Hi Guys,
I'm getting a BSOD when trying to use a programming cable for a PLC.
The cable is basically a usb to serial cable but it requires the PLC manufacturers own drivers. On a windows 7 machine, there is no problem but when using it on my windows 8.1 machine I get a BSOD - UNEXPECTED_KERNEL_MODE_TRAP
The PLC is a Schneider. The drivers for it are located here.
I have also attached a log as per posting rules.
View attachment 60459
I'm getting a BSOD when trying to use a programming cable for a PLC.
The cable is basically a usb to serial cable but it requires the PLC manufacturers own drivers. On a windows 7 machine, there is no problem but when using it on my windows 8.1 machine I get a BSOD - UNEXPECTED_KERNEL_MODE_TRAP
The PLC is a Schneider. The drivers for it are located here.
I have also attached a log as per posting rules.
View attachment 60459
My Computer
System One
-
- OS
- Windows 8.1 with Bing