Solved Fresh install 8.1 random BSOD

morandaminds · Jun 6, 2014

I have a fresh install of Windows 8.1. Everything has been brought up to date including all hardware drivers and bios. I continue to experience the same BSOD every couple of days or so (Attached in this post). This is what else ive tried: Ive unplugged all extra hardware and it still continues to happen. Ive installed a different drive, tested memory (memtest) for 24 hours. Checked the power supply. Ran PC check on the mobo. etc. still continues to happen. Any help would be greatly appreciated. Thanks in advance

A problem has been detected and Windows has been shut down to prevent damage
to your computer.

The problem seems to be caused by the following file: ntoskrnl.exe

If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:

Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.

If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.

Technical Information:

*** STOP: 0x00000139 (0x0000000000000003, 0xffffd0002044cee0, 0xffffd0002044ce38,
0x0000000000000000)

*** ntoskrnl.exe - Address 0xfffff80091157fa0 base at 0xfffff80091004000 DateStamp
0x5318053f

blueelvis · Jun 7, 2014

Hi Morandaminds and welcome to the forums ^_^,

In order to assist you further please follow the instructions found over here :-
http://www.eightforums.com/bsod-cra...e-screen-death-bsod-posting-instructions.html

Although Bugcheck 139 indicates :-

[h=1]KERNEL_SECURITY_CHECK_FAILURE[/h]
The KERNEL_SECURITY_CHECK_FAILURE bug check has a value of 0x00000139. This bug check indicates that the kernel has detected the corruption of a critical data structure.

Most likely, it is a faulty driver. But, we need the DUMP files in order to assist you further.

morandaminds · Jun 13, 2014

Here is the Diagnostic tool files... Hope this helps
Thanks

blueelvis · Jun 16, 2014

Hi morandaminds,

Sorry for the late reply. Below has been provided information of your dump files :-

Code:

**************************Fri Jun 13 04:52:32.810 2014 (UTC + 5:30)**************************Opened log file 'C:\Users\BLUEEL~1\AppData\Local\Temp\SysnativeBSODApps\20164\dmps\outkdOutput1.txt'


Microsoft (R) Windows Debugger Version 6.3.9600.16384 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.




Loading Dump File [C:\SysnativeBSODApps\061214-5703-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available




************* Symbol Path validation summary **************
Response                         Time (ms)     Location
Deferred                                       srv*c:\symbols*http://msdl.microsoft.com/download/symbols
Symbol search path is: srv*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is: 
*** ERROR: Symbol file could not be found.  Defaulted to export symbols for ntkrnlmp.exe - 
Windows 8 Kernel Version 9600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 9600.17041.amd64fre.winblue_gdr.140305-1710
Machine Name:
Kernel base = 0xfffff802`4147f000 PsLoadedModuleList = 0xfffff802`417492d0
Debug session time: Fri Jun 13 04:52:32.810 2014 (UTC + 5:30)
System Uptime: 0 days 13:28:26.501
*** ERROR: Symbol file could not be found.  Defaulted to export symbols for ntkrnlmp.exe - 
Loading Kernel Symbols
.


Press ctrl-c (cdb, kd, ntsd) or ctrl-break (windbg) to abort symbol loads that take too long.
Run !sym noisy before .reload to track down problems loading symbols.


..............................................................
................................................................
.....................
Loading User Symbols
Loading unloaded module list
.......................


************* Symbol Loading Error Summary **************
Module name            Error
ntkrnlmp               The system cannot find the file specified


You can troubleshoot most symbol related issues by turning on symbol loading diagnostics (!sym noisy) and repeating the command that caused symbols to be loaded.
You should also verify that your symbol search path (.sympath) is correct.
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************


Use !analyze -v to get detailed debugging information.


BugCheck 3B, {c0000005, fffff802414a873f, ffffd00021ccfd30, 0}


***** Kernel symbols are WRONG. Please fix symbols to do analysis.


*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!KPRCB                                      ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!KPRCB                                      ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_MMPTE                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_MMPTE                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_MMPTE                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_MMPTE                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
Probably caused by : fileinfo.sys ( fileinfo!FIStreamGetNext+59 )


Followup: MachineOwner
---------


0: kd> !analyze -v; !sysinfo cpuspeed; !sysinfo SMBIOS; lmtsmn; q
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************


SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff802414a873f, Address of the instruction which caused the bugcheck
Arg3: ffffd00021ccfd30, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.


Debugging Details:
------------------


***** Kernel symbols are WRONG. Please fix symbols to do analysis.


*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!KPRCB                                      ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!KPRCB                                      ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_MMPTE                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_MMPTE                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_MMPTE                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_MMPTE                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************


ADDITIONAL_DEBUG_TEXT:  


You can run '.symfix; .reload' to try to fix the symbol path and load symbols.


FAULTING_MODULE: fffff8024147f000 nt


DEBUG_FLR_IMAGE_TIMESTAMP:  53089456


EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.


FAULTING_IP: 
nt!ExAcquireRundownProtection+3
fffff802`414a873f 488b01          mov     rax,qword ptr [rcx]


CONTEXT:  ffffd00021ccfd30 -- (.cxr 0xffffd00021ccfd30;r)
.cxr 0xffffd00021ccfd30;r
rax=0000000000000002 rbx=fffbc0005276c570 rcx=fffbc0005276c580
rdx=0000000000000000 rsi=fffbc0005276c570 rdi=ffffe0000b923d00
rip=fffff802414a873f rsp=ffffd00021cd0768 rbp=ffffe0000b923d80
 r8=ffffc000536436e0  r9=000000000000006a r10=0000000000000069
r11=ffffb00095020654 r12=000000eb0110a040 r13=0000000000509a93
r14=ffffe0000b923d78 r15=000000eb0110a050
iopl=0         nv up ei ng nz na po cy
cs=0010  ss=0018  ds=002b  es=002b  fs=0053  gs=002b             efl=00010287
nt!ExAcquireRundownProtection+0x3:
fffff802`414a873f 488b01          mov     rax,qword ptr [rcx] ds:002b:fffbc000`5276c580=????????????????
Last set context:
rax=0000000000000002 rbx=fffbc0005276c570 rcx=fffbc0005276c580
rdx=0000000000000000 rsi=fffbc0005276c570 rdi=ffffe0000b923d00
rip=fffff802414a873f rsp=ffffd00021cd0768 rbp=ffffe0000b923d80
 r8=ffffc000536436e0  r9=000000000000006a r10=0000000000000069
r11=ffffb00095020654 r12=000000eb0110a040 r13=0000000000509a93
r14=ffffe0000b923d78 r15=000000eb0110a050
iopl=0         nv up ei ng nz na po cy
cs=0010  ss=0018  ds=002b  es=002b  fs=0053  gs=002b             efl=00010287
nt!ExAcquireRundownProtection+0x3:
fffff802`414a873f 488b01          mov     rax,qword ptr [rcx] ds:002b:fffbc000`5276c580=????????????????
.cxr
Resetting default scope


CUSTOMER_CRASH_COUNT:  1


DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT


BUGCHECK_STR:  0x3B


CURRENT_IRQL:  0


ANALYSIS_VERSION: 6.3.9600.16384 (debuggers(dbg).130821-1623) amd64fre


LAST_CONTROL_TRANSFER:  from fffff800f8e686b9 to fffff802414a873f


STACK_TEXT:  
ffffd000`21cd0768 fffff800`f8e686b9 : 00000000`00509a93 ffffc000`536436d0 ffffe000`0b923d60 ffffe000`00000000 : nt!ExAcquireRundownProtection+0x3
ffffd000`21cd0770 fffff800`f8e68fed : 00000000`00000000 ffffd000`21cd0b80 ffffe000`0fd8b7d0 ffffe000`0b923d60 : fileinfo!FIStreamGetNext+0x59
ffffd000`21cd07a0 fffff800`f8e64649 : ffffe000`0fd8b7d0 00000000`002250c8 00000000`002e49cb 00000000`00002b31 : fileinfo!FIIterate+0x20d
ffffd000`21cd0840 fffff802`4187b8f2 : 00000000`00000001 ffffd000`21cd0b80 ffffe000`0fd8b7d0 00000000`00000001 : fileinfo!FIControlDispatch+0xb5
ffffd000`21cd0880 fffff802`4187c1c6 : ffffe000`0c9b2080 00000000`00000004 00000000`00000000 00000000`00000000 : nt!ObReferenceObjectByHandleWithTag+0xe92
ffffd000`21cd0a20 fffff802`415de7b3 : ffffffff`fffffffe ffffe000`0c9b2080 000000eb`7926d838 fffff6fb`7dafffb8 : nt!NtDeviceIoControlFile+0x56
ffffd000`21cd0a90 00007ffe`06eeabfa : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!setjmpex+0x34b3
000000eb`7926d7a8 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x00007ffe`06eeabfa




FOLLOWUP_IP: 
fileinfo!FIStreamGetNext+59
fffff800`f8e686b9 0fb6f8          movzx   edi,al


SYMBOL_STACK_INDEX:  1


SYMBOL_NAME:  fileinfo!FIStreamGetNext+59


FOLLOWUP_NAME:  MachineOwner


MODULE_NAME: fileinfo


IMAGE_NAME:  fileinfo.sys


IMAGE_VERSION:  6.3.9600.17031


STACK_COMMAND:  .cxr 0xffffd00021ccfd30 ; kb


BUCKET_ID:  WRONG_SYMBOLS


FAILURE_BUCKET_ID:  WRONG_SYMBOLS


ANALYSIS_SOURCE:  KM


FAILURE_ID_HASH_STRING:  km:wrong_symbols


FAILURE_ID_HASH:  {70b057e8-2462-896f-28e7-ac72d4d365f8}


Followup: MachineOwner
---------


CPUID:        "Intel(R) Core(TM) i5-4670 CPU @ 3.40GHz"
MaxSpeed:     3400
CurrentSpeed: 3392
[SMBIOS Data Tables v2.7]
[DMI Version - 39]
[2.0 Calling Convention - No]
[Table Size - 3045 bytes]


[BIOS Information (Type 0) - Length 24 - Handle 0000h]
  Vendor                        American Megatrends Inc.
  BIOS Version                  F6
  BIOS Starting Address Segment f000
  BIOS Release Date             01/17/2014
  BIOS ROM Size                 800000
  BIOS Characteristics
       07: - PCI Supported
       11: - Upgradeable FLASH BIOS
       12: - BIOS Shadowing Supported
       15: - CD-Boot Supported
       16: - Selectable Boot Supported
       17: - BIOS ROM Socketed
       19: - EDD Supported
       23: - 1.2MB Floppy Supported
       24: - 720KB Floppy Supported
       25: - 2.88MB Floppy Supported
       26: - Print Screen Device Supported
       27: - Keyboard Services Supported
       28: - Serial Services Supported
       29: - Printer Services Supported
       32: - BIOS Vendor Reserved
  BIOS Characteristic Extensions
       00: - ACPI Supported
       01: - USB Legacy Supported
       08: - BIOS Boot Specification Supported
       10: - Specification Reserved
       11: - Specification Reserved
  BIOS Major Revision           4
  BIOS Minor Revision           6
  EC Firmware Major Revision    255
  EC Firmware Minor Revision    255
[System Information (Type 1) - Length 27 - Handle 0001h]
  Manufacturer                  Gigabyte Technology Co., Ltd.
  Product Name                  H87-D3H
  Version                       To be filled by O.E.M.
  Serial Number                                       
  UUID                          00000000-0000-0000-0000-000000000000
  Wakeup Type                   Power Switch
  SKUNumber                     To be filled by O.E.M.
  Family                        To be filled by O.E.M.
[BaseBoard Information (Type 2) - Length 15 - Handle 0002h]
  Manufacturer                  Gigabyte Technology Co., Ltd.
  Product                       H87-D3H-CF
  Version                       x.x
  Serial Number                                       
  Asset Tag                                           
  Feature Flags                 09h
       -831232224: - (null)
       -831232176: - (null)
  Location                      To be filled by O.E.M.
  Chassis Handle                0003h
  Board Type                    0ah - Processor/Memory Module
  Number of Child Handles       0
[System Enclosure (Type 3) - Length 22 - Handle 0003h]
  Manufacturer                  Gigabyte Technology Co., Ltd.
  Chassis Type                  Desktop
  Version                       To Be Filled By O.E.M.
  Serial Number                                       
  Asset Tag Number                                    
  Bootup State                  Safe
  Power Supply State            Safe
  Thermal State                 Safe
  Security Status               None
  OEM Defined                   0
  Height                        0U
  Number of Power Cords         1
  Number of Contained Elements  0
  Contained Element Size        0
[Cache Information (Type 7) - Length 19 - Handle 0004h]
  Socket Designation            CPU Internal L1
  Cache Configuration           0180h - WB Enabled Int NonSocketed L1
  Maximum Cache Size            0100h - 256K
  Installed Size                0100h - 256K
  Supported SRAM Type           0002h - Unknown 
  Current SRAM Type             0002h - Unknown 
  Cache Speed                   0ns
  Error Correction Type         Multi-Bit ECC
  System Cache Type             Other
  Associativity                 8-way Set-Associative
[Cache Information (Type 7) - Length 19 - Handle 0005h]
  Socket Designation            CPU Internal L2
  Cache Configuration           0181h - WB Enabled Int NonSocketed L2
  Maximum Cache Size            0400h - 1024K
  Installed Size                0400h - 1024K
  Supported SRAM Type           0002h - Unknown 
  Current SRAM Type             0002h - Unknown 
  Cache Speed                   0ns
  Error Correction Type         Multi-Bit ECC
  System Cache Type             Unified
  Associativity                 8-way Set-Associative
[Cache Information (Type 7) - Length 19 - Handle 0006h]
  Socket Designation            CPU Internal L3
  Cache Configuration           0182h - WB Enabled Int NonSocketed L3
  Maximum Cache Size            1800h - 6144K
  Installed Size                1800h - 6144K
  Supported SRAM Type           0002h - Unknown 
  Current SRAM Type             0002h - Unknown 
  Cache Speed                   0ns
  Error Correction Type         Multi-Bit ECC
  System Cache Type             Unified
  Associativity                 Specification Reserved
[Physical Memory Array (Type 16) - Length 23 - Handle 0007h]
  Location                      03h - SystemBoard/Motherboard
  Use                           03h - System Memory
  Memory Error Correction       03h - None
  Maximum Capacity              33554432KB
  Memory Error Inf Handle       [Not Provided]
  Number of Memory Devices      4
[Onboard Devices Information (Type 10) - Length 6 - Handle 0026h]
  Number of Devices             1
  01: Type                      Video [enabled]
  01: Description                  To Be Filled By O.E.M.
[OEM Strings (Type 11) - Length 5 - Handle 0027h]
  Number of Strings             1
   1                            To Be Filled By O.E.M.
[System Configuration Options (Type 12) - Length 5 - Handle 0028h]
[Processor Information (Type 4) - Length 42 - Handle 0041h]
  Socket Designation            SOCKET 0
  Processor Type                Central Processor
  Processor Family              c6h - Specification Reserved
  Processor Manufacturer        Intel
  Processor ID                  c3060300fffbebbf
  Processor Version             Intel(R) Core(TM) i5-4670 CPU @ 3.40GHz
  Processor Voltage             8bh - 1.1V
  External Clock                100MHz
  Max Speed                     7000MHz
  Current Speed                 3600MHz
  Status                        Enabled Populated
  Processor Upgrade             Other
  L1 Cache Handle               0004h
  L2 Cache Handle               0005h
  L3 Cache Handle               0006h
  Serial Number                 [String Not Specified]
  Asset Tag Number                         
  Part Number                   Fill By OEM
[Memory Device (Type 17) - Length 34 - Handle 0042h]
  Physical Memory Array Handle  0007h
  Memory Error Info Handle      [Not Provided]
  Total Width                   0 bits
  Data Width                    0 bits
  Size                          [Not Populated]
  Form Factor                   09h - DIMM
  Device Set                    [None]
  Device Locator                ChannelA-DIMM0
  Bank Locator                  BANK 0
  Memory Type                   02h - Unknown
  Type Detail                   0000h -
  Speed                         0MHz
  Manufacturer                  [Empty]
  Serial Number                        
  Asset Tag Number                        
  Part Number                   [Empty]
[Memory Device (Type 17) - Length 34 - Handle 0043h]
  Physical Memory Array Handle  0007h
  Memory Error Info Handle      [Not Provided]
  Total Width                   64 bits
  Data Width                    64 bits
  Size                          8192MB
  Form Factor                   09h - DIMM
  Device Set                    [None]
  Device Locator                ChannelA-DIMM1
  Bank Locator                  BANK 1
  Memory Type                   18h - Specification Reserved
  Type Detail                   0080h - Synchronous
  Speed                         1600MHz
  Manufacturer                  1315
  Serial Number                         
  Asset Tag Number                        
  Part Number                   BLS8G3D1609DS1S00.
[Memory Device Mapped Address (Type 20) - Length 35 - Handle 0044h]
  Starting Address              00000000h
  Ending Address                007fffffh
  Memory Device Handle          0043h
  Mem Array Mapped Adr Handle   0048h
  Partition Row Position        [Unknown]
  Interleave Position           [Unknown]
  Interleave Data Depth         [Unknown]
[Memory Device (Type 17) - Length 34 - Handle 0045h]
  Physical Memory Array Handle  0007h
  Memory Error Info Handle      [Not Provided]
  Total Width                   0 bits
  Data Width                    0 bits
  Size                          [Not Populated]
  Form Factor                   09h - DIMM
  Device Set                    [None]
  Device Locator                ChannelB-DIMM0
  Bank Locator                  BANK 2
  Memory Type                   02h - Unknown
  Type Detail                   0000h -
  Speed                         0MHz
  Manufacturer                  [Empty]
  Serial Number                        
  Asset Tag Number                        
  Part Number                   [Empty]
[Memory Device (Type 17) - Length 34 - Handle 0046h]
  Physical Memory Array Handle  0007h
  Memory Error Info Handle      [Not Provided]
  Total Width                   64 bits
  Data Width                    64 bits
  Size                          8192MB
  Form Factor                   09h - DIMM
  Device Set                    [None]
  Device Locator                ChannelB-DIMM1
  Bank Locator                  BANK 3
  Memory Type                   18h - Specification Reserved
  Type Detail                   0080h - Synchronous
  Speed                         1600MHz
  Manufacturer                  1315
  Serial Number                         
  Asset Tag Number                        
  Part Number                   BLS8G3D1609DS1S00.
[Memory Device Mapped Address (Type 20) - Length 35 - Handle 0047h]
  Starting Address              00800000h
  Ending Address                00ffffffh
  Memory Device Handle          0046h
  Mem Array Mapped Adr Handle   0048h
  Partition Row Position        [Unknown]
  Interleave Position           [Unknown]
  Interleave Data Depth         [Unknown]
[Memory Array Mapped Address (Type 19) - Length 31 - Handle 0048h]
  Starting Address              00000000h
  Ending Address                00ffffffh
  Memory Array Handle           0007h
  Partition Width               04
start             end                 module name
fffff800`f8b42000 fffff800`f8bcc000   ACPI     ACPI.sys     Sat Feb 22 17:43:57 2014 (53089485)
fffff800`f8b1f000 fffff800`f8b37000   acpiex   acpiex.sys   Thu Aug 22 17:07:47 2013 (5215F80B)
fffff800`f9e00000 fffff800`f9e93000   afd      afd.sys      Thu Aug 22 17:06:50 2013 (5215F7D2)
fffff800`fa236000 fffff800`fa24d000   ahcache  ahcache.sys  Thu Aug 22 17:09:54 2013 (5215F88A)
fffff800`fae6d000 fffff800`fae77000   aswHwid  aswHwid.sys  Tue Apr 08 21:13:26 2014 (5344191E)
fffff800`fa9cc000 fffff800`fa9ee000   aswMonFlt aswMonFlt.sys Thu Apr 17 16:34:01 2014 (534FB521)
fffff800`fa158000 fffff800`fa172000   aswRdr2  aswRdr2.sys  Thu Apr 17 16:32:56 2014 (534FB4E0)
fffff800`f95e9000 fffff800`f95fc000   aswRvrt  aswRvrt.sys  Thu Apr 17 16:34:41 2014 (534FB549)
fffff800`f9ccd000 fffff800`f9dce000   aswSnx   aswSnx.sys   Mon May 05 13:34:42 2014 (5367461A)
fffff800`f9c00000 fffff800`f9c6d000   aswSP    aswSP.sys    Mon May 05 13:41:11 2014 (5367479F)
fffff800`fa4c6000 fffff800`fa4de000   aswStm   aswStm.sys   Mon May 05 13:41:48 2014 (536747C4)
fffff800`f9000000 fffff800`f9035000   aswVmm   aswVmm.sys   Thu Apr 17 16:34:55 2014 (534FB557)
fffff960`00aee000 fffff960`00b4d000   ATMFD    ATMFD.DLL    unavailable (00000000)
fffff800`fa0ac000 fffff800`fa0be000   BasicDisplay BasicDisplay.sys Thu Aug 22 17:09:31 2013 (5215F873)
fffff800`f9c7e000 fffff800`f9c8c000   BasicRender BasicRender.sys Sat Feb 22 17:44:02 2014 (5308948A)
fffff800`f9c76000 fffff800`f9c7e000   Beep     Beep.SYS     Thu Aug 22 17:10:24 2013 (5215F8A8)
fffff800`f8995000 fffff800`f899f000   BOOTVID  BOOTVID.dll  Thu Aug 22 17:10:26 2013 (5215F8AA)
fffff800`faf8a000 fffff800`fafaa000   bowser   bowser.sys   Thu Aug 22 17:08:38 2013 (5215F83E)
fffff960`00993000 fffff960`009ce000   cdd      cdd.dll      unavailable (00000000)
fffff800`f907d000 fffff800`f90ab000   cdrom    cdrom.sys    Thu Aug 22 14:16:35 2013 (5215CFEB)
fffff800`f8800000 fffff800`f8888000   CI       CI.dll       Sat Feb 22 17:42:12 2014 (5308941C)
fffff800`f937c000 fffff800`f93d2000   CLASSPNP CLASSPNP.SYS Sat Mar 08 14:57:06 2014 (531AE26A)
fffff800`f88fd000 fffff800`f895e000   CLFS     CLFS.SYS     Wed Mar 19 13:42:20 2014 (53295164)
fffff800`f8c2f000 fffff800`f8cba000   cng      cng.sys      Sat Mar 08 14:55:08 2014 (531AE1F4)
fffff800`fa24d000 fffff800`fa25c000   CompositeBus CompositeBus.sys Thu Aug 22 17:08:48 2013 (5215F848)
fffff800`fa9ee000 fffff800`fa9fe000   condrv   condrv.sys   Thu Aug 22 17:10:17 2013 (5215F8A1)
fffff800`f9035000 fffff800`f904a000   crashdmp crashdmp.sys Thu Aug 22 17:10:03 2013 (5215F893)
fffff800`fa335000 fffff800`fa3c3000   csc      csc.sys      Thu Aug 22 17:08:00 2013 (5215F818)
fffff800`fa200000 fffff800`fa226000   dfsc     dfsc.sys     Thu Mar 06 14:52:50 2014 (53183E6A)
fffff800`f9360000 fffff800`f937c000   disk     disk.sys     Thu Aug 22 17:09:47 2013 (5215F883)
fffff800`fac47000 fffff800`fac63000   drmk     drmk.sys     Thu Aug 22 17:09:24 2013 (5215F86C)
fffff800`fabc3000 fffff800`fabcf000   dump_diskdump dump_diskdump.sys Thu Aug 22 17:10:18 2013 (5215F8A2)
fffff800`fa48c000 fffff800`fa4a2000   dump_dumpfve dump_dumpfve.sys Sat Feb 22 17:44:48 2014 (530894B8)
fffff800`fabcf000 fffff800`fabec000   dump_storahci dump_storahci.sys Thu Aug 22 17:10:39 2013 (5215F8B7)
fffff800`f9eb8000 fffff800`fa039000   dxgkrnl  dxgkrnl.sys  Thu Mar 06 14:52:58 2014 (53183E72)
fffff800`fa04b000 fffff800`fa0ac000   dxgmms1  dxgmms1.sys  Thu Mar 06 14:52:14 2014 (53183E46)
fffff800`fa400000 fffff800`fa474000   e1i63x64 e1i63x64.sys Wed Mar 20 13:07:29 2013 (51496739)
fffff800`fab8a000 fffff800`fabc3000   fastfat  fastfat.SYS  Thu Aug 22 17:10:18 2013 (5215F8A2)
fffff800`f8e5c000 fffff800`f8e72000   fileinfo fileinfo.sys Sat Feb 22 17:43:10 2014 (53089456)
fffff800`f8e00000 fffff800`f8e5c000   fltmgr   fltmgr.sys   Sat Feb 22 17:45:40 2014 (530894EC)
fffff800`f930f000 fffff800`f931a000   Fs_Rec   Fs_Rec.sys   Thu Aug 22 14:16:33 2013 (5215CFE9)
fffff800`f9600000 fffff800`f9695000   fvevol   fvevol.sys   Sat Feb 22 17:41:54 2014 (5308940A)
fffff800`f9917000 fffff800`f9983000   fwpkclnt fwpkclnt.sys Tue Mar 04 14:58:07 2014 (53159CA7)
fffff800`faa7b000 fffff800`faa81c00   GEARAspiWDM GEARAspiWDM.sys Fri May 04 01:26:17 2012 (4FA2E2E1)
fffff802`4140f000 fffff802`4147f000   hal      hal.dll      Sat Feb 22 17:45:53 2014 (530894F9)
fffff800`fa903000 fffff800`fa91c000   HDAudBus HDAudBus.sys Thu Aug 22 17:08:37 2013 (5215F83D)
fffff800`fad64000 fffff800`fadca000   HdAudio  HdAudio.sys  Thu Aug 22 17:08:19 2013 (5215F82B)
fffff800`facb7000 fffff800`facd6000   HIDCLASS HIDCLASS.SYS Thu Mar 06 14:54:40 2014 (53183ED8)
fffff800`facd6000 fffff800`facddf00   HIDPARSE HIDPARSE.SYS Thu Aug 22 17:10:26 2013 (5215F8AA)
fffff800`faca9000 fffff800`facb7000   hidusb   hidusb.sys   Thu Mar 06 14:54:14 2014 (53183EBE)
fffff800`fae90000 fffff800`faf8a000   HTTP     HTTP.sys     Tue Jan 28 01:18:02 2014 (52E6B7F2)
fffff800`fa4df000 fffff800`fa903000   igdkmd64 igdkmd64.sys Thu Jan 23 04:12:16 2014 (52E04948)
fffff800`f95da000 fffff800`f95e9000   intelpep intelpep.sys Sat Nov 09 14:15:55 2013 (527DF643)
fffff800`faa82000 fffff800`faaa0000   intelppm intelppm.sys Thu Aug 22 14:16:35 2013 (5215CFEB)
fffff800`faafc000 fffff800`fab08000   iwdbus   iwdbus.sys   Wed Dec 18 04:17:38 2013 (52B0D48A)
fffff800`fadca000 fffff800`fadda000   kbdclass kbdclass.sys Thu Aug 22 17:09:23 2013 (5215F86B)
fffff800`facde000 fffff800`facec000   kbdhid   kbdhid.sys   Thu Aug 22 17:09:13 2013 (5215F861)
fffff802`409c2000 fffff802`409cb000   kd       kd.dll       Thu Aug 22 17:10:43 2013 (5215F8BB)
fffff800`fa25c000 fffff800`fa267000   kdnic    kdnic.sys    Thu Aug 22 17:08:26 2013 (5215F832)
fffff800`faaad000 fffff800`faafc000   ks       ks.sys       Sat Feb 22 17:44:40 2014 (530894B0)
fffff800`f92e3000 fffff800`f92ff000   ksecdd   ksecdd.sys   Sat Sep 21 13:29:44 2013 (523D51F0)
fffff800`f9400000 fffff800`f9431000   ksecpkg  ksecpkg.sys  Sat Mar 08 14:54:07 2014 (531AE1B7)
fffff800`fac63000 fffff800`fac68300   ksthunk  ksthunk.sys  Thu Aug 22 17:09:31 2013 (5215F873)
fffff800`fa278000 fffff800`fa28c000   lltdio   lltdio.sys   Thu Aug 22 17:06:18 2013 (5215F7B2)
fffff800`fa4a2000 fffff800`fa4c6000   luafv    luafv.sys    Sat Feb 22 17:44:25 2014 (530894A1)
fffff800`f8889000 fffff800`f88ef000   mcupdate_GenuineIntel mcupdate_GenuineIntel.dll Thu Aug 22 17:10:16 2013 (5215F8A0)
fffff800`fabec000 fffff800`fabfa000   monitor  monitor.sys  Thu Aug 22 17:06:37 2013 (5215F7C5)
fffff800`fade7000 fffff800`fadf7000   mouclass mouclass.sys Thu Aug 22 17:09:13 2013 (5215F861)
fffff800`fadda000 fffff800`fade7000   mouhid   mouhid.sys   Thu Aug 22 17:09:13 2013 (5215F861)
fffff800`f8f32000 fffff800`f8f4d000   mountmgr mountmgr.sys Thu Aug 22 17:10:04 2013 (5215F894)
fffff800`fafaa000 fffff800`fafc1000   mpsdrv   mpsdrv.sys   Thu Aug 22 17:06:06 2013 (5215F7A6)
fffff800`fae00000 fffff800`fae6d000   mrxsmb   mrxsmb.sys   Thu Mar 06 14:50:21 2014 (53183DD5)
fffff800`fb06f000 fffff800`fb0ba000   mrxsmb10 mrxsmb10.sys Thu Mar 06 14:49:36 2014 (53183DA8)
fffff800`fafc1000 fffff800`faffa000   mrxsmb20 mrxsmb20.sys Sat Sep 21 13:27:59 2013 (523D5187)
fffff800`fa0d2000 fffff800`fa0de000   Msfs     Msfs.SYS     Thu Aug 22 17:10:24 2013 (5215F8A8)
fffff800`f8cba000 fffff800`f8cc4000   msisadrv msisadrv.sys Thu Aug 22 17:09:03 2013 (5215F857)
fffff800`fc35b000 fffff800`fc371000   mslldp   mslldp.sys   Thu Aug 22 17:06:07 2013 (5215F7A7)
fffff800`f899f000 fffff800`f89fc000   msrpc    msrpc.sys    Thu Aug 22 17:09:22 2013 (5215F86A)
fffff800`fa3dd000 fffff800`fa3e9000   mssmbios mssmbios.sys Thu Aug 22 17:09:41 2013 (5215F87D)
fffff800`f9431000 fffff800`f9448000   mup      mup.sys      Thu Aug 22 17:10:28 2013 (5215F8AC)
fffff800`f9449000 fffff800`f9561000   ndis     ndis.sys     Sat Feb 22 17:42:58 2014 (5308944A)
fffff800`faaa0000 fffff800`faaab000   NdisVirtualBus NdisVirtualBus.sys Thu Aug 22 17:06:25 2013 (5215F7B9)
fffff800`fb0ba000 fffff800`fb0d7000   Ndu      Ndu.sys      Thu Aug 22 17:05:42 2013 (5215F78E)
fffff800`fa19c000 fffff800`fa1ad000   netbios  netbios.sys  Thu Aug 22 17:08:58 2013 (5215F852)
fffff800`fa10c000 fffff800`fa158000   netbt    netbt.sys    Thu Aug 22 17:07:01 2013 (5215F7DD)
fffff800`f9561000 fffff800`f95da000   NETIO    NETIO.SYS    Thu Aug 22 17:07:08 2013 (5215F7E4)
fffff800`fa0be000 fffff800`fa0d2000   Npfs     Npfs.SYS     Thu Aug 22 17:10:25 2013 (5215F8A9)
fffff800`fa3d1000 fffff800`fa3dd000   npsvctrig npsvctrig.sys Thu Aug 22 17:08:22 2013 (5215F82E)
fffff800`fa3c3000 fffff800`fa3d1000   nsiproxy nsiproxy.sys Thu Aug 22 17:06:34 2013 (5215F7C2)
fffff802`4147f000 fffff802`41c08000   nt       ntkrnlmp.exe Thu Mar 06 10:48:55 2014 (5318053F)
fffff800`f90ed000 fffff800`f92e3000   Ntfs     Ntfs.sys     Wed Mar 19 09:28:52 2014 (532915FC)
fffff800`f9c6d000 fffff800`f9c76000   Null     Null.SYS     Thu Aug 22 17:10:24 2013 (5215F8A8)
fffff800`fa172000 fffff800`fa19c000   pacer    pacer.sys    Thu Aug 22 17:06:06 2013 (5215F7A6)
fffff800`f8d35000 fffff800`f8d4d000   partmgr  partmgr.sys  Thu Aug 22 17:10:20 2013 (5215F8A4)
fffff800`f8cc4000 fffff800`f8d0c000   pci      pci.sys      Sat Feb 22 17:42:41 2014 (53089439)
fffff800`f92ff000 fffff800`f930f000   pcw      pcw.sys      Thu Aug 22 14:16:34 2013 (5215CFEA)
fffff800`f8d19000 fffff800`f8d35000   pdc      pdc.sys      Fri Nov 01 10:28:42 2013 (52733502)
fffff800`fb0d7000 fffff800`fb180000   peauth   peauth.sys   Sat Feb 22 17:39:37 2014 (53089381)
fffff800`fac00000 fffff800`fac47000   portcls  portcls.sys  Sat Feb 22 17:41:25 2014 (530893ED)
fffff800`f8980000 fffff800`f8995000   PSHED    PSHED.dll    Sat Sep 14 19:27:19 2013 (52346B3F)
fffff800`fa2c5000 fffff800`fa335000   rdbss    rdbss.sys    Tue Dec 17 12:51:22 2013 (52AFFB72)
fffff800`fab08000 fffff800`fab13000   rdpbus   rdpbus.sys   Thu Aug 22 17:08:52 2013 (5215F84C)
fffff800`f931a000 fffff800`f9360000   rdyboost rdyboost.sys Sat Feb 22 17:43:40 2014 (53089474)
fffff800`fa28c000 fffff800`fa2a4000   rspndr   rspndr.sys   Thu Aug 22 17:06:34 2013 (5215F7C2)
fffff800`fb180000 fffff800`fb18b000   secdrv   secdrv.SYS   Wed Sep 13 18:48:38 2006 (4508052E)
fffff800`fa9bf000 fffff800`fa9cc000   serenum  serenum.sys  Thu Aug 22 17:10:17 2013 (5215F8A1)
fffff800`fa1ad000 fffff800`fa1c7000   serial   serial.sys   Thu Aug 22 17:10:08 2013 (5215F898)
fffff800`f8d4d000 fffff800`f8dae000   spaceport spaceport.sys Sat Feb 22 17:42:32 2014 (53089430)
fffff800`fc2c3000 fffff800`fc35b000   srv      srv.sys      Sat Oct 05 16:31:15 2013 (524FF17B)
fffff800`fc215000 fffff800`fc2c3000   srv2     srv2.sys     Thu Mar 06 14:52:30 2014 (53183E56)
fffff800`fb18b000 fffff800`fb1ce000   srvnet   srvnet.sys   Thu Mar 06 14:50:29 2014 (53183DDD)
fffff800`f8f4d000 fffff800`f8f6a000   storahci storahci.sys Thu Aug 22 17:10:39 2013 (5215F8B7)
fffff800`f8f6a000 fffff800`f8fc9000   storport storport.sys Sat Feb 22 17:43:42 2014 (53089476)
fffff800`faaab000 fffff800`faaac600   swenum   swenum.sys   Thu Aug 22 17:09:29 2013 (5215F871)
fffff800`f96a2000 fffff800`f9917000   tcpip    tcpip.sys    Tue Mar 04 15:01:29 2014 (53159D71)
fffff800`fb1ce000 fffff800`fb1e0000   tcpipreg tcpipreg.sys Thu Mar 06 14:49:59 2014 (53183DBF)
fffff800`fa0fe000 fffff800`fa10c000   TDI      TDI.SYS      Thu Aug 22 17:09:01 2013 (5215F855)
fffff800`fa0de000 fffff800`fa0fe000   tdx      tdx.sys      Thu Aug 22 17:06:34 2013 (5215F7C2)
fffff800`fa9a3000 fffff800`fa9bf000   TeeDriverx64 TeeDriverx64.sys Thu Sep 05 23:32:18 2013 (5228C72A)
fffff800`f895e000 fffff800`f8980000   tm       tm.sys       Thu Aug 22 17:09:33 2013 (5215F875)
fffff960`00633000 fffff960`0063c000   TSDDD    TSDDD.dll    unavailable (00000000)
fffff800`fc3af000 fffff800`fc3dc000   tunnel   tunnel.sys   Thu Aug 22 17:05:45 2013 (5215F791)
fffff800`fac69000 fffff800`fac7f000   uaspstor uaspstor.sys Thu Aug 22 17:07:58 2013 (5215F816)
fffff800`fa971000 fffff800`fa9a3000   ucx01000 ucx01000.sys Sat Feb 22 17:41:33 2014 (530893F5)
fffff800`fa267000 fffff800`fa278000   umbus    umbus.sys    Thu Aug 22 17:08:59 2013 (5215F853)
fffff800`fc20b000 fffff800`fc215000   umpass   umpass.sys   Thu Aug 22 17:08:58 2013 (5215F852)
fffff800`fac7f000 fffff800`faca9000   usbccgp  usbccgp.sys  Wed Oct 23 13:47:41 2013 (52678625)
fffff800`fab7e000 fffff800`fab8a000   USBD     USBD.SYS     Thu Aug 22 17:10:22 2013 (5215F8A6)
fffff800`fa474000 fffff800`fa48c000   usbehci  usbehci.sys  Thu Aug 22 17:09:15 2013 (5215F863)
fffff800`fab13000 fffff800`fab7e000   usbhub   usbhub.sys   Thu Aug 22 17:08:33 2013 (5215F839)
fffff800`facec000 fffff800`fad64000   UsbHub3  UsbHub3.sys  Sat Mar 08 14:53:48 2014 (531AE1A4)
fffff800`faa0c000 fffff800`faa7b000   USBPORT  USBPORT.SYS  Thu Aug 22 17:09:40 2013 (5215F87C)
fffff800`fa91c000 fffff800`fa971000   USBXHCI  USBXHCI.SYS  Sat Feb 22 17:41:27 2014 (530893EF)
fffff800`f8d0c000 fffff800`f8d19000   vdrvroot vdrvroot.sys Thu Aug 22 17:08:49 2013 (5215F849)
fffff800`f8dae000 fffff800`f8dc3000   volmgr   volmgr.sys   Thu Aug 22 17:09:53 2013 (5215F889)
fffff800`f8ed3000 fffff800`f8f32000   volmgrx  volmgrx.sys  Thu Aug 22 17:10:23 2013 (5215F8A7)
fffff800`f99a8000 fffff800`f99f8000   volsnap  volsnap.sys  Sat Feb 22 17:45:51 2014 (530894F7)
fffff800`fa039000 fffff800`fa04b000   watchdog watchdog.sys Sat Feb 22 17:44:39 2014 (530894AF)
fffff800`f8a3f000 fffff800`f8b0e000   Wdf01000 Wdf01000.sys Thu Aug 22 17:08:56 2013 (5215F850)
fffff800`f8b0e000 fffff800`f8b1f000   WDFLDR   WDFLDR.SYS   Thu Aug 22 17:09:03 2013 (5215F857)
fffff800`f88ef000 fffff800`f88fd000   werkernel werkernel.sys Thu Aug 22 17:10:24 2013 (5215F8A8)
fffff800`f9983000 fffff800`f99a8000   wfplwfs  wfplwfs.sys  Sat Mar 08 14:52:45 2014 (531AE165)
fffff960`00144000 fffff960`0055e000   win32k   win32k.sys   unavailable (00000000)
fffff800`f8bcc000 fffff800`f8bd6000   WMILIB   WMILIB.SYS   Thu Aug 22 17:10:23 2013 (5215F8A7)
fffff800`f8e72000 fffff800`f8e9d000   Wof      Wof.sys      Thu Mar 13 13:57:29 2014 (53216BF1)
fffff800`fc200000 fffff800`fc20b000   WpdUpFltr WpdUpFltr.sys Thu Aug 22 17:08:45 2013 (5215F845)
fffff800`f8b37000 fffff800`f8b42000   WppRecorder WppRecorder.sys Thu Aug 22 17:09:40 2013 (5215F87C)
fffff800`fc3dc000 fffff800`fc3fd000   WudfPf   WudfPf.sys   Thu Aug 22 17:07:21 2013 (5215F7F1)
fffff800`fc371000 fffff800`fc3af000   WUDFRd   WUDFRd.sys   Thu Aug 22 17:06:50 2013 (5215F7D2)


