Windows 8 and 8.1 Forums


Webcam driver compatibility problem(s)

  1. #1


    Posts : 5
    Windows 8.1

    Webcam driver compatibility problem(s)


    Hi everyone!

    I have HAMA AC-150 webcam and it works well on every system but i can't find driver for 8.1 x64. I tried install it with Win 7 compatibility mode. I installed VMware Player and installed Win 7 x64 just to backup webacam driver with Driver Magician, but when i try to install it it's not signed and i can't so i tried this:

    Solution
    Disable signature verification of drivers:

    Go to Start Menu > Run and type the following command:

    bcdedit /set nointegritychecks ON

    If the Run command is unavailable in start menu, please refer to this FAQ
    Restart the PC and install the unsigned driver
    Note that it is highly recommended to enable the signature verification of drivers
    Go to Start Menu > Run and type the following command:

    bcdedit /set nointegritychecks OFF

    Restart your PC
    Now i don't have my webcam and my startup is weird. When it comes to logging and i enter my PIN mouse is not there and no rotating thing, about three times comes the "lockscreen" and then starts to rotate and screen come's without icons for few seconds. Can i do anything to save system of reinstalling it and is there ANYTHING that i can do with the driver coz i NEED webcam. If i could afford new one i would buy it and not bothering anyone. Even linux lagged me, every OS but this one is just perfect and i wanna continue using it ofc.. Thank You very much everyone and this is ID of webcam:

    USB\VID_0C45&PID_6102&REV_0101

    P.S. It recognize it as "HP Basic Starter Camera" automaticly, but it has to show "Hama Webcam AC-150".

      My System SpecsSystem Spec

  2. #2


    Posts : 2,676
    Windows 3.1 > Windows 10
      My System SpecsSystem Spec

  3. #3


    Posts : 5
    Windows 8.1


    At this official driver i tried most to make it work, same...
      My System SpecsSystem Spec

  4. #4


    Posts : 5
    Windows 8.1


    [Device Install (DiShowUpdateDevice) - USB\VID_0C45&PID_6102\5&3402175C&0&1]
    >>> Section start 2015/04/16 16:05:17.430
    cmd: "C:\Windows\system32\mmc.exe" C:\Windows\system32\devmgmt.msc
    dvi: {DIF_UPDATEDRIVER_UI} 16:05:17.433
    dvi: CoInstaller 1: Enter 16:05:17.434
    dvi: CoInstaller 1: Exit
    dvi: Class installer: Enter 16:05:17.436
    dvi: Class installer: Exit
    dvi: Default installer: Enter 16:05:17.439
    dvi: Default installer: Exit
    dvi: {DIF_UPDATEDRIVER_UI - exit(0xe000020e)} 16:05:17.443
    ndv: {Update Driver Software Wizard for USB\VID_0C45&PID_6102\5&3402175C&0&1}
    dvi: {DIF_SELECTDEVICE} 16:05:18.899
    dvi: CoInstaller 1: Enter 16:05:18.900
    dvi: CoInstaller 1: Exit
    dvi: Class installer: Enter 16:05:18.902
    dvi: Class installer: Exit
    dvi: {DIF_SELECTDEVICE - exit(0xe000020e)} 16:05:18.904
    dvi: {DIF_SELECTDEVICE} 16:05:23.714
    dvi: CoInstaller 1: Enter 16:05:23.715
    dvi: CoInstaller 1: Exit
    dvi: Class installer: Enter 16:05:23.718
    dvi: Class installer: Exit
    dvi: {DIF_SELECTDEVICE - exit(0xe000020e)} 16:05:23.721
    sto: {Setup Import Driver Package: c:\users\imessa\desktop\hama webcam ac-150 m\oem11.inf} 16:05:25.163
    inf: Provider: Sonix
    inf: Class GUID: {6bdd1fc6-810f-11d0-bec7-08002be2092f}
    inf: Driver Version: 10/16/2007,5.18.1206.100
    sto: {Copy Driver Package: c:\users\imessa\desktop\hama webcam ac-150 m\oem11.inf} 16:05:25.236
    sto: Driver Package = c:\users\imessa\desktop\hama webcam ac-150 m\oem11.inf
    sto: Flags = 0x00000007
    sto: Destination = C:\Users\iMessa\AppData\Local\Temp\{4de43845-c08b-014f-bf9b-a93705182d2e}
    sto: Copying driver package files to 'C:\Users\iMessa\AppData\Local\Temp\{4de43845-c08b-014f-bf9b-a93705182d2e}'.
    inf: Could not find include INF file "Layout.inf". Error = 0x00000002
    !!! flq: Error installing file (0x00000002)
    !!! flq: Error 2: The system cannot find the file specified.
    ! flq: SourceFile - 'c:\users\imessa\desktop\hama webcam ac-150 m\.\x64\snpstd3.sys'
    ! flq: TargetFile - 'C:\Users\iMessa\AppData\Local\Temp\{4de43845-c08b-014f-bf9b-a93705182d2e}\.\x64\snpstd3.sys'
    !!! cpy: Failed to copy file 'c:\users\imessa\desktop\hama webcam ac-150 m\.\x64\snpstd3.sys' to 'C:\Users\iMessa\AppData\Local\Temp\{4de43845-c08b-014f-bf9b-a93705182d2e}\.\x64\snpstd3.sys'. Error = 0x00000002
    !!! flq: SPFQNOTIFY_COPYERROR: returned SPFQOPERATION_ABORT.
    !!! flq: Error 995: The I/O operation has been aborted because of either a thread exit or an application request.
    !!! flq: FileQueueCommit aborting!
    !!! flq: Error 995: The I/O operation has been aborted because of either a thread exit or an application request.
    !!! sto: Failed to copy driver package to 'C:\Users\iMessa\AppData\Local\Temp\{4de43845-c08b-014f-bf9b-a93705182d2e}'. Error = 0x00000002
    sto: {Copy Driver Package: exit(0x00000002)} 16:05:25.481
    sto: {Setup Import Driver Package - exit (0x00000002)} 16:05:25.483
    !!! ndv: Driver package import failed for device.
    !!! ndv: Error 2: The system cannot find the file specified.
    ndv: {Update Driver Software Wizard exit(00000002)}
    <<< Section end 2015/04/16 16:05:28.604
    <<< [Exit status: FAILURE(0x00000002)]
    I tried copy it manually but i think it creates new foler every time and folder "." doesn't exist ofc.. Please help i really need it.
      My System SpecsSystem Spec

