- Messages
- 52
Hi everyone,
I am copying lots of files from one external hard drive, an old 3.5", to my new WD Passport 1TB with USB 3.0. The first few folders copied but when I checked in hours later, I received the error "The sephamore timeout has expired." My source HD (G: ) seemed to be fine but my destination (F: ) was offline, though it was still plugged in.
I checked event viewer and it turns out I have one of these errors every five seconds that my new hard drive is plugged in. This is the full event:
I am running a chkdsk /r /f on the G drive now. A command of chkntfs on F reported back clean, but I can do a chkdsk on it after since it looks like I should. Is there anything else I can do to repair this?
I am copying lots of files from one external hard drive, an old 3.5", to my new WD Passport 1TB with USB 3.0. The first few folders copied but when I checked in hours later, I received the error "The sephamore timeout has expired." My source HD (G: ) seemed to be fine but my destination (F: ) was offline, though it was still plugged in.
I checked event viewer and it turns out I have one of these errors every five seconds that my new hard drive is plugged in. This is the full event:
Code:
Log Name: System
Source: Microsoft-Windows-Ntfs
Date: 2013-07-03 7:14:48 PM
Event ID: 140
Task Category: None
Level: Warning
Keywords: (8)
User: SYSTEM
Computer: Raj-PC
Description:
The system failed to flush data to the transaction log. Corruption may occur in VolumeId: F:, DeviceName: \Device\HarddiskVolume7.
({Device Timeout}
The specified I/O operation on %hs was not completed before the time-out period expired.)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Ntfs" Guid="{3FF37A1C-A68D-4D6E-8C9B-F79E8B16C482}" />
<EventID>140</EventID>
<Version>0</Version>
<Level>3</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000008</Keywords>
<TimeCreated SystemTime="2013-07-03T23:14:48.340623500Z" />
<EventRecordID>12816</EventRecordID>
<Correlation />
<Execution ProcessID="4" ThreadID="4176" />
<Channel>System</Channel>
<Computer>Raj-PC</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="VolumeId">F:</Data>
<Data Name="DeviceName">\Device\HarddiskVolume7</Data>
<Data Name="Error">0xc00000b5</Data>
</EventData>
</Event>
I am running a chkdsk /r /f on the G drive now. A command of chkntfs on F reported back clean, but I can do a chkdsk on it after since it looks like I should. Is there anything else I can do to repair this?
My Computer
System One
-
- OS
- Windows 8.1 Pro Pack x64
- Computer type
- Laptop
- System Manufacturer/Model
- HP m6-1158ca
- CPU
- Intel i7-3632QM
- Motherboard
- HP 18A5
- Memory
- 2 x 4096 DDR3-SDRAM
- Graphics Card(s)
- Intel HD Graphics 4000 / Radeon HD 7670M
- Sound Card
- IDT High Definition Audio
- Monitor(s) Displays
- 15.6-inch HD BrightView LED-backlit display
- Screen Resolution
- 1366 x 768
- Hard Drives
- Internal: Hitachi 1TB 5400RPM hard drive with HP ProtectSmart
External: WD Passport 1TB with USB 3.0 / Seagate Barracuda 1TB 5400RPM with ULTRA Enclosure / Seagate Momentus 320GB 5400RPM with Sabrent Enclosure
- Cooling
- Cooler Master NotePal X-Slim Ultra-Slim Laptop Cooling Pad with 160mm Fan
- Mouse
- Logitech M560
- Internet Speed
- DSL 25/10
- Browser
- Mozilla Firefox 33.0.2
- Antivirus
- Windows Defender / Malwarebytes Anti-Malware