Need help bridging Wireless router to another router.

SuperGamerDude

New Member
Messages
21
I have been working on this for hours. Any help is appreciated. So anyways, I am attempting to WIRELESSLYct my old belkin router with my cisco router upstairs. I cannot just connect an ethernet cable from my pc to the belkin upstairs, because its too long and my house is designed in a way its not possible. So, my goal is to be able to wirelessly connect the two router, so i can put an ethernet cable in my room from the second router to my pc without having a wire hanging through the house. I have matched the security SSID, passcode, security type, and changed the ip static address on the second router within range of the first, but not exact as the first. When i go into my second router, the belkin, I click on use as access point (to use the router only as an access point for my pc, to connect to the other router), and i entered the ip address for the router access point as 192.168.2.254. Is that supposed to match the ip address I inputed in the settings of the access point. Also, when I click enter after doing this, my second router crashes and I am forced to reboot and reset the router and start all over. I am not sure what I am doing wrong, but the model of the second router is Belkin F5D7230-4. Any help? If you need more info or I worded it in a weird way, tell me. Thanks!:geek:
 

My Computer

System One

  • OS
    Windows 8.1 (64-Bit) and Windows 7 (64-Bit) (Dual Boot)
    Computer type
    Laptop
    CPU
    AMD A6-4400M, 2 cores, 2.7 to 3.2 GHZ speed
    Memory
    8 GB DDR3 Memory
    Graphics Card(s)
    AMD Radeon HD 7520G
    Screen Resolution
    1366x768
You would need to run a Cat-5e run from the upstairs router, to the other router which has DHCP turned off. So that you can use the Wifi capable router as an Access Point. Of course with it being an older piece of hardware. You will end up having the issue of a device that may be on its last legs.

You really need an Access Point, or a router you can setup as an Access Point.
 

My Computer

System One

  • OS
    Linux Mint 17.2
    Computer type
    Laptop
    System Manufacturer/Model
    Toshiba Satellite C850D-st3nx1
    CPU
    AMD E1-1200 APU with Radeon (tm) HD Graphics 1.40 GHZ
    Memory
    12GB
    Graphics Card(s)
    AMD Radeon™ HD 7310 Graphics
    Sound Card
    Realtek HD
    Monitor(s) Displays
    LCD
    Screen Resolution
    1366 x 768
    Hard Drives
    Crucial M500 240GB SSD
    Mouse
    Logitech M525
    Internet Speed
    45/6 - ATT U-Verse
    Browser
    Google Chrome
    Antivirus
    None needed. It is Linux.
    Other Info
    Arris NVG589 Gateway; Router - Cisco RV320; Switch - Netgear GS108 8-Port Switch & Trendnet TEG-S50g 5-Port Switch; Access Points - Engenius ECB350, Trendnet TEW-638APB; NAS - Lenovo ix2-4; Printer - Brother HL-2280DW; Air Print Server - Lantronix XPrintServer

    A/V UPS - Tripp-Lite Smart 1500LCD 1500 Va/900 W.
Wait, so I cannot setup the belkin as an access point to communicate with the upstairs one wirelessly, becaus in the belkin options, it says you can use it as an access point.
 

My Computer

System One

  • OS
    Windows 8.1 (64-Bit) and Windows 7 (64-Bit) (Dual Boot)
    Computer type
    Laptop
    CPU
    AMD A6-4400M, 2 cores, 2.7 to 3.2 GHZ speed
    Memory
    8 GB DDR3 Memory
    Graphics Card(s)
    AMD Radeon HD 7520G
    Screen Resolution
    1366x768
An access point, requires a LAN connection to a router or switch connected to a router. You need a "Bridge" or "Repeater". If you want to not use a wired connection from the Wifi router to the other device.
 

My Computer

System One

  • OS
    Linux Mint 17.2
    Computer type
    Laptop
    System Manufacturer/Model
    Toshiba Satellite C850D-st3nx1
    CPU
    AMD E1-1200 APU with Radeon (tm) HD Graphics 1.40 GHZ
    Memory
    12GB
    Graphics Card(s)
    AMD Radeon™ HD 7310 Graphics
    Sound Card
    Realtek HD
    Monitor(s) Displays
    LCD
    Screen Resolution
    1366 x 768
    Hard Drives
    Crucial M500 240GB SSD
    Mouse
    Logitech M525
    Internet Speed
    45/6 - ATT U-Verse
    Browser
    Google Chrome
    Antivirus
    None needed. It is Linux.
    Other Info
    Arris NVG589 Gateway; Router - Cisco RV320; Switch - Netgear GS108 8-Port Switch & Trendnet TEG-S50g 5-Port Switch; Access Points - Engenius ECB350, Trendnet TEW-638APB; NAS - Lenovo ix2-4; Printer - Brother HL-2280DW; Air Print Server - Lantronix XPrintServer

    A/V UPS - Tripp-Lite Smart 1500LCD 1500 Va/900 W.
Back
Top