  5. #5


    Posts : 2,676
    Windows 3.1 > Windows 10


    https://www.hama.com/webresources/dr...vista_v1.0.zip

    I extracted the zip file above and ran the 00086510.exe on a windows 8.1 x64 PC without any errors
      My System SpecsSystem Spec

  6. #6


    Posts : 5
    Windows 8.1


    Quote Originally Posted by KYHI View Post
    https://www.hama.com/webresources/dr...vista_v1.0.zip

    I extracted the zip file above and ran the 00086510.exe on a windows 8.1 x64 PC without any errors
    I don't have problems with installing it too but it's useless when it can't recognize that driver. My cam is recognized as "HP Basic Starter Camera" from Windows it self and when i wanna use new driver it's just not there. Installation is fine but no driver to pick. With "HP Basic Starter Camera" driver, screen is black.
      My System SpecsSystem Spec

  7. #7


    Posts : 2,676
    Windows 3.1 > Windows 10
      My System SpecsSystem Spec

  8. #8


    Posts : 5
    Windows 8.1


    Quote Originally Posted by KYHI View Post
    Yeees! Thank You very much! It works now ! Solved!
      My System SpecsSystem Spec

  9. #9


    Posts : 2,676
    Windows 3.1 > Windows 10


    I had a similar problem - with an older dell webcam.. windows will keep updating the camera driver and you will keep getting a black view windows..

    you will have to uninstall the HP camera driver, update driver to point to correct driver, windows will update that back to HP driver, then you have to Roll Back to correct driver
      My System SpecsSystem Spec

  10. #10


    Posts : 2,676
    Windows 3.1 > Windows 10


    Quote Originally Posted by Messa View Post
    Quote Originally Posted by KYHI View Post
    program files (x86) \ snpstd3
    Yeees! Thank You very much! It works now ! Solved!
    Good, hopefully it will continue to work, but if not I explained why and how to..
      My System SpecsSystem Spec

Page 1 of 2 12 LastLast
Webcam driver compatibility problem(s)
Related Threads
Hi all, I have a 5-month-old machine with Windows 8.1 installed (All the updates are in). On this I have an AMD Sapphire Radeon R7 260X Graphics card from which I had no problem since I bought it. I play games very smoothly without any crashes etc. But, although at first I could make video calls...
Driver of webcam currupted in Drivers & Hardware
I have dell inspiron laptop and 32 bit windows-8. My laptop has inbuilt webcam and it was working fine. But i installed a new external webcam. And both the webcams stopped working. I tried installing driver software from the driver-DVD of my laptop but it also didnt fix it. Please help me fix...
Hello, This Emachines E525 Laptop has a built in Camera and i wanted to use it to Recode video and save it onto my hard drive Please note: i am trying to recode a video using my laptop camera so i will save the video in my hard drive so first issue the driver wont work...
Webcam Driver - Asus N53SN in Drivers & Hardware
Hello, Upgraded my Asus N53SN from Windows 7 to Windows 8. Webcam driver isn't available at Asus Support Section. Any advise? :rolleyes:
Labtec usb webcam driver in Drivers & Hardware
I have a labtec usb camera. It worked fine on windows 7. But when I upgraded to windows 8 I can no longer use it. Is there any driver for labtec camera for windows 8? I hope someone can help me :)
Unable to use the webcam after Win8 installation. -"Your webcam has stopped working properly because a compatible driver isn't available for this version of Windows. The model name of your webcam is ZS211" I searched on the web for its updated drivers but there is no version of it beyond winXP....
Hi there all try this tiny webcam app if you are having trouble getting a webcam to work on your laptop (Internal USB based ones). Usually the built in ones have trouble working in newer versions of Windows. It's a Portable app so nothing to install -- can run it off your usb stick if you want....
Eight Forums Android App Eight Forums IOS App Follow us on Facebook