hal.dll+37213 BSOD that has haunted me for over a month

Using bluescreenview, I have the four dumps included in the attachment spanning the last month that have the exact same two notes in them: All of the minidumps reference hal.dll+37213 as well as ntoskrnl.exe+1c5f2d as the problem causing the bluescreen. If anyone has any suggestions for what I can do for this, that would be super awesome!

Hi AGgroDahlia1147,

It is a 0x124 WHEA_UNCORRECTABLE_ERROR (Windows Hardware Error Architecture)
This means that you have some hardware damage, unfortunately this error rarely gives enough information for a specific cause.
Fortunately, this error is mostly caused by overclocking or drivers.

STOP 0x124 Troubleshooting

Read carefully before proceeding.

Part One: CPU Stress Test
Part Two: MemTest86+ RAM Diagnostic
Part Three: Hard Drive Diagnostics
Part Four: GPU Stress Test

ONE

CPU TEST

Run Prime95 to stress test your CPU. Prime95 - Stress Test Your CPU - Windows 10 Forums

   Warning

Your CPU temperatures will rise quickly while under this stress test. Keep a keen eye on them and abort the test if overheating occurs.

TWO

RAM TEST

Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums

THREE

HDD TEST

Run SeaTools to check the integrity of your HDD. http://www.sevenforums.com/tutorials/313457-seatools-dos-windows-how-use.html

   Note

Do not run SeaTools on an SSD as the results will be invalid.

Run chkdsk http://www.sevenforums.com/tutorials/433-disk-check.html

FOUR

GPU TEST

Run Furmark to stress test your GPU. FurMark - GPU Stress Test - Windows 10 Forums

   Note

Run Furmark for around 30 minutes.

   Warning

Your GPU temperatures will rise quickly while Furmark is running. Keep a keen eye on them and abort the test if overheating occurs.