Windows 8 and 8.1 Forums

Drive "D" load fail

  1. #1


    Unknown
    Posts : 13
    Windows 8.1 64Bit

    Drive "D" load fail


    hello to all.
    i have this computer about 3 years or more and as its old i usually run optimization apps and cleanups every month.
    i cleaned the drives,defragmented them and other options until i get to disk check( i use boost speed program).
    i marked all and started the scan.
    "C" was postponed until next start and my "D" too cuz its my program drive and boost speed was in it, all other drives finished scan and fixing.
    i forgot to restart last night and this morning i just remembered that i forgot to put something in my usb drive for my school so started my pc and i saw that scanning "C", it was taking a time and i had no time so i hold the shutdown button for 5sec and i started again, but i saw scanning "D" i thought it will take no time but it was the same so i wait until 17% and did the same thing and started again.
    i didnt noticed it that time but when now i tried to complete my optimization i saw the "my computer" windows and the task bar as like this:
    Click image for larger version
    i try to open the drive and i see an error saying: "D:\ is not accessible Access is denied."
    i tried sfc \scannow and it said "Windows Resource Protection found corrupt files but was unable to fix some of them"
    the output of it was a 12mg text file so i uploaded it in the link below cuz maybe it might be helpfull:
    CBS
    i also tried to disk check again but it stucks at the 17% that i shutdown(waited for 30 mins).
    how i can restore my drive "D"?
    (im not very computer specialist so a little more details if possible, thanks)

      My System SpecsSystem Spec

  2. #2


    Since you cancelled the scan prematurely, twice, it's very likely that resulted in more filesystem corruption -- which then makes it likely that you're NOT going to be able to recover the files that got damaged. You should NEVER cancel a filesystem check part way through!

    What MIGHT work, is if you installed the free version of "recuva" and then ran it to see if it can find the files you want to restore. But, it's not going to repair damaged files.
      My System SpecsSystem Spec

  3. #3


    Unknown
    Posts : 13
    Windows 8.1 64Bit


    isnt there anyway to fix it?
    i just want to do my last chances like doing some cmd codes or someting like that.
    since i have a 2 linux based os as an backup bootable disk if a linux command can fix it i really want to know(Damn Small Linux + Tails)
    and one more thing, i heard something about pagefile for drive D when i was tweaking whit disk manager in administrator tools that said failed to read it somehow.
    and restarted several times and in some cases the icon loaded also i was able to see the properties of the drive(it showed me the drive size and how much available) and i tried disk check in that moment and told me it has errors to be fixed, but no button to click to fix it,it just informs me.
      My System SpecsSystem Spec

  4. #4


    Unknown
    Posts : 13
    Windows 8.1 64Bit


    -update-
    whenever i go to disk manager the icon and the other info of the drive will load, i also be able to scan it and it tells me it has problems but no way to fix it, it has log as below:
    -----------------------------------------------------------------
    Chkdsk was executed in scan mode on a volume snapshot.


    Checking file system on D:
    The type of the file system is NTFS.
    Shadow copying the specified volume is not supported.


    A snapshot error occured while scanning this drive. Run an offline scan and fix.
    -----------------------------------------------------------------
    - System
    - Provider
    [ Name] Chkdsk
    - EventID 26226
    [ Qualifiers] 0
    Level 4
    Task 0
    Keywords 0x80000000000000
    - TimeCreated
    [ SystemTime] 2015-04-20T13:58:02.000000000Z
    EventRecordID 294732
    Channel Application
    Computer LOGER-PC
    Security

    - EventData
    Checking file system on D: The type of the file system is NTFS. Shadow copying the specified volume is not supported. A snapshot error occured while scanning this drive. Run an offline scan and fix.


    -----------------------------------------------------------
      My System SpecsSystem Spec

  5. #5


    San Jose - California
    Posts : 2,847
    8.1x64PWMC Ubuntu14.04x64 MintMate17x64


    You can try:
    1. Control Panel->Recovery and create a USB stick to boot from
    2. Boot from the USB stick and go to Admin Command Prompt then type: chkdsk /r D:
      My System SpecsSystem Spec

  6. #6


    Unknown
    Posts : 13
    Windows 8.1 64Bit


    i did what you said topgundcp but it wont work

    see this:
    https://www.mediafire.com/?itytz8879fsjv6n
      My System SpecsSystem Spec

  7. #7


    San Jose - California
    Posts : 2,847
    8.1x64PWMC Ubuntu14.04x64 MintMate17x64


    After you click on "Next", you should have seen a screen as shown below with all the devices listed and I did not see it from your Video:
    Click image for larger version
    Next, I suggest that you open the Admin Command Prompt then run 2 commands below:
    1. dism /online /cleanup-image /restorehealth
    2. sfc /scannow

    To make sure there's no System Files Corruption and also, look in the Device Manager to see if there's any exclamation Marks on the USB driver.
      My System SpecsSystem Spec