Unloaded modules:
fffff800`fb03f000 fffff800`fb04b000   hiber_storpo
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0000C000
fffff800`fb04b000 fffff800`fb068000   hiber_storah
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0001D000
fffff800`fb1e0000 fffff800`fb1f6000   hiber_dumpfv
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  00016000
fffff800`fc20b000 fffff800`fc215000   umpass.sys
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0000A000
fffff800`fb000000 fffff800`fb00c000   hiber_storpo
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0000C000
fffff800`fb00c000 fffff800`fb029000   hiber_storah
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0001D000
fffff800`fb029000 fffff800`fb03f000   hiber_dumpfv
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  00016000
fffff800`fc20b000 fffff800`fc215000   umpass.sys
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0000A000
fffff800`fb033000 fffff800`fb03f000   hiber_storpo
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0000C000
fffff800`fb03f000 fffff800`fb05c000   hiber_storah
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0001D000
fffff800`fb1e0000 fffff800`fb1f6000   hiber_dumpfv
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  00016000
fffff800`fc20b000 fffff800`fc215000   umpass.sys
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0000A000
fffff800`fb1e0000 fffff800`fb1ec000   hiber_storpo
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0000C000
fffff800`fb000000 fffff800`fb01d000   hiber_storah
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0001D000
fffff800`fb01d000 fffff800`fb033000   hiber_dumpfv
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  00016000
fffff800`fc20b000 fffff800`fc215000   umpass.sys
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0000A000
fffff800`fc371000 fffff800`fc3af000   WUDFRd.sys
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0003E000
fffff800`f9695000 fffff800`f96a1000   dump_storpor
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0000C000
fffff800`f904a000 fffff800`f9067000   dump_storahc
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0001D000
fffff800`f9067000 fffff800`f907d000   dump_dumpfve
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  00016000
fffff800`f8fc9000 fffff800`f8fe3000   EhStorClass.
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0001A000
fffff800`fa226000 fffff800`fa236000   dam.sys 
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  00010000
fffff800`f9695000 fffff800`f96a1000   hwpolicy.sys
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0000C000
quit:
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
**************************Thu Jun 12 15:23:44.314 2014 (UTC + 5:30)**************************


Opened log file 'C:\Users\BLUEEL~1\AppData\Local\Temp\SysnativeBSODApps\20164\dmps\outkdOutput2.txt'


Microsoft (R) Windows Debugger Version 6.3.9600.16384 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.




Loading Dump File [C:\SysnativeBSODApps\061214-5203-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available




************* Symbol Path validation summary **************
Response                         Time (ms)     Location
Deferred                                       srv*c:\symbols*http://msdl.microsoft.com/download/symbols
Symbol search path is: srv*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is: 
*** ERROR: Symbol file could not be found.  Defaulted to export symbols for ntkrnlmp.exe - 
Windows 8 Kernel Version 9600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 9600.17041.amd64fre.winblue_gdr.140305-1710
Machine Name:
Kernel base = 0xfffff803`c9816000 PsLoadedModuleList = 0xfffff803`c9ae02d0
Debug session time: Thu Jun 12 15:23:44.314 2014 (UTC + 5:30)
System Uptime: 1 days 4:46:57.006
*** ERROR: Symbol file could not be found.  Defaulted to export symbols for ntkrnlmp.exe - 
Loading Kernel Symbols
.


Press ctrl-c (cdb, kd, ntsd) or ctrl-break (windbg) to abort symbol loads that take too long.
Run !sym noisy before .reload to track down problems loading symbols.


..............................................................
................................................................
....................
Loading User Symbols
Loading unloaded module list
.....................


************* Symbol Loading Error Summary **************
Module name            Error
ntkrnlmp               The system cannot find the file specified


You can troubleshoot most symbol related issues by turning on symbol loading diagnostics (!sym noisy) and repeating the command that caused symbols to be loaded.
You should also verify that your symbol search path (.sympath) is correct.
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************


Use !analyze -v to get detailed debugging information.


BugCheck 19, {3, ffffe001353ea450, 0, ffffe001353ea450}


***** Kernel symbols are WRONG. Please fix symbols to do analysis.


*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!KPRCB                                      ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!KPRCB                                      ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_MMPTE                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_MMPTE                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
Probably caused by : afd.sys ( afd!AfdReceiveDatagram+4e7 )


Followup: MachineOwner
---------


0: kd> !analyze -v; !sysinfo cpuspeed; !sysinfo SMBIOS; lmtsmn; q
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************


BAD_POOL_HEADER (19)
The pool is already corrupt at the time of the current request.
This may or may not be due to the caller.
The internal pool links must be walked to figure out a possible cause of
the problem, and then special pool applied to the suspect tags or the driver
verifier to a suspect driver.
Arguments:
Arg1: 0000000000000003, the pool freelist is corrupt.
Arg2: ffffe001353ea450, the pool entry being checked.
Arg3: 0000000000000000, the read back flink freelist value (should be the same as 2).
Arg4: ffffe001353ea450, the read back blink freelist value (should be the same as 2).


Debugging Details:
------------------


***** Kernel symbols are WRONG. Please fix symbols to do analysis.


*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!KPRCB                                      ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!KPRCB                                      ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_MMPTE                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_MMPTE                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************


ADDITIONAL_DEBUG_TEXT:  


You can run '.symfix; .reload' to try to fix the symbol path and load symbols.


MODULE_NAME: afd


FAULTING_MODULE: fffff803c9816000 nt


DEBUG_FLR_IMAGE_TIMESTAMP:  5215f7d2


BUGCHECK_STR:  0x19_3


CUSTOMER_CRASH_COUNT:  1


DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT


CURRENT_IRQL:  0


ANALYSIS_VERSION: 6.3.9600.16384 (debuggers(dbg).130821-1623) amd64fre


LAST_CONTROL_TRANSFER:  from fffff803c9aac0df to fffff803c9969fa0


STACK_TEXT:  
ffffd000`34e745b8 fffff803`c9aac0df : 00000000`00000019 00000000`00000003 ffffe001`353ea450 00000000`00000000 : nt!KeBugCheckEx
ffffd000`34e745c0 fffff803`c985c017 : 00000000`00000000 00000000`00000000 00000000`0f100000 00000056`00000000 : nt!ExFreePoolWithTag+0xdff
ffffd000`34e74690 fffff801`ed1a6927 : ffffe001`3294cfb8 ffffe001`32022b20 ffffe001`3294ce10 00000000`00001000 : nt!IoAllocateMdl+0x147
ffffd000`34e746e0 fffff801`ed1a33a6 : ffffe001`3294ce10 00000000`00001000 00000000`0f100000 00000000`00000002 : afd!AfdReceiveDatagram+0x4e7
ffffd000`34e74850 fffff803`c9c128f2 : 00000000`00000000 ffffd000`34e74b80 ffffe001`3294ce10 00000000`00000004 : afd!AfdDispatchDeviceControl+0x66
ffffd000`34e74880 fffff803`c9c131c6 : 7fffffff`ffffffff 0000000c`001f0003 00000000`00000000 00000056`1803bc80 : nt!ObReferenceObjectByHandleWithTag+0xe92
ffffd000`34e74a20 fffff803`c99757b3 : 00000000`00000000 ffffd000`34e74ad8 00000000`00000000 00000000`00000001 : nt!NtDeviceIoControlFile+0x56
ffffd000`34e74a90 00007ffd`4a34abfa : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!setjmpex+0x34b3
00000056`16f6a788 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x00007ffd`4a34abfa




STACK_COMMAND:  kb


FOLLOWUP_IP: 
afd!AfdReceiveDatagram+4e7
fffff801`ed1a6927 4889842480000000 mov     qword ptr [rsp+80h],rax


SYMBOL_STACK_INDEX:  3


SYMBOL_NAME:  afd!AfdReceiveDatagram+4e7


FOLLOWUP_NAME:  MachineOwner


IMAGE_NAME:  afd.sys


IMAGE_VERSION:  6.3.9600.16384


BUCKET_ID:  WRONG_SYMBOLS


FAILURE_BUCKET_ID:  WRONG_SYMBOLS


ANALYSIS_SOURCE:  KM


FAILURE_ID_HASH_STRING:  km:wrong_symbols


FAILURE_ID_HASH:  {70b057e8-2462-896f-28e7-ac72d4d365f8}


Followup: MachineOwner
---------


CPUID:        "Intel(R) Core(TM) i5-4670 CPU @ 3.40GHz"
MaxSpeed:     3400
CurrentSpeed: 3392
[SMBIOS Data Tables v2.7]
[DMI Version - 39]
[2.0 Calling Convention - No]
[Table Size - 3045 bytes]


