Macrium Rescue and Partition Assistant Rescue 1 thmb drv

JustDave

Member
Member
Messages
10
Hello, I need some advice

Right now I have Macrium Reflect rescue on one thumb drive and AOMEI Partition Assistant Rescue on another. They both are Windows PE programs. Can anyone think of a way to have them both on one thumb drive. I suppose there would be a menu where I would select which I wanted to boot to.

JustDave
 

My Computer

System One

  • OS
    Windows 8.1
    Computer type
    Laptop
    System Manufacturer/Model
    Asus A55V
    CPU
    Intel
It seems reasonable.

Just try it & see if it works. :)

screenshot_15.jpg
 

My Computer

System One

  • OS
    Windows 8.1.1 Pro with Media Center
    Computer type
    PC/Desktop
    System Manufacturer/Model
    Gateway
    CPU
    AMD K140 Cores 2 Threads 2 Name AMD K140 Package Socket FT1 BGA Technology 40nm
    Motherboard
    Manufacturer Gateway Model SX2110G (P0)
    Memory
    Type DDR3 Size 8192 MBytes DRAM Frequency 532.3 MHz
    Graphics Card(s)
    ATI AMD Radeon HD 7310 Graphics
    Sound Card
    AMD High Definition Audio Device Realtek High Definition Audio USB Audio Device
    Monitor(s) Displays
    Name 1950W on AMD Radeon HD 7310 Graphics Current Resolution 1366x768 pixels Work Resolution 1366x76
    Screen Resolution
    Current Resolution 1366x768 pixels Work Resolution 1366x768 pixels
    Hard Drives
    AMD K140
    Cores 2
    Threads 2
    Name AMD K140
    Package Socket FT1 BGA
    Technology 40nm
    Specification AMD E1-1200 APU with Radeon HD Graphics
    Family F
    Extended Family 14
    Model 2
    Extended Model 2
    Stepping 0
    Revision ON-C0
    Instruction
    Browser
    Opera 24.0
    Antivirus
    Avast Internet Security
I thought it was reasonable, also...but I don't know how to accomplish this. I was hoping for some advice or be pointed in the right direction.
 

My Computer

System One

  • OS
    Windows 8.1
    Computer type
    Laptop
    System Manufacturer/Model
    Asus A55V
    CPU
    Intel

My Computer

System One

  • OS
    Windows 8.1 Pro with Media Center (64-bit)
    Computer type
    PC/Desktop
    System Manufacturer/Model
    Custom-build
    CPU
    Intel Core i7-2600K @ 4.3 GHz
    Motherboard
    ASUS P8P67 PRO Rev 3.0
    Memory
    16 GB G.SKILL Ripjaws X DDR3 SDRAM DDR3 1600 (4 banks 4GB DIMM DDR3 8-8-8-24 5-32-12-7 1T 1.5V)
    Graphics Card(s)
    NVIDIA GeForce GT 440
    Sound Card
    Firewire Focusrite Saffire Pro 14
    Monitor(s) Displays
    LG W2353V
    Screen Resolution
    1920x1080
    Hard Drives
    2 of Seagate Barracuda XT ST32000641AS (2TB ea.);
    1 of Seagate Barracuda Green ST2000DL003 (2TB);
    1 of Hitachi Deskstar HDS722020ALA330 (2TB);
    2 of Seagate Desktop ST4000DM000-1F2168 (4TB)
    PSU
    Corsair AX850 Gold
    Case
    Cooler Master HAF 932 Advanced
    Cooling
    ThermalTake Silent 1156
    Keyboard
    Logitech K520
    Mouse
    Logitech M310
    Internet Speed
    7Mbps
    Browser
    Chrome
    Antivirus
    Kaspersky
    Other Info
    Event Studio Precision 6 powered audio monitors;
    Boston Acoustics CS Sub 10 Powered Subwoofer;
    NI Kore controller;
    NI Maschine controller;
    M-Audio Axiom 61 keyboard controller; expression pedal; sustain pedal;

    ... and tons of audio software ...

    I also keep two USB 3 thumb drives (A: and B:) attached with boot recovery and security stuff that I can boot into from BIOS in case of emergency
I thought it was reasonable, also...but I don't know how to accomplish this. I was hoping for some advice or be pointed in the right direction.

Just put both on the same usb.

Unless Macrium decides to format the usb.

Then again once the Macrium files are added, try adding the other files.
The other program might decide to format too.

You might insert both usb drives & copy the files from one to the other.
That sounds best. :)
 

My Computer

System One

  • OS
    Windows 8.1.1 Pro with Media Center
    Computer type
    PC/Desktop
    System Manufacturer/Model
    Gateway
    CPU
    AMD K140 Cores 2 Threads 2 Name AMD K140 Package Socket FT1 BGA Technology 40nm
    Motherboard
    Manufacturer Gateway Model SX2110G (P0)
    Memory
    Type DDR3 Size 8192 MBytes DRAM Frequency 532.3 MHz
    Graphics Card(s)
    ATI AMD Radeon HD 7310 Graphics
    Sound Card
    AMD High Definition Audio Device Realtek High Definition Audio USB Audio Device
    Monitor(s) Displays
    Name 1950W on AMD Radeon HD 7310 Graphics Current Resolution 1366x768 pixels Work Resolution 1366x76
    Screen Resolution
    Current Resolution 1366x768 pixels Work Resolution 1366x768 pixels
    Hard Drives
    AMD K140
    Cores 2
    Threads 2
    Name AMD K140
    Package Socket FT1 BGA
    Technology 40nm
    Specification AMD E1-1200 APU with Radeon HD Graphics
    Family F
    Extended Family 14
    Model 2
    Extended Model 2
    Stepping 0
    Revision ON-C0
    Instruction
    Browser
    Opera 24.0
    Antivirus
    Avast Internet Security
https://www.dropbox.com/s/q8p4edh1p0jwooj/RE64v6.zip

Extract it somewhere sensible, then rt click and run as admin on the RE64v6-runmeasdmin.cmd.

It will make winpe for you and include both Aomei and macrium ( and windows recovery options ) in the same one.

It will offer to make an .iso file. You can do that if you like, then use Rufus to put on a thumb drive. Rufus - Create bootable USB drives the easy way

Or say No to make an .iso file and ( if you know how ) , you can just put the files from the "ISO" folder it creates onto your usb drive.
 

My Computer

System One

  • OS
    7/8/ubuntu/Linux Deepin
    Computer type
    PC/Desktop
SIW2,

Very interested in your solution. I unzipped RE64v6.zip to my desktop and ran it as administrator. Here is a screen shot of the results, any ideas?
 

Attachments

  • re64v6.jpg
    re64v6.jpg
    61.5 KB · Views: 80

My Computer

System One

  • OS
    Windows 8.1
    Computer type
    Laptop
    System Manufacturer/Model
    Asus A55V
    CPU
    Intel
There is an issue with win8 dism not being as clever as win7 dism.

New version:

https://www.dropbox.com/s/802hgbocdafdhd2/RE64v7.zip

Not clear to me what the problem is with yours, though. It appears to be finding the GUID but not the actual winre.wim file.

You can have a look at bcd output to see where it supposed to be and check.

Open an elevated command and type:

bcdedit /enum {yourguid}

Or you can have a look with :

Reagentc /info
 

My Computer

System One

  • OS
    7/8/ubuntu/Linux Deepin
    Computer type
    PC/Desktop
Back
Top