Hi all,
I have a 3D printer who have to communicatie by Com -> usb converter.
I have drivers from FTDI chip before I have to install the printer software.
In that programm I have to set the com port number.
But I have a problem, I don't see any com in the device manager. I have set a new rule for the envirement variables: DevMgr_Show_NonPresent_Devices on 1 but no result. Also checked "show hidden" in the device manager. There is no new hardware in my Universal Serial Bus controller (should be USB serial convertor) or in other devices (should be USB serial port).
I cannot find anything in my bios to set in on (like integrated periphicals like I saw on the internet)
How can I solve this problem?
Thanks in advance!
I have a 3D printer who have to communicatie by Com -> usb converter.
I have drivers from FTDI chip before I have to install the printer software.
In that programm I have to set the com port number.
But I have a problem, I don't see any com in the device manager. I have set a new rule for the envirement variables: DevMgr_Show_NonPresent_Devices on 1 but no result. Also checked "show hidden" in the device manager. There is no new hardware in my Universal Serial Bus controller (should be USB serial convertor) or in other devices (should be USB serial port).
I cannot find anything in my bios to set in on (like integrated periphicals like I saw on the internet)
How can I solve this problem?
Thanks in advance!
My Computer
System One
-
- OS
- Windows 8 pro x64
- Computer type
- PC/Desktop
- CPU
- 2x Xeon X5680
- Motherboard
- EVGA SR-2
- Memory
- 48 GB Corsair Vengeance
- Graphics Card(s)
- Quadro 5000
- Browser
- Firefox