[BIOS Information (Type 0) - Length 24 - Handle 0000h]
  Vendor                        American Megatrends Inc.
  BIOS Version                  F6
  BIOS Starting Address Segment f000
  BIOS Release Date             01/17/2014
  BIOS ROM Size                 800000
  BIOS Characteristics
       07: - PCI Supported
       11: - Upgradeable FLASH BIOS
       12: - BIOS Shadowing Supported
       15: - CD-Boot Supported
       16: - Selectable Boot Supported
       17: - BIOS ROM Socketed
       19: - EDD Supported
       23: - 1.2MB Floppy Supported
       24: - 720KB Floppy Supported
       25: - 2.88MB Floppy Supported
       26: - Print Screen Device Supported
       27: - Keyboard Services Supported
       28: - Serial Services Supported
       29: - Printer Services Supported
       32: - BIOS Vendor Reserved
  BIOS Characteristic Extensions
       00: - ACPI Supported
       01: - USB Legacy Supported
       08: - BIOS Boot Specification Supported
       10: - Specification Reserved
       11: - Specification Reserved
  BIOS Major Revision           4
  BIOS Minor Revision           6
  EC Firmware Major Revision    255
  EC Firmware Minor Revision    255
[System Information (Type 1) - Length 27 - Handle 0001h]
  Manufacturer                  Gigabyte Technology Co., Ltd.
  Product Name                  H87-D3H
  Version                       To be filled by O.E.M.
  Serial Number                                       
  UUID                          00000000-0000-0000-0000-000000000000
  Wakeup Type                   Power Switch
  SKUNumber                     To be filled by O.E.M.
  Family                        To be filled by O.E.M.
[BaseBoard Information (Type 2) - Length 15 - Handle 0002h]
  Manufacturer                  Gigabyte Technology Co., Ltd.
  Product                       H87-D3H-CF
  Version                       x.x
  Serial Number                                       
  Asset Tag                                           
  Feature Flags                 09h
       -831232224: - (null)
       -831232176: - (null)
  Location                      To be filled by O.E.M.
  Chassis Handle                0003h
  Board Type                    0ah - Processor/Memory Module
  Number of Child Handles       0
[System Enclosure (Type 3) - Length 22 - Handle 0003h]
  Manufacturer                  Gigabyte Technology Co., Ltd.
  Chassis Type                  Desktop
  Version                       To Be Filled By O.E.M.
  Serial Number                                       
  Asset Tag Number                                    
  Bootup State                  Safe
  Power Supply State            Safe
  Thermal State                 Safe
  Security Status               None
  OEM Defined                   0
  Height                        0U
  Number of Power Cords         1
  Number of Contained Elements  0
  Contained Element Size        0
[Cache Information (Type 7) - Length 19 - Handle 0004h]
  Socket Designation            CPU Internal L1
  Cache Configuration           0180h - WB Enabled Int NonSocketed L1
  Maximum Cache Size            0100h - 256K
  Installed Size                0100h - 256K
  Supported SRAM Type           0002h - Unknown 
  Current SRAM Type             0002h - Unknown 
  Cache Speed                   0ns
  Error Correction Type         Multi-Bit ECC
  System Cache Type             Other
  Associativity                 8-way Set-Associative
[Cache Information (Type 7) - Length 19 - Handle 0005h]
  Socket Designation            CPU Internal L2
  Cache Configuration           0181h - WB Enabled Int NonSocketed L2
  Maximum Cache Size            0400h - 1024K
  Installed Size                0400h - 1024K
  Supported SRAM Type           0002h - Unknown 
  Current SRAM Type             0002h - Unknown 
  Cache Speed                   0ns
  Error Correction Type         Multi-Bit ECC
  System Cache Type             Unified
  Associativity                 8-way Set-Associative
[Cache Information (Type 7) - Length 19 - Handle 0006h]
  Socket Designation            CPU Internal L3
  Cache Configuration           0182h - WB Enabled Int NonSocketed L3
  Maximum Cache Size            1800h - 6144K
  Installed Size                1800h - 6144K
  Supported SRAM Type           0002h - Unknown 
  Current SRAM Type             0002h - Unknown 
  Cache Speed                   0ns
  Error Correction Type         Multi-Bit ECC
  System Cache Type             Unified
  Associativity                 Specification Reserved
[Physical Memory Array (Type 16) - Length 23 - Handle 0007h]
  Location                      03h - SystemBoard/Motherboard
  Use                           03h - System Memory
  Memory Error Correction       03h - None
  Maximum Capacity              33554432KB
  Memory Error Inf Handle       [Not Provided]
  Number of Memory Devices      4
[Onboard Devices Information (Type 10) - Length 6 - Handle 0026h]
  Number of Devices             1
  01: Type                      Video [enabled]
  01: Description                  To Be Filled By O.E.M.
[OEM Strings (Type 11) - Length 5 - Handle 0027h]
  Number of Strings             1
   1                            To Be Filled By O.E.M.
[System Configuration Options (Type 12) - Length 5 - Handle 0028h]
[Processor Information (Type 4) - Length 42 - Handle 0041h]
  Socket Designation            SOCKET 0
  Processor Type                Central Processor
  Processor Family              c6h - Specification Reserved
  Processor Manufacturer        Intel
  Processor ID                  c3060300fffbebbf
  Processor Version             Intel(R) Core(TM) i5-4670 CPU @ 3.40GHz
  Processor Voltage             8bh - 1.1V
  External Clock                100MHz
  Max Speed                     7000MHz
  Current Speed                 3600MHz
  Status                        Enabled Populated
  Processor Upgrade             Other
  L1 Cache Handle               0004h
  L2 Cache Handle               0005h
  L3 Cache Handle               0006h
  Serial Number                 [String Not Specified]
  Asset Tag Number                         
  Part Number                   Fill By OEM
[Memory Device (Type 17) - Length 34 - Handle 0042h]
  Physical Memory Array Handle  0007h
  Memory Error Info Handle      [Not Provided]
  Total Width                   0 bits
  Data Width                    0 bits
  Size                          [Not Populated]
  Form Factor                   09h - DIMM
  Device Set                    [None]
  Device Locator                ChannelA-DIMM0
  Bank Locator                  BANK 0
  Memory Type                   02h - Unknown
  Type Detail                   0000h -
  Speed                         0MHz
  Manufacturer                  [Empty]
  Serial Number                        
  Asset Tag Number                        
  Part Number                   [Empty]
[Memory Device (Type 17) - Length 34 - Handle 0043h]
  Physical Memory Array Handle  0007h
  Memory Error Info Handle      [Not Provided]
  Total Width                   64 bits
  Data Width                    64 bits
  Size                          8192MB
  Form Factor                   09h - DIMM
  Device Set                    [None]
  Device Locator                ChannelA-DIMM1
  Bank Locator                  BANK 1
  Memory Type                   18h - Specification Reserved
  Type Detail                   0080h - Synchronous
  Speed                         1600MHz
  Manufacturer                  1315
  Serial Number                         
  Asset Tag Number                        
  Part Number                   BLS8G3D1609DS1S00.
[Memory Device Mapped Address (Type 20) - Length 35 - Handle 0044h]
  Starting Address              00000000h
  Ending Address                007fffffh
  Memory Device Handle          0043h
  Mem Array Mapped Adr Handle   0048h
  Partition Row Position        [Unknown]
  Interleave Position           [Unknown]
  Interleave Data Depth         [Unknown]
[Memory Device (Type 17) - Length 34 - Handle 0045h]
  Physical Memory Array Handle  0007h
  Memory Error Info Handle      [Not Provided]
  Total Width                   0 bits
  Data Width                    0 bits
  Size                          [Not Populated]
  Form Factor                   09h - DIMM
  Device Set                    [None]
  Device Locator                ChannelB-DIMM0
  Bank Locator                  BANK 2
  Memory Type                   02h - Unknown
  Type Detail                   0000h -
  Speed                         0MHz
  Manufacturer                  [Empty]
  Serial Number                        
  Asset Tag Number                        
  Part Number                   [Empty]
[Memory Device (Type 17) - Length 34 - Handle 0046h]
  Physical Memory Array Handle  0007h
  Memory Error Info Handle      [Not Provided]
  Total Width                   64 bits
  Data Width                    64 bits
  Size                          8192MB
  Form Factor                   09h - DIMM
  Device Set                    [None]
  Device Locator                ChannelB-DIMM1
  Bank Locator                  BANK 3
  Memory Type                   18h - Specification Reserved
  Type Detail                   0080h - Synchronous
  Speed                         1600MHz
  Manufacturer                  1315
  Serial Number                         
  Asset Tag Number                        
  Part Number                   BLS8G3D1609DS1S00.
[Memory Device Mapped Address (Type 20) - Length 35 - Handle 0047h]
  Starting Address              00800000h
  Ending Address                00ffffffh
  Memory Device Handle          0046h
  Mem Array Mapped Adr Handle   0048h
  Partition Row Position        [Unknown]
  Interleave Position           [Unknown]
  Interleave Data Depth         [Unknown]
[Memory Array Mapped Address (Type 19) - Length 31 - Handle 0048h]
  Starting Address              00000000h
  Ending Address                00ffffffh
  Memory Array Handle           0007h
  Partition Width               04
start             end                 module name
fffff801`ebb71000 fffff801`ebbfb000   ACPI     ACPI.sys     Sat Feb 22 17:43:57 2014 (53089485)
fffff801`ebb4e000 fffff801`ebb66000   acpiex   acpiex.sys   Thu Aug 22 17:07:47 2013 (5215F80B)
fffff801`ed15e000 fffff801`ed1f1000   afd      afd.sys      Thu Aug 22 17:06:50 2013 (5215F7D2)
fffff801`ed39a000 fffff801`ed3b1000   ahcache  ahcache.sys  Thu Aug 22 17:09:54 2013 (5215F88A)
fffff801`edddc000 fffff801`edde6000   aswHwid  aswHwid.sys  Tue Apr 08 21:13:26 2014 (5344191E)
fffff801`ec0d9000 fffff801`ec0fb000   aswMonFlt aswMonFlt.sys Thu Apr 17 16:34:01 2014 (534FB521)
fffff801`ed144000 fffff801`ed15e000   aswRdr2  aswRdr2.sys  Thu Apr 17 16:32:56 2014 (534FB4E0)
fffff801`ec035000 fffff801`ec048000   aswRvrt  aswRvrt.sys  Thu Apr 17 16:34:41 2014 (534FB549)
fffff801`eccf0000 fffff801`ecdf1000   aswSnx   aswSnx.sys   Mon May 05 13:34:42 2014 (5367461A)
fffff801`ecc00000 fffff801`ecc6d000   aswSP    aswSP.sys    Mon May 05 13:41:11 2014 (5367479F)
fffff801`ec3e2000 fffff801`ec3fa000   aswStm   aswStm.sys   Mon May 05 13:41:48 2014 (536747C4)
fffff801`ec000000 fffff801`ec035000   aswVmm   aswVmm.sys   Thu Apr 17 16:34:55 2014 (534FB557)
fffff960`00b43000 fffff960`00ba2000   ATMFD    ATMFD.DLL    unavailable (00000000)
fffff801`ed098000 fffff801`ed0aa000   BasicDisplay BasicDisplay.sys Thu Aug 22 17:09:31 2013 (5215F873)
fffff801`ecc7e000 fffff801`ecc8c000   BasicRender BasicRender.sys Sat Feb 22 17:44:02 2014 (5308948A)
fffff801`ecc76000 fffff801`ecc7e000   Beep     Beep.SYS     Thu Aug 22 17:10:24 2013 (5215F8A8)
fffff801`eb92c000 fffff801`eb936000   BOOTVID  BOOTVID.dll  Thu Aug 22 17:10:26 2013 (5215F8AA)
fffff801`edcff000 fffff801`edd1f000   bowser   bowser.sys   Thu Aug 22 17:08:38 2013 (5215F83E)
fffff960`00981000 fffff960`009bc000   cdd      cdd.dll      unavailable (00000000)
fffff801`ec087000 fffff801`ec0b5000   cdrom    cdrom.sys    Thu Aug 22 14:16:35 2013 (5215CFEB)
fffff801`eb936000 fffff801`eb9be000   CI       CI.dll       Sat Feb 22 17:42:12 2014 (5308941C)
fffff801`ec38c000 fffff801`ec3e2000   CLASSPNP CLASSPNP.SYS Sat Mar 08 14:57:06 2014 (531AE26A)
fffff801`eb894000 fffff801`eb8f5000   CLFS     CLFS.SYS     Wed Mar 19 13:42:20 2014 (53295164)
fffff801`ebc6c000 fffff801`ebcf7000   cng      cng.sys      Sat Mar 08 14:55:08 2014 (531AE1F4)
fffff801`ed3b1000 fffff801`ed3c0000   CompositeBus CompositeBus.sys Thu Aug 22 17:08:48 2013 (5215F848)
fffff801`ec060000 fffff801`ec070000   condrv   condrv.sys   Thu Aug 22 17:10:17 2013 (5215F8A1)
fffff801`ec5eb000 fffff801`ec600000   crashdmp crashdmp.sys Thu Aug 22 17:10:03 2013 (5215F893)
fffff801`ed2b0000 fffff801`ed33e000   csc      csc.sys      Thu Aug 22 17:08:00 2013 (5215F818)
fffff801`ed364000 fffff801`ed38a000   dfsc     dfsc.sys     Thu Mar 06 14:52:50 2014 (53183E6A)
fffff801`ec370000 fffff801`ec38c000   disk     disk.sys     Thu Aug 22 17:09:47 2013 (5215F883)
fffff801`edba1000 fffff801`edbbd000   drmk     drmk.sys     Thu Aug 22 17:09:24 2013 (5215F86C)
fffff801`ecc9c000 fffff801`ecca8000   dump_diskdump dump_diskdump.sys Thu Aug 22 17:10:18 2013 (5215F8A2)
fffff801`eccc5000 fffff801`eccdb000   dump_dumpfve dump_dumpfve.sys Sat Feb 22 17:44:48 2014 (530894B8)
fffff801`ecca8000 fffff801`eccc5000   dump_storahci dump_storahci.sys Thu Aug 22 17:10:39 2013 (5215F8B7)
fffff801`ecea4000 fffff801`ed025000   dxgkrnl  dxgkrnl.sys  Thu Mar 06 14:52:58 2014 (53183E72)
fffff801`ed037000 fffff801`ed098000   dxgmms1  dxgmms1.sys  Thu Mar 06 14:52:14 2014 (53183E46)
fffff801`ed94f000 fffff801`ed9c3000   e1i63x64 e1i63x64.sys Wed Mar 20 13:07:29 2013 (51496739)
fffff801`ece55000 fffff801`ece8e000   fastfat  fastfat.SYS  Thu Aug 22 17:10:18 2013 (5215F8A2)
fffff801`ebf7b000 fffff801`ebf91000   fileinfo fileinfo.sys Sat Feb 22 17:43:10 2014 (53089456)
fffff801`ebf1f000 fffff801`ebf7b000   fltmgr   fltmgr.sys   Sat Feb 22 17:45:40 2014 (530894EC)
fffff801`ec31f000 fffff801`ec32a000   Fs_Rec   Fs_Rec.sys   Thu Aug 22 14:16:33 2013 (5215CFE9)
fffff801`ec960000 fffff801`ec9f5000   fvevol   fvevol.sys   Sat Feb 22 17:41:54 2014 (5308940A)
fffff801`ec8cf000 fffff801`ec93b000   fwpkclnt fwpkclnt.sys Tue Mar 04 14:58:07 2014 (53159CA7)
fffff801`ed9db000 fffff801`ed9e1c00   GEARAspiWDM GEARAspiWDM.sys Fri May 04 01:26:17 2012 (4FA2E2E1)
fffff803`c9f9f000 fffff803`ca00f000   hal      hal.dll      Sat Feb 22 17:45:53 2014 (530894F9)
fffff801`ed886000 fffff801`ed89f000   HDAudBus HDAudBus.sys Thu Aug 22 17:08:37 2013 (5215F83D)
fffff801`edaf4000 fffff801`edb5a000   HdAudio  HdAudio.sys  Thu Aug 22 17:08:19 2013 (5215F82B)
fffff801`ed3dc000 fffff801`ed3fb000   HIDCLASS HIDCLASS.SYS Thu Mar 06 14:54:40 2014 (53183ED8)
fffff801`edbe7000 fffff801`edbeef00   HIDPARSE HIDPARSE.SYS Thu Aug 22 17:10:26 2013 (5215F8AA)
fffff801`edbd9000 fffff801`edbe7000   hidusb   hidusb.sys   Thu Mar 06 14:54:14 2014 (53183EBE)
fffff801`edc05000 fffff801`edcff000   HTTP     HTTP.sys     Tue Jan 28 01:18:02 2014 (52E6B7F2)
fffff801`ed462000 fffff801`ed886000   igdkmd64 igdkmd64.sys Thu Jan 23 04:12:16 2014 (52E04948)
fffff801`ec448000 fffff801`ec457000   intelpep intelpep.sys Sat Nov 09 14:15:55 2013 (527DF643)
fffff801`ed9e2000 fffff801`eda00000   intelppm intelppm.sys Thu Aug 22 14:16:35 2013 (5215CFEB)
fffff801`ed26f000 fffff801`ed27b000   iwdbus   iwdbus.sys   Wed Dec 18 04:17:38 2013 (52B0D48A)
fffff801`ed38a000 fffff801`ed39a000   kbdclass kbdclass.sys Thu Aug 22 17:09:23 2013 (5215F86B)
fffff801`edbef000 fffff801`edbfd000   kbdhid   kbdhid.sys   Thu Aug 22 17:09:13 2013 (5215F861)
fffff803`c8be6000 fffff803`c8bef000   kd       kd.dll       Thu Aug 22 17:10:43 2013 (5215F8BB)
fffff801`ed3c0000 fffff801`ed3cb000   kdnic    kdnic.sys    Thu Aug 22 17:08:26 2013 (5215F832)
fffff801`ed40d000 fffff801`ed45c000   ks       ks.sys       Sat Feb 22 17:44:40 2014 (530894B0)
fffff801`ec2f3000 fffff801`ec30f000   ksecdd   ksecdd.sys   Sat Sep 21 13:29:44 2013 (523D51F0)
fffff801`ec400000 fffff801`ec431000   ksecpkg  ksecpkg.sys  Sat Mar 08 14:54:07 2014 (531AE1B7)
fffff801`edbbd000 fffff801`edbc2300   ksthunk  ksthunk.sys  Thu Aug 22 17:09:31 2013 (5215F873)
fffff801`eccdb000 fffff801`eccef000   lltdio   lltdio.sys   Thu Aug 22 17:06:18 2013 (5215F7B2)
fffff801`ec0b5000 fffff801`ec0d9000   luafv    luafv.sys    Sat Feb 22 17:44:25 2014 (530894A1)
fffff801`eb820000 fffff801`eb886000   mcupdate_GenuineIntel mcupdate_GenuineIntel.dll Thu Aug 22 17:10:16 2013 (5215F8A0)
fffff801`ed1f1000 fffff801`ed1ff000   monitor  monitor.sys  Thu Aug 22 17:06:37 2013 (5215F7C5)
fffff801`ecc8c000 fffff801`ecc9c000   mouclass mouclass.sys Thu Aug 22 17:09:13 2013 (5215F861)
fffff801`ece8e000 fffff801`ece9b000   mouhid   mouhid.sys   Thu Aug 22 17:09:13 2013 (5215F861)
fffff801`eb9be000 fffff801`eb9d9000   mountmgr mountmgr.sys Thu Aug 22 17:10:04 2013 (5215F894)
fffff801`edd1f000 fffff801`edd36000   mpsdrv   mpsdrv.sys   Thu Aug 22 17:06:06 2013 (5215F7A6)
fffff801`edd36000 fffff801`edda3000   mrxsmb   mrxsmb.sys   Thu Mar 06 14:50:21 2014 (53183DD5)
fffff801`ee06a000 fffff801`ee0b5000   mrxsmb10 mrxsmb10.sys Thu Mar 06 14:49:36 2014 (53183DA8)
fffff801`edda3000 fffff801`edddc000   mrxsmb20 mrxsmb20.sys Sat Sep 21 13:27:59 2013 (523D5187)
fffff801`ed0be000 fffff801`ed0ca000   Msfs     Msfs.SYS     Thu Aug 22 17:10:24 2013 (5215F8A8)
fffff801`ebcf7000 fffff801`ebd01000   msisadrv msisadrv.sys Thu Aug 22 17:09:03 2013 (5215F857)
fffff801`ede98000 fffff801`edeae000   mslldp   mslldp.sys   Thu Aug 22 17:06:07 2013 (5215F7A7)
fffff801`eba11000 fffff801`eba6e000   msrpc    msrpc.sys    Thu Aug 22 17:09:22 2013 (5215F86A)
fffff801`ed358000 fffff801`ed364000   mssmbios mssmbios.sys Thu Aug 22 17:09:41 2013 (5215F87D)
fffff801`ec431000 fffff801`ec448000   mup      mup.sys      Thu Aug 22 17:10:28 2013 (5215F8AC)
fffff801`ec45a000 fffff801`ec572000   ndis     ndis.sys     Sat Feb 22 17:42:58 2014 (5308944A)
fffff801`ed400000 fffff801`ed40b000   NdisVirtualBus NdisVirtualBus.sys Thu Aug 22 17:06:25 2013 (5215F7B9)
fffff801`ee0b5000 fffff801`ee0d2000   Ndu      Ndu.sys      Thu Aug 22 17:05:42 2013 (5215F78E)
fffff801`ece2a000 fffff801`ece3b000   netbios  netbios.sys  Thu Aug 22 17:08:58 2013 (5215F852)
fffff801`ed0f8000 fffff801`ed144000   netbt    netbt.sys    Thu Aug 22 17:07:01 2013 (5215F7DD)
fffff801`ec572000 fffff801`ec5eb000   NETIO    NETIO.SYS    Thu Aug 22 17:07:08 2013 (5215F7E4)
fffff801`ed0aa000 fffff801`ed0be000   Npfs     Npfs.SYS     Thu Aug 22 17:10:25 2013 (5215F8A9)
fffff801`ed34c000 fffff801`ed358000   npsvctrig npsvctrig.sys Thu Aug 22 17:08:22 2013 (5215F82E)
fffff801`ed33e000 fffff801`ed34c000   nsiproxy nsiproxy.sys Thu Aug 22 17:06:34 2013 (5215F7C2)
fffff803`c9816000 fffff803`c9f9f000   nt       ntkrnlmp.exe Thu Mar 06 10:48:55 2014 (5318053F)
fffff801`ec0fd000 fffff801`ec2f3000   Ntfs     Ntfs.sys     Wed Mar 19 09:28:52 2014 (532915FC)
fffff801`ecc6d000 fffff801`ecc76000   Null     Null.SYS     Thu Aug 22 17:10:24 2013 (5215F8A8)
fffff801`ece00000 fffff801`ece2a000   pacer    pacer.sys    Thu Aug 22 17:06:06 2013 (5215F7A6)
fffff801`ebd72000 fffff801`ebd8a000   partmgr  partmgr.sys  Thu Aug 22 17:10:20 2013 (5215F8A4)
fffff801`ebd01000 fffff801`ebd49000   pci      pci.sys      Sat Feb 22 17:42:41 2014 (53089439)
fffff801`ec30f000 fffff801`ec31f000   pcw      pcw.sys      Thu Aug 22 14:16:34 2013 (5215CFEA)
fffff801`ebd56000 fffff801`ebd72000   pdc      pdc.sys      Fri Nov 01 10:28:42 2013 (52733502)
fffff801`ee0d2000 fffff801`ee17b000   peauth   peauth.sys   Sat Feb 22 17:39:37 2014 (53089381)
fffff801`edb5a000 fffff801`edba1000   portcls  portcls.sys  Sat Feb 22 17:41:25 2014 (530893ED)
fffff801`eb917000 fffff801`eb92c000   PSHED    PSHED.dll    Sat Sep 14 19:27:19 2013 (52346B3F)
fffff801`ebe00000 fffff801`ebe70000   rdbss    rdbss.sys    Tue Dec 17 12:51:22 2013 (52AFFB72)
fffff801`ed27b000 fffff801`ed286000   rdpbus   rdpbus.sys   Thu Aug 22 17:08:52 2013 (5215F84C)
fffff801`ec32a000 fffff801`ec370000   rdyboost rdyboost.sys Sat Feb 22 17:43:40 2014 (53089474)
fffff801`ec048000 fffff801`ec060000   rspndr   rspndr.sys   Thu Aug 22 17:06:34 2013 (5215F7C2)
fffff801`ee17b000 fffff801`ee186000   secdrv   secdrv.SYS   Wed Sep 13 18:48:38 2006 (4508052E)
fffff801`ed942000 fffff801`ed94f000   serenum  serenum.sys  Thu Aug 22 17:10:17 2013 (5215F8A1)
fffff801`ece3b000 fffff801`ece55000   serial   serial.sys   Thu Aug 22 17:10:08 2013 (5215F898)
fffff801`ebd8a000 fffff801`ebdeb000   spaceport spaceport.sys Sat Feb 22 17:42:32 2014 (53089430)
fffff801`ede00000 fffff801`ede98000   srv      srv.sys      Sat Oct 05 16:31:15 2013 (524FF17B)
fffff801`edebb000 fffff801`edf69000   srv2     srv2.sys     Thu Mar 06 14:52:30 2014 (53183E56)
fffff801`ee186000 fffff801`ee1c9000   srvnet   srvnet.sys   Thu Mar 06 14:50:29 2014 (53183DDD)
fffff801`eb9d9000 fffff801`eb9f6000   storahci storahci.sys Thu Aug 22 17:10:39 2013 (5215F8B7)
fffff801`ebea6000 fffff801`ebf05000   storport storport.sys Sat Feb 22 17:43:42 2014 (53089476)
fffff801`ed40b000 fffff801`ed40c600   swenum   swenum.sys   Thu Aug 22 17:09:29 2013 (5215F871)
fffff801`ec65a000 fffff801`ec8cf000   tcpip    tcpip.sys    Tue Mar 04 15:01:29 2014 (53159D71)
fffff801`ee1c9000 fffff801`ee1db000   tcpipreg tcpipreg.sys Thu Mar 06 14:49:59 2014 (53183DBF)
fffff801`ed0ea000 fffff801`ed0f8000   TDI      TDI.SYS      Thu Aug 22 17:09:01 2013 (5215F855)
fffff801`ed0ca000 fffff801`ed0ea000   tdx      tdx.sys      Thu Aug 22 17:06:34 2013 (5215F7C2)
fffff801`ed926000 fffff801`ed942000   TeeDriverx64 TeeDriverx64.sys Thu Sep 05 23:32:18 2013 (5228C72A)
fffff801`eb8f5000 fffff801`eb917000   tm       tm.sys       Thu Aug 22 17:09:33 2013 (5215F875)
fffff960`00708000 fffff960`00711000   TSDDD    TSDDD.dll    unavailable (00000000)
fffff801`edfa7000 fffff801`edfd4000   tunnel   tunnel.sys   Thu Aug 22 17:05:45 2013 (5215F791)
fffff801`edbc3000 fffff801`edbd9000   uaspstor uaspstor.sys Thu Aug 22 17:07:58 2013 (5215F816)
fffff801`ed8f4000 fffff801`ed926000   ucx01000 ucx01000.sys Sat Feb 22 17:41:33 2014 (530893F5)
fffff801`ed3cb000 fffff801`ed3dc000   umbus    umbus.sys    Thu Aug 22 17:08:59 2013 (5215F853)
fffff801`ed286000 fffff801`ed2b0000   usbccgp  usbccgp.sys  Wed Oct 23 13:47:41 2013 (52678625)
fffff801`eda70000 fffff801`eda7c000   USBD     USBD.SYS     Thu Aug 22 17:10:22 2013 (5215F8A6)
fffff801`ed9c3000 fffff801`ed9db000   usbehci  usbehci.sys  Thu Aug 22 17:09:15 2013 (5215F863)
fffff801`eda05000 fffff801`eda70000   usbhub   usbhub.sys   Thu Aug 22 17:08:33 2013 (5215F839)
fffff801`eda7c000 fffff801`edaf4000   UsbHub3  UsbHub3.sys  Sat Mar 08 14:53:48 2014 (531AE1A4)
fffff801`ed200000 fffff801`ed26f000   USBPORT  USBPORT.SYS  Thu Aug 22 17:09:40 2013 (5215F87C)
fffff801`ed89f000 fffff801`ed8f4000   USBXHCI  USBXHCI.SYS  Sat Feb 22 17:41:27 2014 (530893EF)
fffff801`ebd49000 fffff801`ebd56000   vdrvroot vdrvroot.sys Thu Aug 22 17:08:49 2013 (5215F849)
fffff801`ebdeb000 fffff801`ebe00000   volmgr   volmgr.sys   Thu Aug 22 17:09:53 2013 (5215F889)
fffff801`ebc00000 fffff801`ebc5f000   volmgrx  volmgrx.sys  Thu Aug 22 17:10:23 2013 (5215F8A7)
fffff801`ec600000 fffff801`ec650000   volsnap  volsnap.sys  Sat Feb 22 17:45:51 2014 (530894F7)
fffff801`ed025000 fffff801`ed037000   watchdog watchdog.sys Sat Feb 22 17:44:39 2014 (530894AF)
fffff801`eba6e000 fffff801`ebb3d000   Wdf01000 Wdf01000.sys Thu Aug 22 17:08:56 2013 (5215F850)
fffff801`ebb3d000 fffff801`ebb4e000   WDFLDR   WDFLDR.SYS   Thu Aug 22 17:09:03 2013 (5215F857)
fffff801`eb886000 fffff801`eb894000   werkernel werkernel.sys Thu Aug 22 17:10:24 2013 (5215F8A8)
fffff801`ec93b000 fffff801`ec960000   wfplwfs  wfplwfs.sys  Sat Mar 08 14:52:45 2014 (531AE165)
fffff960`001c3000 fffff960`005dd000   win32k   win32k.sys   unavailable (00000000)
fffff801`eba00000 fffff801`eba0a000   WMILIB   WMILIB.SYS   Thu Aug 22 17:10:23 2013 (5215F8A7)
fffff801`ebf91000 fffff801`ebfbc000   Wof      Wof.sys      Thu Mar 13 13:57:29 2014 (53216BF1)
fffff801`edff5000 fffff801`ee000000   WpdUpFltr WpdUpFltr.sys Thu Aug 22 17:08:45 2013 (5215F845)
fffff801`ebb66000 fffff801`ebb71000   WppRecorder WppRecorder.sys Thu Aug 22 17:09:40 2013 (5215F87C)
fffff801`edfd4000 fffff801`edff5000   WudfPf   WudfPf.sys   Thu Aug 22 17:07:21 2013 (5215F7F1)
fffff801`edf69000 fffff801`edfa7000   WUDFRd   WUDFRd.sys   Thu Aug 22 17:06:50 2013 (5215F7D2)


Unloaded modules:
fffff801`ee03f000 fffff801`ee04b000   hiber_storpo
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0000C000
fffff801`ee04b000 fffff801`ee068000   hiber_storah
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0001D000
fffff801`ee1db000 fffff801`ee1f1000   hiber_dumpfv
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  00016000
fffff801`edeae000 fffff801`edeb8000   umpass.sys
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0000A000
fffff801`ee000000 fffff801`ee00c000   hiber_storpo
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0000C000
fffff801`ee00c000 fffff801`ee029000   hiber_storah
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0001D000
fffff801`ee029000 fffff801`ee03f000   hiber_dumpfv
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  00016000
fffff801`edeae000 fffff801`edeb8000   umpass.sys
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0000A000
fffff801`ee033000 fffff801`ee059000   USBSTOR.SYS
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  00026000
fffff801`ee1db000 fffff801`ee1f5000   EhStorClass.
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0001A000
fffff801`ee1db000 fffff801`ee1e7000   hiber_storpo
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0000C000
fffff801`ee000000 fffff801`ee01d000   hiber_storah
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0001D000
fffff801`ee01d000 fffff801`ee033000   hiber_dumpfv
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  00016000
fffff801`edeae000 fffff801`edeb8000   umpass.sys
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0000A000
fffff801`edf69000 fffff801`edfa7000   WUDFRd.sys
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0003E000
fffff801`ec048000 fffff801`ec054000   dump_storpor
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0000C000
fffff801`ec054000 fffff801`ec071000   dump_storahc
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0001D000
fffff801`ec071000 fffff801`ec087000   dump_dumpfve
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  00016000
fffff801`ebf05000 fffff801`ebf1f000   EhStorClass.
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0001A000
fffff801`ed38a000 fffff801`ed39a000   dam.sys 
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  00010000
fffff801`ec5eb000 fffff801`ec5f7000   hwpolicy.sys
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0000C000
quit:
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
**************************Wed Jun 11 10:35:43.516 2014 (UTC + 5:30)**************************


Opened log file 'C:\Users\BLUEEL~1\AppData\Local\Temp\SysnativeBSODApps\20164\dmps\outkdOutput3.txt'


Microsoft (R) Windows Debugger Version 6.3.9600.16384 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.




Loading Dump File [C:\SysnativeBSODApps\061014-5703-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available




************* Symbol Path validation summary **************
Response                         Time (ms)     Location
Deferred                                       srv*c:\symbols*http://msdl.microsoft.com/download/symbols
Symbol search path is: srv*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is: 
*** ERROR: Symbol file could not be found.  Defaulted to export symbols for ntkrnlmp.exe - 
Windows 8 Kernel Version 9600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 9600.17041.amd64fre.winblue_gdr.140305-1710
Machine Name:
Kernel base = 0xfffff800`3841a000 PsLoadedModuleList = 0xfffff800`386e42d0
Debug session time: Wed Jun 11 10:35:43.516 2014 (UTC + 5:30)
System Uptime: 0 days 1:06:44.208
*** ERROR: Symbol file could not be found.  Defaulted to export symbols for ntkrnlmp.exe - 
Loading Kernel Symbols
.


Press ctrl-c (cdb, kd, ntsd) or ctrl-break (windbg) to abort symbol loads that take too long.
Run !sym noisy before .reload to track down problems loading symbols.


..............................................................
................................................................
.....................
Loading User Symbols
Loading unloaded module list
...........


************* Symbol Loading Error Summary **************
Module name            Error
ntkrnlmp               The system cannot find the file specified


You can troubleshoot most symbol related issues by turning on symbol loading diagnostics (!sym noisy) and repeating the command that caused symbols to be loaded.
You should also verify that your symbol search path (.sympath) is correct.
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************


Use !analyze -v to get detailed debugging information.


