Solved Webcam driver compatibility problem(s)

Messa

New Member
Messages
5
Hi everyone!

I have HAMA AC-150 webcam and it works well on every system but i can't find driver for 8.1 x64. I tried install it with Win 7 compatibility mode. I installed VMware Player and installed Win 7 x64 just to backup webacam driver with Driver Magician, but when i try to install it it's not signed and i can't so i tried this:

Solution
Disable signature verification of drivers:

Go to Start Menu > Run and type the following command:

bcdedit /set nointegritychecks ON

If the Run command is unavailable in start menu, please refer to this FAQ
Restart the PC and install the unsigned driver
Note that it is highly recommended to enable the signature verification of drivers
Go to Start Menu > Run and type the following command:

bcdedit /set nointegritychecks OFF

Restart your PC

Now i don't have my webcam and my startup is weird. When it comes to logging and i enter my PIN mouse is not there and no rotating thing, about three times comes the "lockscreen" and then starts to rotate and screen come's without icons for few seconds. Can i do anything to save system of reinstalling it and is there ANYTHING that i can do with the driver coz i NEED webcam. If i could afford new one i would buy it and not bothering anyone. Even linux lagged me, every OS but this one is just perfect and i wanna continue using it ofc.. Thank You very much everyone and this is ID of webcam:

USB\VID_0C45&PID_6102&REV_0101

P.S. It recognize it as "HP Basic Starter Camera" automaticly, but it has to show "Hama Webcam AC-150".
 

My Computer

System One

  • OS
    Windows 8.1
    Computer type
    PC/Desktop
    CPU
    AMD Athlon X2 Dual Core Processor 4000+
    Motherboard
    MS-7369
    Memory
    4 GB
    Graphics Card(s)
    NVIDIA GeForce 610
    Browser
    Firefox
    Antivirus
    ESET Smart Security 8
[Device Install (DiShowUpdateDevice) - USB\VID_0C45&PID_6102\5&3402175C&0&1]
>>> Section start 2015/04/16 16:05:17.430
cmd: "C:\Windows\system32\mmc.exe" C:\Windows\system32\devmgmt.msc
dvi: {DIF_UPDATEDRIVER_UI} 16:05:17.433
dvi: CoInstaller 1: Enter 16:05:17.434
dvi: CoInstaller 1: Exit
dvi: Class installer: Enter 16:05:17.436
dvi: Class installer: Exit
dvi: Default installer: Enter 16:05:17.439
dvi: Default installer: Exit
dvi: {DIF_UPDATEDRIVER_UI - exit(0xe000020e)} 16:05:17.443
ndv: {Update Driver Software Wizard for USB\VID_0C45&PID_6102\5&3402175C&0&1}
dvi: {DIF_SELECTDEVICE} 16:05:18.899
dvi: CoInstaller 1: Enter 16:05:18.900
dvi: CoInstaller 1: Exit
dvi: Class installer: Enter 16:05:18.902
dvi: Class installer: Exit
dvi: {DIF_SELECTDEVICE - exit(0xe000020e)} 16:05:18.904
dvi: {DIF_SELECTDEVICE} 16:05:23.714
dvi: CoInstaller 1: Enter 16:05:23.715
dvi: CoInstaller 1: Exit
dvi: Class installer: Enter 16:05:23.718
dvi: Class installer: Exit
dvi: {DIF_SELECTDEVICE - exit(0xe000020e)} 16:05:23.721
sto: {Setup Import Driver Package: c:\users\imessa\desktop\hama webcam ac-150 m\oem11.inf} 16:05:25.163
inf: Provider: Sonix
inf: Class GUID: {6bdd1fc6-810f-11d0-bec7-08002be2092f}
inf: Driver Version: 10/16/2007,5.18.1206.100
sto: {Copy Driver Package: c:\users\imessa\desktop\hama webcam ac-150 m\oem11.inf} 16:05:25.236
sto: Driver Package = c:\users\imessa\desktop\hama webcam ac-150 m\oem11.inf
sto: Flags = 0x00000007
sto: Destination = C:\Users\iMessa\AppData\Local\Temp\{4de43845-c08b-014f-bf9b-a93705182d2e}
sto: Copying driver package files to 'C:\Users\iMessa\AppData\Local\Temp\{4de43845-c08b-014f-bf9b-a93705182d2e}'.
inf: Could not find include INF file "Layout.inf". Error = 0x00000002
!!! flq: Error installing file (0x00000002)
!!! flq: Error 2: The system cannot find the file specified.
! flq: SourceFile - 'c:\users\imessa\desktop\hama webcam ac-150 m\.\x64\snpstd3.sys'
! flq: TargetFile - 'C:\Users\iMessa\AppData\Local\Temp\{4de43845-c08b-014f-bf9b-a93705182d2e}\.\x64\snpstd3.sys'
!!! cpy: Failed to copy file 'c:\users\imessa\desktop\hama webcam ac-150 m\.\x64\snpstd3.sys' to 'C:\Users\iMessa\AppData\Local\Temp\{4de43845-c08b-014f-bf9b-a93705182d2e}\.\x64\snpstd3.sys'. Error = 0x00000002
!!! flq: SPFQNOTIFY_COPYERROR: returned SPFQOPERATION_ABORT.
!!! flq: Error 995: The I/O operation has been aborted because of either a thread exit or an application request.
!!! flq: FileQueueCommit aborting!
!!! flq: Error 995: The I/O operation has been aborted because of either a thread exit or an application request.
!!! sto: Failed to copy driver package to 'C:\Users\iMessa\AppData\Local\Temp\{4de43845-c08b-014f-bf9b-a93705182d2e}'. Error = 0x00000002
sto: {Copy Driver Package: exit(0x00000002)} 16:05:25.481
sto: {Setup Import Driver Package - exit (0x00000002)} 16:05:25.483
!!! ndv: Driver package import failed for device.
!!! ndv: Error 2: The system cannot find the file specified.
ndv: {Update Driver Software Wizard exit(00000002)}
<<< Section end 2015/04/16 16:05:28.604
<<< [Exit status: FAILURE(0x00000002)]

