Windows 8 and 8.1 Forums


Lenovo Partition sytem destroyed!

  1. #1


    Posts : 2
    Windows 8

    Lenovo Partition sytem destroyed!


    hello guys,
    I'm having a problem with my PC

    IdeaCentre K430 LENOVO
    OS:Windows 8 x64 bit

    I was trying to restore and start over again ,using the Lenovo recovery but when my PC restart
    I recieve this two errors , with a skyblue background says: "Lenovo System Partition was destroyed!"
    and when I click OK there's another one popup says: "X:\onekey\main\lrscall.vbs" then I click OK again , the pc restart and again I recieved the errors it keeps doing it over and over again.. But I can access the BIOS pressing F1 and I just also recieved the 6 CD's of LENOVO Recovery Disc that I order to recover this error as they said.

    I follow the guide that the user gave me in the lenovo forum he says :
    =========================================
    You will need to Boot into BIOS
    TAP F1 Once you have the Lenovo Screen when powered on.
    Some options may not be available in your BIOS version but set the things you were able to find.

    Check Exit TAB first
    OS Optimization
    OS Optimized
    For the two options above: Should be set as Disabled or Other OS

    Under Boot Tab / Start up Tab
    Boot Mode Should be set to Legacy
    Boot Priority Should be set to Legacy First
    UEFI Boot should be set to Disabled
    Quick Boot should be Disabled
    StartUp device Menu prompt should be Disabled2
    Quick Boot Should be Disabled
    USB Boot should be Enabled
    Secure boot Should be Disabled

    Once all are set press F10 to save and exit

    Once the Lenovo LOGO shows, start tapping F12 in your keyboard and a list of Disk drive will show as your boot option, CD/DVD should be there to boot from.



    ==================================
    and I follow all of that

    This is my BIOS TABS

    Main Devices Advance Power Security StartUp Exit

    Starting on Devices :

    USB SetUp = Enabled
    ATA Drives SetUp (There's 4 options)
    ->IDE
    ->AHCI
    ->RAID
    ->Disabled

    I Set to AHCI
    Video SetUp = Auto (There's no Disabled option)
    Network SetUp = Disabled



    Security TAB

    Secure Boot = Disabled



    StartUP TAB

    > Primary Boot Sequence
    ( I don't know about this. It's talking about Include and Exclude)


    CSM = Enabled
    Boot Mode = Auto (There's 3 option in bootmode AUTO , UEFI and LEGACY ONLY If I choose Legacy Only Boot Priotiy will be gone.I already test UEFI and LEGACY.)
    Boot Priority = Legacy First (I already did the UEFI)
    Quick Boot = Disabled
    Boot Num-Lock Status = On
    Keyboardless Operation = Enabled
    Rapid Boot = Disable

    Exit TAB

    Save Changes and Exit
    Discard Change and Exit

    Load Optimal Defaults
    OS Optimized Default = Disabled

    when I press F10 to save changes and restart and when lenovo logo
    show up I really press F12 repeatedly!
    nothing happens?
    I can't access to boot manager where I can choose what to boot.
    but I can access boot manager If I disable
    ATA Drives SetUp.
    But I only see Enter Setup and nothing else.



    and Still the error show up
    "Lenovo system partition was destroyed!"

    and I try it again.
    by pressing F12
    nothing happens.
    and again and again..

    what's the problem??
    I've search in the entire google
    they got thesame problem with me.

    please heeeeeeeeeeeelppppp!
    Last edited by zeoknight; 21 Dec 2013 at 05:47.

      My System SpecsSystem Spec

  2. #2


    Posts : 5,592
    ME, XP,Vista,Win7,Win8,Win8.1


    I just also recieved the 6 CD's of LENOVO Recovery Disc that I order to recover this error as they said.
    Using LENOVO Recovery disks.

    Quote Originally Posted by LENOVO
    Before the Recovery Process


    If you are using this recovery disc set to convert your operating system from the Windows 7 operating system to the Windows 8 operating system, or to restore the contents of your hard disk drive to a factory-installed Windows 8 installation (including the Windows 8 operating system, applications, and drivers), you need to perform the following procedure before you start the recovery process.