BugCheck 3B, {c0000005, fffff8003844373f, ffffd000203f3d30, 0}


***** Kernel symbols are WRONG. Please fix symbols to do analysis.


*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!KPRCB                                      ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!KPRCB                                      ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_MMPTE                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_MMPTE                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_MMPTE                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_MMPTE                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
Probably caused by : fileinfo.sys ( fileinfo!FIStreamGetNext+59 )


Followup: MachineOwner
---------


2: kd> !analyze -v; !sysinfo cpuspeed; !sysinfo SMBIOS; lmtsmn; q
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************


SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff8003844373f, Address of the instruction which caused the bugcheck
Arg3: ffffd000203f3d30, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.


Debugging Details:
------------------


***** Kernel symbols are WRONG. Please fix symbols to do analysis.


*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!KPRCB                                      ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!KPRCB                                      ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_MMPTE                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_MMPTE                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_MMPTE                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_MMPTE                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************


ADDITIONAL_DEBUG_TEXT:  


You can run '.symfix; .reload' to try to fix the symbol path and load symbols.


FAULTING_MODULE: fffff8003841a000 nt


DEBUG_FLR_IMAGE_TIMESTAMP:  53089456


EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.


FAULTING_IP: 
nt!ExAcquireRundownProtection+3
fffff800`3844373f 488b01          mov     rax,qword ptr [rcx]


CONTEXT:  ffffd000203f3d30 -- (.cxr 0xffffd000203f3d30;r)
.cxr 0xffffd000203f3d30;r
rax=0000000000003500 rbx=0000000001fcf204 rcx=0000000001fcf214
rdx=0000000000000000 rsi=0000000001fcf204 rdi=0000000000000000
rip=fffff8003844373f rsp=ffffd000203f4768 rbp=ffffe000c513e090
 r8=ffffc000b8442830  r9=ffffe000c367a030 r10=ffffc000b8442820
r11=ffffd000203f4710 r12=0000000000000000 r13=0000000000000000
r14=ffffe000c513e088 r15=0000000000000000
iopl=0         nv up ei pl nz na po cy
cs=0010  ss=0018  ds=002b  es=002b  fs=0053  gs=002b             efl=00010207
nt!ExAcquireRundownProtection+0x3:
fffff800`3844373f 488b01          mov     rax,qword ptr [rcx] ds:002b:00000000`01fcf214=????????????????
Last set context:
rax=0000000000003500 rbx=0000000001fcf204 rcx=0000000001fcf214
rdx=0000000000000000 rsi=0000000001fcf204 rdi=0000000000000000
rip=fffff8003844373f rsp=ffffd000203f4768 rbp=ffffe000c513e090
 r8=ffffc000b8442830  r9=ffffe000c367a030 r10=ffffc000b8442820
r11=ffffd000203f4710 r12=0000000000000000 r13=0000000000000000
r14=ffffe000c513e088 r15=0000000000000000
iopl=0         nv up ei pl nz na po cy
cs=0010  ss=0018  ds=002b  es=002b  fs=0053  gs=002b             efl=00010207
nt!ExAcquireRundownProtection+0x3:
fffff800`3844373f 488b01          mov     rax,qword ptr [rcx] ds:002b:00000000`01fcf214=????????????????
.cxr
Resetting default scope


CUSTOMER_CRASH_COUNT:  1


DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT


BUGCHECK_STR:  0x3B


CURRENT_IRQL:  0


ANALYSIS_VERSION: 6.3.9600.16384 (debuggers(dbg).130821-1623) amd64fre


LAST_CONTROL_TRANSFER:  from fffff8013d5646b9 to fffff8003844373f


STACK_TEXT:  
ffffd000`203f4768 fffff801`3d5646b9 : 00000000`00000000 ffffc000`b8442820 ffffe000`c513e070 ffffe000`00000000 : nt!ExAcquireRundownProtection+0x3
ffffd000`203f4770 fffff801`3d564fed : 00000000`c0000023 ffffd000`203f4b80 ffffe000`c9625010 ffffe000`c513e070 : fileinfo!FIStreamGetNext+0x59
ffffd000`203f47a0 fffff801`3d560649 : ffffe000`c9625010 00000000`007d44c0 00000000`00000000 00000000`00000000 : fileinfo!FIIterate+0x20d
ffffd000`203f4840 fffff800`388168f2 : 00000000`00000001 ffffd000`203f4b80 ffffe000`c9625010 00000000`00000001 : fileinfo!FIControlDispatch+0xb5
ffffd000`203f4880 fffff800`388171c6 : ffffe000`c6367880 00000000`00000004 00000000`00000000 00000000`00000000 : nt!ObReferenceObjectByHandleWithTag+0xe92
ffffd000`203f4a20 fffff800`385797b3 : ffffffff`fffffffe ffffe000`c6367880 000000f8`e549d608 fffff6fb`7da01f18 : nt!NtDeviceIoControlFile+0x56
ffffd000`203f4a90 00007ff8`05acabfa : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!setjmpex+0x34b3
000000f8`e549d578 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x00007ff8`05acabfa




FOLLOWUP_IP: 
fileinfo!FIStreamGetNext+59
fffff801`3d5646b9 0fb6f8          movzx   edi,al


SYMBOL_STACK_INDEX:  1


SYMBOL_NAME:  fileinfo!FIStreamGetNext+59


FOLLOWUP_NAME:  MachineOwner


MODULE_NAME: fileinfo


IMAGE_NAME:  fileinfo.sys


IMAGE_VERSION:  6.3.9600.17031


STACK_COMMAND:  .cxr 0xffffd000203f3d30 ; kb


BUCKET_ID:  WRONG_SYMBOLS


FAILURE_BUCKET_ID:  WRONG_SYMBOLS


ANALYSIS_SOURCE:  KM


FAILURE_ID_HASH_STRING:  km:wrong_symbols


FAILURE_ID_HASH:  {70b057e8-2462-896f-28e7-ac72d4d365f8}


Followup: MachineOwner
---------


CPUID:        "Intel(R) Core(TM) i5-4670 CPU @ 3.40GHz"
MaxSpeed:     3400
CurrentSpeed: 3392
[SMBIOS Data Tables v2.7]
[DMI Version - 39]
[2.0 Calling Convention - No]
[Table Size - 3045 bytes]


[BIOS Information (Type 0) - Length 24 - Handle 0000h]
  Vendor                        American Megatrends Inc.
  BIOS Version                  F6
  BIOS Starting Address Segment f000
  BIOS Release Date             01/17/2014
  BIOS ROM Size                 800000
  BIOS Characteristics
       07: - PCI Supported
       11: - Upgradeable FLASH BIOS
       12: - BIOS Shadowing Supported
       15: - CD-Boot Supported
       16: - Selectable Boot Supported
       17: - BIOS ROM Socketed
       19: - EDD Supported
       23: - 1.2MB Floppy Supported
       24: - 720KB Floppy Supported
       25: - 2.88MB Floppy Supported
       26: - Print Screen Device Supported
       27: - Keyboard Services Supported
       28: - Serial Services Supported
       29: - Printer Services Supported
       32: - BIOS Vendor Reserved
  BIOS Characteristic Extensions
       00: - ACPI Supported
       01: - USB Legacy Supported
       08: - BIOS Boot Specification Supported
       10: - Specification Reserved
       11: - Specification Reserved
  BIOS Major Revision           4
  BIOS Minor Revision           6
  EC Firmware Major Revision    255
  EC Firmware Minor Revision    255
[System Information (Type 1) - Length 27 - Handle 0001h]
  Manufacturer                  Gigabyte Technology Co., Ltd.
  Product Name                  H87-D3H
  Version                       To be filled by O.E.M.
  Serial Number                                       
  UUID                          00000000-0000-0000-0000-000000000000
  Wakeup Type                   Power Switch
  SKUNumber                     To be filled by O.E.M.
  Family                        To be filled by O.E.M.
[BaseBoard Information (Type 2) - Length 15 - Handle 0002h]
  Manufacturer                  Gigabyte Technology Co., Ltd.
  Product                       H87-D3H-CF
  Version                       x.x
  Serial Number                                       
  Asset Tag                                           
  Feature Flags                 09h
       -831232224: - (null)
       -831232176: - (null)
  Location                      To be filled by O.E.M.
  Chassis Handle                0003h
  Board Type                    0ah - Processor/Memory Module
  Number of Child Handles       0
[System Enclosure (Type 3) - Length 22 - Handle 0003h]
  Manufacturer                  Gigabyte Technology Co., Ltd.
  Chassis Type                  Desktop
  Version                       To Be Filled By O.E.M.
  Serial Number                                       
  Asset Tag Number                                    
  Bootup State                  Safe
  Power Supply State            Safe
  Thermal State                 Safe
  Security Status               None
  OEM Defined                   0
  Height                        0U
  Number of Power Cords         1
  Number of Contained Elements  0
  Contained Element Size        0
[Cache Information (Type 7) - Length 19 - Handle 0004h]
  Socket Designation            CPU Internal L1
  Cache Configuration           0180h - WB Enabled Int NonSocketed L1
  Maximum Cache Size            0100h - 256K
  Installed Size                0100h - 256K
  Supported SRAM Type           0002h - Unknown 
  Current SRAM Type             0002h - Unknown 
  Cache Speed                   0ns
  Error Correction Type         Multi-Bit ECC
  System Cache Type             Other
  Associativity                 8-way Set-Associative
[Cache Information (Type 7) - Length 19 - Handle 0005h]
  Socket Designation            CPU Internal L2
  Cache Configuration           0181h - WB Enabled Int NonSocketed L2
  Maximum Cache Size            0400h - 1024K
  Installed Size                0400h - 1024K
  Supported SRAM Type           0002h - Unknown 
  Current SRAM Type             0002h - Unknown 
  Cache Speed                   0ns
  Error Correction Type         Multi-Bit ECC
  System Cache Type             Unified
  Associativity                 8-way Set-Associative
[Cache Information (Type 7) - Length 19 - Handle 0006h]
  Socket Designation            CPU Internal L3
  Cache Configuration           0182h - WB Enabled Int NonSocketed L3
  Maximum Cache Size            1800h - 6144K
  Installed Size                1800h - 6144K
  Supported SRAM Type           0002h - Unknown 
  Current SRAM Type             0002h - Unknown 
  Cache Speed                   0ns
  Error Correction Type         Multi-Bit ECC
  System Cache Type             Unified
  Associativity                 Specification Reserved
[Physical Memory Array (Type 16) - Length 23 - Handle 0007h]
  Location                      03h - SystemBoard/Motherboard
  Use                           03h - System Memory
  Memory Error Correction       03h - None
  Maximum Capacity              33554432KB
  Memory Error Inf Handle       [Not Provided]
  Number of Memory Devices      4
[Onboard Devices Information (Type 10) - Length 6 - Handle 0026h]
  Number of Devices             1
  01: Type                      Video [enabled]
  01: Description                  To Be Filled By O.E.M.
[OEM Strings (Type 11) - Length 5 - Handle 0027h]
  Number of Strings             1
   1                            To Be Filled By O.E.M.
[System Configuration Options (Type 12) - Length 5 - Handle 0028h]
[Processor Information (Type 4) - Length 42 - Handle 0041h]
  Socket Designation            SOCKET 0
  Processor Type                Central Processor
  Processor Family              c6h - Specification Reserved
  Processor Manufacturer        Intel
  Processor ID                  c3060300fffbebbf
  Processor Version             Intel(R) Core(TM) i5-4670 CPU @ 3.40GHz
  Processor Voltage             8bh - 1.1V
  External Clock                100MHz
  Max Speed                     7000MHz
  Current Speed                 3600MHz
  Status                        Enabled Populated
  Processor Upgrade             Other
  L1 Cache Handle               0004h
  L2 Cache Handle               0005h
  L3 Cache Handle               0006h
  Serial Number                 [String Not Specified]
  Asset Tag Number                         
  Part Number                   Fill By OEM
[Memory Device (Type 17) - Length 34 - Handle 0042h]
  Physical Memory Array Handle  0007h
  Memory Error Info Handle      [Not Provided]
  Total Width                   0 bits
  Data Width                    0 bits
  Size                          [Not Populated]
  Form Factor                   09h - DIMM
  Device Set                    [None]
  Device Locator                ChannelA-DIMM0
  Bank Locator                  BANK 0
  Memory Type                   02h - Unknown
  Type Detail                   0000h -
  Speed                         0MHz
  Manufacturer                  [Empty]
  Serial Number                        
  Asset Tag Number                        
  Part Number                   [Empty]
[Memory Device (Type 17) - Length 34 - Handle 0043h]
  Physical Memory Array Handle  0007h
  Memory Error Info Handle      [Not Provided]
  Total Width                   64 bits
  Data Width                    64 bits
  Size                          8192MB
  Form Factor                   09h - DIMM
  Device Set                    [None]
  Device Locator                ChannelA-DIMM1
  Bank Locator                  BANK 1
  Memory Type                   18h - Specification Reserved
  Type Detail                   0080h - Synchronous
  Speed                         1600MHz
  Manufacturer                  1315
  Serial Number                         
  Asset Tag Number                        
  Part Number                   BLS8G3D1609DS1S00.
[Memory Device Mapped Address (Type 20) - Length 35 - Handle 0044h]
  Starting Address              00000000h
  Ending Address                007fffffh
  Memory Device Handle          0043h
  Mem Array Mapped Adr Handle   0048h
  Partition Row Position        [Unknown]
  Interleave Position           [Unknown]
  Interleave Data Depth         [Unknown]
[Memory Device (Type 17) - Length 34 - Handle 0045h]
  Physical Memory Array Handle  0007h
  Memory Error Info Handle      [Not Provided]
  Total Width                   0 bits
  Data Width                    0 bits
  Size                          [Not Populated]
  Form Factor                   09h - DIMM
  Device Set                    [None]
  Device Locator                ChannelB-DIMM0
  Bank Locator                  BANK 2
  Memory Type                   02h - Unknown
  Type Detail                   0000h -
  Speed                         0MHz
  Manufacturer                  [Empty]
  Serial Number                        
  Asset Tag Number                        
  Part Number                   [Empty]
[Memory Device (Type 17) - Length 34 - Handle 0046h]
  Physical Memory Array Handle  0007h
  Memory Error Info Handle      [Not Provided]
  Total Width                   64 bits
  Data Width                    64 bits
  Size                          8192MB
  Form Factor                   09h - DIMM
  Device Set                    [None]
  Device Locator                ChannelB-DIMM1
  Bank Locator                  BANK 3
  Memory Type                   18h - Specification Reserved
  Type Detail                   0080h - Synchronous
  Speed                         1600MHz
  Manufacturer                  1315
  Serial Number                         
  Asset Tag Number                        
  Part Number                   BLS8G3D1609DS1S00.
[Memory Device Mapped Address (Type 20) - Length 35 - Handle 0047h]
  Starting Address              00800000h
  Ending Address                00ffffffh
  Memory Device Handle          0046h
  Mem Array Mapped Adr Handle   0048h
  Partition Row Position        [Unknown]
  Interleave Position           [Unknown]
  Interleave Data Depth         [Unknown]
[Memory Array Mapped Address (Type 19) - Length 31 - Handle 0048h]
  Starting Address              00000000h
  Ending Address                00ffffffh
  Memory Array Handle           0007h
  Partition Width               04
start             end                 module name
fffff801`3d245000 fffff801`3d2cf000   ACPI     ACPI.sys     Sat Feb 22 17:43:57 2014 (53089485)
fffff801`3d011000 fffff801`3d029000   acpiex   acpiex.sys   Thu Aug 22 17:07:47 2013 (5215F80B)
fffff801`3d90a000 fffff801`3d99d000   afd      afd.sys      Thu Aug 22 17:06:50 2013 (5215F7D2)
fffff801`3e944000 fffff801`3e95b000   ahcache  ahcache.sys  Thu Aug 22 17:09:54 2013 (5215F88A)
fffff801`3f3d9000 fffff801`3f3e3000   aswHwid  aswHwid.sys  Tue Apr 08 21:13:26 2014 (5344191E)
fffff801`3d9db000 fffff801`3d9fd000   aswMonFlt aswMonFlt.sys Thu Apr 17 16:34:01 2014 (534FB521)
fffff801`3e5dd000 fffff801`3e5f7000   aswRdr2  aswRdr2.sys  Thu Apr 17 16:32:56 2014 (534FB4E0)
fffff801`3e1ed000 fffff801`3e200000   aswRvrt  aswRvrt.sys  Thu Apr 17 16:34:41 2014 (534FB549)
fffff801`3e4dc000 fffff801`3e5dd000   aswSnx   aswSnx.sys   Mon May 05 13:34:42 2014 (5367461A)
fffff801`3e400000 fffff801`3e46d000   aswSP    aswSP.sys    Mon May 05 13:41:11 2014 (5367479F)
fffff801`3d599000 fffff801`3d5b1000   aswStm   aswStm.sys   Mon May 05 13:41:48 2014 (536747C4)
fffff801`3dd96000 fffff801`3ddcb000   aswVmm   aswVmm.sys   Thu Apr 17 16:34:55 2014 (534FB557)
fffff960`00a61000 fffff960`00ac0000   ATMFD    ATMFD.DLL    unavailable (00000000)
fffff801`3e600000 fffff801`3e612000   BasicDisplay BasicDisplay.sys Thu Aug 22 17:09:31 2013 (5215F873)
fffff801`3e47e000 fffff801`3e48c000   BasicRender BasicRender.sys Sat Feb 22 17:44:02 2014 (5308948A)
fffff801`3e476000 fffff801`3e47e000   Beep     Beep.SYS     Thu Aug 22 17:10:24 2013 (5215F8A8)
fffff801`3cf81000 fffff801`3cf8b000   BOOTVID  BOOTVID.dll  Thu Aug 22 17:10:26 2013 (5215F8AA)
fffff801`3f3a2000 fffff801`3f3c2000   bowser   bowser.sys   Thu Aug 22 17:08:38 2013 (5215F83E)
fffff960`0098d000 fffff960`009c8000   cdd      cdd.dll      unavailable (00000000)
fffff801`3da16000 fffff801`3da44000   cdrom    cdrom.sys    Thu Aug 22 14:16:35 2013 (5215CFEB)
fffff801`3d046000 fffff801`3d0ce000   CI       CI.dll       Sat Feb 22 17:42:12 2014 (5308941C)
fffff801`3dd40000 fffff801`3dd96000   CLASSPNP CLASSPNP.SYS Sat Mar 08 14:57:06 2014 (531AE26A)
fffff801`3cee9000 fffff801`3cf4a000   CLFS     CLFS.SYS     Wed Mar 19 13:42:20 2014 (53295164)
fffff801`3d2d9000 fffff801`3d364000   cng      cng.sys      Sat Mar 08 14:55:08 2014 (531AE1F4)
fffff801`3e95b000 fffff801`3e96a000   CompositeBus CompositeBus.sys Thu Aug 22 17:08:48 2013 (5215F848)
fffff801`3d5dd000 fffff801`3d5ed000   condrv   condrv.sys   Thu Aug 22 17:10:17 2013 (5215F8A1)
fffff801`3ddcb000 fffff801`3dde0000   crashdmp crashdmp.sys Thu Aug 22 17:10:03 2013 (5215F893)
fffff801`3e85a000 fffff801`3e8e8000   csc      csc.sys      Thu Aug 22 17:08:00 2013 (5215F818)
fffff801`3e90e000 fffff801`3e934000   dfsc     dfsc.sys     Thu Mar 06 14:52:50 2014 (53183E6A)
fffff801`3e1d1000 fffff801`3e1ed000   disk     disk.sys     Thu Aug 22 17:09:47 2013 (5215F883)
fffff801`3f18a000 fffff801`3f1a6000   drmk     drmk.sys     Thu Aug 22 17:09:24 2013 (5215F86C)
fffff801`3e934000 fffff801`3e940000   dump_diskdump dump_diskdump.sys Thu Aug 22 17:10:18 2013 (5215F8A2)
fffff801`3da00000 fffff801`3da16000   dump_dumpfve dump_dumpfve.sys Sat Feb 22 17:44:48 2014 (530894B8)
fffff801`3dde0000 fffff801`3ddfd000   dump_storahci dump_storahci.sys Thu Aug 22 17:10:39 2013 (5215F8B7)
fffff801`3e65d000 fffff801`3e7de000   dxgkrnl  dxgkrnl.sys  Thu Mar 06 14:52:58 2014 (53183E72)
fffff801`3da44000 fffff801`3daa5000   dxgmms1  dxgmms1.sys  Thu Mar 06 14:52:14 2014 (53183E46)
fffff801`3ef7e000 fffff801`3eff2000   e1i63x64 e1i63x64.sys Wed Mar 20 13:07:29 2013 (51496739)
fffff801`3e817000 fffff801`3e850000   fastfat  fastfat.SYS  Thu Aug 22 17:10:18 2013 (5215F8A2)
fffff801`3d558000 fffff801`3d56e000   fileinfo fileinfo.sys Sat Feb 22 17:43:10 2014 (53089456)
fffff801`3d4fc000 fffff801`3d558000   fltmgr   fltmgr.sys   Sat Feb 22 17:45:40 2014 (530894EC)
fffff801`3d8ff000 fffff801`3d90a000   Fs_Rec   Fs_Rec.sys   Thu Aug 22 14:16:33 2013 (5215CFE9)
fffff801`3dcab000 fffff801`3dd40000   fvevol   fvevol.sys   Sat Feb 22 17:41:54 2014 (5308940A)
fffff801`3e0f0000 fffff801`3e15c000   fwpkclnt fwpkclnt.sys Tue Mar 04 14:58:07 2014 (53159CA7)
fffff801`3ea87000 fffff801`3ea8dc00   GEARAspiWDM GEARAspiWDM.sys Fri May 04 01:26:17 2012 (4FA2E2E1)
fffff800`38ba3000 fffff800`38c13000   hal      hal.dll      Sat Feb 22 17:45:53 2014 (530894F9)
fffff801`3eeb5000 fffff801`3eece000   HDAudBus HDAudBus.sys Thu Aug 22 17:08:37 2013 (5215F83D)
fffff801`3f0dd000 fffff801`3f143000   HdAudio  HdAudio.sys  Thu Aug 22 17:08:19 2013 (5215F82B)
fffff801`3f000000 fffff801`3f01f000   HIDCLASS HIDCLASS.SYS Thu Mar 06 14:54:40 2014 (53183ED8)
fffff801`3f01f000 fffff801`3f026f00   HIDPARSE HIDPARSE.SYS Thu Aug 22 17:10:26 2013 (5215F8AA)
fffff801`3f1ec000 fffff801`3f1fa000   hidusb   hidusb.sys   Thu Mar 06 14:54:14 2014 (53183EBE)
fffff801`3f2a8000 fffff801`3f3a2000   HTTP     HTTP.sys     Tue Jan 28 01:18:02 2014 (52E6B7F2)
fffff801`3ea91000 fffff801`3eeb5000   igdkmd64 igdkmd64.sys Thu Jan 23 04:12:16 2014 (52E04948)
fffff801`3de5d000 fffff801`3de6c000   intelpep intelpep.sys Sat Nov 09 14:15:55 2013 (527DF643)
fffff801`3e986000 fffff801`3e9a4000   intelppm intelppm.sys Thu Aug 22 14:16:35 2013 (5215CFEB)
fffff801`3e9f3000 fffff801`3e9ff000   iwdbus   iwdbus.sys   Wed Dec 18 04:17:38 2013 (52B0D48A)
fffff801`3f035000 fffff801`3f045000   kbdclass kbdclass.sys Thu Aug 22 17:09:23 2013 (5215F86B)
fffff801`3f027000 fffff801`3f035000   kbdhid   kbdhid.sys   Thu Aug 22 17:09:13 2013 (5215F861)
fffff800`3783a000 fffff800`37843000   kd       kd.dll       Thu Aug 22 17:10:43 2013 (5215F8BB)
fffff801`3e96a000 fffff801`3e975000   kdnic    kdnic.sys    Thu Aug 22 17:08:26 2013 (5215F832)
fffff801`3e9a4000 fffff801`3e9f3000   ks       ks.sys       Sat Feb 22 17:44:40 2014 (530894B0)
fffff801`3d8d3000 fffff801`3d8ef000   ksecdd   ksecdd.sys   Sat Sep 21 13:29:44 2013 (523D51F0)
fffff801`3dc7a000 fffff801`3dcab000   ksecpkg  ksecpkg.sys  Sat Mar 08 14:54:07 2014 (531AE1B7)
fffff801`3f1a6000 fffff801`3f1ab300   ksthunk  ksthunk.sys  Thu Aug 22 17:09:31 2013 (5215F873)
fffff801`3d5b1000 fffff801`3d5c5000   lltdio   lltdio.sys   Thu Aug 22 17:06:18 2013 (5215F7B2)
fffff801`3d9b7000 fffff801`3d9db000   luafv    luafv.sys    Sat Feb 22 17:44:25 2014 (530894A1)
fffff801`3ce75000 fffff801`3cedb000   mcupdate_GenuineIntel mcupdate_GenuineIntel.dll Thu Aug 22 17:10:16 2013 (5215F8A0)
fffff801`3de6c000 fffff801`3de7a000   monitor  monitor.sys  Thu Aug 22 17:06:37 2013 (5215F7C5)
fffff801`3f052000 fffff801`3f062000   mouclass mouclass.sys Thu Aug 22 17:09:13 2013 (5215F861)
fffff801`3f045000 fffff801`3f052000   mouhid   mouhid.sys   Thu Aug 22 17:09:13 2013 (5215F861)
fffff801`3d215000 fffff801`3d230000   mountmgr mountmgr.sys Thu Aug 22 17:10:04 2013 (5215F894)
fffff801`3f3c2000 fffff801`3f3d9000   mpsdrv   mpsdrv.sys   Thu Aug 22 17:06:06 2013 (5215F7A6)
fffff801`3f200000 fffff801`3f26d000   mrxsmb   mrxsmb.sys   Thu Mar 06 14:50:21 2014 (53183DD5)
fffff801`3d400000 fffff801`3d44b000   mrxsmb10 mrxsmb10.sys Thu Mar 06 14:49:36 2014 (53183DA8)
fffff801`3f26d000 fffff801`3f2a6000   mrxsmb20 mrxsmb20.sys Sat Sep 21 13:27:59 2013 (523D5187)
fffff801`3e626000 fffff801`3e632000   Msfs     Msfs.SYS     Thu Aug 22 17:10:24 2013 (5215F8A8)
fffff801`3d364000 fffff801`3d36e000   msisadrv msisadrv.sys Thu Aug 22 17:09:03 2013 (5215F857)
fffff801`408f5000 fffff801`4090b000   mslldp   mslldp.sys   Thu Aug 22 17:06:07 2013 (5215F7A7)
fffff801`3d0ce000 fffff801`3d12b000   msrpc    msrpc.sys    Thu Aug 22 17:09:22 2013 (5215F86A)
fffff801`3e902000 fffff801`3e90e000   mssmbios mssmbios.sys Thu Aug 22 17:09:41 2013 (5215F87D)
fffff801`3de46000 fffff801`3de5d000   mup      mup.sys      Thu Aug 22 17:10:28 2013 (5215F8AC)
fffff801`3dae9000 fffff801`3dc01000   ndis     ndis.sys     Sat Feb 22 17:42:58 2014 (5308944A)
fffff801`3eff2000 fffff801`3effd000   NdisVirtualBus NdisVirtualBus.sys Thu Aug 22 17:06:25 2013 (5215F7B9)
fffff801`3f3e3000 fffff801`3f400000   Ndu      Ndu.sys      Thu Aug 22 17:05:42 2013 (5215F78E)
fffff801`3dacf000 fffff801`3dae0000   netbios  netbios.sys  Thu Aug 22 17:08:58 2013 (5215F852)
fffff801`3e48c000 fffff801`3e4d8000   netbt    netbt.sys    Thu Aug 22 17:07:01 2013 (5215F7DD)
fffff801`3dc01000 fffff801`3dc7a000   NETIO    NETIO.SYS    Thu Aug 22 17:07:08 2013 (5215F7E4)
fffff801`3e612000 fffff801`3e626000   Npfs     Npfs.SYS     Thu Aug 22 17:10:25 2013 (5215F8A9)
fffff801`3e8f6000 fffff801`3e902000   npsvctrig npsvctrig.sys Thu Aug 22 17:08:22 2013 (5215F82E)
fffff801`3e8e8000 fffff801`3e8f6000   nsiproxy nsiproxy.sys Thu Aug 22 17:06:34 2013 (5215F7C2)
fffff800`3841a000 fffff800`38ba3000   nt       ntkrnlmp.exe Thu Mar 06 10:48:55 2014 (5318053F)
fffff801`3d6dd000 fffff801`3d8d3000   Ntfs     Ntfs.sys     Wed Mar 19 09:28:52 2014 (532915FC)
fffff801`3e46d000 fffff801`3e476000   Null     Null.SYS     Thu Aug 22 17:10:24 2013 (5215F8A8)
fffff801`3daa5000 fffff801`3dacf000   pacer    pacer.sys    Thu Aug 22 17:06:06 2013 (5215F7A6)
fffff801`3d3df000 fffff801`3d3f7000   partmgr  partmgr.sys  Thu Aug 22 17:10:20 2013 (5215F8A4)
fffff801`3d36e000 fffff801`3d3b6000   pci      pci.sys      Sat Feb 22 17:42:41 2014 (53089439)
fffff801`3d8ef000 fffff801`3d8ff000   pcw      pcw.sys      Thu Aug 22 14:16:34 2013 (5215CFEA)
fffff801`3d3c3000 fffff801`3d3df000   pdc      pdc.sys      Fri Nov 01 10:28:42 2013 (52733502)
fffff801`3f6c3000 fffff801`3f76c000   peauth   peauth.sys   Sat Feb 22 17:39:37 2014 (53089381)
fffff801`3f143000 fffff801`3f18a000   portcls  portcls.sys  Sat Feb 22 17:41:25 2014 (530893ED)
fffff801`3cf6c000 fffff801`3cf81000   PSHED    PSHED.dll    Sat Sep 14 19:27:19 2013 (52346B3F)
fffff801`3d600000 fffff801`3d670000   rdbss    rdbss.sys    Tue Dec 17 12:51:22 2013 (52AFFB72)
fffff801`3e800000 fffff801`3e80b000   rdpbus   rdpbus.sys   Thu Aug 22 17:08:52 2013 (5215F84C)
fffff801`3de00000 fffff801`3de46000   rdyboost rdyboost.sys Sat Feb 22 17:43:40 2014 (53089474)
fffff801`3d5c5000 fffff801`3d5dd000   rspndr   rspndr.sys   Thu Aug 22 17:06:34 2013 (5215F7C2)
fffff801`3f76c000 fffff801`3f777000   secdrv   secdrv.SYS   Wed Sep 13 18:48:38 2006 (4508052E)
fffff801`3ef71000 fffff801`3ef7e000   serenum  serenum.sys  Thu Aug 22 17:10:17 2013 (5215F8A1)
fffff801`3d99d000 fffff801`3d9b7000   serial   serial.sys   Thu Aug 22 17:10:08 2013 (5215F898)
fffff801`3cf8b000 fffff801`3cfec000   spaceport spaceport.sys Sat Feb 22 17:42:32 2014 (53089430)
fffff801`4085d000 fffff801`408f5000   srv      srv.sys      Sat Oct 05 16:31:15 2013 (524FF17B)
fffff801`3f600000 fffff801`3f6ae000   srv2     srv2.sys     Thu Mar 06 14:52:30 2014 (53183E56)
fffff801`3f777000 fffff801`3f7ba000   srvnet   srvnet.sys   Thu Mar 06 14:50:29 2014 (53183DDD)
fffff801`3d466000 fffff801`3d483000   storahci storahci.sys Thu Aug 22 17:10:39 2013 (5215F8B7)
fffff801`3d483000 fffff801`3d4e2000   storport storport.sys Sat Feb 22 17:43:42 2014 (53089476)
fffff801`3effd000 fffff801`3effe600   swenum   swenum.sys   Thu Aug 22 17:09:29 2013 (5215F871)
fffff801`3de7b000 fffff801`3e0f0000   tcpip    tcpip.sys    Tue Mar 04 15:01:29 2014 (53159D71)
fffff801`3f7ba000 fffff801`3f7cc000   tcpipreg tcpipreg.sys Thu Mar 06 14:49:59 2014 (53183DBF)
fffff801`3e7f0000 fffff801`3e7fe000   TDI      TDI.SYS      Thu Aug 22 17:09:01 2013 (5215F855)
fffff801`3e632000 fffff801`3e652000   tdx      tdx.sys      Thu Aug 22 17:06:34 2013 (5215F7C2)
fffff801`3ef55000 fffff801`3ef71000   TeeDriverx64 TeeDriverx64.sys Thu Sep 05 23:32:18 2013 (5228C72A)
fffff801`3cf4a000 fffff801`3cf6c000   tm       tm.sys       Thu Aug 22 17:09:33 2013 (5215F875)
fffff960`006b9000 fffff960`006c2000   TSDDD    TSDDD.dll    unavailable (00000000)
fffff801`40949000 fffff801`40976000   tunnel   tunnel.sys   Thu Aug 22 17:05:45 2013 (5215F791)
fffff801`3f1ac000 fffff801`3f1c2000   uaspstor uaspstor.sys Thu Aug 22 17:07:58 2013 (5215F816)
fffff801`3ef23000 fffff801`3ef55000   ucx01000 ucx01000.sys Sat Feb 22 17:41:33 2014 (530893F5)
fffff801`3e975000 fffff801`3e986000   umbus    umbus.sys    Thu Aug 22 17:08:59 2013 (5215F853)
fffff801`40833000 fffff801`4083d000   umpass   umpass.sys   Thu Aug 22 17:08:58 2013 (5215F852)
fffff801`3f1c2000 fffff801`3f1ec000   usbccgp  usbccgp.sys  Wed Oct 23 13:47:41 2013 (52678625)
fffff801`3e80b000 fffff801`3e817000   USBD     USBD.SYS     Thu Aug 22 17:10:22 2013 (5215F8A6)
fffff801`3ea00000 fffff801`3ea18000   usbehci  usbehci.sys  Thu Aug 22 17:09:15 2013 (5215F863)
fffff801`3d670000 fffff801`3d6db000   usbhub   usbhub.sys   Thu Aug 22 17:08:33 2013 (5215F839)
fffff801`3f065000 fffff801`3f0dd000   UsbHub3  UsbHub3.sys  Sat Mar 08 14:53:48 2014 (531AE1A4)
fffff801`3ea18000 fffff801`3ea87000   USBPORT  USBPORT.SYS  Thu Aug 22 17:09:40 2013 (5215F87C)
fffff801`3eece000 fffff801`3ef23000   USBXHCI  USBXHCI.SYS  Sat Feb 22 17:41:27 2014 (530893EF)
fffff801`3d3b6000 fffff801`3d3c3000   vdrvroot vdrvroot.sys Thu Aug 22 17:08:49 2013 (5215F849)
fffff801`3d200000 fffff801`3d215000   volmgr   volmgr.sys   Thu Aug 22 17:09:53 2013 (5215F889)
fffff801`3ce00000 fffff801`3ce5f000   volmgrx  volmgrx.sys  Thu Aug 22 17:10:23 2013 (5215F8A7)
fffff801`3e181000 fffff801`3e1d1000   volsnap  volsnap.sys  Sat Feb 22 17:45:51 2014 (530894F7)
fffff801`3e7de000 fffff801`3e7f0000   watchdog watchdog.sys Sat Feb 22 17:44:39 2014 (530894AF)
fffff801`3d12b000 fffff801`3d1fa000   Wdf01000 Wdf01000.sys Thu Aug 22 17:08:56 2013 (5215F850)
fffff801`3d000000 fffff801`3d011000   WDFLDR   WDFLDR.SYS   Thu Aug 22 17:09:03 2013 (5215F857)
fffff801`3cedb000 fffff801`3cee9000   werkernel werkernel.sys Thu Aug 22 17:10:24 2013 (5215F8A8)
fffff801`3e15c000 fffff801`3e181000   wfplwfs  wfplwfs.sys  Sat Mar 08 14:52:45 2014 (531AE165)
fffff960`00085000 fffff960`0049f000   win32k   win32k.sys   unavailable (00000000)
fffff801`3d2cf000 fffff801`3d2d9000   WMILIB   WMILIB.SYS   Thu Aug 22 17:10:23 2013 (5215F8A7)
fffff801`3d56e000 fffff801`3d599000   Wof      Wof.sys      Thu Mar 13 13:57:29 2014 (53216BF1)
fffff801`409df000 fffff801`409ea000   WpdUpFltr WpdUpFltr.sys Thu Aug 22 17:08:45 2013 (5215F845)
fffff801`3d029000 fffff801`3d034000   WppRecorder WppRecorder.sys Thu Aug 22 17:09:40 2013 (5215F87C)
fffff801`40980000 fffff801`409a1000   WudfPf   WudfPf.sys   Thu Aug 22 17:07:21 2013 (5215F7F1)
fffff801`409a1000 fffff801`409df000   WUDFRd   WUDFRd.sys   Thu Aug 22 17:06:50 2013 (5215F7D2)


