Windows 8 and 8.1 Forums


Does your PC have a working touch screen with W8CP?

  1. #11


    Posts : 6
    Windows 8 RTM 9200


    Hey bud I have the same setup, Windows 8 on my IQ500 series all in one. I installed the drivers and had to manually find the intel 965 drivers for the display but the touch is still not working. Is there anyway you can help me out to try to make the touch work. maybe, if you can send me the drivers for it. It'l be much appreciated. Thanks.

      My System SpecsSystem Spec

  2. #12


    Posts : 8
    Windows 8 x64


    Quote Originally Posted by drdumasss View Post
    Hey bud I have the same setup, Windows 8 on my IQ500 series all in one. I installed the drivers and had to manually find the intel 965 drivers for the display but the touch is still not working. Is there anyway you can help me out to try to make the touch work. maybe, if you can send me the drivers for it. It'l be much appreciated. Thanks.
    Installed what drivers? I installed Windows 8, albeit on an IQ505 (your model may be different), and all drivers required were included in Windows. The touch screen worked just fine right after install. It only worked with one touch input though. To get two-point working, I had to install the driver from Next Window. Just last week I was perusing their website to try to see if they had updated their driver, as after installing it, the onscreen keyboard got very very small and was unusable. They no longer have the driver available on their website!!! I don't know why, but I have it stored at home if you'd like it, just send me a PM and I will send it to you!

    Also, if you seem to think your touch screen is always touching in the top-left corner, you can do a hardware calibration by tapping the scroll lock 5 times quickly. You'll hear a beep and your mouse cursor will move. Touch the mouse cursor everywhere it moves until it's finished in the middle. This has saved me a few times when I couldn't get it to work!
      My System SpecsSystem Spec

  3. #13


    Posts : 6
    Windows 8 RTM 9200


    Quote Originally Posted by CrMo4130 View Post
    Quote Originally Posted by drdumasss View Post
    Hey bud I have the same setup, Windows 8 on my IQ500 series all in one. I installed the drivers and had to manually find the intel 965 drivers for the display but the touch is still not working. Is there anyway you can help me out to try to make the touch work. maybe, if you can send me the drivers for it. It'l be much appreciated. Thanks.
    Installed what drivers? I installed Windows 8, albeit on an IQ505 (your model may be different), and all drivers required were included in Windows. The touch screen worked just fine right after install. It only worked with one touch input though. To get two-point working, I had to install the driver from Next Window. Just last week I was perusing their website to try to see if they had updated their driver, as after installing it, the onscreen keyboard got very very small and was unusable. They no longer have the driver available on their website!!! I don't know why, but I have it stored at home if you'd like it, just send me a PM and I will send it to you!

    Also, if you seem to think your touch screen is always touching in the top-left corner, you can do a hardware calibration by tapping the scroll lock 5 times quickly. You'll hear a beep and your mouse cursor will move. Touch the mouse cursor everywhere it moves until it's finished in the middle. This has saved me a few times when I couldn't get it to work!

    Well all the drivers were preinstalled except the display card driver. i found out the model number of the intel video card and went ahead and manually installed it. but the touchscreen still wasnt working. anyway if you can send me the drivers that would be great. my email is riu825@hotmail.com. also what videocard do you have is it the intel 965?? and is the display driver the same for the touchscreen driver or are they seperate. Thanks a lot man.=)
      My System SpecsSystem Spec

  4. #14


    Posts : 6
    Windows 8 RTM 9200


    Quote Originally Posted by drdumasss View Post
    Quote Originally Posted by CrMo4130 View Post
    Quote Originally Posted by drdumasss View Post
    Hey bud I have the same setup, Windows 8 on my IQ500 series all in one. I installed the drivers and had to manually find the intel 965 drivers for the display but the touch is still not working. Is there anyway you can help me out to try to make the touch work. maybe, if you can send me the drivers for it. It'l be much appreciated. Thanks.
    Installed what drivers? I installed Windows 8, albeit on an IQ505 (your model may be different), and all drivers required were included in Windows. The touch screen worked just fine right after install. It only worked with one touch input though. To get two-point working, I had to install the driver from Next Window. Just last week I was perusing their website to try to see if they had updated their driver, as after installing it, the onscreen keyboard got very very small and was unusable. They no longer have the driver available on their website!!! I don't know why, but I have it stored at home if you'd like it, just send me a PM and I will send it to you!

