rautasiili
New Member
- Messages
- 2
Hello everybody,
I 'had' perfectly running system (Asus Z87-A, Samsung SAMSUNG 840 Pro Series *2, Seagate Brracuda 1TB 7200.11 series *2).
I've got perfectlöy running 8.1 x64 homr edition on Samsung SSD disks. I used to have Win7 32b version on HD-Disks, which I later used as storage disks. However I left Windwos7-directory intact in 1st HD-disk.
I experienced slight problems with Barracudas and found out there's a firmware update for my specific model.
When I unplugged SSDs, the old windows 7-installation attempted to repair my system, and since that I cannot use SSD and HD disks same time.
All disks are in ACHI mode.
If just the SSDs are connected everything works, however if I add any of the HDs, system whether fails to start or tries to start old windows 7.
Now in EZ setup SSD are P1-P2 and HDs P3-P4.
For some reason the system always boots the P3 even P1 is 1st in order "Windows boot manager"
I also checked BCD entries and they are correct.
Is is possible that when I disconnected SSDs, windows / wrote the MBR on HD (P3) and now tries somehow to boot there everytime i try?
I've got recovery disk, but automatic startup repair failed. I can access diskpart through cmd prompt.
Help appreciated!
I 'had' perfectly running system (Asus Z87-A, Samsung SAMSUNG 840 Pro Series *2, Seagate Brracuda 1TB 7200.11 series *2).
I've got perfectlöy running 8.1 x64 homr edition on Samsung SSD disks. I used to have Win7 32b version on HD-Disks, which I later used as storage disks. However I left Windwos7-directory intact in 1st HD-disk.
I experienced slight problems with Barracudas and found out there's a firmware update for my specific model.
When I unplugged SSDs, the old windows 7-installation attempted to repair my system, and since that I cannot use SSD and HD disks same time.
All disks are in ACHI mode.
If just the SSDs are connected everything works, however if I add any of the HDs, system whether fails to start or tries to start old windows 7.
Now in EZ setup SSD are P1-P2 and HDs P3-P4.
For some reason the system always boots the P3 even P1 is 1st in order "Windows boot manager"
I also checked BCD entries and they are correct.
Is is possible that when I disconnected SSDs, windows / wrote the MBR on HD (P3) and now tries somehow to boot there everytime i try?
I've got recovery disk, but automatic startup repair failed. I can access diskpart through cmd prompt.
Help appreciated!
My Computer
System One
-
- OS
- Windows 8.1 Home