Unloaded modules:
fffff801`409ea000 fffff801`409f6000   hiber_storpo
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0000C000
fffff801`40800000 fffff801`4081d000   hiber_storah
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0001D000
fffff801`4081d000 fffff801`40833000   hiber_dumpfv
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  00016000
fffff801`40976000 fffff801`40980000   umpass.sys
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0000A000
fffff801`4090b000 fffff801`40949000   WUDFRd.sys
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0003E000
fffff801`3de6c000 fffff801`3de78000   dump_storpor
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0000C000
fffff801`3dde0000 fffff801`3ddfd000   dump_storahc
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0001D000
fffff801`3da00000 fffff801`3da16000   dump_dumpfve
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  00016000
fffff801`3d4e2000 fffff801`3d4fc000   EhStorClass.
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0001A000
fffff801`3e934000 fffff801`3e944000   dam.sys 
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  00010000
fffff801`3de6c000 fffff801`3de78000   hwpolicy.sys
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0000C000
quit:
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
**************************Wed Jun 11 09:28:36.259 2014 (UTC + 5:30)**************************


Opened log file 'C:\Users\BLUEEL~1\AppData\Local\Temp\SysnativeBSODApps\20164\dmps\outkdOutput4.txt'


Microsoft (R) Windows Debugger Version 6.3.9600.16384 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.




Loading Dump File [C:\SysnativeBSODApps\061014-7234-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available




************* Symbol Path validation summary **************
Response                         Time (ms)     Location
Deferred                                       srv*c:\symbols*http://msdl.microsoft.com/download/symbols
Symbol search path is: srv*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is: 
*** ERROR: Symbol file could not be found.  Defaulted to export symbols for ntkrnlmp.exe - 
Windows 8 Kernel Version 9600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 9600.17041.amd64fre.winblue_gdr.140305-1710
Machine Name:
Kernel base = 0xfffff803`d700b000 PsLoadedModuleList = 0xfffff803`d72d52d0
Debug session time: Wed Jun 11 09:28:36.259 2014 (UTC + 5:30)
System Uptime: 1 days 4:27:22.638
*** ERROR: Symbol file could not be found.  Defaulted to export symbols for ntkrnlmp.exe - 
Loading Kernel Symbols
.


Press ctrl-c (cdb, kd, ntsd) or ctrl-break (windbg) to abort symbol loads that take too long.
Run !sym noisy before .reload to track down problems loading symbols.


..............................................................
................................................................
.....................
Loading User Symbols
Loading unloaded module list
.........................


************* Symbol Loading Error Summary **************
Module name            Error
ntkrnlmp               The system cannot find the file specified


You can troubleshoot most symbol related issues by turning on symbol loading diagnostics (!sym noisy) and repeating the command that caused symbols to be loaded.
You should also verify that your symbol search path (.sympath) is correct.
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************


Use !analyze -v to get detailed debugging information.


BugCheck 1A, {41793, fffff6800006a060, 4, 3}


***** Kernel symbols are WRONG. Please fix symbols to do analysis.


*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!KPRCB                                      ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!KPRCB                                      ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_MMPTE                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_MMPTE                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
Probably caused by : ntkrnlmp.exe ( nt!CcTestControl+1de30 )


Followup: MachineOwner
---------


3: kd> !analyze -v; !sysinfo cpuspeed; !sysinfo SMBIOS; lmtsmn; q
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************


MEMORY_MANAGEMENT (1a)
    # Any other values for parameter 1 must be individually examined.
Arguments:
Arg1: 0000000000041793, The subtype of the bugcheck.
Arg2: fffff6800006a060
Arg3: 0000000000000004
Arg4: 0000000000000003


Debugging Details:
------------------


***** Kernel symbols are WRONG. Please fix symbols to do analysis.


*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!KPRCB                                      ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!KPRCB                                      ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_MMPTE                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_MMPTE                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************


ADDITIONAL_DEBUG_TEXT:  


You can run '.symfix; .reload' to try to fix the symbol path and load symbols.


MODULE_NAME: nt


FAULTING_MODULE: fffff803d700b000 nt


DEBUG_FLR_IMAGE_TIMESTAMP:  5318053f


BUGCHECK_STR:  0x1a_41793


CUSTOMER_CRASH_COUNT:  1


DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT


CURRENT_IRQL:  0


ANALYSIS_VERSION: 6.3.9600.16384 (debuggers(dbg).130821-1623) amd64fre


LAST_CONTROL_TRANSFER:  from fffff803d718a07c to fffff803d715efa0


STACK_TEXT:  
ffffd000`20432608 fffff803`d718a07c : 00000000`0000001a 00000000`00041793 fffff680`0006a060 00000000`00000004 : nt!KeBugCheckEx
ffffd000`20432610 fffff803`d707c0b2 : ffffd000`20432b80 fffff800`7d6880b6 00000000`00000000 00000000`00000000 : nt!CcTestControl+0x1de30
ffffd000`204328a0 fffff803`d7078f5d : ffffe000`1fb64c00 00000000`00000010 00000000`00000000 00000000`00000000 : nt!PsReturnProcessNonPagedPoolQuota+0xfce
ffffd000`204329a0 fffff803`d716a7b3 : ffffe000`1f4f0080 00000000`0b4b5138 00000000`0796fdb0 00000000`07a6c200 : nt!NtFreeVirtualMemory+0x89d
ffffd000`20432b00 00007ffb`ff9cad6a : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!setjmpex+0x34b3
00000000`0796e518 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x00007ffb`ff9cad6a




STACK_COMMAND:  kb


FOLLOWUP_IP: 
nt!CcTestControl+1de30
fffff803`d718a07c cc              int     3


SYMBOL_STACK_INDEX:  1


SYMBOL_NAME:  nt!CcTestControl+1de30


FOLLOWUP_NAME:  MachineOwner


IMAGE_NAME:  ntkrnlmp.exe


IMAGE_VERSION:  6.3.9600.17041


BUCKET_ID:  WRONG_SYMBOLS


FAILURE_BUCKET_ID:  WRONG_SYMBOLS


ANALYSIS_SOURCE:  KM


FAILURE_ID_HASH_STRING:  km:wrong_symbols


FAILURE_ID_HASH:  {70b057e8-2462-896f-28e7-ac72d4d365f8}


Followup: MachineOwner
---------


CPUID:        "Intel(R) Core(TM) i5-4670 CPU @ 3.40GHz"
MaxSpeed:     3400
CurrentSpeed: 3392
[SMBIOS Data Tables v2.7]
[DMI Version - 39]
[2.0 Calling Convention - No]
[Table Size - 3045 bytes]