    Also, if you seem to think your touch screen is always touching in the top-left corner, you can do a hardware calibration by tapping the scroll lock 5 times quickly. You'll hear a beep and your mouse cursor will move. Touch the mouse cursor everywhere it moves until it's finished in the middle. This has saved me a few times when I couldn't get it to work!

    Well all the drivers were preinstalled except the display card driver. i found out the model number of the intel video card and went ahead and manually installed it. but the touchscreen still wasnt working. anyway if you can send me the drivers that would be great. my email is riu825@hotmail.com. also what videocard do you have is it the intel 965?? and is the display driver the same for the touchscreen driver or are they seperate. Thanks a lot man.=)
    Hey bud any luck on sending me those drivers. Im kinda new to forums so i dont know what pm is? Is it just through ms messenger? Anyway i wrote down my email. Very much appreciated.
    Thanks.
      My System SpecsSystem Spec

  5. #15


    Posts : 8
    Windows 8 x64


    Gosh I am SOO SORRY!!! 2 days is a heck of a wait!!! I've sent the drivers, let me know if you've received them!
      My System SpecsSystem Spec

  6. #16


    Posts : 8
    Windows 8 x64


    And yes, I have the 965 video card! I didn't have to install anything though as I had NO yellow exclamation marks in the device manager after bootup of Windows 8 and running all the Windows Updates, etc! Touchscreen driver was the only thing I had to install!
      My System SpecsSystem Spec

  7. #17


    Posts : 8
    Windows 8 x64


    It won't pop up as a video card, by the way. It will a a Human Interface Device (HID), and then NextWindow Multitouch Device should be listed under there!
      My System SpecsSystem Spec

  8. #18


    Posts : 6
    Windows 8 RTM 9200


    Quote Originally Posted by CrMo4130 View Post
    It won't pop up as a video card, by the way. It will a a Human Interface Device (HID), and then NextWindow Multitouch Device should be listed under there!
    alright il check out the HID section but i did not receive tye nextwindow drivers. Try to resend them if you can. Either riu825@hotmail.com or riu825@gmail.com. Either one works.
    Thanks again bud. =)
      My System SpecsSystem Spec

  9. #19


    Posts : 8
    Windows 8 x64


    It was sent to the hotmail address, I also forwarded it to your gmail. Check your spam!!! It was a 3.4MB RAR file!
      My System SpecsSystem Spec

  10. #20


    Posts : 8
    Windows 8 x64


    Got a failure to deliver return, so I found it online! NextWindow - Windows 7 Touch Screen Driver
      My System SpecsSystem Spec

Page 2 of 3 FirstFirst 123 LastLast
Does your PC have a working touch screen with W8CP?
Related Threads
after update touch screen stopped working in Windows Updates & Activation
before I shut down last night I got update then shut down, OK done that, now when I turned on this morning the touch screen does not work......
How to Enable or Disable Touch by Finger on Touch Screen in Windows 7 and Windows 8 This tutorial will show you how to enable or disable touch by finger on a touch screen for only your user account in Windows 7, Windows 8, and Windows 8.1. This does not affect being able to still use a...
Hi can someone help me, as I have installed w8 release preview on my touchsmart tx2 1005AU and touch screen functionality has stopped working altogether :(
Touch Screen Not Working in Drivers & Hardware
My touch screen to my Aspire R7 laptop is no longer working. I got a notification about there not being enough power reaching the USB port, and it stopped working after that. I'm not connected to the internet, so it's not a bad update, but I don't know what the problem is, or how to fix it. When I...
Touch Screen not working! :(( in Drivers & Hardware
Hello. Help me, please :) I have Acer Iconia Tab W500. I install windows 8 retail x86 (buy oem-dvd), but touch screen dont work (in win 8 enterprise (rtm) touch screen works). I install touch screen drivers (EETI) for windows 7, but problem not fixed. Touch screen over dont work (in BIOS his...
Hello. Help me, please :) I have Acer Iconia Tab W500. I install windows 8 retail x86 (buy oem-dvd), but touch screen dont work (in win 8 enterprise (rtm) touch screen works). I install touch screen drivers (EETI) for windows 7, but problem not fixed. Touch screen over dont work (in BIOS his...
Hello. The monitor is installed and the usb is plugged in, so why can't i get the touch function to work? is there anything special i need to do?
Eight Forums Android App Eight Forums IOS App Follow us on Facebook