It usually isn't something related to the crashes, but it is something I needed to know for the
forum rules.
A cracked activation of Windows looks a lot like the genuine Enterprise activation, there are only a few differences.
If you have done anything to try to solve these problems, please let me know what you have tried
I have gone through the event logs to get a little view over all the crashes.
There are a few crashes that are a little specific to a component of the system:
0x24(NTFS_FILE_SYSTEM), hard drive related crash has occured 29 times.
0x119(VIDEO_SCHEDULER_INTERNAL_ERROR), video card related crash has occured 2 times
0x1a(MEMORY_MANAGEMENT), memory related crash has occured 7 times.
0x3B(SYSTEM_SERVICE_EXCEPTION), usually caused by memory passing corrupted data to drivers or drivers passing corrupted data to memory, has occured 59 times
Note
The event goes back to June
In the 6 most recent crashes, McAfee drivers have been flagged a few times.
Please read
https://service.mcafee.com/webcente...df.ctrl-state=eqqxqcpzs_4&articleId=TS101331#! for removing McAfee while troubleshooting
Code:
ffffd000`724710a8 fffff800`4c750ca6Unable to load image \SystemRoot\system32\drivers\mfewfpk.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for mfewfpk.sys
*** ERROR: Module load completed but symbols could not be loaded for mfewfpk.sys
mfewfpk+0xeca6
The Intel network driver has also been flagged a few times.
Please check Intel for updates for the Intel network driver
Driver Reference Table - NETwbw02.sys
Code:
ffffd000`72470ea8 fffff800`4dca91fbUnable to load image \SystemRoot\system32\DRIVERS\NETwbw02.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for NETwbw02.sys
*** ERROR: Module load completed but symbols could not be loaded for NETwbw02.sys
NETwbw02+0x161fb
2: kd> lmvm NETwbw02
start end module name
fffff800`4dc93000 fffff800`4dff2000 NETwbw02 T (no symbols)
Loaded symbol image file: NETwbw02.sys
Image path: \SystemRoot\system32\DRIVERS\NETwbw02.sys
Image name: NETwbw02.sys
Timestamp: [COLOR=#FF0000]Tue Feb 18 17:57:40 2014[/COLOR] (53039104)
CheckSum: 00351370
ImageSize: 0035F000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Please check Intel for driver updates for the Intel Smart Connect driver
Driver Reference Table - INETMON.sys
Code:
*** WARNING: Unable to verify timestamp for INETMON.sys
*** ERROR: Module load completed but symbols could not be loaded for INETMON.sys
1: kd> lmvm INETMON
start end module name
fffff801`eadb1000 fffff801`eadbb000 INETMON T (no symbols)
Loaded symbol image file: INETMON.sys
Image path: \??\C:\Windows\System32\Drivers\INETMON.sys
Image name: INETMON.sys
Timestamp: [COLOR=#ff0000]Thu Apr 03 18:50:43 2014[/COLOR] (533D9163)
CheckSum: 0000FBCE
ImageSize: 0000A000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Please test your hard drive
Diagnostics Test
HDD TEST
Run
SeaTools to check the integrity of your HDD.
SeaTools for DOS and Windows - How to Use - Windows 7 Help Forums
Note
Do not run SeaTools on an SSD as the results will be invalid.
Run
chkdsk
Disk Check - Windows 7 Help Forums
Run
HDTune to
- scan for errors, no quick scan but full scan
- check the health,
- benchmark.
It may take some time, but please take the time you need to perform it properly.
Let me know what the results are
- of the error scan,
- make a screenshot of the health of every hard drive and post the screenshots,
- post screenshots with the benchmark of the
- transfer rate,
- access time,
- burst rate,
- cpu usage.
Run MemTest86+ to analyse your RAM.
MemTest86+ - Test RAM - Windows 7 Forums
Note
MemTest86+ needs to be run for
at least 8 passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for
zero errors here. Even a single error will indicate RAM failure.