Windows 8 and 8.1 Forums


Not All Hardware Showing

  1. #21


    Posts : 1,851
    8250 x86 + 7 SP1 x86 + Ubuntu 12.04 LTS x86


    Whoops - missed one - also install the J-Micron storage driver from the following link:

    ftp://driver.jmicron.com.tw/SATA_Con...17.63_WHQL.zip

    Code:
    Name    Standard Dual Channel PCI IDE Controller
    Manufacturer    (Standard IDE ATA/ATAPI controllers)
    Status    OK
    PNP Device ID    PCI\VEN_197B&DEV_2362&SUBSYS_84601043&REV_10\4&820CCE8&0&00E4
    I/O Port    0x0000DC00-0x0000DC07
    I/O Port    0x0000D880-0x0000D883
    I/O Port    0x0000D800-0x0000D807
    I/O Port    0x0000D480-0x0000D483
    I/O Port    0x0000D400-0x0000D40F
    Memory Address    0xFBDFFC00-0xFBDFFDFF
    IRQ Channel    IRQ 16
    Driver    c:\windows\system32\drivers\pciide.sys (6.2.8250.0, 13.80 KB (14,136 bytes), 2/17/2012 9:20 PM)

      My System SpecsSystem Spec

  2. #22


    Hi all,

    I must be brain dead, as I can not find any later drivers that the installed ones.
    A little help there?

    I was able to change drive E: back to NTFS from FAT32, no problem.
    It is fine and works great in Win 8 64 OS.

    Had already installed J-Micron.

    Thanx for the help so far!!

    What be next?

    Take care...........
      My System SpecsSystem Spec

  3. #23


    Posts : 1,851
    8250 x86 + 7 SP1 x86 + Ubuntu 12.04 LTS x86


    Install from motherboard site.
      My System SpecsSystem Spec

  4. #24


    Quote Originally Posted by GMan View Post
    Install from motherboard site.
    Hi bud,

    I had been, before your reply, to the Asus site and downloaded every driver for my X58.
    Either they were updated, or got error message:
    "Does not support this Operating System: WNT_6.2P_64_MCE.

    Still, to no avail.

    I guess I will live with the one player.

    Take care, and thanks to all for the assistance............
      My System SpecsSystem Spec

  5. #25


    Posts : 1,851
    8250 x86 + 7 SP1 x86 + Ubuntu 12.04 LTS x86


    Install using device manager. Right click on the specific storage to update, Update driver software, browse my computer, let me pick, have disk, browse...

    Find and double click on the .inf file. Click next, click ok and it will install.

    Reboot when done. Do for both of the motherboard ones I've shown.

    Also do the same for the Marvell if it doesn't show as Marvell in the Device Manager yet.
      My System SpecsSystem Spec

  6. #26


    Quote Originally Posted by GMan View Post
    Install using device manager. Right click on the specific storage to update, Update driver software, browse my computer, let me pick, have disk, browse...

    Find and double click on the .inf file. Click next, click ok and it will install.

    Reboot when done. Do for both of the motherboard ones I've shown.

    Also do the same for the Marvell if it doesn't show as Marvell in the Device Manager yet.
    Hi GMan,

    Did that way too, before we typed.

    Still to no avail, get message my driver is older than installed driver, do I want to overwrite with older driver.

    I am at my wits ends, not a long trip tho.

    Take care...........
      My System SpecsSystem Spec

  7. #27


    Posts : 1,851
    8250 x86 + 7 SP1 x86 + Ubuntu 12.04 LTS x86


    So did you tell is yes so it installs?

    If you didn't change anything from last I've seen, then you're still not using the proprietary driver(s).

    I really don't think it would even say anything about older or newer if you double click on the inf file itself.

    The goal is to get them to use iaStor.sys, jmcr.sys and mv64xx.sys instead of all using pciide.sys.
      My System SpecsSystem Spec

  8. #28


    Hi GMan,

    Here is the latest .zip of msinfo32 from Win 8 64.

    The drivers installed, so they should be updated.

    Still no second blu-ray player tho.

    Take care..........
    Not All Hardware Showing Attached Files
      My System SpecsSystem Spec

  9. #29


    Posts : 1,851
    8250 x86 + 7 SP1 x86 + Ubuntu 12.04 LTS x86


    Code:
    Name    ATA Channel 0
    Manufacturer    (Standard IDE ATA/ATAPI controllers)
    Status    OK
    PNP Device ID    PCIIDE\IDECHANNEL\4&38D74911&0&0
    Driver    c:\windows\system32\drivers\atapi.sys (6.2.8250.0, 26.80 KB (27,448 bytes), 2/17/2012 9:20 PM)
        
    Name    ATA Channel 1
    Manufacturer    (Standard IDE ATA/ATAPI controllers)
    Status    OK
    PNP Device ID    PCIIDE\IDECHANNEL\4&38D74911&0&1
    Driver    c:\windows\system32\drivers\atapi.sys (6.2.8250.0, 26.80 KB (27,448 bytes), 2/17/2012 9:20 PM)
        
    Name    Intel(R) ICH10 Family 2 port Serial ATA Storage Controller 2 - 3A26
    Manufacturer    Intel
    Status    OK
    PNP Device ID    PCI\VEN_8086&DEV_3A26&SUBSYS_82D41043&REV_00\3&11583659&0&FD
    I/O Port    0x0000A000-0x0000A007
    I/O Port    0x00009C00-0x00009C03
    I/O Port    0x00009880-0x00009887
    I/O Port    0x00009800-0x00009803
    I/O Port    0x00009480-0x0000948F
    I/O Port    0x00009400-0x0000940F
    IRQ Channel    IRQ 20
    Driver    c:\windows\system32\drivers\pciide.sys (6.2.8250.0, 13.80 KB (14,136 bytes), 2/17/2012 9:20 PM)
        