  8. #8


    Unknown
    Posts : 13
    Windows 8.1 64Bit


    sorry for late reply, telephones are out here for a while for meanteance(word is a bit hard for me) and so im from my phone internet.

    as you see i only have this empty window!
    Click image for larger version
    in the device manager i see no exclamation mark or something like that, as you saw in the video my usb flash is working properly and its bootable cuz i boot my linuxes from it whitout any problem.
    Click image for larger versionClick image for larger version
    and first i already did sfc /scannow and here was the results>>>
    CBS

    the dism command was very slow but at end it gave me this result>>>
    -----------------------------------------------------------
    Deployment Image Servicing and Management tool
    Version: 6.3.9600.17031


    Image Version: 6.3.9600.17031


    [==========100.0%==========]


    Error: 0x800f0906


    The source files could not be downloaded.
    Use the "source" option to specify the location of the files that are required to restore the feature.
    For more information on specifying a source location,see
    Configure a Windows Repair Source .


    The DISM log file can be found at C:\Windows\Logs\DISM\dism.log
    ----------------------------------------------------------------------------
    Click image for larger version
    ----------------------------
    i also uploaded the log file and here it is>>>
    https://www.sendspace.com/file/wf2ysj

    i checked the link it gave to me (Configure a Windows Repair Source) but i got nothing out of it...it was about group policy and something like that, well i cant understand it well.

    well what to do now?
      My System SpecsSystem Spec

  9. #9


    San Jose - California
    Posts : 2,847
    8.1x64PWMC Ubuntu14.04x64 MintMate17x64


    OK. I can see that there's nothing wrong with your USB stick but since you have some corrupted system files that might prevent you to create the Recovery disk.

    Bad news that you can not successfully run DISM which has components for SFC to run and repair the corrupted files. You can re-try to run DISM & SFC couple of times to see if it can correct the problem. If not, you might have to do a system refresh to get Windows to work properly again.

    The idea to create the Recovery disk so you can open the Admin Command and run chkdsk on D: and since you cannot create it. If you wish, you can create the Macrium Rescue disk which has Windows PE and you can open the Command prompt to run chkdsk.

    1. Download: https://drive.google.com/open?id=0Bx...dVE&authuser=0
    2. Use: Rufus - Create bootable USB to create a bootable USB
    3. Boot up then click on the Command Prompt icon on bottom left of the screen then try to run chkdsk from there.

    Good Luck !!!

    P.S. You can use the procedure in this link to post attachment & Images instead of using MediaFire:
    Screenshots and Files - Upload and Post in Eight Forums
      My System SpecsSystem Spec

  10. #10


    Unknown
    Posts : 13
    Windows 8.1 64Bit


    well i will try my linux to see if the drive is access able whit that or not, to see if its windows problem or not.

    but i think its windows problem somehow,,,well why? see this>>>
    bandicam 2015-04-23 11-07-17-715

    P.S. well first the .avi format is not in the list of uploadable formats and second of all even if i compress it, it will be more than 8MB.
    for now my best choice is mediafire,
    and lucky me the telephones and internet is up now.
      My System SpecsSystem Spec

Page 1 of 2 12 LastLast
Drive "D" load fail
Related Threads
Solved Cpu error "PCH" test fail. in Drivers & Hardware
Hello, I got this error with my i7 4790k @ stock. Is this normal? Could it be that my bios version is not supported? It works in games but never goes above 60 procent.
Is there any way to load the "Screen Saver Settings" dialog/ control panel at boot-up/ login in a similar fashion to applications? If not, then would I need to write a software program of some type via OS-specific commands (I presume) for opening this dialog to be executed at boot-up/ login...
I recently installed a clean installation of windows 8.1 x64 on my aging laptop, but for whatever reason the system fails to "fast start" or resume from hibernation as it will reach the window's boot logo with the spiraling dots albeit spiraling "very slowly" with the cpu fan spooling up audibly in...
Hi all, So I'm kind of stuck.. I currently have the problem where I am in an endless cycle of "loading files" -> "Windows Boot Manager" (see: How To Boot Into Safe Mode On Windows 8 (The Easy Way)). I have tried to load all of the options -- and none successfully load. I also end up at...
I am running Windows 8.1x64 on an HP DV6 laptop with 8GB RAM & 720GB HDD. Sys Specs - Imgur Every time I try to open the "Computer" folder (formerly "My Computer,") the window shows that it's loading for a very long time. It'll eventually come up and show me what drives are mounted. This has been...
Windows 8 Install "Load Media Driver" in Installation & Setup
Hi all, I am trying to install a oem copy of windows 8 64 bit onto my desktop, using a microsoft install dvd. I've installed xp, vista, and windows 7 onto it without any issues whatsoever, however when trying to install windows 8, I keep getting an error in windows setup that states the following:...
Eight Forums Android App Eight Forums IOS App Follow us on Facebook