Hi there,
I have a fresh install of 8.1 PRO x64 on one of my machines and want to install and configure further via RDC, as I usually do from the comfort of my couch using a laptop running 7 x64 Enterprise.
So I'm connected and everything's up and running, yet cannot RDC from the 7 laptop into the 8.1 PRO machine. I have checked the "allow remote connections to this PC" in remote settings in PC Info. The PC is on the network because it can be discovered and shared folders can be seen. I can ping it too.
So I'm a bit out of ideas here as it is a completely fresh install with zero other software. RDC from the laptop onto other machines works perfectly. The only stubborn one is the machine running 8.1 PRO.
Thanks for your aid
I have a fresh install of 8.1 PRO x64 on one of my machines and want to install and configure further via RDC, as I usually do from the comfort of my couch using a laptop running 7 x64 Enterprise.
So I'm connected and everything's up and running, yet cannot RDC from the 7 laptop into the 8.1 PRO machine. I have checked the "allow remote connections to this PC" in remote settings in PC Info. The PC is on the network because it can be discovered and shared folders can be seen. I can ping it too.
So I'm a bit out of ideas here as it is a completely fresh install with zero other software. RDC from the laptop onto other machines works perfectly. The only stubborn one is the machine running 8.1 PRO.
Thanks for your aid
My Computer
System One
-
- OS
- 8.1
- Computer type
- PC/Desktop
- System Manufacturer/Model
- Acer Predator G7710 Crusader II
- CPU
- Xeon X5650
- Motherboard
- GA-X58A-UD7
- Memory
- 12GB Mushkin Radioactive 1600Mhz
- Graphics Card(s)
- R9 390
- Sound Card
- X-FI Fatal1ty Champion
- Hard Drives
- Kingston HyperX Predator 240GB
2x WD Velociraptor 300GB RAID
2x WD Blue 1TB, non-RAID
- PSU
- Acer 750W
- Case
- Acer Predator Orange
- Cooling
- Asetek LCS AIO
- Keyboard
- Corsair Strafe RGB
- Mouse
- Razer Diamondback 2016