Thanks in advance for help.
I originally built my computer with two 1 TB hdd as RAID1 with Windows 8 Pro 64 Bit as the OS.
The boot files eventually became corrupted. I could not reinstall Windows 8 on the RAID 1 array. So I then purchased two 2 TB HDD and created a new RAID 1 array which Windows 8 readily loaded onto.
I then added the two original 1 TB HDD to the computed to use for photography and media storage. They also showed when booting my computer as a separate RAID 1 array, but were listed as "repair." I went into the RAID BIOS and separated the array. I connected only one of the 1 TB HDD, and the drive was the "E" Drive in my computer, but I was unable to access it. "E\: is not accessible. Access is denied." Disk Management showed the drive as DISK 1, but as two partitions: System Reserved 350 MB NTFS Healthy (Active, Primary Partition) and 931.17 GB NTFS Healthy (Primary Partition). I used Diskpart to create a Primary partition and format the disk. That HDD now works fine. Unfortunately I did not backup the data on that HDD, which I would like to have.
I did try the second mirrowed 1 TB HDD on the computer before formatting the first and was able to access all of the data on the HDD.
Now after formatting the first 1 TB HDD, I added the second 1 TB HDD from the original RAID 1 array back onto the computer, wanting to retrieve the data on it. This HDD does not show on My computer and is not assigned a drive letter. However the HDD is listed in Disk Management as DISK 2 and partitioned into System Reserved 350 MB NTFS Healthy ( active, Primary Partition) and 931.17 GB NTFS Healthy (Primary Partition). Can you assist me in retrieving the data on this disk, copying it to another HDD, and then creating one partition on this HDD? I do not know how to assign the HDD a drive letter. I would like to format this HDD after copying the data, and have my computer assign it a drive letter so that I can use it.
Thanks in advance.
I originally built my computer with two 1 TB hdd as RAID1 with Windows 8 Pro 64 Bit as the OS.
The boot files eventually became corrupted. I could not reinstall Windows 8 on the RAID 1 array. So I then purchased two 2 TB HDD and created a new RAID 1 array which Windows 8 readily loaded onto.
I then added the two original 1 TB HDD to the computed to use for photography and media storage. They also showed when booting my computer as a separate RAID 1 array, but were listed as "repair." I went into the RAID BIOS and separated the array. I connected only one of the 1 TB HDD, and the drive was the "E" Drive in my computer, but I was unable to access it. "E\: is not accessible. Access is denied." Disk Management showed the drive as DISK 1, but as two partitions: System Reserved 350 MB NTFS Healthy (Active, Primary Partition) and 931.17 GB NTFS Healthy (Primary Partition). I used Diskpart to create a Primary partition and format the disk. That HDD now works fine. Unfortunately I did not backup the data on that HDD, which I would like to have.
I did try the second mirrowed 1 TB HDD on the computer before formatting the first and was able to access all of the data on the HDD.
Now after formatting the first 1 TB HDD, I added the second 1 TB HDD from the original RAID 1 array back onto the computer, wanting to retrieve the data on it. This HDD does not show on My computer and is not assigned a drive letter. However the HDD is listed in Disk Management as DISK 2 and partitioned into System Reserved 350 MB NTFS Healthy ( active, Primary Partition) and 931.17 GB NTFS Healthy (Primary Partition). Can you assist me in retrieving the data on this disk, copying it to another HDD, and then creating one partition on this HDD? I do not know how to assign the HDD a drive letter. I would like to format this HDD after copying the data, and have my computer assign it a drive letter so that I can use it.
Thanks in advance.
My Computer
System One
-
- OS
- Windows 8 pro 64 bit