    Name    Intel(R) ICH10 Family 4 port Serial ATA Storage Controller 1 - 3A20
    Manufacturer    Intel
    Status    OK
    PNP Device ID    PCI\VEN_8086&DEV_3A20&SUBSYS_82D41043&REV_00\3&11583659&0&FA
    I/O Port    0x00009000-0x00009007
    I/O Port    0x00008C00-0x00008C03
    I/O Port    0x00008880-0x00008887
    I/O Port    0x00008800-0x00008803
    I/O Port    0x00008480-0x0000848F
    I/O Port    0x00008400-0x0000840F
    IRQ Channel    IRQ 20
    Driver    c:\windows\system32\drivers\pciide.sys (6.2.8250.0, 13.80 KB (14,136 bytes), 2/17/2012 9:20 PM)
        
    Name    ATA Channel 0
    Manufacturer    (Standard IDE ATA/ATAPI controllers)
    Status    OK
    PNP Device ID    PCIIDE\IDECHANNEL\4&3189A216&0&0
    Driver    c:\windows\system32\drivers\atapi.sys (6.2.8250.0, 26.80 KB (27,448 bytes), 2/17/2012 9:20 PM)
        
    Name    ATA Channel 1
    Manufacturer    (Standard IDE ATA/ATAPI controllers)
    Status    OK
    PNP Device ID    PCIIDE\IDECHANNEL\4&3189A216&0&1
    Driver    c:\windows\system32\drivers\atapi.sys (6.2.8250.0, 26.80 KB (27,448 bytes), 2/17/2012 9:20 PM)
    Still don't have iaStor.sys installed for Intel, and very old 2009 driver installed for Marvell, but excellent job with the J-Micron from the link I posted.

    My concern at the moment has nothing to do with the BluRay drive at all. I'm helping you make the system well and when that's all said and done, then we can begin to figure out why the drive is missing.

    Please post new msinfo32 after the iaStor.sys is being used for the Intel SATAs above. Also, install "Marvell 91XX Controller Beta Driver V1.2.0.1002 for Windows 32/64bit Vista & 32/64bit" from here: ASUS - Motherboards- ASUS SABERTOOTH X58 <<<< so it has 2011 driver instead of 2009.



    I doubt it very much because it is showing pciide.sys for the Intel ones - but it might be worth checking in the device manager for their properties to see which driver it shows as being used. If iaStor.sys is shown there, then it is installed.
      My System SpecsSystem Spec

  10. #30


    Hi again,
    Need to start over, as after getting the new Marvell driver install, I was installing the iaStor driver and got a blue screen in Windows 8.
    I can not get into it now, so I must use my backup from last night, and then do Marvell and iaStor install again.
    It will take some time, so will update in the morn.
    God, I love computers.
    Take care.......
      My System SpecsSystem Spec

Page 3 of 4 FirstFirst 1234 LastLast
Not All Hardware Showing
Related Threads
Hardware update. in Drivers & Hardware
Hi, Im looking to buy a new Motherboard, RAM memory and Chipset, could someone help me ? Looking for the best option price/quality. Thanks for the time spent with this issue.
Possible Hardware Issue in BSOD Crashes and Debugging
Ok first things first, I'm new to the forum so if a Mod thinks this thread is best placed elsewhere then move away :) I'm running Windows 8 on this Sony Vaio laptop. My problems first started a couple of weeks ago, out of no where the laptop starting taking ages to do simple tasks (opening...
Hardware dilemma in Drivers & Hardware
I have two optical drives that worked fine under XP. One is a DVD-RW and the other is a CD-RW. Both show up on the control panel, both show up as drives, but no matter what disc I put in, the drives rev up and then I get a window popping up that says "Please put a disc in the drive" I also...
Hardware Rate? in Drivers & Hardware
Hey, I just have a question on how this laptop rates among you guys. HP-Envy M6, 15.6 i5 3rd Gen (with hd 4000) 8GB DDR3 750GB HDD For $400, is this worth it? Or is there something better I could get with $400. (I'm not too worried about money, just want to know if the specs are worth...
My system uses an Intel Pentium 4 CPU (3.00GHZ 2.99 GHz) with 3GB RAM I have been using Windows 7 Ultimate for a couple of years. On a seperate partition I had installed Windows 8 Consumer Preview which ran OK. Now I would like to replace this with a later (prerelease) version of W8 but I get a...
So for some reason the BIOS suddenly decided all my SATA ports should be hot swappable I suppose. My C drive where my Windows install resides suddenly shows up under the "Safely remove hardware and Eject Media" thingy. Normally this wouldn't bother me, but now it's showing up as "oCsria roFcr e 3SS...
3GB hardware reserved in Installation & Setup
I installed Windows 8 on a USB stick (with the help of WAIK). When I run that, I see nearly 3GB of hardware reserved RAM - total RAM is 6GB. When I run Windows 7 on the same system from my SSD, there are only a few MBs as hardware reserved. Does anybody have an idea why the USB stick installed...
Eight Forums Android App Eight Forums IOS App Follow us on Facebook