uninstalling camera and disconnecting it

Tempted to install a clean install of windows 10 and keeping the system to the basics.