Windows 8 and 8.1 Forums


AHCI boot problems - constand reboot-repair - W8.1

  1. #21


    Posts : 1,121
    Windows 8.1 x64


    The thread below was marked as solved. Check the last post (as of now) to see if you can make sense of it... I do not know what the OP means as RAM bus configuration.

    How do i change IDE to AHCI controller after install Windows 8.1 - Microsoft Community

      My System SpecsSystem Spec

  2. #22


    Posts : 13
    Win 8.1


    Thanks for finding that. I HAVE had issues with W7 and W8 sometimes (both on AMD and Intel) machines in the past when installing/configuring initial systems with a lot of memory (over 4GB).

    I don't know if that is/was the fix (removing some memory to get it to work, and then upgrading the memory afterward) but it's worth looking into. I also posted on that thread to see if maybe that person could expand on the changes he made. We'll see if he returns.

    Again - thanks for catching all these opportunities - maybe we'll catch the solution yet.

    I've been doing a bunch of install/bench testing of boards/hds and drivers - learning a little and maybe there is light at the end of a very long tunnel.
      My System SpecsSystem Spec

Page 3 of 3 FirstFirst 123
AHCI boot problems - constand reboot-repair - W8.1
Related Threads
The OS is installed while the mode was set for IDE, and afterward it was changed to AHCI. Now, the system does not boot. "Attempting repair" is displayed and the process does not advance. W8 is installed on a ssd and a hdd, and both exhibit the same symptom. The system includes GA-970A-UD3,...
Hello. Yesterday night when i came home from work, i turn on my laptop with windows 8.1 and its started loading "pc repair", after it finished i get a message saying it could not repair automaticly. So i have tried advanced-restore point, it just failed. Tried cmd- sfc /scannow, and i get a...
I have a SSD and tried to switch to AHCI without having to reinstall. A guide suggested i had to do to device managers and then select my IDE items, select manually install driver and install the driver for AHCI Well now i can't boot windows 8 anymore. I get an error message before the loading...
I don't have a SSD, but I do have a external HDD via Esata, Do I need to switch from RAID to AHCI?
I hope someone here has a solution to my problem. I did a clean install of Win 8 Pro 64bit to a computer with an AMD780G chipset. Everything went smoothly until I tried to update to the AMD SB AHCI driver. The AMD driver seemed to install without error but on the reboot there was a BSOD. ...
computer won't boot in AHCI mode ? in Drivers & Hardware
I installed windows 8 in ide mode in the bios. Now , if I set that to AHCI mode in the bios then the pc won't boot and repair cd cannot do make the pc bootable. How can I fix this ? Is there a performance difference between ide and ahci mode ? I use segate ST2000DM001 as boot drive and have...
I signed up here because I've spent the past 28 out of the past 36 hours trying to solve this issue. Background: I upgraded from Vista to 8 and found out the hard way that installed programs do not migrate, so I gave my g/f an option. I could either downgrade and do Vista > 7 > 8 or she could...
Eight Forums Android App Eight Forums IOS App Follow us on Facebook