Windows 8 and 8.1 Forums


Touchscreen on JooJoo Tablet is upside down!

  1. #1


    Posts : 2
    Windows 8 x86 on JooJoo Tablet

    Touchscreen on JooJoo Tablet is upside down!


    Hello everyone !

    i've been looking all over for a solution, but i can't seem to find anything..

    There used to be a JooJoo forum, with quite a lot of information on how to get everything to work, but they suffered a major database problem, causing them to lose all of their threads..
    So yeah, i'm basically on my own to try & figure this out..

    I got all the devices properly installed & touch worked out of the box, no optional drivers needed.. however, the touch screen is upside down..
    here's what i tried so far:

    win8 calibration : the normal way
    win8 calibration : upside down (i thought it could've helped since it reads everything upside down)

    eGalax touch driver: this made the touchscreen be recognized as a mouse, which works great, but the touch features aren't supported..

    changing the screen orientation has no effect, as the touch input rotates with the screen.. i tried this through "display resolution" & the nvidia control panel, but they had no effect at all..


    can anyone help me with this problem ?


    thanks in advance !

      My System SpecsSystem Spec

  2. #2


    Posts : 2
    Windows 8 x86 on JooJoo Tablet


    uhm hello ?

    i mean, if nobody is going to answer it here, where should i ask my question ?
      My System SpecsSystem Spec

  3. #3


    Posts : 1
    Windows 8 Pro


    Quote Originally Posted by Karoolus View Post
    uhm hello ?

    i mean, if nobody is going to answer it here, where should i ask my question ?
    Sorry to revive an old thread, specially one that no one even commented back on, but I was wondering if you or anyone on here happened to find a fix for this?

    I was recently given a JooJoo and installed a 128gb ssd with 4gb memory and Windows 8 Pro. Would really like to get this working. I have tried the eGalax drivers but all they do is make the touch screen act as a mouse which makes the touch gestures impossible.

    Thanks!
      My System SpecsSystem Spec

  4. #4


    Posts : 21
    joojoo running windows 8 pro with multitouch.

    multi touch in windows 8


    hope i can help guys,i was an active member on the joojoo forum and i managed to back up all the relevant drivers utilities and best of all i remember how to use them.for the full multitouch to work in windows 8 or any windows os the firmware has to be flashed with a simple file from joojoo os to windows os,i have these files.dont install any egalax stuff and callibrate the touchscreen via the tablet pc settings in the control panel.once rebooted right click on the desktop and flip the screen to landscape flipped.
    check out ebay item 171026144736 to see how it looks,i have done three of these now,i feel 2gb of ddr3 ram works best with a32gb ssd as for some reason thats the fastest combo.if you need any help or utilities i can email them to you as they are small files.
      My System SpecsSystem Spec

  5. #5


    uk
    Posts : 4
    windows 8


    Hi tam23 I'm in the same boat with a joojoo tablet running windows 8. I can't find all the required drivers to get the screen and multitouch all working correctly. Your help would be most appreciated.
      My System SpecsSystem Spec

  6. #6


    Posts : 21
    joojoo running windows 8 pro with multitouch.

    joojoo


    hi again,for touchscreen to work in windows 8 you do not need any drivers,its a simple firmware flash and then reboot.then you calibrate through the tablet settings in the control panel.flip your screen after this and you are good to go.
    can i upload the firmware flash and instructions onto this site?
      My System SpecsSystem Spec

  7. #7


    uk
    Posts : 4
    windows 8


    I got touch working and screen flipped but after calibration the touch isn't accurate. It's off by quite a bit. If you're able to upload what's required to get it all working that would be great.
      My System SpecsSystem Spec

  8. #8


    Posts : 21
    joojoo running windows 8 pro with multitouch.


    try this site,think I have uploaded it here
    http://www.filedropper.com/jjtpfirmware
      My System SpecsSystem Spec

  9. #9


    Posts : 21
    joojoo running windows 8 pro with multitouch.


    there is no read me so I will post a small walkthrough when I get 5 mins later
      My System SpecsSystem Spec

  10. #10


    Posts : 21
    joojoo running windows 8 pro with multitouch.


    extract all in a folder you can access easy on the joojoo.
    open up the hid_fwupdate _UniDisplay.exe
    click on load image
    click on the tc-v1062d-win.egxp file
    this is the windows flash
    the other one the tc_v1062c.egxp is to revert the joojoo back to joojoo touchscreen
    click go
    this will delete the old firmware and flash the new.will take a few seconds to a minute
    once done and it tells you so,reboot and then do the windows calibrate in the control panel,use a usb keyboard to tell windows its a touchscreen.
    very important-please uninstall every touchscreen driver and software you have installed,its not needed as windows 8 does everything.
    it will conflict i can assuree you.
    any help needed just ask.
      My System SpecsSystem Spec

Page 1 of 5 123 ... LastLast
Touchscreen on JooJoo Tablet is upside down!

Similar Threads
Thread Forum
Windows 8.1 Large thumbnail preview Icon upside down?!
Hi I recently upgraded to Windows 8.1 and some folders I have when I click for the Large thumbnail preview (Ctrl+Shift+2) The folder icon look like if was upside down, maybe this is the way it's intended, I don't know :b. I'll leave some screenshot so you guys can see what I mean. 56217This one...
General Support
Linx Tablet Touchscreen Unresponsive.
Hey guys, A friend of mines recently ran into some tablet issues and asked me to check it out. First, apps were not opening giving the error "The screen resolution is too low for this app to run". Googled the issue, and most recommended booting into safe mode. Went to config settings (IIRC), which...
Drivers & Hardware
Joojoo touchscreen upside down
i just installed windows 8 on the joojoo i see that theres a firmware to fix the screen from being upside down but i cant seem to find it can someone please upload or email it to me please pm me for my email thank you so much,
Drivers & Hardware
Everything has gone upside down
I was trying to learn how do use the numeric keyboard for Spanish accent marks. I pressed the Num Lock key on my deyboard then Alt GR then I started to press the numeric numbers & the the whole screen has gone upside down. I turned off the laptop & back on again but it was still upside down. What...
General Support
Starts upside down and won't auto rotate
So, I have a Lenovo x230 tablet that came installed with windows 7 pro. I upgraded to windows 8 Enterprise (thats what they have at school.) Just the other day, I shut down while in tablet mode. When I opened it back in regular mode the computer screen was upside down. Everytime since, I have to...
Drivers & Hardware
Need new monitor(s) */- touchscreen and hybrid tablet sys
Hi Currently on W7 however W8 will be installed over the coming months. Main use for PC is DAW (digital audio workstation)/music production work on a home hobiest basis (Cubase 7 etc). I always use a two monitor set up one for the main editing work and the second for controlling...
Drivers & Hardware
Stylus for non-tablet laptop touchscreen?
I have an iBuyPower Battalion Touch CZ-11 Ultra. Is it possible to get a stylus that would work for this screen? I'm not 100% sure on this one, but I think its touchscreen is similar to that of an iPad (with less touch points), and I know the iPad can't use say a Nintendo DS stylus. On the site,...
Drivers & Hardware
Eight Forums Android App Eight Forums IOS App Follow us on Facebook