Windows 8 pro, UFEI bios, cloning disk

Hi,

I am running windows 8 pro in a Intel i5 3470 + Gigabyte B75M-D3H system with UEFI bios .

I have two drives OS drive is a SSD & a 1 tb HDD with two partitions.

I am removing the SSD & want to transfer OS to one of the partitions on the HDD , the issue is boot files on the small 350mb system reserved partition on the OS drive , not sure how to transfer this partition or if this partion in on the SSD or the HDD.

This what my drives look like , C: is SSD :





Before i installed the SSD , I was running win 7 from the HDD installed in the 170 gb partition , to install the SSD i had to remove the HDD then do a fresh install of win 8 on the SSD & connected the HDD back later ,

the 170gb HDD partition is still untouched & has the old OS files , I want to transfer the SSD partition back to this 170gb partition i.e drive F: in the above pic . I am not sure how to transfer it & what to do with the system reserved partition .

Please help.

I personally would keep the OS on the SSD.

Did install Windows 8 in uEFI mode?
http://www.eightforums.com/tutorial...e-firmware-interface-install-windows-8-a.html

I am installing the SSD in another PC, it is overkill for this pc , this pc will only have the 1tb HDD , OS was installed from a pendrive but dont remember if it was uefi mode .

Edit: I dont have Recovery & MSR partitions like your link so probably it was not installed in UEFI mode.