thedumbasd
New Member
- Messages
- 30
Hi. I don't know what to do, already asked for help on bunch of forums, but nobody was able to help. I cleaned my hard drive in command prompt and now I'm stuck in bios. Can't do anything, not even boot my windows DVD, so I can install a new one.
Aptio Setup Utility - Copyright ( C ) 2012 American Megatrends, Inc.
Main
BIOS Information
BIOS Vendor: American Megatrends
Version: 225
GOP Version: 3.0.14.2015
EC Version: 225
Processor Information: Intel ( R ) Core ( TM ) i7-360QM CPU @ 2.40 GHz
Memory Information
Total Memory: 8192 MB ( DDR3 )
System Information
Serial Number: CCN0CJ492339503
System Date
System Time
Access Level: Administrator
Advanced
Start Easy Flash
Internal Pointing Device: [ Enabled ]
Wake on Lid Open: [ Enabled ]
Power Off Energy Saving: [ Enabled ]
Intel Virtualization Technology: [ Enabled ]
Intel AES-NI: [ Enabled ]
VT-d: [Enabled]
> SATA Configuration
> Graphics Configuration
> Intel ( R ) Anti-Theft Technology Configuration
> USB Configuration
> Network Stack
Boot
Boot Configuration
Fast Boot: [ Disabled ]
Launch CSM: [ Enabled ]
Launch PXE OpROM: [ Enabled ]
Boot Option Priorities
Boot Option #1: P2: Slimtype DVD A DS8A9SH
Boot Option #2: P0: ST000LM024 HN-M101MBB
Boot Option #3: UEFI: IP4 Realtek Ethernet Controller
Boot Option #4: UEFI: IP6 Realtek Ethernet Controller
Boot Option #5: Realtek PXE B02 D00
Hard Drive BBS Priorities
CD/DVD ROM Drive BBS Priorities
Network Device BBS Priorities
Delete Boot Option
Security
If ONLY the Administrator's password is set, this only access to Setup and is only asked for when entering Setup.
If ONLY the User's password is set, this is a power on password and must be entered to boot to enter Setup.
In Setup the User will have Administrator rights.
Administrator Password Status: NOT INSTALLED
user password Status: NOT INSTALLED
Administrator Password
User Password
HDD User Password Status: NOT INSTALLED
Set Master Password
Set User Password
> I/O Interface Security
System Mode state: User
Secure Boot state: Disabled
Secure Boot Control: [ Disable ]
Save & Exit
Save Changes and Exit
Discard Changes and Exit
Save Options
Save Changes
Discard Changes
Restore Defaults
Boot override
UEFI: IP6 Realtek Ethernet Controller
UEFI: IP4 Realtek Ethernet Controller
P0: ST1000LM024 HN-M101MBB
P2: Slimtype DVD A DS8A9SH
Realtek PXE B02 D00
Launch EFT Shell from filesystem device
Aptio Setup Utility - Copyright ( C ) 2012 American Megatrends, Inc.
Main
BIOS Information
BIOS Vendor: American Megatrends
Version: 225
GOP Version: 3.0.14.2015
EC Version: 225
Processor Information: Intel ( R ) Core ( TM ) i7-360QM CPU @ 2.40 GHz
Memory Information
Total Memory: 8192 MB ( DDR3 )
System Information
Serial Number: CCN0CJ492339503
System Date
System Time
Access Level: Administrator
Advanced
Start Easy Flash
Internal Pointing Device: [ Enabled ]
Wake on Lid Open: [ Enabled ]
Power Off Energy Saving: [ Enabled ]
Intel Virtualization Technology: [ Enabled ]
Intel AES-NI: [ Enabled ]
VT-d: [Enabled]
> SATA Configuration
> Graphics Configuration
> Intel ( R ) Anti-Theft Technology Configuration
> USB Configuration
> Network Stack
Boot
Boot Configuration
Fast Boot: [ Disabled ]
Launch CSM: [ Enabled ]
Launch PXE OpROM: [ Enabled ]
Boot Option Priorities
Boot Option #1: P2: Slimtype DVD A DS8A9SH
Boot Option #2: P0: ST000LM024 HN-M101MBB
Boot Option #3: UEFI: IP4 Realtek Ethernet Controller
Boot Option #4: UEFI: IP6 Realtek Ethernet Controller
Boot Option #5: Realtek PXE B02 D00
Hard Drive BBS Priorities
CD/DVD ROM Drive BBS Priorities
Network Device BBS Priorities
Delete Boot Option
Security
If ONLY the Administrator's password is set, this only access to Setup and is only asked for when entering Setup.
If ONLY the User's password is set, this is a power on password and must be entered to boot to enter Setup.
In Setup the User will have Administrator rights.
Administrator Password Status: NOT INSTALLED
user password Status: NOT INSTALLED
Administrator Password
User Password
HDD User Password Status: NOT INSTALLED
Set Master Password
Set User Password
> I/O Interface Security
System Mode state: User
Secure Boot state: Disabled
Secure Boot Control: [ Disable ]
Save & Exit
Save Changes and Exit
Discard Changes and Exit
Save Options
Save Changes
Discard Changes
Restore Defaults
Boot override
UEFI: IP6 Realtek Ethernet Controller
UEFI: IP4 Realtek Ethernet Controller
P0: ST1000LM024 HN-M101MBB
P2: Slimtype DVD A DS8A9SH
Realtek PXE B02 D00
Launch EFT Shell from filesystem device
Last edited:
My Computer
System One
-
- OS
- Windows 8.1