Windows 8 and 8.1 Forums


Network Printer Problem

  1. #1

    Network Printer Problem


    I have been using my Canon ip5200R as a network printer and everything was working fine until yesterday. I can no longer print over the network for some reason. When I go to print it says it is ready but doesn't work if I search for a network printer it is not there. I can still print using a USB cable but prefer network printing.

    So if anyone has any ideas I would be most grateful. Thanks in advance.

      My System SpecsSystem Spec

  2. #2


    Don't know why it started working again!
      My System SpecsSystem Spec

Network Printer Problem
Related Threads
Hi! those problem were discussed here, but separately, and none of the solutions were not helpful. I am posting this again since I think those two problems are connected. So when I start computer (I will call it comp #1) my network drive is offline just as network printer. Mapped network drive...
Network Printer in Network & Sharing
I have a two computer wired to a Home Group network, comp. #1 is win 7 and has a printer installed with USB comp. #2 is Win. 8, I had the network up and running sharing filesand printer, now I suddenly cannot print from the Win 8 comp. when I try to ADDPRINTER the network printer shows up on the...
network printer in Network & Sharing
I have a home network consisting of a Win7 with a CanonMX922 printer installed and a Win8 computer, at one time I could print fromboth but now I cannot print from the Win8 machine so I ran the ADD A PRINTERfacility where the printer shows up on the dialog but will not allow me to addthe printer, I...
Network Printer Problem in Network & Sharing
My HP deskjet printer is hooked up to a Windows XP computer in which file and print sharing is enabled. Also the printer itself has sharing enabled and this serves as my network printer. After several hours I finally got the network printer to show up on my Windows 8 laptop and successfully print a...
set up network printer in Network & Sharing
had troubles running Xerox workcentre 3119 laser printer on homegroup. I thought to connect it straight to my router modem and run it as a network printer, thus bypassing homegroup altogether (am I right?). This printer does not have an ethernet slot. I tried plugging the printer's usb cord...
This morning I installed an optional update from Windows Update. It was Ralink Technology WLAN 802.11 wireless LAN card. Since then, when I try to print to my wireless network printer, the network would disconnect then come back on after a while. The update shows up in Update History as...
I have a color printer on the network. Printing a page from a website takes "forever". Actually it never finished. The page is about 1MB. Looking at the DU Meter Stopwatch the data rate on the network was about 250 Kb/s. Printing exactly the same page from my computer (the website is mine) was very...
Eight Forums Android App Eight Forums IOS App Follow us on Facebook