    Before you start the recovery process, do the following:
    1.Repeatedly press and release the F1 key when turning on the computer. When you hear multiple beeps or see a logo screen, release the F1 key. The Setup Utility program opens.
    2.From the Setup Utility Program main menu, select Exit or Restart, and make sure OS Optimized Defaults is set to Disabled.
    3.Do one of the following:
    ◾If you are using a ThinkPad or Lenovo V, B, K or E series notebook computer, press F9, select Yes in the displayed window to confirm your selection, and then press Enter. Continue with step 4.
    ◾ If you are using a ThinkCentre, ThinkStation or Lenovo 62 computer, continue with Step 4.

    4. Press F10 to save your changes and exit the Setup Utility program.
    5.Continue with Performing the recovery process for Windows 8 below.


    Performing the recovery process for Windows 8


    Notes:
    •You must have an internal or external DVD drive to use the recovery discs.
    •During the recovery process, all data on the hard disk drive will be deleted. Copy any important data or personal files that you want to keep onto removable media or a network drive before you start the recovery process.

    To restore your computer to the original factory configuration using the recovery disc set, do the following:
    1.Make the CD/DVD drive the first startup device in the startup sequence using the following procedure: ◾Repeatedly press and release the F1 key when turning on the computer. When you hear multiple beeps or see a logo screen, release the F1 key. The Setup Utility program opens.
    ◾Use the arrow keys to select Startup. Depending on your computer model, select Primary Boot Sequence, Boot, or Startup Sequence.
    ◾Select the CD/DVD drive as the first boot device by following the instructions and the help messages on the screen.

    2.Insert the Applications and Drivers Recovery Disc labeled Disc 1 into the DVD drive.
    3.Press F10 to save the Setup Utility configuration changes. The computer restarts and the recovery program opens. Follow the instructions on the screen to begin the recovery process.
    4.Select your language and click Next.
    5.Read the license. If you agree to the terms and conditions, select I agree to these terms and conditions and then click Next.
    6.Read the messages on the screen and then select GPT partition style or MBR partition style as you desire. Click Next. ◾Note: It is recommended that you select GPT partition style is selected by default. Select MBR partition style only when you intend to use image-cloning tools or third party disk-management tools that require an MBR partition for compatibility purposes.

    7.If your computer has multiple internal hard disk drives installed, a window is displayed, asking if you would like to format all the internal hard disk drives. Select one of the following as you desire:
    ◾Click Yes if you want to delete all data on the hard disk drives.
    ◾Click No if you want to format the system drive only.

    8.Click Yes or Next in the displayed window to continue the recovery process.
    9.Insert the Operating System Recovery Disc when prompted and then click Yes or OK to continue the recovery process.
    10.If you have a secondary Operating System Recovery Disc, insert it into the DVD drive when prompted and then click Yes or OK to continue the recovery process.
    11.Reinsert the Applications and Drivers Recovery Disc labeled Disc 1 when prompted and then click Yes or OK to continue the recovery process.
    12.If you have a secondary Applications and Drivers Recovery Disc, insert it into the DVD drive when prompted and then click Yes or OK to continue the recovery process.
    13.If you have a Supplemental Recovery Disc, insert it when prompted and click Yes. If you do not have a Supplemental Recovery Disc, click No. ◾Note: Not all recovery disc sets come with a Supplemental Recovery Disc.

    14.When all of the data has been copied from the last disc in the set and processed, you will be prompted to restart the computer. Click Yes to restart the computer. ◾Note: The rest of the recovery process is fully automated and no action is required by you. The computer will restart into the Microsoft Windows desktop several times and you might experience periods when no activity is apparent on the screen for several minutes at a time. This is normal.

    15.When the recovery process is complete, the Set Up Windows screen is displayed. Follow the instructions on the screen to complete the Windows setup.
    16.Restart your computer, and repeatedly press and release F1 key to enter the Setup Utility program. From the Setup Utility program main menu, select Exit or Restart, and then do one of the following:
    ◾If you installed any version of the Windows 8 (32–bit) operating system in MBRmode, select OS Optimized Defaults > Disabled.
    ◾ If you installed any version of the Windows 8 (64–bit) operating system in GPT mode, select OS Optimized Defaults > Enabled.
    •Note: If you are using a ThinkPad or Lenovo V, B, K or E series notebook computer, after you set OS Optimized Defaults to Enabled, press F9, select Yes in the displayed window to confirm your selection, and then press Enter.