[BIOS Information (Type 0) - Length 24 - Handle 0000h]
  Vendor                        American Megatrends Inc.
  BIOS Version                  F6
  BIOS Starting Address Segment f000
  BIOS Release Date             01/17/2014
  BIOS ROM Size                 800000
  BIOS Characteristics
       07: - PCI Supported
       11: - Upgradeable FLASH BIOS
       12: - BIOS Shadowing Supported
       15: - CD-Boot Supported
       16: - Selectable Boot Supported
       17: - BIOS ROM Socketed
       19: - EDD Supported
       23: - 1.2MB Floppy Supported
       24: - 720KB Floppy Supported
       25: - 2.88MB Floppy Supported
       26: - Print Screen Device Supported
       27: - Keyboard Services Supported
       28: - Serial Services Supported
       29: - Printer Services Supported
       32: - BIOS Vendor Reserved
  BIOS Characteristic Extensions
       00: - ACPI Supported
       01: - USB Legacy Supported
       08: - BIOS Boot Specification Supported
       10: - Specification Reserved
       11: - Specification Reserved
  BIOS Major Revision           4
  BIOS Minor Revision           6
  EC Firmware Major Revision    255
  EC Firmware Minor Revision    255
[System Information (Type 1) - Length 27 - Handle 0001h]
  Manufacturer                  Gigabyte Technology Co., Ltd.
  Product Name                  H87-D3H
  Version                       To be filled by O.E.M.
  Serial Number                                       
  UUID                          00000000-0000-0000-0000-000000000000
  Wakeup Type                   Power Switch
  SKUNumber                     To be filled by O.E.M.
  Family                        To be filled by O.E.M.
[BaseBoard Information (Type 2) - Length 15 - Handle 0002h]
  Manufacturer                  Gigabyte Technology Co., Ltd.
  Product                       H87-D3H-CF
  Version                       x.x
  Serial Number                                       
  Asset Tag                                           
  Feature Flags                 09h
       -831232224: - (null)
       -831232176: - (null)
  Location                      To be filled by O.E.M.
  Chassis Handle                0003h
  Board Type                    0ah - Processor/Memory Module
  Number of Child Handles       0
[System Enclosure (Type 3) - Length 22 - Handle 0003h]
  Manufacturer                  Gigabyte Technology Co., Ltd.
  Chassis Type                  Desktop
  Version                       To Be Filled By O.E.M.
  Serial Number                                       
  Asset Tag Number                                    
  Bootup State                  Safe
  Power Supply State            Safe
  Thermal State                 Safe
  Security Status               None
  OEM Defined                   0
  Height                        0U
  Number of Power Cords         1
  Number of Contained Elements  0
  Contained Element Size        0
[Cache Information (Type 7) - Length 19 - Handle 0004h]
  Socket Designation            CPU Internal L1
  Cache Configuration           0180h - WB Enabled Int NonSocketed L1
  Maximum Cache Size            0100h - 256K
  Installed Size                0100h - 256K
  Supported SRAM Type           0002h - Unknown 
  Current SRAM Type             0002h - Unknown 
  Cache Speed                   0ns
  Error Correction Type         Multi-Bit ECC
  System Cache Type             Other
  Associativity                 8-way Set-Associative
[Cache Information (Type 7) - Length 19 - Handle 0005h]
  Socket Designation            CPU Internal L2
  Cache Configuration           0181h - WB Enabled Int NonSocketed L2
  Maximum Cache Size            0400h - 1024K
  Installed Size                0400h - 1024K
  Supported SRAM Type           0002h - Unknown 
  Current SRAM Type             0002h - Unknown 
  Cache Speed                   0ns
  Error Correction Type         Multi-Bit ECC
  System Cache Type             Unified
  Associativity                 8-way Set-Associative
[Cache Information (Type 7) - Length 19 - Handle 0006h]
  Socket Designation            CPU Internal L3
  Cache Configuration           0182h - WB Enabled Int NonSocketed L3
  Maximum Cache Size            1800h - 6144K
  Installed Size                1800h - 6144K
  Supported SRAM Type           0002h - Unknown 
  Current SRAM Type             0002h - Unknown 
  Cache Speed                   0ns
  Error Correction Type         Multi-Bit ECC
  System Cache Type             Unified
  Associativity                 Specification Reserved
[Physical Memory Array (Type 16) - Length 23 - Handle 0007h]
  Location                      03h - SystemBoard/Motherboard
  Use                           03h - System Memory
  Memory Error Correction       03h - None
  Maximum Capacity              33554432KB
  Memory Error Inf Handle       [Not Provided]
  Number of Memory Devices      4
[Onboard Devices Information (Type 10) - Length 6 - Handle 0026h]
  Number of Devices             1
  01: Type                      Video [enabled]
  01: Description                  To Be Filled By O.E.M.
[OEM Strings (Type 11) - Length 5 - Handle 0027h]
  Number of Strings             1
   1                            To Be Filled By O.E.M.
[System Configuration Options (Type 12) - Length 5 - Handle 0028h]
[Processor Information (Type 4) - Length 42 - Handle 0041h]
  Socket Designation            SOCKET 0
  Processor Type                Central Processor
  Processor Family              c6h - Specification Reserved
  Processor Manufacturer        Intel
  Processor ID                  c3060300fffbebbf
  Processor Version             Intel(R) Core(TM) i5-4670 CPU @ 3.40GHz
  Processor Voltage             8bh - 1.1V
  External Clock                100MHz
  Max Speed                     7000MHz
  Current Speed                 3600MHz
  Status                        Enabled Populated
  Processor Upgrade             Other
  L1 Cache Handle               0004h
  L2 Cache Handle               0005h
  L3 Cache Handle               0006h
  Serial Number                 [String Not Specified]
  Asset Tag Number                         
  Part Number                   Fill By OEM
[Memory Device (Type 17) - Length 34 - Handle 0042h]
  Physical Memory Array Handle  0007h
  Memory Error Info Handle      [Not Provided]
  Total Width                   0 bits
  Data Width                    0 bits
  Size                          [Not Populated]
  Form Factor                   09h - DIMM
  Device Set                    [None]
  Device Locator                ChannelA-DIMM0
  Bank Locator                  BANK 0
  Memory Type                   02h - Unknown
  Type Detail                   0000h -
  Speed                         0MHz
  Manufacturer                  [Empty]
  Serial Number                        
  Asset Tag Number                        
  Part Number                   [Empty]
[Memory Device (Type 17) - Length 34 - Handle 0043h]
  Physical Memory Array Handle  0007h
  Memory Error Info Handle      [Not Provided]
  Total Width                   64 bits
  Data Width                    64 bits
  Size                          8192MB
  Form Factor                   09h - DIMM
  Device Set                    [None]
  Device Locator                ChannelA-DIMM1
  Bank Locator                  BANK 1
  Memory Type                   18h - Specification Reserved
  Type Detail                   0080h - Synchronous
  Speed                         1600MHz
  Manufacturer                  1315
  Serial Number                         
  Asset Tag Number                        
  Part Number                   BLS8G3D1609DS1S00.
[Memory Device Mapped Address (Type 20) - Length 35 - Handle 0044h]
  Starting Address              00000000h
  Ending Address                007fffffh
  Memory Device Handle          0043h
  Mem Array Mapped Adr Handle   0048h
  Partition Row Position        [Unknown]
  Interleave Position           [Unknown]
  Interleave Data Depth         [Unknown]
[Memory Device (Type 17) - Length 34 - Handle 0045h]
  Physical Memory Array Handle  0007h
  Memory Error Info Handle      [Not Provided]
  Total Width                   0 bits
  Data Width                    0 bits
  Size                          [Not Populated]
  Form Factor                   09h - DIMM
  Device Set                    [None]
  Device Locator                ChannelB-DIMM0
  Bank Locator                  BANK 2
  Memory Type                   02h - Unknown
  Type Detail                   0000h -
  Speed                         0MHz
  Manufacturer                  [Empty]
  Serial Number                        
  Asset Tag Number                        
  Part Number                   [Empty]
[Memory Device (Type 17) - Length 34 - Handle 0046h]
  Physical Memory Array Handle  0007h
  Memory Error Info Handle      [Not Provided]
  Total Width                   64 bits
  Data Width                    64 bits
  Size                          8192MB
  Form Factor                   09h - DIMM
  Device Set                    [None]
  Device Locator                ChannelB-DIMM1
  Bank Locator                  BANK 3
  Memory Type                   18h - Specification Reserved
  Type Detail                   0080h - Synchronous
  Speed                         1600MHz
  Manufacturer                  1315
  Serial Number                         
  Asset Tag Number                        
  Part Number                   BLS8G3D1609DS1S00.
[Memory Device Mapped Address (Type 20) - Length 35 - Handle 0047h]
  Starting Address              00800000h
  Ending Address                00ffffffh
  Memory Device Handle          0046h
  Mem Array Mapped Adr Handle   0048h
  Partition Row Position        [Unknown]
  Interleave Position           [Unknown]
  Interleave Data Depth         [Unknown]
[Memory Array Mapped Address (Type 19) - Length 31 - Handle 0048h]
  Starting Address              00000000h
  Ending Address                00ffffffh
  Memory Array Handle           0007h
  Partition Width               04
start             end                 module name
fffff800`7d513000 fffff800`7d59d000   ACPI     ACPI.sys     Sat Feb 22 17:43:57 2014 (53089485)
fffff800`7d4f0000 fffff800`7d508000   acpiex   acpiex.sys   Thu Aug 22 17:07:47 2013 (5215F80B)
fffff800`7d724000 fffff800`7d7b7000   afd      afd.sys      Thu Aug 22 17:06:50 2013 (5215F7D2)
fffff800`7e800000 fffff800`7e817000   ahcache  ahcache.sys  Thu Aug 22 17:09:54 2013 (5215F88A)
fffff800`7f4a6000 fffff800`7f4b0000   aswHwid  aswHwid.sys  Tue Apr 08 21:13:26 2014 (5344191E)
fffff800`7ea00000 fffff800`7ea22000   aswMonFlt aswMonFlt.sys Thu Apr 17 16:34:01 2014 (534FB521)
fffff800`7dbdc000 fffff800`7dbf6000   aswRdr2  aswRdr2.sys  Thu Apr 17 16:32:56 2014 (534FB4E0)
fffff800`7dded000 fffff800`7de00000   aswRvrt  aswRvrt.sys  Thu Apr 17 16:34:41 2014 (534FB549)
fffff800`7e4a9000 fffff800`7e5aa000   aswSnx   aswSnx.sys   Mon May 05 13:34:42 2014 (5367461A)
fffff800`7e400000 fffff800`7e46d000   aswSP    aswSP.sys    Mon May 05 13:41:11 2014 (5367479F)
fffff800`7efe8000 fffff800`7f000000   aswStm   aswStm.sys   Mon May 05 13:41:48 2014 (536747C4)
fffff800`7d800000 fffff800`7d835000   aswVmm   aswVmm.sys   Thu Apr 17 16:34:55 2014 (534FB557)
fffff960`00b57000 fffff960`00bb6000   ATMFD    ATMFD.DLL    unavailable (00000000)
fffff800`7e48c000 fffff800`7e49e000   BasicDisplay BasicDisplay.sys Thu Aug 22 17:09:31 2013 (5215F873)
fffff800`7e47e000 fffff800`7e48c000   BasicRender BasicRender.sys Sat Feb 22 17:44:02 2014 (5308948A)
fffff800`7e476000 fffff800`7e47e000   Beep     Beep.SYS     Thu Aug 22 17:10:24 2013 (5215F8A8)
fffff800`7d18b000 fffff800`7d195000   BOOTVID  BOOTVID.dll  Thu Aug 22 17:10:26 2013 (5215F8AA)
fffff800`7f5be000 fffff800`7f5de000   bowser   bowser.sys   Thu Aug 22 17:08:38 2013 (5215F83E)
fffff960`00951000 fffff960`0098c000   cdd      cdd.dll      unavailable (00000000)
fffff800`7d87d000 fffff800`7d8ab000   cdrom    cdrom.sys    Thu Aug 22 14:16:35 2013 (5215CFEB)
fffff800`7d25c000 fffff800`7d2e4000   CI       CI.dll       Sat Feb 22 17:42:12 2014 (5308941C)
fffff800`7db86000 fffff800`7dbdc000   CLASSPNP CLASSPNP.SYS Sat Mar 08 14:57:06 2014 (531AE26A)
fffff800`7d0f3000 fffff800`7d154000   CLFS     CLFS.SYS     Wed Mar 19 13:42:20 2014 (53295164)
fffff800`7d341000 fffff800`7d3cc000   cng      cng.sys      Sat Mar 08 14:55:08 2014 (531AE1F4)
fffff800`7e817000 fffff800`7e826000   CompositeBus CompositeBus.sys Thu Aug 22 17:08:48 2013 (5215F848)
fffff800`7ea22000 fffff800`7ea32000   condrv   condrv.sys   Thu Aug 22 17:10:17 2013 (5215F8A1)
fffff800`7d835000 fffff800`7d84a000   crashdmp crashdmp.sys Thu Aug 22 17:10:03 2013 (5215F893)
fffff800`7e90d000 fffff800`7e99b000   csc      csc.sys      Thu Aug 22 17:08:00 2013 (5215F818)
fffff800`7e9c1000 fffff800`7e9e7000   dfsc     dfsc.sys     Thu Mar 06 14:52:50 2014 (53183E6A)
fffff800`7db6a000 fffff800`7db86000   disk     disk.sys     Thu Aug 22 17:09:47 2013 (5215F883)
fffff800`7f33e000 fffff800`7f35a000   drmk     drmk.sys     Thu Aug 22 17:09:24 2013 (5215F86C)
fffff800`7f1e7000 fffff800`7f1f3000   dump_diskdump dump_diskdump.sys Thu Aug 22 17:10:18 2013 (5215F8A2)
fffff800`7efae000 fffff800`7efc4000   dump_dumpfve dump_dumpfve.sys Sat Feb 22 17:44:48 2014 (530894B8)
fffff800`7f000000 fffff800`7f01d000   dump_storahci dump_storahci.sys Thu Aug 22 17:10:39 2013 (5215F8B7)
fffff800`7e60b000 fffff800`7e78c000   dxgkrnl  dxgkrnl.sys  Thu Mar 06 14:52:58 2014 (53183E72)
fffff800`7e79e000 fffff800`7e7ff000   dxgmms1  dxgmms1.sys  Thu Mar 06 14:52:14 2014 (53183E46)
fffff800`7ef22000 fffff800`7ef96000   e1i63x64 e1i63x64.sys Wed Mar 20 13:07:29 2013 (51496739)
fffff800`7f1ae000 fffff800`7f1e7000   fastfat  fastfat.SYS  Thu Aug 22 17:10:18 2013 (5215F8A2)
fffff800`7d6e3000 fffff800`7d6f9000   fileinfo fileinfo.sys Sat Feb 22 17:43:10 2014 (53089456)
fffff800`7d687000 fffff800`7d6e3000   fltmgr   fltmgr.sys   Sat Feb 22 17:45:40 2014 (530894EC)
fffff800`7db19000 fffff800`7db24000   Fs_Rec   Fs_Rec.sys   Thu Aug 22 14:16:33 2013 (5215CFE9)
fffff800`7e168000 fffff800`7e1fd000   fvevol   fvevol.sys   Sat Feb 22 17:41:54 2014 (5308940A)
fffff800`7e0d7000 fffff800`7e143000   fwpkclnt fwpkclnt.sys Tue Mar 04 14:58:07 2014 (53159CA7)
fffff800`7f09f000 fffff800`7f0a5c00   GEARAspiWDM GEARAspiWDM.sys Fri May 04 01:26:17 2012 (4FA2E2E1)
fffff803`d7794000 fffff803`d7804000   hal      hal.dll      Sat Feb 22 17:45:53 2014 (530894F9)
fffff800`7ee59000 fffff800`7ee72000   HDAudBus HDAudBus.sys Thu Aug 22 17:08:37 2013 (5215F83D)
fffff800`7f291000 fffff800`7f2f7000   HdAudio  HdAudio.sys  Thu Aug 22 17:08:19 2013 (5215F82B)
fffff800`7f3ae000 fffff800`7f3cd000   HIDCLASS HIDCLASS.SYS Thu Mar 06 14:54:40 2014 (53183ED8)
fffff800`7f3cd000 fffff800`7f3d4f00   HIDPARSE HIDPARSE.SYS Thu Aug 22 17:10:26 2013 (5215F8AA)
fffff800`7f3a0000 fffff800`7f3ae000   hidusb   hidusb.sys   Thu Mar 06 14:54:14 2014 (53183EBE)
fffff800`7f4c4000 fffff800`7f5be000   HTTP     HTTP.sys     Tue Jan 28 01:18:02 2014 (52E6B7F2)
fffff800`7ea35000 fffff800`7ee59000   igdkmd64 igdkmd64.sys Thu Jan 23 04:12:16 2014 (52E04948)
fffff800`7de50000 fffff800`7de5f000   intelpep intelpep.sys Sat Nov 09 14:15:55 2013 (527DF643)
fffff800`7f0a6000 fffff800`7f0c4000   intelppm intelppm.sys Thu Aug 22 14:16:35 2013 (5215CFEB)
fffff800`7f120000 fffff800`7f12c000   iwdbus   iwdbus.sys   Wed Dec 18 04:17:38 2013 (52B0D48A)
fffff800`7f3e3000 fffff800`7f3f3000   kbdclass kbdclass.sys Thu Aug 22 17:09:23 2013 (5215F86B)
fffff800`7f3d5000 fffff800`7f3e3000   kbdhid   kbdhid.sys   Thu Aug 22 17:09:13 2013 (5215F861)
fffff803`d643e000 fffff803`d6447000   kd       kd.dll       Thu Aug 22 17:10:43 2013 (5215F8BB)
fffff800`7e826000 fffff800`7e831000   kdnic    kdnic.sys    Thu Aug 22 17:08:26 2013 (5215F832)
fffff800`7f0d1000 fffff800`7f120000   ks       ks.sys       Sat Feb 22 17:44:40 2014 (530894B0)
fffff800`7daed000 fffff800`7db09000   ksecdd   ksecdd.sys   Sat Sep 21 13:29:44 2013 (523D51F0)
fffff800`7dc00000 fffff800`7dc31000   ksecpkg  ksecpkg.sys  Sat Mar 08 14:54:07 2014 (531AE1B7)
fffff800`7f35a000 fffff800`7f35f300   ksthunk  ksthunk.sys  Thu Aug 22 17:09:31 2013 (5215F873)
fffff800`7e842000 fffff800`7e856000   lltdio   lltdio.sys   Thu Aug 22 17:06:18 2013 (5215F7B2)
fffff800`7efc4000 fffff800`7efe8000   luafv    luafv.sys    Sat Feb 22 17:44:25 2014 (530894A1)
fffff800`7d07f000 fffff800`7d0e5000   mcupdate_GenuineIntel mcupdate_GenuineIntel.dll Thu Aug 22 17:10:16 2013 (5215F8A0)
fffff800`7f01d000 fffff800`7f02b000   monitor  monitor.sys  Thu Aug 22 17:06:37 2013 (5215F7C5)
fffff800`7f200000 fffff800`7f210000   mouclass mouclass.sys Thu Aug 22 17:09:13 2013 (5215F861)
fffff800`7f3f3000 fffff800`7f400000   mouhid   mouhid.sys   Thu Aug 22 17:09:13 2013 (5215F861)
fffff800`7d215000 fffff800`7d230000   mountmgr mountmgr.sys Thu Aug 22 17:10:04 2013 (5215F894)
fffff800`7f5de000 fffff800`7f5f5000   mpsdrv   mpsdrv.sys   Thu Aug 22 17:06:06 2013 (5215F7A6)
fffff800`7f400000 fffff800`7f46d000   mrxsmb   mrxsmb.sys   Thu Mar 06 14:50:21 2014 (53183DD5)
fffff800`7f612000 fffff800`7f65d000   mrxsmb10 mrxsmb10.sys Thu Mar 06 14:49:36 2014 (53183DA8)
fffff800`7f46d000 fffff800`7f4a6000   mrxsmb20 mrxsmb20.sys Sat Sep 21 13:27:59 2013 (523D5187)
fffff800`7e5be000 fffff800`7e5ca000   Msfs     Msfs.SYS     Thu Aug 22 17:10:24 2013 (5215F8A8)
fffff800`7d5a7000 fffff800`7d5b1000   msisadrv msisadrv.sys Thu Aug 22 17:09:03 2013 (5215F857)
fffff800`80898000 fffff800`808ae000   mslldp   mslldp.sys   Thu Aug 22 17:06:07 2013 (5215F7A7)
fffff800`7d2e4000 fffff800`7d341000   msrpc    msrpc.sys    Thu Aug 22 17:09:22 2013 (5215F86A)
fffff800`7e9b5000 fffff800`7e9c1000   mssmbios mssmbios.sys Thu Aug 22 17:09:41 2013 (5215F87D)
fffff800`7dc31000 fffff800`7dc48000   mup      mup.sys      Thu Aug 22 17:10:28 2013 (5215F8AC)
fffff800`7dc50000 fffff800`7dd68000   ndis     ndis.sys     Sat Feb 22 17:42:58 2014 (5308944A)
fffff800`7f0c4000 fffff800`7f0cf000   NdisVirtualBus NdisVirtualBus.sys Thu Aug 22 17:06:25 2013 (5215F7B9)
fffff800`7f65d000 fffff800`7f67a000   Ndu      Ndu.sys      Thu Aug 22 17:05:42 2013 (5215F78E)
fffff800`7d7e1000 fffff800`7d7f2000   netbios  netbios.sys  Thu Aug 22 17:08:58 2013 (5215F852)
fffff800`7d8ab000 fffff800`7d8f7000   netbt    netbt.sys    Thu Aug 22 17:07:01 2013 (5215F7DD)
fffff800`7dd68000 fffff800`7dde1000   NETIO    NETIO.SYS    Thu Aug 22 17:07:08 2013 (5215F7E4)
fffff800`7e5aa000 fffff800`7e5be000   Npfs     Npfs.SYS     Thu Aug 22 17:10:25 2013 (5215F8A9)
fffff800`7e9a9000 fffff800`7e9b5000   npsvctrig npsvctrig.sys Thu Aug 22 17:08:22 2013 (5215F82E)
fffff800`7e99b000 fffff800`7e9a9000   nsiproxy nsiproxy.sys Thu Aug 22 17:06:34 2013 (5215F7C2)
fffff803`d700b000 fffff803`d7794000   nt       ntkrnlmp.exe Thu Mar 06 10:48:55 2014 (5318053F)
fffff800`7d8f7000 fffff800`7daed000   Ntfs     Ntfs.sys     Wed Mar 19 09:28:52 2014 (532915FC)
fffff800`7e46d000 fffff800`7e476000   Null     Null.SYS     Thu Aug 22 17:10:24 2013 (5215F8A8)
fffff800`7d7b7000 fffff800`7d7e1000   pacer    pacer.sys    Thu Aug 22 17:06:06 2013 (5215F7A6)
fffff800`7d3e8000 fffff800`7d400000   partmgr  partmgr.sys  Thu Aug 22 17:10:20 2013 (5215F8A4)
fffff800`7d5b1000 fffff800`7d5f9000   pci      pci.sys      Sat Feb 22 17:42:41 2014 (53089439)
fffff800`7db09000 fffff800`7db19000   pcw      pcw.sys      Thu Aug 22 14:16:34 2013 (5215CFEA)
fffff800`7d3cc000 fffff800`7d3e8000   pdc      pdc.sys      Fri Nov 01 10:28:42 2013 (52733502)
fffff800`7f67a000 fffff800`7f723000   peauth   peauth.sys   Sat Feb 22 17:39:37 2014 (53089381)
fffff800`7f2f7000 fffff800`7f33e000   portcls  portcls.sys  Sat Feb 22 17:41:25 2014 (530893ED)
fffff800`7d176000 fffff800`7d18b000   PSHED    PSHED.dll    Sat Sep 14 19:27:19 2013 (52346B3F)
fffff800`7e89d000 fffff800`7e90d000   rdbss    rdbss.sys    Tue Dec 17 12:51:22 2013 (52AFFB72)
fffff800`7f12c000 fffff800`7f137000   rdpbus   rdpbus.sys   Thu Aug 22 17:08:52 2013 (5215F84C)
fffff800`7db24000 fffff800`7db6a000   rdyboost rdyboost.sys Sat Feb 22 17:43:40 2014 (53089474)
fffff800`7e856000 fffff800`7e86e000   rspndr   rspndr.sys   Thu Aug 22 17:06:34 2013 (5215F7C2)
fffff800`7f723000 fffff800`7f72e000   secdrv   secdrv.SYS   Wed Sep 13 18:48:38 2006 (4508052E)
fffff800`7ef15000 fffff800`7ef22000   serenum  serenum.sys  Thu Aug 22 17:10:17 2013 (5215F8A1)
fffff800`7d05f000 fffff800`7d079000   serial   serial.sys   Thu Aug 22 17:10:08 2013 (5215F898)
fffff800`7d195000 fffff800`7d1f6000   spaceport spaceport.sys Sat Feb 22 17:42:32 2014 (53089430)
fffff800`80800000 fffff800`80898000   srv      srv.sys      Sat Oct 05 16:31:15 2013 (524FF17B)
fffff800`808ca000 fffff800`80978000   srv2     srv2.sys     Thu Mar 06 14:52:30 2014 (53183E56)
fffff800`7f72e000 fffff800`7f771000   srvnet   srvnet.sys   Thu Mar 06 14:50:29 2014 (53183DDD)
fffff800`7d230000 fffff800`7d24d000   storahci storahci.sys Thu Aug 22 17:10:39 2013 (5215F8B7)
fffff800`7d60e000 fffff800`7d66d000   storport storport.sys Sat Feb 22 17:43:42 2014 (53089476)
fffff800`7f0cf000 fffff800`7f0d0600   swenum   swenum.sys   Thu Aug 22 17:09:29 2013 (5215F871)
fffff800`7de62000 fffff800`7e0d7000   tcpip    tcpip.sys    Tue Mar 04 15:01:29 2014 (53159D71)
fffff800`7f771000 fffff800`7f783000   tcpipreg tcpipreg.sys Thu Mar 06 14:49:59 2014 (53183DBF)
fffff800`7e5ea000 fffff800`7e5f8000   TDI      TDI.SYS      Thu Aug 22 17:09:01 2013 (5215F855)
fffff800`7e5ca000 fffff800`7e5ea000   tdx      tdx.sys      Thu Aug 22 17:06:34 2013 (5215F7C2)
fffff800`7eef9000 fffff800`7ef15000   TeeDriverx64 TeeDriverx64.sys Thu Sep 05 23:32:18 2013 (5228C72A)
fffff800`7d154000 fffff800`7d176000   tm       tm.sys       Thu Aug 22 17:09:33 2013 (5215F875)
fffff960`007cf000 fffff960`007d8000   TSDDD    TSDDD.dll    unavailable (00000000)
fffff800`809b6000 fffff800`809e3000   tunnel   tunnel.sys   Thu Aug 22 17:05:45 2013 (5215F791)
fffff800`7f360000 fffff800`7f376000   uaspstor uaspstor.sys Thu Aug 22 17:07:58 2013 (5215F816)
fffff800`7eec7000 fffff800`7eef9000   ucx01000 ucx01000.sys Sat Feb 22 17:41:33 2014 (530893F5)
fffff800`7e831000 fffff800`7e842000   umbus    umbus.sys    Thu Aug 22 17:08:59 2013 (5215F853)
fffff800`809a4000 fffff800`809ae000   umpass   umpass.sys   Thu Aug 22 17:08:58 2013 (5215F852)
fffff800`7f376000 fffff800`7f3a0000   usbccgp  usbccgp.sys  Wed Oct 23 13:47:41 2013 (52678625)
fffff800`7f1a2000 fffff800`7f1ae000   USBD     USBD.SYS     Thu Aug 22 17:10:22 2013 (5215F8A6)
fffff800`7ef96000 fffff800`7efae000   usbehci  usbehci.sys  Thu Aug 22 17:09:15 2013 (5215F863)
fffff800`7f137000 fffff800`7f1a2000   usbhub   usbhub.sys   Thu Aug 22 17:08:33 2013 (5215F839)
fffff800`7f219000 fffff800`7f291000   UsbHub3  UsbHub3.sys  Sat Mar 08 14:53:48 2014 (531AE1A4)
fffff800`7f030000 fffff800`7f09f000   USBPORT  USBPORT.SYS  Thu Aug 22 17:09:40 2013 (5215F87C)
fffff800`7ee72000 fffff800`7eec7000   USBXHCI  USBXHCI.SYS  Sat Feb 22 17:41:27 2014 (530893EF)
fffff800`7d400000 fffff800`7d40d000   vdrvroot vdrvroot.sys Thu Aug 22 17:08:49 2013 (5215F849)
fffff800`7d200000 fffff800`7d215000   volmgr   volmgr.sys   Thu Aug 22 17:09:53 2013 (5215F889)
fffff800`7d000000 fffff800`7d05f000   volmgrx  volmgrx.sys  Thu Aug 22 17:10:23 2013 (5215F8A7)
fffff800`7de00000 fffff800`7de50000   volsnap  volsnap.sys  Sat Feb 22 17:45:51 2014 (530894F7)
fffff800`7e78c000 fffff800`7e79e000   watchdog watchdog.sys Sat Feb 22 17:44:39 2014 (530894AF)
fffff800`7d410000 fffff800`7d4df000   Wdf01000 Wdf01000.sys Thu Aug 22 17:08:56 2013 (5215F850)
fffff800`7d4df000 fffff800`7d4f0000   WDFLDR   WDFLDR.SYS   Thu Aug 22 17:09:03 2013 (5215F857)
fffff800`7d0e5000 fffff800`7d0f3000   werkernel werkernel.sys Thu Aug 22 17:10:24 2013 (5215F8A8)
fffff800`7e143000 fffff800`7e168000   wfplwfs  wfplwfs.sys  Sat Mar 08 14:52:45 2014 (531AE165)
fffff960`0019c000 fffff960`005b6000   win32k   win32k.sys   unavailable (00000000)
fffff800`7d59d000 fffff800`7d5a7000   WMILIB   WMILIB.SYS   Thu Aug 22 17:10:23 2013 (5215F8A7)
fffff800`7d6f9000 fffff800`7d724000   Wof      Wof.sys      Thu Mar 13 13:57:29 2014 (53216BF1)
fffff800`80999000 fffff800`809a4000   WpdUpFltr WpdUpFltr.sys Thu Aug 22 17:08:45 2013 (5215F845)
fffff800`7d508000 fffff800`7d513000   WppRecorder WppRecorder.sys Thu Aug 22 17:09:40 2013 (5215F87C)
fffff800`80978000 fffff800`80999000   WudfPf   WudfPf.sys   Thu Aug 22 17:07:21 2013 (5215F7F1)
fffff800`7f783000 fffff800`7f7c1000   WUDFRd   WUDFRd.sys   Thu Aug 22 17:06:50 2013 (5215F7D2)


Unloaded modules:
fffff800`809e3000 fffff800`809ef000   hiber_storpo
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0000C000
fffff800`7f7de000 fffff800`7f7fb000   hiber_storah
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0001D000
fffff800`808ae000 fffff800`808c4000   hiber_dumpfv
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  00016000
fffff800`809a4000 fffff800`809ae000   umpass.sys
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0000A000
fffff800`809e3000 fffff800`809f5000   usbaapl64.sy
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  00012000
fffff800`808ae000 fffff800`808c7000   WinUSB.SYS
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  00019000
fffff800`809e3000 fffff800`809ef000   hiber_storpo
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0000C000
fffff800`7f7c1000 fffff800`7f7de000   hiber_storah
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0001D000
fffff800`808ae000 fffff800`808c4000   hiber_dumpfv
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  00016000
fffff800`809a4000 fffff800`809ae000   umpass.sys
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0000A000
fffff800`809e3000 fffff800`809ef000   hiber_storpo
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0000C000
fffff800`7f7de000 fffff800`7f7fb000   hiber_storah
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0001D000
fffff800`808ae000 fffff800`808c4000   hiber_dumpfv
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  00016000
fffff800`809a4000 fffff800`809ae000   umpass.sys
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0000A000
fffff800`809e3000 fffff800`809ef000   hiber_storpo
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0000C000
fffff800`7f7c1000 fffff800`7f7de000   hiber_storah
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0001D000
fffff800`808ae000 fffff800`808c4000   hiber_dumpfv
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  00016000
fffff800`809a4000 fffff800`809ae000   umpass.sys
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0000A000
fffff800`80978000 fffff800`809b6000   WUDFRd.sys
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0003E000
fffff800`7dde1000 fffff800`7dded000   dump_storpor
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0000C000
fffff800`7d84a000 fffff800`7d867000   dump_storahc
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0001D000
fffff800`7d867000 fffff800`7d87d000   dump_dumpfve
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  00016000
fffff800`7d66d000 fffff800`7d687000   EhStorClass.
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0001A000
fffff800`7e9e7000 fffff800`7e9f7000   dam.sys 
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  00010000
fffff800`7dde1000 fffff800`7dded000   hwpolicy.sys
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0000C000
quit:
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
**************************Tue Jun 10 05:00:49.729 2014 (UTC + 5:30)**************************


Opened log file 'C:\Users\BLUEEL~1\AppData\Local\Temp\SysnativeBSODApps\20164\dmps\outkdOutput5.txt'


Microsoft (R) Windows Debugger Version 6.3.9600.16384 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.




Loading Dump File [C:\SysnativeBSODApps\060914-5250-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available




************* Symbol Path validation summary **************
Response                         Time (ms)     Location
Deferred                                       srv*c:\symbols*http://msdl.microsoft.com/download/symbols
Symbol search path is: srv*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is: 
*** ERROR: Symbol file could not be found.  Defaulted to export symbols for ntkrnlmp.exe - 
Windows 8 Kernel Version 9600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 9600.17041.amd64fre.winblue_gdr.140305-1710
Machine Name:
Kernel base = 0xfffff802`27208000 PsLoadedModuleList = 0xfffff802`274d22d0
Debug session time: Tue Jun 10 05:00:49.729 2014 (UTC + 5:30)
System Uptime: 0 days 19:09:46.570
*** ERROR: Symbol file could not be found.  Defaulted to export symbols for ntkrnlmp.exe - 
Loading Kernel Symbols
.


Press ctrl-c (cdb, kd, ntsd) or ctrl-break (windbg) to abort symbol loads that take too long.
Run !sym noisy before .reload to track down problems loading symbols.


..............................................................
................................................................
......................
Loading User Symbols
Loading unloaded module list
.......................


************* Symbol Loading Error Summary **************
Module name            Error
ntkrnlmp               The system cannot find the file specified


You can troubleshoot most symbol related issues by turning on symbol loading diagnostics (!sym noisy) and repeating the command that caused symbols to be loaded.
You should also verify that your symbol search path (.sympath) is correct.
*** ERROR: Module load completed but symbols could not be loaded for Ntfs.sys
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************


Use !analyze -v to get detailed debugging information.


BugCheck 24, {b500190637, ffffd000204f3108, ffffd000204f2910, fffff802272f38f4}


***** Kernel symbols are WRONG. Please fix symbols to do analysis.


*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!KPRCB                                      ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!KPRCB                                      ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_MMPTE                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_MMPTE                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_MMPTE                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
Probably caused by : ntkrnlmp.exe ( nt!NtReadFile+7ca )


Followup: MachineOwner
---------


1: kd> !analyze -v; !sysinfo cpuspeed; !sysinfo SMBIOS; lmtsmn; q
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************


NTFS_FILE_SYSTEM (24)
    If you see NtfsExceptionFilter on the stack then the 2nd and 3rd
    parameters are the exception record and context record. Do a .cxr
    on the 3rd parameter and then kb to obtain a more informative stack
    trace.
Arguments:
Arg1: 000000b500190637
Arg2: ffffd000204f3108
Arg3: ffffd000204f2910
Arg4: fffff802272f38f4


Debugging Details:
------------------


***** Kernel symbols are WRONG. Please fix symbols to do analysis.


*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!KPRCB                                      ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!KPRCB                                      ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_MMPTE                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_MMPTE                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_MMPTE                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************


ADDITIONAL_DEBUG_TEXT:  


You can run '.symfix; .reload' to try to fix the symbol path and load symbols.