I tried copy it manually but i think it creates new foler every time and folder "." doesn't exist ofc.. Please help i really need it.
 

My Computer

System One

  • OS
    Windows 8.1
    Computer type
    PC/Desktop
    CPU
    AMD Athlon X2 Dual Core Processor 4000+
    Motherboard
    MS-7369
    Memory
    4 GB
    Graphics Card(s)
    NVIDIA GeForce 610
    Browser
    Firefox
    Antivirus
    ESET Smart Security 8
https://www.hama.com/webresources/drivers/00086/00086510_w2000xpvista_v1.0.zip

I extracted the zip file above and ran the 00086510.exe on a windows 8.1 x64 PC without any errors

I don't have problems with installing it too but it's useless when it can't recognize that driver. My cam is recognized as "HP Basic Starter Camera" from Windows it self and when i wanna use new driver it's just not there. Installation is fine but no driver to pick. With "HP Basic Starter Camera" driver, screen is black.
 

My Computer

System One

  • OS
    Windows 8.1
    Computer type
    PC/Desktop
    CPU
    AMD Athlon X2 Dual Core Processor 4000+
    Motherboard
    MS-7369
    Memory
    4 GB
    Graphics Card(s)
    NVIDIA GeForce 610
    Browser
    Firefox
    Antivirus
    ESET Smart Security 8
I had a similar problem - with an older dell webcam.. windows will keep updating the camera driver and you will keep getting a black view windows..

you will have to uninstall the HP camera driver, update driver to point to correct driver, windows will update that back to HP driver, then you have to Roll Back to correct driver
 

My Computer

System One

  • OS
    Windows 3.1 > Windows 10
    Computer type
    PC/Desktop
    System Manufacturer/Model
    Dell XPS 8700
    CPU
    I7
    Memory
    24 GB
I have the same problem with Windows 10. Could you please provide the link again?
Hey sorry for the delay but I have found a solution. You need to install the software that is for windows 7. Then you have to Disable Driver Signature Verification ( How to Disable Driver Signature Verification on 64-Bit Windows 8 or 10 (So That You Can Install Unsigned Drivers) ). After you have disabled it, restart the PC and then go to device manager, right click on the camera and click on upgrade driver. Choose the "I have a disk" option and choose the directory where the software is installed. Windows will ask you if you want to install drivers without signature and you have to agree. The drivers will install correctly then. Turn on the Driver Signature Verification and restart.
 

My Computer

System One

  • OS
    Windows 10
Back
Top