    ◾ If you installed any version of the Windows 8 (64–bit) operating system in MBR mode, select OS Optimized Defaults > Disabled.
    Important: ◦If you do not perform this step after installing any version of the Windows 8 (64-bit) operating system in GPT mode, the operating system will run on your computer, but the following features that rely on a native UEFI-mode boot will not work: ◾Secure boot
    ◾Seamless boot experience
    ◾Network unlock for BitLocker - This feature is available on computers that have a Trusted Platform Module (TPM).
    ◾Encrypted Hard Drive (eDrive) support

    ◦For additional information about these features, go to Microsoft Corporation.

    17.If you want to restore the original startup sequence, select Startup, and then select Primary Boot Sequence, Boot, or Startup Sequence, depending on your computer model.
    18.Press F10 to save the changes and exit the Setup Utility program.

    Note:
    •After restoring a hard disk drive to the factory default settings, you might need to reinstall some device drivers.
    •If your computer is preinstalled with Windows 7 Professional software and also comes with a license and media for Windows 8 Pro software, you may only use one version of the Windows software at a time. Switching between versions will require you to uninstall one version and install the other version.
      My System SpecsSystem Spec

  3. #3


    Posts : 2
    Windows 8


    I was able to startup the recovery disc
    But Once the installation began
    there's an error.
    saying: "Recovery fail"
    and I see at the installation details
    "No PBR driver found!"
    so what now? what's the problems with this?
      My System SpecsSystem Spec

  4. #4


    Posts : 203
    Windows 8.1 Pro


    Try loading BIOS Optimized Defaults, Save and Exit.

    Then try loading the recovery again and following the instructions carefully ( the above instructions look very helpful too).

    Personally, I've never had a problem trying to recover my laptop with Lenovo's recovery disc's on both zero wiped (deleted recover partition) and new hard drive's, the default recovery process simply creates the recovery partition again on blank hard drives.

    Good luck,
      My System SpecsSystem Spec

  5. #5


    Posts : 5,592
    ME, XP,Vista,Win7,Win8,Win8.1


    Did you undo all the incorrect UEFI/BIOS firmware setting you made?
    in post one.
      My System SpecsSystem Spec

Lenovo Partition sytem destroyed!
Related Threads
Solved Windows 8 sytem freeze after left idle in BSOD Crashes and Debugging
Hi, I'm having a freezing issue on a recently built PC. It seems to occur when left idle for awhile. I've noticed it seems to happen when left on for about a day. I get no warnings, my mouse, keyboard and intuos tablet stop working and my computer just freezes. I have to hardboot to get it back up....
Hello everyone, I am having BSOD issues... used to have them some months ago, then none... a couple days ago they started again, today, got 3 already. Working not really possible. I didn't write them down quickly enough, but one was NTFS, one was system thread exception. I have not...
Hi I bought a brandnew Buffalo 3TB external HDD Drive station (USB 3.0) (HD-LB3.0TU3-EU) and wanted to make a second backup of my files which are on another Western Digital 3TB USB 3.0 external harddrive. So i plugged both in and both were recognized without problem. Then i began to copy the...
I installed the update for 8.1 (X64) but after the update i could not acces my diskstation. Pinging went fine. accessing trough the webpage went fine. but trying to access it with the explorer did not work. Not even when i tried it with the IP adress. After a system restore (before the...
Sytem Image in Performance & Maintenance
I have a question for those who have upgraded to 8.1. Does 8.1 have an option to create a system image??
Solved Sytem Restore Point in Performance & Maintenance
How do you make Windows 8 make Restore points on every system change without manually doing it yourself? Like drivers, programs, etc.
Service partition destroyed msg? in Performance & Maintenance
Hi all I need some help here I tried to do a recovery with Windows 8 but now I have an error message when I start up my computer it says Lenovo Service partition has been destroyed when I click on the okay button after that it tells me it cannot find script file X:\onekey\main\lrscall.vbs After...
Eight Forums Android App Eight Forums IOS App Follow us on Facebook