MODULE_NAME: nt


FAULTING_MODULE: fffff80227208000 nt


DEBUG_FLR_IMAGE_TIMESTAMP:  5318053f


EXCEPTION_RECORD:  ffffd000204f3108 -- (.exr 0xffffd000204f3108)
.exr 0xffffd000204f3108
ExceptionAddress: fffff802272f38f4 (nt!ExIsResourceAcquiredExclusiveLite)
   ExceptionCode: c0000005 (Access violation)
  ExceptionFlags: 00000000
NumberParameters: 2
   Parameter[0]: 0000000000000000
   Parameter[1]: ffffffffffffffff
Attempt to read from address ffffffffffffffff


CONTEXT:  ffffd000204f2910 -- (.cxr 0xffffd000204f2910;r)
.cxr 0xffffd000204f2910;r
rax=ffffc000e4655010 rbx=ffffe000b835c988 rcx=e000bb4272f80500
rdx=0000000000000000 rsi=0000000000000000 rdi=ffffc000e4755140
rip=fffff802272f38f4 rsp=ffffd000204f3348 rbp=ffffd000204f3790
 r8=0000000000000000  r9=0000000000000000 r10=ffffe000bb4f3d78
r11=ffffd000204f3300 r12=0000000000000000 r13=ffffe000b8c6b180
r14=ffffc000e4755100 r15=0000000000000000
iopl=0         nv up ei ng nz na po nc
cs=0010  ss=0018  ds=002b  es=002b  fs=0053  gs=002b             efl=00010286
nt!ExIsResourceAcquiredExclusiveLite:
fffff802`272f38f4 8a511a          mov     dl,byte ptr [rcx+1Ah] ds:002b:e000bb42`72f8051a=??
Last set context:
rax=ffffc000e4655010 rbx=ffffe000b835c988 rcx=e000bb4272f80500
rdx=0000000000000000 rsi=0000000000000000 rdi=ffffc000e4755140
rip=fffff802272f38f4 rsp=ffffd000204f3348 rbp=ffffd000204f3790
 r8=0000000000000000  r9=0000000000000000 r10=ffffe000bb4f3d78
r11=ffffd000204f3300 r12=0000000000000000 r13=ffffe000b8c6b180
r14=ffffc000e4755100 r15=0000000000000000
iopl=0         nv up ei ng nz na po nc
cs=0010  ss=0018  ds=002b  es=002b  fs=0053  gs=002b             efl=00010286
nt!ExIsResourceAcquiredExclusiveLite:
fffff802`272f38f4 8a511a          mov     dl,byte ptr [rcx+1Ah] ds:002b:e000bb42`72f8051a=??
.cxr
Resetting default scope


CUSTOMER_CRASH_COUNT:  1


DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT


BUGCHECK_STR:  0x24


CURRENT_IRQL:  0


ANALYSIS_VERSION: 6.3.9600.16384 (debuggers(dbg).130821-1623) amd64fre


LAST_CONTROL_TRANSFER:  from fffff80037b4bcb8 to fffff802272f38f4


STACK_TEXT:  
ffffd000`204f3348 fffff800`37b4bcb8 : ffffe000`b835c988 ffffd000`204f3790 00000000`00000000 ffffc000`e4755140 : nt!ExIsResourceAcquiredExclusiveLite
ffffd000`204f3350 fffff800`37bd0f42 : ffffe000`b835c988 ffffc000`e4755140 ffffe000`b835c988 00000000`00000000 : Ntfs+0xa6cb8
ffffd000`204f33d0 fffff800`37acd750 : ffffe000`b835c988 ffffe000`b8c6b180 00000000`00000000 fffff800`3799d061 : Ntfs+0x12bf42
ffffd000`204f3520 fffff800`37ac23fd : ffffe000`b835c988 ffffe000`bc406980 ffffe000`bab46740 ffffc000`e1c8bf01 : Ntfs+0x28750
ffffd000`204f35c0 fffff800`37ac276c : ffffe000`b835c988 ffffe000`bc406980 ffffd000`204f3701 00000000`00000201 : Ntfs+0x1d3fd
ffffd000`204f3760 fffff800`3793bcf8 : ffffe000`b8831010 ffffe000`bc406980 ffffe000`bc406980 ffffe000`bc406d20 : Ntfs+0x1d76c
ffffd000`204f3810 fffff800`3793a0b6 : ffffe000`b8eac380 00000000`00000000 ffffe000`bc406980 ffffe000`00000001 : fltmgr!FltpLegacyProcessingAfterPreCallbacksCompleted+0x258
ffffd000`204f38b0 fffff802`275ffd1a : ffffe000`bc406d20 ffffd000`204f3b80 00000000`00000000 00000000`0000000b : fltmgr!FltpDispatch+0xb6
ffffd000`204f3910 fffff802`273677b3 : ffffe000`ba5dcde8 ffffe000`bad9b880 00000000`00000000 fffff6fb`7da00010 : nt!NtReadFile+0x7ca
ffffd000`204f3a90 00007ff9`2528abea : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!setjmpex+0x34b3
00000000`813abe18 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x00007ff9`2528abea




FOLLOWUP_IP: 
nt!NtReadFile+7ca
fffff802`275ffd1a 448bf8          mov     r15d,eax


SYMBOL_STACK_INDEX:  8


SYMBOL_NAME:  nt!NtReadFile+7ca


FOLLOWUP_NAME:  MachineOwner


IMAGE_NAME:  ntkrnlmp.exe


IMAGE_VERSION:  6.3.9600.17041


STACK_COMMAND:  .cxr 0xffffd000204f2910 ; kb


BUCKET_ID:  WRONG_SYMBOLS


FAILURE_BUCKET_ID:  WRONG_SYMBOLS


ANALYSIS_SOURCE:  KM


FAILURE_ID_HASH_STRING:  km:wrong_symbols


FAILURE_ID_HASH:  {70b057e8-2462-896f-28e7-ac72d4d365f8}


Followup: MachineOwner
---------


CPUID:        "Intel(R) Core(TM) i5-4670 CPU @ 3.40GHz"
MaxSpeed:     3400
CurrentSpeed: 3392
[SMBIOS Data Tables v2.7]
[DMI Version - 39]
[2.0 Calling Convention - No]
[Table Size - 3045 bytes]


[BIOS Information (Type 0) - Length 24 - Handle 0000h]
  Vendor                        American Megatrends Inc.
  BIOS Version                  F6
  BIOS Starting Address Segment f000
  BIOS Release Date             01/17/2014
  BIOS ROM Size                 800000
  BIOS Characteristics
       07: - PCI Supported
       11: - Upgradeable FLASH BIOS
       12: - BIOS Shadowing Supported
       15: - CD-Boot Supported
       16: - Selectable Boot Supported
       17: - BIOS ROM Socketed
       19: - EDD Supported
       23: - 1.2MB Floppy Supported
       24: - 720KB Floppy Supported
       25: - 2.88MB Floppy Supported
       26: - Print Screen Device Supported
       27: - Keyboard Services Supported
       28: - Serial Services Supported
       29: - Printer Services Supported
       32: - BIOS Vendor Reserved
  BIOS Characteristic Extensions
       00: - ACPI Supported
       01: - USB Legacy Supported
       08: - BIOS Boot Specification Supported
       10: - Specification Reserved
       11: - Specification Reserved
  BIOS Major Revision           4
  BIOS Minor Revision           6
  EC Firmware Major Revision    255
  EC Firmware Minor Revision    255
[System Information (Type 1) - Length 27 - Handle 0001h]
  Manufacturer                  Gigabyte Technology Co., Ltd.
  Product Name                  H87-D3H
  Version                       To be filled by O.E.M.
  Serial Number                                       
  UUID                          00000000-0000-0000-0000-000000000000
  Wakeup Type                   Power Switch
  SKUNumber                     To be filled by O.E.M.
  Family                        To be filled by O.E.M.
[BaseBoard Information (Type 2) - Length 15 - Handle 0002h]
  Manufacturer                  Gigabyte Technology Co., Ltd.
  Product                       H87-D3H-CF
  Version                       x.x
  Serial Number                                       
  Asset Tag                                           
  Feature Flags                 09h
       -831232224: - (null)
       -831232176: - (null)
  Location                      To be filled by O.E.M.
  Chassis Handle                0003h
  Board Type                    0ah - Processor/Memory Module
  Number of Child Handles       0
[System Enclosure (Type 3) - Length 22 - Handle 0003h]
  Manufacturer                  Gigabyte Technology Co., Ltd.
  Chassis Type                  Desktop
  Version                       To Be Filled By O.E.M.
  Serial Number                                       
  Asset Tag Number                                    
  Bootup State                  Safe
  Power Supply State            Safe
  Thermal State                 Safe
  Security Status               None
  OEM Defined                   0
  Height                        0U
  Number of Power Cords         1
  Number of Contained Elements  0
  Contained Element Size        0
[Cache Information (Type 7) - Length 19 - Handle 0004h]
  Socket Designation            CPU Internal L1
  Cache Configuration           0180h - WB Enabled Int NonSocketed L1
  Maximum Cache Size            0100h - 256K
  Installed Size                0100h - 256K
  Supported SRAM Type           0002h - Unknown 
  Current SRAM Type             0002h - Unknown 
  Cache Speed                   0ns
  Error Correction Type         Multi-Bit ECC
  System Cache Type             Other
  Associativity                 8-way Set-Associative
[Cache Information (Type 7) - Length 19 - Handle 0005h]
  Socket Designation            CPU Internal L2
  Cache Configuration           0181h - WB Enabled Int NonSocketed L2
  Maximum Cache Size            0400h - 1024K
  Installed Size                0400h - 1024K
  Supported SRAM Type           0002h - Unknown 
  Current SRAM Type             0002h - Unknown 
  Cache Speed                   0ns
  Error Correction Type         Multi-Bit ECC
  System Cache Type             Unified
  Associativity                 8-way Set-Associative
[Cache Information (Type 7) - Length 19 - Handle 0006h]
  Socket Designation            CPU Internal L3
  Cache Configuration           0182h - WB Enabled Int NonSocketed L3
  Maximum Cache Size            1800h - 6144K
  Installed Size                1800h - 6144K
  Supported SRAM Type           0002h - Unknown 
  Current SRAM Type             0002h - Unknown 
  Cache Speed                   0ns
  Error Correction Type         Multi-Bit ECC
  System Cache Type             Unified
  Associativity                 Specification Reserved
[Physical Memory Array (Type 16) - Length 23 - Handle 0007h]
  Location                      03h - SystemBoard/Motherboard
  Use                           03h - System Memory
  Memory Error Correction       03h - None
  Maximum Capacity              33554432KB
  Memory Error Inf Handle       [Not Provided]
  Number of Memory Devices      4
[Onboard Devices Information (Type 10) - Length 6 - Handle 0026h]
  Number of Devices             1
  01: Type                      Video [enabled]
  01: Description                  To Be Filled By O.E.M.
[OEM Strings (Type 11) - Length 5 - Handle 0027h]
  Number of Strings             1
   1                            To Be Filled By O.E.M.
[System Configuration Options (Type 12) - Length 5 - Handle 0028h]
[Processor Information (Type 4) - Length 42 - Handle 0041h]
  Socket Designation            SOCKET 0
  Processor Type                Central Processor
  Processor Family              c6h - Specification Reserved
  Processor Manufacturer        Intel
  Processor ID                  c3060300fffbebbf
  Processor Version             Intel(R) Core(TM) i5-4670 CPU @ 3.40GHz
  Processor Voltage             8bh - 1.1V
  External Clock                100MHz
  Max Speed                     7000MHz
  Current Speed                 3600MHz
  Status                        Enabled Populated
  Processor Upgrade             Other
  L1 Cache Handle               0004h
  L2 Cache Handle               0005h
  L3 Cache Handle               0006h
  Serial Number                 [String Not Specified]
  Asset Tag Number                         
  Part Number                   Fill By OEM
[Memory Device (Type 17) - Length 34 - Handle 0042h]
  Physical Memory Array Handle  0007h
  Memory Error Info Handle      [Not Provided]
  Total Width                   0 bits
  Data Width                    0 bits
  Size                          [Not Populated]
  Form Factor                   09h - DIMM
  Device Set                    [None]
  Device Locator                ChannelA-DIMM0
  Bank Locator                  BANK 0
  Memory Type                   02h - Unknown
  Type Detail                   0000h -
  Speed                         0MHz
  Manufacturer                  [Empty]
  Serial Number                        
  Asset Tag Number                        
  Part Number                   [Empty]
[Memory Device (Type 17) - Length 34 - Handle 0043h]
  Physical Memory Array Handle  0007h
  Memory Error Info Handle      [Not Provided]
  Total Width                   64 bits
  Data Width                    64 bits
  Size                          8192MB
  Form Factor                   09h - DIMM
  Device Set                    [None]
  Device Locator                ChannelA-DIMM1
  Bank Locator                  BANK 1
  Memory Type                   18h - Specification Reserved
  Type Detail                   0080h - Synchronous
  Speed                         1600MHz
  Manufacturer                  1315
  Serial Number                         
  Asset Tag Number                        
  Part Number                   BLS8G3D1609DS1S00.
[Memory Device Mapped Address (Type 20) - Length 35 - Handle 0044h]
  Starting Address              00000000h
  Ending Address                007fffffh
  Memory Device Handle          0043h
  Mem Array Mapped Adr Handle   0048h
  Partition Row Position        [Unknown]
  Interleave Position           [Unknown]
  Interleave Data Depth         [Unknown]
[Memory Device (Type 17) - Length 34 - Handle 0045h]
  Physical Memory Array Handle  0007h
  Memory Error Info Handle      [Not Provided]
  Total Width                   0 bits
  Data Width                    0 bits
  Size                          [Not Populated]
  Form Factor                   09h - DIMM
  Device Set                    [None]
  Device Locator                ChannelB-DIMM0
  Bank Locator                  BANK 2
  Memory Type                   02h - Unknown
  Type Detail                   0000h -
  Speed                         0MHz
  Manufacturer                  [Empty]
  Serial Number                        
  Asset Tag Number                        
  Part Number                   [Empty]
[Memory Device (Type 17) - Length 34 - Handle 0046h]
  Physical Memory Array Handle  0007h
  Memory Error Info Handle      [Not Provided]
  Total Width                   64 bits
  Data Width                    64 bits
  Size                          8192MB
  Form Factor                   09h - DIMM
  Device Set                    [None]
  Device Locator                ChannelB-DIMM1
  Bank Locator                  BANK 3
  Memory Type                   18h - Specification Reserved
  Type Detail                   0080h - Synchronous
  Speed                         1600MHz
  Manufacturer                  1315
  Serial Number                         
  Asset Tag Number                        
  Part Number                   BLS8G3D1609DS1S00.
[Memory Device Mapped Address (Type 20) - Length 35 - Handle 0047h]
  Starting Address              00800000h
  Ending Address                00ffffffh
  Memory Device Handle          0046h
  Mem Array Mapped Adr Handle   0048h
  Partition Row Position        [Unknown]
  Interleave Position           [Unknown]
  Interleave Data Depth         [Unknown]
[Memory Array Mapped Address (Type 19) - Length 31 - Handle 0048h]
  Starting Address              00000000h
  Ending Address                00ffffffh
  Memory Array Handle           0007h
  Partition Width               04
start             end                 module name
fffff800`37400000 fffff800`3748a000   ACPI     ACPI.sys     Sat Feb 22 17:43:57 2014 (53089485)
fffff800`375bd000 fffff800`375d5000   acpiex   acpiex.sys   Thu Aug 22 17:07:47 2013 (5215F80B)
fffff800`38acd000 fffff800`38b60000   afd      afd.sys      Thu Aug 22 17:06:50 2013 (5215F7D2)
fffff800`38c10000 fffff800`38c27000   ahcache  ahcache.sys  Thu Aug 22 17:09:54 2013 (5215F88A)
fffff800`39839000 fffff800`39843000   aswHwid  aswHwid.sys  Tue Apr 08 21:13:26 2014 (5344191E)
fffff800`38e00000 fffff800`38e22000   aswMonFlt aswMonFlt.sys Thu Apr 17 16:34:01 2014 (534FB521)
fffff800`38ab3000 fffff800`38acd000   aswRdr2  aswRdr2.sys  Thu Apr 17 16:32:56 2014 (534FB4E0)
fffff800`382a4000 fffff800`382b7000   aswRvrt  aswRvrt.sys  Thu Apr 17 16:34:41 2014 (534FB549)
fffff800`38620000 fffff800`38721000   aswSnx   aswSnx.sys   Mon May 05 13:34:42 2014 (5367461A)
fffff800`38721000 fffff800`3878e000   aswSP    aswSP.sys    Mon May 05 13:41:11 2014 (5367479F)
fffff800`393e7000 fffff800`393ff000   aswStm   aswStm.sys   Mon May 05 13:41:48 2014 (536747C4)
fffff800`38175000 fffff800`381aa000   aswVmm   aswVmm.sys   Thu Apr 17 16:34:55 2014 (534FB557)
fffff960`00ae0000 fffff960`00b3f000   ATMFD    ATMFD.DLL    unavailable (00000000)
fffff800`387ad000 fffff800`387bf000   BasicDisplay BasicDisplay.sys Thu Aug 22 17:09:31 2013 (5215F873)
fffff800`3879f000 fffff800`387ad000   BasicRender BasicRender.sys Sat Feb 22 17:44:02 2014 (5308948A)
fffff800`38797000 fffff800`3879f000   Beep     Beep.SYS     Thu Aug 22 17:10:24 2013 (5215F8A8)
fffff800`37399000 fffff800`373a3000   BOOTVID  BOOTVID.dll  Thu Aug 22 17:10:26 2013 (5215F8AA)
fffff800`39942000 fffff800`39962000   bowser   bowser.sys   Thu Aug 22 17:08:38 2013 (5215F83E)
fffff960`0091b000 fffff960`00956000   cdd      cdd.dll      unavailable (00000000)
fffff800`37e00000 fffff800`37e2e000   cdrom    cdrom.sys    Thu Aug 22 14:16:35 2013 (5215CFEB)
fffff800`37200000 fffff800`37288000   CI       CI.dll       Sat Feb 22 17:42:12 2014 (5308941C)
fffff800`3824e000 fffff800`382a4000   CLASSPNP CLASSPNP.SYS Sat Mar 08 14:57:06 2014 (531AE26A)
fffff800`37301000 fffff800`37362000   CLFS     CLFS.SYS     Wed Mar 19 13:42:20 2014 (53295164)
fffff800`3763f000 fffff800`376ca000   cng      cng.sys      Sat Mar 08 14:55:08 2014 (531AE1F4)
fffff800`38c27000 fffff800`38c36000   CompositeBus CompositeBus.sys Thu Aug 22 17:08:48 2013 (5215F848)
fffff800`38e22000 fffff800`38e32000   condrv   condrv.sys   Thu Aug 22 17:10:17 2013 (5215F8A1)
fffff800`382b7000 fffff800`382cc000   crashdmp crashdmp.sys Thu Aug 22 17:10:03 2013 (5215F893)
fffff800`38d1a000 fffff800`38da8000   csc      csc.sys      Thu Aug 22 17:08:00 2013 (5215F818)
fffff800`38dce000 fffff800`38df4000   dfsc     dfsc.sys     Thu Mar 06 14:52:50 2014 (53183E6A)
fffff800`38232000 fffff800`3824e000   disk     disk.sys     Thu Aug 22 17:09:47 2013 (5215F883)
fffff800`397b4000 fffff800`397d0000   drmk     drmk.sys     Thu Aug 22 17:09:24 2013 (5215F86C)
fffff800`395d4000 fffff800`395e0000   dump_diskdump dump_diskdump.sys Thu Aug 22 17:10:18 2013 (5215F8A2)
fffff800`393ad000 fffff800`393c3000   dump_dumpfve dump_dumpfve.sys Sat Feb 22 17:44:48 2014 (530894B8)
fffff800`395e0000 fffff800`395fd000   dump_storahci dump_storahci.sys Thu Aug 22 17:10:39 2013 (5215F8B7)
fffff800`38863000 fffff800`389e4000   dxgkrnl  dxgkrnl.sys  Thu Mar 06 14:52:58 2014 (53183E72)
fffff800`38800000 fffff800`38861000   dxgmms1  dxgmms1.sys  Thu Mar 06 14:52:14 2014 (53183E46)
fffff800`39321000 fffff800`39395000   e1i63x64 e1i63x64.sys Wed Mar 20 13:07:29 2013 (51496739)
fffff800`396ce000 fffff800`39707000   fastfat  fastfat.SYS  Thu Aug 22 17:10:18 2013 (5215F8A2)
fffff800`37995000 fffff800`379ab000   fileinfo fileinfo.sys Sat Feb 22 17:43:10 2014 (53089456)
fffff800`37939000 fffff800`37995000   fltmgr   fltmgr.sys   Sat Feb 22 17:45:40 2014 (530894EC)
fffff800`37cc7000 fffff800`37cd2000   Fs_Rec   Fs_Rec.sys   Thu Aug 22 14:16:33 2013 (5215CFE9)
fffff800`382d2000 fffff800`38367000   fvevol   fvevol.sys   Sat Feb 22 17:41:54 2014 (5308940A)
fffff800`380e4000 fffff800`38150000   fwpkclnt fwpkclnt.sys Tue Mar 04 14:58:07 2014 (53159CA7)
fffff800`3947b000 fffff800`39481c00   GEARAspiWDM GEARAspiWDM.sys Fri May 04 01:26:17 2012 (4FA2E2E1)
fffff802`27991000 fffff802`27a01000   hal      hal.dll      Sat Feb 22 17:45:53 2014 (530894F9)
fffff800`39258000 fffff800`39271000   HDAudBus HDAudBus.sys Thu Aug 22 17:08:37 2013 (5215F83D)
fffff800`39707000 fffff800`3976d000   HdAudio  HdAudio.sys  Thu Aug 22 17:08:19 2013 (5215F82B)
fffff800`3958a000 fffff800`395a9000   HIDCLASS HIDCLASS.SYS Thu Mar 06 14:54:40 2014 (53183ED8)
fffff800`39638000 fffff800`3963ff00   HIDPARSE HIDPARSE.SYS Thu Aug 22 17:10:26 2013 (5215F8AA)
fffff800`3962a000 fffff800`39638000   hidusb   hidusb.sys   Thu Mar 06 14:54:14 2014 (53183EBE)
fffff800`39848000 fffff800`39942000   HTTP     HTTP.sys     Tue Jan 28 01:18:02 2014 (52E6B7F2)
fffff800`38e34000 fffff800`39258000   igdkmd64 igdkmd64.sys Thu Jan 23 04:12:16 2014 (52E04948)
fffff800`38217000 fffff800`38226000   intelpep intelpep.sys Sat Nov 09 14:15:55 2013 (527DF643)
fffff800`39482000 fffff800`394a0000   intelppm intelppm.sys Thu Aug 22 14:16:35 2013 (5215CFEB)
fffff800`394fc000 fffff800`39508000   iwdbus   iwdbus.sys   Wed Dec 18 04:17:38 2013 (52B0D48A)
fffff800`397ec000 fffff800`397fc000   kbdclass kbdclass.sys Thu Aug 22 17:09:23 2013 (5215F86B)
fffff800`39640000 fffff800`3964e000   kbdhid   kbdhid.sys   Thu Aug 22 17:09:13 2013 (5215F861)
fffff802`26675000 fffff802`2667e000   kd       kd.dll       Thu Aug 22 17:10:43 2013 (5215F8BB)
fffff800`38c36000 fffff800`38c41000   kdnic    kdnic.sys    Thu Aug 22 17:08:26 2013 (5215F832)
fffff800`394ad000 fffff800`394fc000   ks       ks.sys       Sat Feb 22 17:44:40 2014 (530894B0)
fffff800`37c9b000 fffff800`37cb7000   ksecdd   ksecdd.sys   Sat Sep 21 13:29:44 2013 (523D51F0)
fffff800`37600000 fffff800`37631000   ksecpkg  ksecpkg.sys  Sat Mar 08 14:54:07 2014 (531AE1B7)
fffff800`397d0000 fffff800`397d5300   ksthunk  ksthunk.sys  Thu Aug 22 17:09:31 2013 (5215F873)
fffff800`38c52000 fffff800`38c66000   lltdio   lltdio.sys   Thu Aug 22 17:06:18 2013 (5215F7B2)
fffff800`393c3000 fffff800`393e7000   luafv    luafv.sys    Sat Feb 22 17:44:25 2014 (530894A1)
fffff800`3728d000 fffff800`372f3000   mcupdate_GenuineIntel mcupdate_GenuineIntel.dll Thu Aug 22 17:10:16 2013 (5215F8A0)
fffff800`395c6000 fffff800`395d4000   monitor  monitor.sys  Thu Aug 22 17:06:37 2013 (5215F7C5)
fffff800`395b6000 fffff800`395c6000   mouclass mouclass.sys Thu Aug 22 17:09:13 2013 (5215F861)
fffff800`395a9000 fffff800`395b6000   mouhid   mouhid.sys   Thu Aug 22 17:09:13 2013 (5215F861)
fffff800`37888000 fffff800`378a3000   mountmgr mountmgr.sys Thu Aug 22 17:10:04 2013 (5215F894)
fffff800`39962000 fffff800`39979000   mpsdrv   mpsdrv.sys   Thu Aug 22 17:06:06 2013 (5215F7A6)
fffff800`3aa49000 fffff800`3aa71000   mrxdav   mrxdav.sys   Thu Mar 06 14:52:04 2014 (53183E3C)
fffff800`39979000 fffff800`399e6000   mrxsmb   mrxsmb.sys   Thu Mar 06 14:50:21 2014 (53183DD5)
fffff800`38bb5000 fffff800`38c00000   mrxsmb10 mrxsmb10.sys Thu Mar 06 14:49:36 2014 (53183DA8)
fffff800`39800000 fffff800`39839000   mrxsmb20 mrxsmb20.sys Sat Sep 21 13:27:59 2013 (523D5187)
fffff800`387d3000 fffff800`387df000   Msfs     Msfs.SYS     Thu Aug 22 17:10:24 2013 (5215F8A8)
fffff800`376ca000 fffff800`376d4000   msisadrv msisadrv.sys Thu Aug 22 17:09:03 2013 (5215F857)
fffff800`3ab75000 fffff800`3ab8b000   mslldp   mslldp.sys   Thu Aug 22 17:06:07 2013 (5215F7A7)
fffff800`373a3000 fffff800`37400000   msrpc    msrpc.sys    Thu Aug 22 17:09:22 2013 (5215F86A)
fffff800`38dc2000 fffff800`38dce000   mssmbios mssmbios.sys Thu Aug 22 17:09:41 2013 (5215F87D)
fffff800`38200000 fffff800`38217000   mup      mup.sys      Thu Aug 22 17:10:28 2013 (5215F8AC)
fffff800`37cd2000 fffff800`37dea000   ndis     ndis.sys     Sat Feb 22 17:42:58 2014 (5308944A)
fffff800`394a0000 fffff800`394ab000   NdisVirtualBus NdisVirtualBus.sys Thu Aug 22 17:06:25 2013 (5215F7B9)
fffff800`38c7e000 fffff800`38c9b000   Ndu      Ndu.sys      Thu Aug 22 17:05:42 2013 (5215F78E)
fffff800`38b8a000 fffff800`38b9b000   netbios  netbios.sys  Thu Aug 22 17:08:58 2013 (5215F852)
fffff800`38a67000 fffff800`38ab3000   netbt    netbt.sys    Thu Aug 22 17:07:01 2013 (5215F7DD)
fffff800`37a00000 fffff800`37a79000   NETIO    NETIO.SYS    Thu Aug 22 17:07:08 2013 (5215F7E4)
fffff800`387bf000 fffff800`387d3000   Npfs     Npfs.SYS     Thu Aug 22 17:10:25 2013 (5215F8A9)
fffff800`38db6000 fffff800`38dc2000   npsvctrig npsvctrig.sys Thu Aug 22 17:08:22 2013 (5215F82E)
fffff800`38da8000 fffff800`38db6000   nsiproxy nsiproxy.sys Thu Aug 22 17:06:34 2013 (5215F7C2)
fffff802`27208000 fffff802`27991000   nt       ntkrnlmp.exe Thu Mar 06 10:48:55 2014 (5318053F)
fffff800`37aa5000 fffff800`37c9b000   Ntfs     Ntfs.sys     Wed Mar 19 09:28:52 2014 (532915FC)
fffff800`3878e000 fffff800`38797000   Null     Null.SYS     Thu Aug 22 17:10:24 2013 (5215F8A8)
fffff800`38b60000 fffff800`38b8a000   pacer    pacer.sys    Thu Aug 22 17:06:06 2013 (5215F7A6)
fffff800`37745000 fffff800`3775d000   partmgr  partmgr.sys  Thu Aug 22 17:10:20 2013 (5215F8A4)
fffff800`376d4000 fffff800`3771c000   pci      pci.sys      Sat Feb 22 17:42:41 2014 (53089439)
fffff800`37cb7000 fffff800`37cc7000   pcw      pcw.sys      Thu Aug 22 14:16:34 2013 (5215CFEA)
fffff800`37729000 fffff800`37745000   pdc      pdc.sys      Fri Nov 01 10:28:42 2013 (52733502)
fffff800`3ac12000 fffff800`3acbb000   peauth   peauth.sys   Sat Feb 22 17:39:37 2014 (53089381)
fffff800`3976d000 fffff800`397b4000   portcls  portcls.sys  Sat Feb 22 17:41:25 2014 (530893ED)
fffff800`37384000 fffff800`37399000   PSHED    PSHED.dll    Sat Sep 14 19:27:19 2013 (52346B3F)
fffff800`38caa000 fffff800`38d1a000   rdbss    rdbss.sys    Tue Dec 17 12:51:22 2013 (52AFFB72)
fffff800`39508000 fffff800`39513000   rdpbus   rdpbus.sys   Thu Aug 22 17:08:52 2013 (5215F84C)
fffff800`383b7000 fffff800`383fd000   rdyboost rdyboost.sys Sat Feb 22 17:43:40 2014 (53089474)
fffff800`38c66000 fffff800`38c7e000   rspndr   rspndr.sys   Thu Aug 22 17:06:34 2013 (5215F7C2)
fffff800`3acbb000 fffff800`3acc6000   secdrv   secdrv.SYS   Wed Sep 13 18:48:38 2006 (4508052E)
fffff800`39314000 fffff800`39321000   serenum  serenum.sys  Thu Aug 22 17:10:17 2013 (5215F8A1)
fffff800`38b9b000 fffff800`38bb5000   serial   serial.sys   Thu Aug 22 17:10:08 2013 (5215F898)
fffff800`3775d000 fffff800`377be000   spaceport spaceport.sys Sat Feb 22 17:42:32 2014 (53089430)
fffff800`3aab0000 fffff800`3ab48000   srv      srv.sys      Sat Oct 05 16:31:15 2013 (524FF17B)
fffff800`3ad1b000 fffff800`3adc9000   srv2     srv2.sys     Thu Mar 06 14:52:30 2014 (53183E56)
fffff800`3acc6000 fffff800`3ad09000   srvnet   srvnet.sys   Thu Mar 06 14:50:29 2014 (53183DDD)
fffff800`378a3000 fffff800`378c0000   storahci storahci.sys Thu Aug 22 17:10:39 2013 (5215F8B7)
fffff800`378c0000 fffff800`3791f000   storport storport.sys Sat Feb 22 17:43:42 2014 (53089476)
fffff800`394ab000 fffff800`394ac600   swenum   swenum.sys   Thu Aug 22 17:09:29 2013 (5215F871)
fffff800`37e6f000 fffff800`380e4000   tcpip    tcpip.sys    Tue Mar 04 15:01:29 2014 (53159D71)
fffff800`3ad09000 fffff800`3ad1b000   tcpipreg tcpipreg.sys Thu Mar 06 14:49:59 2014 (53183DBF)
fffff800`38600000 fffff800`3860e000   TDI      TDI.SYS      Thu Aug 22 17:09:01 2013 (5215F855)
fffff800`387df000 fffff800`387ff000   tdx      tdx.sys      Thu Aug 22 17:06:34 2013 (5215F7C2)
fffff800`392f8000 fffff800`39314000   TeeDriverx64 TeeDriverx64.sys Thu Sep 05 23:32:18 2013 (5228C72A)
fffff800`37362000 fffff800`37384000   tm       tm.sys       Thu Aug 22 17:09:33 2013 (5215F875)
fffff960`007c1000 fffff960`007ca000   TSDDD    TSDDD.dll    unavailable (00000000)
fffff800`3ab48000 fffff800`3ab75000   tunnel   tunnel.sys   Thu Aug 22 17:05:45 2013 (5215F791)
fffff800`397d6000 fffff800`397ec000   uaspstor uaspstor.sys Thu Aug 22 17:07:58 2013 (5215F816)
fffff800`392c6000 fffff800`392f8000   ucx01000 ucx01000.sys Sat Feb 22 17:41:33 2014 (530893F5)
fffff800`38c41000 fffff800`38c52000   umbus    umbus.sys    Thu Aug 22 17:08:59 2013 (5215F853)
fffff800`3aba1000 fffff800`3abab000   umpass   umpass.sys   Thu Aug 22 17:08:58 2013 (5215F852)
fffff800`39600000 fffff800`3962a000   usbccgp  usbccgp.sys  Wed Oct 23 13:47:41 2013 (52678625)
fffff800`3957e000 fffff800`3958a000   USBD     USBD.SYS     Thu Aug 22 17:10:22 2013 (5215F8A6)
fffff800`39395000 fffff800`393ad000   usbehci  usbehci.sys  Thu Aug 22 17:09:15 2013 (5215F863)
fffff800`39513000 fffff800`3957e000   usbhub   usbhub.sys   Thu Aug 22 17:08:33 2013 (5215F839)
fffff800`39656000 fffff800`396ce000   UsbHub3  UsbHub3.sys  Sat Mar 08 14:53:48 2014 (531AE1A4)
fffff800`3940c000 fffff800`3947b000   USBPORT  USBPORT.SYS  Thu Aug 22 17:09:40 2013 (5215F87C)
fffff800`39271000 fffff800`392c6000   USBXHCI  USBXHCI.SYS  Sat Feb 22 17:41:27 2014 (530893EF)
fffff800`3771c000 fffff800`37729000   vdrvroot vdrvroot.sys Thu Aug 22 17:08:49 2013 (5215F849)
fffff800`377be000 fffff800`377d3000   volmgr   volmgr.sys   Thu Aug 22 17:09:53 2013 (5215F889)
fffff800`37829000 fffff800`37888000   volmgrx  volmgrx.sys  Thu Aug 22 17:10:23 2013 (5215F8A7)
fffff800`38367000 fffff800`383b7000   volsnap  volsnap.sys  Sat Feb 22 17:45:51 2014 (530894F7)
fffff800`389e4000 fffff800`389f6000   watchdog watchdog.sys Sat Feb 22 17:44:39 2014 (530894AF)
fffff800`374dd000 fffff800`375ac000   Wdf01000 Wdf01000.sys Thu Aug 22 17:08:56 2013 (5215F850)
fffff800`375ac000 fffff800`375bd000   WDFLDR   WDFLDR.SYS   Thu Aug 22 17:09:03 2013 (5215F857)
fffff800`372f3000 fffff800`37301000   werkernel werkernel.sys Thu Aug 22 17:10:24 2013 (5215F8A8)
fffff800`38150000 fffff800`38175000   wfplwfs  wfplwfs.sys  Sat Mar 08 14:52:45 2014 (531AE165)
fffff960`001ae000 fffff960`005c8000   win32k   win32k.sys   unavailable (00000000)
fffff800`3748a000 fffff800`37494000   WMILIB   WMILIB.SYS   Thu Aug 22 17:10:23 2013 (5215F8A7)
fffff800`379ab000 fffff800`379d6000   Wof      Wof.sys      Thu Mar 13 13:57:29 2014 (53216BF1)
fffff800`3aa3e000 fffff800`3aa49000   WpdUpFltr WpdUpFltr.sys Thu Aug 22 17:08:45 2013 (5215F845)
fffff800`375d5000 fffff800`375e0000   WppRecorder WppRecorder.sys Thu Aug 22 17:09:40 2013 (5215F87C)
fffff800`3abc9000 fffff800`3abea000   WudfPf   WudfPf.sys   Thu Aug 22 17:07:21 2013 (5215F7F1)
fffff800`3aa00000 fffff800`3aa3e000   WUDFRd   WUDFRd.sys   Thu Aug 22 17:06:50 2013 (5215F7D2)


