Windows 8 and 8.1 Forums


Anybody run an SFC after installing KB3022345?

  1. #1


    Posts : 1,121
    Windows 8.1 x64

    Anybody run an SFC after installing KB3022345?


    On my systems it seems this update, related to telemetry has a problem with some file with a .json extension. Running Dism to Restore the Health did not help for me so I uninstalled the update.

    I am thinking this is one optional update put out to allow the upgrade to Windows 10?

      My System SpecsSystem Spec

  2. #2


    Posts : 2,690
    Windows 3.1 > Windows 10


    on a clean install of just Windows 8.1 with all updates, to date, SFC pulls many mismatched file hashes..
      My System SpecsSystem Spec

  3. #3


    Posts : 1,121
    Windows 8.1 x64


    Well, ... I only got the one error on my three systems...

    I will normally try to track down what is causing the problem. For clean installs, it is normally the Canon Printer file which can be repaired with the DSIM command. The file in the update does not seem to respond to a repair operation.

    Maybe you could use the command below and post your text file so we can check yours.

    findstr /c:"[SR]" %windir%\Logs\CBS\CBS.log >"%userprofile%\Desktop\sfcdetails.txt"
      My System SpecsSystem Spec

  4. #4


    I ran sfc a few weeks ago and it was clean, as was DISM. Just ran it now (KB3022345 was installed 5/10/2015)

    Microsoft Windows [Version 6.3.9600]
    (c) 2013 Microsoft Corporation. All rights reserved.

    >dismandsfc - Thus is a batch file as follows:

    Dism /Online /Cleanup-Image /StartComponentCleanup
    Dism /Online /Cleanup-Image /RestoreHealth
    SFC /scannow


    >Dism /Online /Cleanup-Image /StartComponentCleanup

    Deployment Image Servicing and Management tool
    Version: 6.3.9600.17031

    Image Version: 6.3.9600.17031

    [==========================100.0%==========================]
    The operation completed successfully.

    >Dism /Online /Cleanup-Image /RestoreHealth

    Deployment Image Servicing and Management tool
    Version: 6.3.9600.17031

    Image Version: 6.3.9600.17031

    [==========================100.0%==========================]

    Error: 0x800f0906

    The source files could not be downloaded.
    Use the "source" option to specify the location of the files that are required to restore the feature. For more information on specifying a source location, see
    Configure a Windows Repair Source.

    The DISM log file can be found at C:\WINDOWS\Logs\DISM\dism.log

    >SFC /scannow

    Beginning system scan. This process will take some time.

    Beginning verification phase of system scan.
    Verification 100% complete.

    Windows Resource Protection found corrupt files but was unable to fix some
    of them. Details are included in the CBS.Log windir\Logs\CBS\CBS.log. For
    example C:\Windows\Logs\CBS\CBS.log. Note that logging is currently not
    supported in offline servicing scenarios.
      My System SpecsSystem Spec

  5. #5


    Posts : 1,121
    Windows 8.1 x64


    Ztruker, that is pretty much what my two systems did. I ended up uninstalling the update and the file was removed so SFC finished normally. Since it is an optional update, I assume that is OK.

    2015-05-10 18:58:13, Info CSI 0000083e [SR] Cannot repair member file [l:24{12}]"utc.app.json" of Microsoft-Windows-Unified-Telemetry-Client, Version = 6.3.9600.17747, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch

    2015-05-10 18:58:13, Info CSI 0000083f [SR] This component was referenced by [l:154{77}]"Package_2_for_KB3022345~31bf3856ad364e35~amd64~~6.3.1.5.3022345-2_neutral_GDR"
      My System SpecsSystem Spec

  6. #6


    I'll try uninstalling it and see what happens.
      My System SpecsSystem Spec

  7. #7


    Posts : 1,121
    Windows 8.1 x64


    I did uninstall it as I mentioned in the first post. It seems quite a few folks are having problems with this update. The file mentioned is not currently on my Windows 8.1 systems, as far as I can tell, until after the update install.

