Windows 8 and 8.1 Forums


How to change SATA mode to AHCI?

  1. #1


    Posts : 32
    Windows 8 Home 64-bit

    How to change SATA mode to AHCI?


    When I tried to change SATA mode to AHCI in BIOS, it bluescreened while loading. I looked up the registry tweaks, but my registry seems to already be set up for AHCI.

      My System SpecsSystem Spec

  2. #2


    Posts : 122
    Windows 8 64bit Pro
      My System SpecsSystem Spec

How to change SATA mode to AHCI?
Related Threads
I have successfully installed Windows 8 Pro x64 on an ASUS P8Z77-V Deluxe board on a SSD under UEFI/secure boot mode. Used the following settings: SATA Mode = AHCI Fastboot = enabled CSM = enabled Secureboot = Windows UEFI Everything works fine. Qcode = AO, performance is excellent etc....
Cant Change My SSD To AHCI Mode in Drivers & Hardware
hi, i have recently bought an SSD. I have heard from a youtube video that changing the Sata controller from IDE to AHCI can give me better performance but i tried to enable this and it doesn't recognize the drive. The PC will not boot in AHCI mode which meant i have to switch to IDE again. I have...
A couple of weeks ago, I cloned my HDD C drive to a new 250GB Samsung 840 EVO SSD. After fitting the SSD in place of the old HDD, the system rebooted fine and worked well with a very noticeable increase in the speed at which Windows loaded. However, Samsung's "Magician" software informed me...
Windows 8 Pro ~ SATA/AHCI in Installation & Setup
Hello, Looking for some help, I obviously didn't do enough homework..!! Hope this post is in the right place.? I have installed Windows 8 Pro on a small new ASUS Intel H61 based mini PC. Everything appears to be working fine.? I had 1 "!" in the device manager that went after doing Windows...
GIGABYTE - Motherboard - Socket 1155 - GA-P61-S3 (rev. 2.0) Ive installed the rest of the drivers provided by manufacturer except the SATA RAID/AHCI ones.The Intel Rapid Storage Technology gave me an error that I dont meet the system requirements so I no longer insisted with the others. Hmmm,...
Solved AHCI mode windows 8 pro in Installation & Setup
When I installed Windows 8 pro (oem x64) it wouldn't allow me to install with my sata controller set to AHCI mode so I set it to IDE and installed, now I'd like to have trim support so want to enable AHCI. Just enabling AHCI in BIOS boots too a blue :( (blue screen of unhappiness, BSoU??) screen...
this is an ASUS X83V notebook - Setting the SATA operation to 'compatible' mode at installation, Win8 CP installed fine, no hitches. Switched BIOS to Enhanced/full mode and it fails. I recall this sort of problem from XP installs where tricks were needed to support SATA, but I do not recall...
Eight Forums Android App Eight Forums IOS App Follow us on Facebook