CovertDeath
New Member
- Messages
- 42
hello friends... okay, interesting problem this time around. I just swapped my computer to a new case and in the process was going to simply re-install everything and start from scratch...
so i did the following, cleared CMOS to reset bios and booted into UEFI. changed the sata mode to RAID so I can pair my two 500gb drives in raid 0. did that and then booted back into UEFI to set the boot order (dvd / ssd / raid drive)
well for some reason the description for my drives have changed and for the life of me i can't get them back.
they USED to say (when everything was working)
1. UEFI dvd-rom
2. UEFI - ssd
3. SATA dvd-rom
4. SATA - ssd
5. RAID - Maindrive
but NOW everything reads as raid even before i have paired anything in raid... they all ready
1. RAID: SSD
2. RAID: dvd-rom
3. RAID: 500gb-1
4. RAID: 500gb-2
and nothing is working now.. i've cleared cmos 100 times now to try to get it to work but everytime i change sata mode to RAID the above happens.... it used to work fine, i don't get what happened to my stuff but its piddling me off because even win8 install is BSODing after 2 seconds of starting the install on the SSD
any help much appreciated!
so i did the following, cleared CMOS to reset bios and booted into UEFI. changed the sata mode to RAID so I can pair my two 500gb drives in raid 0. did that and then booted back into UEFI to set the boot order (dvd / ssd / raid drive)
well for some reason the description for my drives have changed and for the life of me i can't get them back.
they USED to say (when everything was working)
1. UEFI dvd-rom
2. UEFI - ssd
3. SATA dvd-rom
4. SATA - ssd
5. RAID - Maindrive
but NOW everything reads as raid even before i have paired anything in raid... they all ready
1. RAID: SSD
2. RAID: dvd-rom
3. RAID: 500gb-1
4. RAID: 500gb-2
and nothing is working now.. i've cleared cmos 100 times now to try to get it to work but everytime i change sata mode to RAID the above happens.... it used to work fine, i don't get what happened to my stuff but its piddling me off because even win8 install is BSODing after 2 seconds of starting the install on the SSD
any help much appreciated!
My Computer
System One
-
- OS
- Windows 8 Pro x64
- System Manufacturer/Model
- CovertDeath
- CPU
- AMD FX-8350 @ 4.5Ghz
- Motherboard
- AsRock 990FX Extreme 4
- Memory
- G-skill 4Gb @ 1600 DDR3 x 2 (8Gb @ 1600)
- Graphics Card(s)
- EVGA GTX 670
- Sound Card
- Creative
- Monitor(s) Displays
- ASUS 24 LED
- Screen Resolution
- 1920x1080
- Hard Drives
- WD 500Gb
64Gb SSD Sata3
- PSU
- TX750W Corsair 80 Silver plus certified
- Case
- AzzA
- Cooling
- Corsair H60 Liquid Cooling
- Keyboard
- Logitech G110
- Mouse
- Logitech MX518
- Internet Speed
- 15/2.5