    Maybe they will fix it, but I have decided to not accept any optional updates for a while.
      My System SpecsSystem Spec

  8. #8


    N.Y.
    Posts : 2,214
    Windows 10 Pro 64bit


    This update https://support.microsoft.com/en-us/kb/3022345 became a recommended update, as i never installed it as an optional, after doing important and recommended updates on Tues. April 12 i have it now.

    I had 17 optional updates i never did then on last tues. they disappeared that explained it.

    Always had Diag Tracking service, but it was set to manual, after installed update was set to automatic as Support info on this update shows. I changed it back to manual, no errors or issues, been questioning this one in other posts here.
      My System SpecsSystem Spec

  9. #9


    N.Y.
    Posts : 2,214
    Windows 10 Pro 64bit


    Quote Originally Posted by Saltgrass View Post
    On my systems it seems this update, related to telemetry has a problem with some file with a .json extension. Running Dism to Restore the Health did not help for me so I uninstalled the update.

    I am thinking this is one optional update put out to allow the upgrade to Windows 10?
    You are right, after posting here, i to ran SFC showed files could not be repaired and used DISM did not work either, saw those files mentioned in CBS log. DISM in command prompt told me to go here https://technet.microsoft.com/en-us/.../hh825020.aspx something about using source file, lost here anyway

    So i uninstalled the update, reran SFC no integrity violations, DISM worked fine also.
      My System SpecsSystem Spec

  10. #10


    N.Y.
    Posts : 2,214
    Windows 10 Pro 64bit


    Quote Originally Posted by Saltgrass View Post
    I did uninstall it as I mentioned in the first post. It seems quite a few folks are having problems with this update. The file mentioned is not currently on my Windows 8.1 systems, as far as I can tell, until after the update install.

    Maybe they will fix it, but I have decided to not accept any optional updates for a while.
    Me too! Swore i did not install this optionally. True hand full of folks
      My System SpecsSystem Spec

Page 1 of 2 12 LastLast
Anybody run an SFC after installing KB3022345?
Related Threads
Just had my first ever W8.1 failure of an update to install. It was KB3022345, one of many optionals offered this morning. This update suggests it was to 'enable tracking' of diagnostics. Just putting that KB into Google and it seems to be a common failure point. Wonder if this update will get...
Installing 8.1 help. in Installation & Setup
I have an asus s500ca ultrabook it has a 24gb ssd which is being used as a cache drive and a 500gb HDD which has windows installed on it. If I wipe out the 500gb hdd and re-install windows 8.1 on it and leave the 24gb drive alone will it still act like a cache drive? Bryan
yesterday I got annoyed by win 8 on my Samsung NP900X3D and I started to instal windows as I normaly used to do on my older laptop...and here the problems started: - as the ultrabook doesn`t have a optical unit I must use an bootable USB - I delete and redo the partition with the previous...
Solved Installing ssd in Drivers & Hardware
I am intending to fit a Samsung 840 Pro 256GB ssd to my acer V3-571 laptop.The existing hdd is a Toshiba MQ01ABD100 1TB and is 9.5mms.The Samsung ssd is 7mms. and the ssd comes without a fitting kit.Can anyone tell me what I could use as a spacer or where to purchase one?
Installing Ram in Drivers & Hardware
I have an HP P7 1414 with windows 8 64bit with 6gb of ram. It has 4 slots for memory and the sticks are in the first and third slot. I purchased 2 sticks of 8gb each, same speed as the ram that came with the computer and I installed it in the 2nd and forth slots but my computer won't boot up. I'm I...
Installing XP AFTER Win 8? in Installation & Setup
I need my XP back for some older programs. I've read a lot about getting xp back to the boot menu when u install 8 after xp but not the other way around. My question... If I disconnect all drives then install xp to a fresh drive that's the only one in the system, can I reconnect all my other...
Installing on HP in Installation & Setup
Hi! I was interested in installing the consumer preview, but apparently I'm unable to because my hard drive already has four partitions/volumes (I don't know the difference, sue me): (C:) HP_Tools Recovery (D:) SYSTEM. What can I do in order to install Windows 8/dual boot with Windows 7?...
Eight Forums Android App Eight Forums IOS App Follow us on Facebook