Are SATA issues like Vista?? Can't operate in full SATA mode

cognus

New Member
Member
Messages
128
Location
Texas
this is an ASUS X83V notebook - Setting the SATA operation to 'compatible' mode at installation, Win8 CP installed fine, no hitches. Switched BIOS to Enhanced/full mode and it fails.

I recall this sort of problem from XP installs where tricks were needed to support SATA, but I do not recall this on Seven. Will Win 8 not detect the right controller, fetch the right driver? Do I need to manually force-install, reboot, reselect enhanced mode, and go from there?

thankx
c
 

My Computer

System One

  • OS
    Win 8.1, Win 10P, Win7-all, RIP XPP, 'droid 2.2, 2.3,4.x, 5..IOS,
    Computer type
    PC/Desktop
    System Manufacturer/Model
    many: E5440, 430 G1, E45, G4-1117DX, X120E, DC7600, X83VB-X2, NC10, Droids, Galaxy,
    CPU
    too many
    Motherboard
    ditto
    Memory
    ditto
    Graphics Card(s)
    ditto
    Internet Speed
    30mbps
Is this so-called "enhanced" mode switching the storage over to AHCI mode? If so, you have to edit the registry first before being able to do that.
 

My Computer

System One

  • OS
    8250 x86 + 7 SP1 x86 + Ubuntu 12.04 LTS x86
    CPU
    P4 3.4 GHz HT
    Motherboard
    MSI-7211
    Memory
    OCZ 2 GB DDR @ 400 MHz
    Graphics Card(s)
    HIS AGP HD 3850 Turbo Ice-Q
    Sound Card
    MOTU Traveler firewire interface
    Monitor(s) Displays
    Acer x223w
    Screen Resolution
    1680x1050
    Hard Drives
    WD Caviar Black 1 TB Sata II, WD 400 GB Sata I, WD 120 GB Sata I
    PSU
    300W generic
    Case
    Cybertron
    Keyboard
    Logitech Classic Keyboard 200, Dell RT7D20
    Mouse
    Logitech M510
    Internet Speed
    2 MByte/sec Down, 250 KByte/sec Up
why?
Is this so-called "enhanced" mode switching the storage over to AHCI mode? If so, you have to edit the registry first before being able to do that.
 

My Computer

System One

  • OS
    Win 8.1, Win 10P, Win7-all, RIP XPP, 'droid 2.2, 2.3,4.x, 5..IOS,
    Computer type
    PC/Desktop
    System Manufacturer/Model
    many: E5440, 430 G1, E45, G4-1117DX, X120E, DC7600, X83VB-X2, NC10, Droids, Galaxy,
    CPU
    too many
    Motherboard
    ditto
    Memory
    ditto
    Graphics Card(s)
    ditto
    Internet Speed
    30mbps
why?
Is this so-called "enhanced" mode switching the storage over to AHCI mode? If so, you have to edit the registry first before being able to do that.

Because you are literally changing your hardware by doing that.

Without editing the registry, the blue screen stop error is telling you that it can't handle the hardware change because it is using the wrong driver.

Microsoft.com is a learning library: Error message when you start a Windows 7 or Windows Vista-based computer after you change the SATA mode of the boot drive: "STOP 0x0000007B INACCESSABLE_BOOT_DEVICE"

Don't use the auto fix-it. It won't work.
 

My Computer

System One

  • OS
    8250 x86 + 7 SP1 x86 + Ubuntu 12.04 LTS x86
    CPU
    P4 3.4 GHz HT
    Motherboard
    MSI-7211
    Memory
    OCZ 2 GB DDR @ 400 MHz
    Graphics Card(s)
    HIS AGP HD 3850 Turbo Ice-Q
    Sound Card
    MOTU Traveler firewire interface
    Monitor(s) Displays
    Acer x223w
    Screen Resolution
    1680x1050
    Hard Drives
    WD Caviar Black 1 TB Sata II, WD 400 GB Sata I, WD 120 GB Sata I
    PSU
    300W generic
    Case
    Cybertron
    Keyboard
    Logitech Classic Keyboard 200, Dell RT7D20
    Mouse
    Logitech M510
    Internet Speed
    2 MByte/sec Down, 250 KByte/sec Up
Back
Top