Unloaded modules:
fffff800`3aa86000 fffff800`3aa92000   hiber_storpo
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0000C000
fffff800`3aa92000 fffff800`3aaaf000   hiber_storah
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0001D000
fffff800`3ab8b000 fffff800`3aba1000   hiber_dumpfv
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  00016000
fffff800`3aa7c000 fffff800`3aa86000   umpass.sys
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0000A000
fffff800`3abea000 fffff800`3abf6000   hiber_storpo
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0000C000
fffff800`3aa49000 fffff800`3aa66000   hiber_storah
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0001D000
fffff800`3aa66000 fffff800`3aa7c000   hiber_dumpfv
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  00016000
fffff800`3abbe000 fffff800`3abc8000   umpass.sys
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0000A000
fffff800`3aa9c000 fffff800`3aaa8000   hiber_storpo
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0000C000
fffff800`3ab8b000 fffff800`3aba8000   hiber_storah
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0001D000
fffff800`3aba8000 fffff800`3abbe000   hiber_dumpfv
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  00016000
fffff800`3aa92000 fffff800`3aa9c000   umpass.sys
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0000A000
fffff800`3aa53000 fffff800`3aa5f000   hiber_storpo
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0000C000
fffff800`3aa5f000 fffff800`3aa7c000   hiber_storah
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0001D000
fffff800`3aa7c000 fffff800`3aa92000   hiber_dumpfv
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  00016000
fffff800`3aa49000 fffff800`3aa53000   umpass.sys
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0000A000
fffff800`3ab8b000 fffff800`3abc9000   WUDFRd.sys
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0003E000
fffff800`38226000 fffff800`38232000   dump_storpor
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0000C000
fffff800`381aa000 fffff800`381c7000   dump_storahc
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0001D000
fffff800`381c7000 fffff800`381dd000   dump_dumpfve
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  00016000
fffff800`3791f000 fffff800`37939000   EhStorClass.
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0001A000
fffff800`38c00000 fffff800`38c10000   dam.sys 
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  00010000
fffff800`38226000 fffff800`38232000   hwpolicy.sys
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0000C000
quit:
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
**************************Sat Jun  7 01:23:37.789 2014 (UTC + 5:30)**************************


Opened log file 'C:\Users\BLUEEL~1\AppData\Local\Temp\SysnativeBSODApps\20164\dmps\outkdOutput6.txt'


Microsoft (R) Windows Debugger Version 6.3.9600.16384 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.




Loading Dump File [C:\SysnativeBSODApps\060614-5125-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available




************* Symbol Path validation summary **************
Response                         Time (ms)     Location
Deferred                                       srv*c:\symbols*http://msdl.microsoft.com/download/symbols
Symbol search path is: srv*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is: 
*** ERROR: Symbol file could not be found.  Defaulted to export symbols for ntkrnlmp.exe - 
Windows 8 Kernel Version 9600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 9600.17041.amd64fre.winblue_gdr.140305-1710
Machine Name:
Kernel base = 0xfffff801`be616000 PsLoadedModuleList = 0xfffff801`be8e02d0
Debug session time: Sat Jun  7 01:23:37.789 2014 (UTC + 5:30)
System Uptime: 0 days 1:32:28.481
*** ERROR: Symbol file could not be found.  Defaulted to export symbols for ntkrnlmp.exe - 
Loading Kernel Symbols
.


Press ctrl-c (cdb, kd, ntsd) or ctrl-break (windbg) to abort symbol loads that take too long.
Run !sym noisy before .reload to track down problems loading symbols.


..............................................................
................................................................
........................
Loading User Symbols
Loading unloaded module list
.......


************* Symbol Loading Error Summary **************
Module name            Error
ntkrnlmp               The system cannot find the file specified


You can troubleshoot most symbol related issues by turning on symbol loading diagnostics (!sym noisy) and repeating the command that caused symbols to be loaded.
You should also verify that your symbol search path (.sympath) is correct.
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************


Use !analyze -v to get detailed debugging information.


BugCheck 1E, {ffffffffc0000005, fffff8018b544c1a, ffffd001e9f85748, ffffd001e9f84f50}


*** WARNING: Unable to verify timestamp for e1i63x64.sys
*** ERROR: Module load completed but symbols could not be loaded for e1i63x64.sys
***** Kernel symbols are WRONG. Please fix symbols to do analysis.


*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!KPRCB                                      ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!KPRCB                                      ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_MMPTE                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_MMPTE                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_MMPTE                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
Probably caused by : e1i63x64.sys ( e1i63x64+4fc1a )


Followup: MachineOwner
---------


3: kd> !analyze -v; !sysinfo cpuspeed; !sysinfo SMBIOS; lmtsmn; q
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************


KMODE_EXCEPTION_NOT_HANDLED (1e)
This is a very common bugcheck.  Usually the exception address pinpoints
the driver/function that caused the problem.  Always note this address
as well as the link date of the driver/image that contains this address.
Arguments:
Arg1: ffffffffc0000005, The exception code that was not handled
Arg2: fffff8018b544c1a, The address that the exception occurred at
Arg3: ffffd001e9f85748, Parameter 0 of the exception
Arg4: ffffd001e9f84f50, Parameter 1 of the exception


Debugging Details:
------------------


***** Kernel symbols are WRONG. Please fix symbols to do analysis.


*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!KPRCB                                      ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!KPRCB                                      ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_MMPTE                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_MMPTE                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_MMPTE                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************


ADDITIONAL_DEBUG_TEXT:  


You can run '.symfix; .reload' to try to fix the symbol path and load symbols.


FAULTING_MODULE: fffff801be616000 nt


DEBUG_FLR_IMAGE_TIMESTAMP:  51496739


WRITE_ADDRESS: unable to get nt!MmSpecialPoolStart
unable to get nt!MmSpecialPoolEnd
unable to get nt!MmPagedPoolEnd
unable to get nt!MmNonPagedPoolStart
unable to get nt!MmSizeOfNonPagedPoolInBytes
 ffffd001e9f84f50 


EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.


FAULTING_IP: 
e1i63x64+4fc1a
fffff801`8b544c1a f30f6f4402f0    movdqu  xmm0,xmmword ptr [rdx+rax-10h]


EXCEPTION_PARAMETER1:  ffffd001e9f85748


EXCEPTION_PARAMETER2:  ffffd001e9f84f50


BUGCHECK_STR:  0x1E_c0000005


CUSTOMER_CRASH_COUNT:  1


DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT


CURRENT_IRQL:  0


ANALYSIS_VERSION: 6.3.9600.16384 (debuggers(dbg).130821-1623) amd64fre


LAST_CONTROL_TRANSFER:  from fffff801be7f16f7 to fffff801be769fa0


STACK_TEXT:  
ffffd001`e9f84728 fffff801`be7f16f7 : 00000000`0000001e ffffffff`c0000005 fffff801`8b544c1a ffffd001`e9f85748 : nt!KeBugCheckEx
ffffd001`e9f84730 fffff801`be77b296 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KeRegisterNmiCallback+0x113
ffffd001`e9f84770 fffff801`be759116 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!CcTestControl+0x404a
ffffd001`e9f847b0 fffff801`be7714ed : 00000000`00000000 ffffd001`e9f84950 ffffd001`e9f85748 ffffd001`e9f84950 : nt!_C_specific_handler+0x86
ffffd001`e9f84820 fffff801`be6fb105 : 00000000`00000001 fffff801`be616000 ffffd001`e9f85700 00000000`00000000 : nt!_chkstk+0x5d
ffffd001`e9f84850 fffff801`be6f9fbf : ffffd001`e9f85748 ffffd001`e9f85450 ffffd001`e9f85748 00000000`00000080 : nt!ExRaiseStatus+0x211
ffffd001`e9f84f20 fffff801`be775bc2 : 00000000`00000001 00000000`00000002 00000000`00000000 00000000`00000000 : nt!RtlAreBitsClear+0xc63
ffffd001`e9f85610 fffff801`be774314 : 00000000`00000000 ffffe000`9c87b000 ffffffff`ffd01000 ffffd001`e9f857f0 : nt!setjmpex+0x38c2
ffffd001`e9f857f0 fffff801`8b544c1a : fffff801`8b51205a ffffe000`9c87b000 00000000`00002000 00000000`00000000 : nt!setjmpex+0x2014
ffffd001`e9f85988 fffff801`8b51205a : ffffe000`9c87b000 00000000`00002000 00000000`00000000 00000000`00000000 : e1i63x64+0x4fc1a
ffffd001`e9f85990 ffffe000`9c87b000 : 00000000`00002000 00000000`00000000 00000000`00000000 00000000`000000a0 : e1i63x64+0x1d05a
ffffd001`e9f85998 00000000`00002000 : 00000000`00000000 00000000`00000000 00000000`000000a0 ffffe000`9db5b6f0 : 0xffffe000`9c87b000
ffffd001`e9f859a0 00000000`00000000 : 00000000`00000000 00000000`000000a0 ffffe000`9db5b6f0 00000000`00000000 : 0x2000




STACK_COMMAND:  kb


FOLLOWUP_IP: 
e1i63x64+4fc1a
fffff801`8b544c1a f30f6f4402f0    movdqu  xmm0,xmmword ptr [rdx+rax-10h]


SYMBOL_STACK_INDEX:  9


SYMBOL_NAME:  e1i63x64+4fc1a


FOLLOWUP_NAME:  MachineOwner


MODULE_NAME: e1i63x64


IMAGE_NAME:  e1i63x64.sys


BUCKET_ID:  WRONG_SYMBOLS


FAILURE_BUCKET_ID:  WRONG_SYMBOLS


ANALYSIS_SOURCE:  KM


FAILURE_ID_HASH_STRING:  km:wrong_symbols


FAILURE_ID_HASH:  {70b057e8-2462-896f-28e7-ac72d4d365f8}


Followup: MachineOwner
---------


CPUID:        "Intel(R) Core(TM) i5-4670 CPU @ 3.40GHz"
MaxSpeed:     3400
CurrentSpeed: 3392
[SMBIOS Data Tables v2.7]
[DMI Version - 39]
[2.0 Calling Convention - No]
[Table Size - 3045 bytes]


[BIOS Information (Type 0) - Length 24 - Handle 0000h]
  Vendor                        American Megatrends Inc.
  BIOS Version                  F6
  BIOS Starting Address Segment f000
  BIOS Release Date             01/17/2014
  BIOS ROM Size                 800000
  BIOS Characteristics
       07: - PCI Supported
       11: - Upgradeable FLASH BIOS
       12: - BIOS Shadowing Supported
       15: - CD-Boot Supported
       16: - Selectable Boot Supported
       17: - BIOS ROM Socketed
       19: - EDD Supported
       23: - 1.2MB Floppy Supported
       24: - 720KB Floppy Supported
       25: - 2.88MB Floppy Supported
       26: - Print Screen Device Supported
       27: - Keyboard Services Supported
       28: - Serial Services Supported
       29: - Printer Services Supported
       32: - BIOS Vendor Reserved
  BIOS Characteristic Extensions
       00: - ACPI Supported
       01: - USB Legacy Supported
       08: - BIOS Boot Specification Supported
       10: - Specification Reserved
       11: - Specification Reserved
  BIOS Major Revision           4
  BIOS Minor Revision           6
  EC Firmware Major Revision    255
  EC Firmware Minor Revision    255
[System Information (Type 1) - Length 27 - Handle 0001h]
  Manufacturer                  Gigabyte Technology Co., Ltd.
  Product Name                  H87-D3H
  Version                       To be filled by O.E.M.
  Serial Number                                       
  UUID                          00000000-0000-0000-0000-000000000000
  Wakeup Type                   Power Switch
  SKUNumber                     To be filled by O.E.M.
  Family                        To be filled by O.E.M.
[BaseBoard Information (Type 2) - Length 15 - Handle 0002h]
  Manufacturer                  Gigabyte Technology Co., Ltd.
  Product                       H87-D3H-CF
  Version                       x.x
  Serial Number                                       
  Asset Tag                                           
  Feature Flags                 09h
       -831232224: - (null)
       -831232176: - (null)
  Location                      To be filled by O.E.M.
  Chassis Handle                0003h
  Board Type                    0ah - Processor/Memory Module
  Number of Child Handles       0
[System Enclosure (Type 3) - Length 22 - Handle 0003h]
  Manufacturer                  Gigabyte Technology Co., Ltd.
  Chassis Type                  Desktop
  Version                       To Be Filled By O.E.M.
  Serial Number                                       
  Asset Tag Number                                    
  Bootup State                  Safe
  Power Supply State            Safe
  Thermal State                 Safe
  Security Status               None
  OEM Defined                   0
  Height                        0U
  Number of Power Cords         1
  Number of Contained Elements  0
  Contained Element Size        0
[Cache Information (Type 7) - Length 19 - Handle 0004h]
  Socket Designation            CPU Internal L1
  Cache Configuration           0180h - WB Enabled Int NonSocketed L1
  Maximum Cache Size            0100h - 256K
  Installed Size                0100h - 256K
  Supported SRAM Type           0002h - Unknown 
  Current SRAM Type             0002h - Unknown 
  Cache Speed                   0ns
  Error Correction Type         Multi-Bit ECC
  System Cache Type             Other
  Associativity                 8-way Set-Associative
[Cache Information (Type 7) - Length 19 - Handle 0005h]
  Socket Designation            CPU Internal L2
  Cache Configuration           0181h - WB Enabled Int NonSocketed L2
  Maximum Cache Size            0400h - 1024K
  Installed Size                0400h - 1024K
  Supported SRAM Type           0002h - Unknown 
  Current SRAM Type             0002h - Unknown 
  Cache Speed                   0ns
  Error Correction Type         Multi-Bit ECC
  System Cache Type             Unified
  Associativity                 8-way Set-Associative
[Cache Information (Type 7) - Length 19 - Handle 0006h]
  Socket Designation            CPU Internal L3
  Cache Configuration           0182h - WB Enabled Int NonSocketed L3
  Maximum Cache Size            1800h - 6144K
  Installed Size                1800h - 6144K
  Supported SRAM Type           0002h - Unknown 
  Current SRAM Type             0002h - Unknown 
  Cache Speed                   0ns
  Error Correction Type         Multi-Bit ECC
  System Cache Type             Unified
  Associativity                 Specification Reserved
[Physical Memory Array (Type 16) - Length 23 - Handle 0007h]
  Location                      03h - SystemBoard/Motherboard
  Use                           03h - System Memory
  Memory Error Correction       03h - None
  Maximum Capacity              33554432KB
  Memory Error Inf Handle       [Not Provided]
  Number of Memory Devices      4
[Onboard Devices Information (Type 10) - Length 6 - Handle 0026h]
  Number of Devices             1
  01: Type                      Video [enabled]
  01: Description                  To Be Filled By O.E.M.
[OEM Strings (Type 11) - Length 5 - Handle 0027h]
  Number of Strings             1
   1                            To Be Filled By O.E.M.
[System Configuration Options (Type 12) - Length 5 - Handle 0028h]
[Processor Information (Type 4) - Length 42 - Handle 0041h]
  Socket Designation            SOCKET 0
  Processor Type                Central Processor
  Processor Family              c6h - Specification Reserved
  Processor Manufacturer        Intel
  Processor ID                  c3060300fffbebbf
  Processor Version             Intel(R) Core(TM) i5-4670 CPU @ 3.40GHz
  Processor Voltage             8bh - 1.1V
  External Clock                100MHz
  Max Speed                     7000MHz
  Current Speed                 3600MHz
  Status                        Enabled Populated
  Processor Upgrade             Other
  L1 Cache Handle               0004h
  L2 Cache Handle               0005h
  L3 Cache Handle               0006h
  Serial Number                 [String Not Specified]
  Asset Tag Number                         
  Part Number                   Fill By OEM
[Memory Device (Type 17) - Length 34 - Handle 0042h]
  Physical Memory Array Handle  0007h
  Memory Error Info Handle      [Not Provided]
  Total Width                   0 bits
  Data Width                    0 bits
  Size                          [Not Populated]
  Form Factor                   09h - DIMM
  Device Set                    [None]
  Device Locator                ChannelA-DIMM0
  Bank Locator                  BANK 0
  Memory Type                   02h - Unknown
  Type Detail                   0000h -
  Speed                         0MHz
  Manufacturer                  [Empty]
  Serial Number                        
  Asset Tag Number                        
  Part Number                   [Empty]
[Memory Device (Type 17) - Length 34 - Handle 0043h]
  Physical Memory Array Handle  0007h
  Memory Error Info Handle      [Not Provided]
  Total Width                   64 bits
  Data Width                    64 bits
  Size                          8192MB
  Form Factor                   09h - DIMM
  Device Set                    [None]
  Device Locator                ChannelA-DIMM1
  Bank Locator                  BANK 1
  Memory Type                   18h - Specification Reserved
  Type Detail                   0080h - Synchronous
  Speed                         1600MHz
  Manufacturer                  1315
  Serial Number                         
  Asset Tag Number                        
  Part Number                   BLS8G3D1609DS1S00.
[Memory Device Mapped Address (Type 20) - Length 35 - Handle 0044h]
  Starting Address              00000000h
  Ending Address                007fffffh
  Memory Device Handle          0043h
  Mem Array Mapped Adr Handle   0048h
  Partition Row Position        [Unknown]
  Interleave Position           [Unknown]
  Interleave Data Depth         [Unknown]
[Memory Device (Type 17) - Length 34 - Handle 0045h]
  Physical Memory Array Handle  0007h
  Memory Error Info Handle      [Not Provided]
  Total Width                   0 bits
  Data Width                    0 bits
  Size                          [Not Populated]
  Form Factor                   09h - DIMM
  Device Set                    [None]
  Device Locator                ChannelB-DIMM0
  Bank Locator                  BANK 2
  Memory Type                   02h - Unknown
  Type Detail                   0000h -
  Speed                         0MHz
  Manufacturer                  [Empty]
  Serial Number                        
  Asset Tag Number                        
  Part Number                   [Empty]
[Memory Device (Type 17) - Length 34 - Handle 0046h]
  Physical Memory Array Handle  0007h
  Memory Error Info Handle      [Not Provided]
  Total Width                   64 bits
  Data Width                    64 bits
  Size                          8192MB
  Form Factor                   09h - DIMM
  Device Set                    [None]
  Device Locator                ChannelB-DIMM1
  Bank Locator                  BANK 3
  Memory Type                   18h - Specification Reserved
  Type Detail                   0080h - Synchronous
  Speed                         1600MHz
  Manufacturer                  1315
  Serial Number                         
  Asset Tag Number                        
  Part Number                   BLS8G3D1609DS1S00.
[Memory Device Mapped Address (Type 20) - Length 35 - Handle 0047h]
  Starting Address              00800000h
  Ending Address                00ffffffh
  Memory Device Handle          0046h
  Mem Array Mapped Adr Handle   0048h
  Partition Row Position        [Unknown]
  Interleave Position           [Unknown]
  Interleave Data Depth         [Unknown]
[Memory Array Mapped Address (Type 19) - Length 31 - Handle 0048h]
  Starting Address              00000000h
  Ending Address                00ffffffh
  Memory Array Handle           0007h
  Partition Width               04
start             end                 module name
fffff801`898b1000 fffff801`8993b000   ACPI     ACPI.sys     Sat Feb 22 17:43:57 2014 (53089485)
fffff801`89754000 fffff801`8976c000   acpiex   acpiex.sys   Thu Aug 22 17:07:47 2013 (5215F80B)
fffff801`8ad4e000 fffff801`8ade1000   afd      afd.sys      Thu Aug 22 17:06:50 2013 (5215F7D2)
fffff801`8afbd000 fffff801`8afd4000   ahcache  ahcache.sys  Thu Aug 22 17:09:54 2013 (5215F88A)
fffff801`8b9cf000 fffff801`8b9d9000   aswHwid  aswHwid.sys  Tue Apr 08 21:13:26 2014 (5344191E)
fffff801`899da000 fffff801`899fc000   aswMonFlt aswMonFlt.sys Thu Apr 17 16:34:01 2014 (534FB521)
fffff801`8ad34000 fffff801`8ad4e000   aswRdr2  aswRdr2.sys  Thu Apr 17 16:32:56 2014 (534FB4E0)
fffff801`8a5a6000 fffff801`8a5b9000   aswRvrt  aswRvrt.sys  Thu Apr 17 16:34:41 2014 (534FB549)
fffff801`8a848000 fffff801`8a949000   aswSnx   aswSnx.sys   Mon May 05 13:34:42 2014 (5367461A)
fffff801`8a949000 fffff801`8a9b6000   aswSP    aswSP.sys    Mon May 05 13:41:11 2014 (5367479F)
fffff801`8a0c3000 fffff801`8a0db000   aswStm   aswStm.sys   Mon May 05 13:41:48 2014 (536747C4)
fffff801`8a571000 fffff801`8a5a6000   aswVmm   aswVmm.sys   Thu Apr 17 16:34:55 2014 (534FB557)
fffff960`00afa000 fffff960`00b59000   ATMFD    ATMFD.DLL    unavailable (00000000)
fffff801`8ac88000 fffff801`8ac9a000   BasicDisplay BasicDisplay.sys Thu Aug 22 17:09:31 2013 (5215F873)
fffff801`8a9c7000 fffff801`8a9d5000   BasicRender BasicRender.sys Sat Feb 22 17:44:02 2014 (5308948A)
fffff801`8a9bf000 fffff801`8a9c7000   Beep     Beep.SYS     Thu Aug 22 17:10:24 2013 (5215F8A8)
fffff801`895b2000 fffff801`895bc000   BOOTVID  BOOTVID.dll  Thu Aug 22 17:10:26 2013 (5215F8AA)
fffff801`8b92b000 fffff801`8b94b000   bowser   bowser.sys   Thu Aug 22 17:08:38 2013 (5215F83E)
fffff960`008fd000 fffff960`00938000   cdd      cdd.dll      unavailable (00000000)
fffff801`8a095000 fffff801`8a0c3000   cdrom    cdrom.sys    Thu Aug 22 14:16:35 2013 (5215CFEB)
fffff801`89400000 fffff801`89488000   CI       CI.dll       Sat Feb 22 17:42:12 2014 (5308941C)
fffff801`8a51b000 fffff801`8a571000   CLASSPNP CLASSPNP.SYS Sat Mar 08 14:57:06 2014 (531AE26A)
fffff801`8951a000 fffff801`8957b000   CLFS     CLFS.SYS     Wed Mar 19 13:42:20 2014 (53295164)
fffff801`89945000 fffff801`899d0000   cng      cng.sys      Sat Mar 08 14:55:08 2014 (531AE1F4)
fffff801`8afd4000 fffff801`8afe3000   CompositeBus CompositeBus.sys Thu Aug 22 17:08:48 2013 (5215F848)
fffff801`8a3e9000 fffff801`8a3f9000   condrv   condrv.sys   Thu Aug 22 17:10:17 2013 (5215F8A1)
fffff801`8a5b9000 fffff801`8a5ce000   crashdmp crashdmp.sys Thu Aug 22 17:10:03 2013 (5215F893)
fffff801`8aed3000 fffff801`8af61000   csc      csc.sys      Thu Aug 22 17:08:00 2013 (5215F818)
fffff801`8af87000 fffff801`8afad000   dfsc     dfsc.sys     Thu Mar 06 14:52:50 2014 (53183E6A)
fffff801`8a4ff000 fffff801`8a51b000   disk     disk.sys     Thu Aug 22 17:09:47 2013 (5215F883)
fffff801`8b666000 fffff801`8b682000   drmk     drmk.sys     Thu Aug 22 17:09:24 2013 (5215F86C)
fffff801`8a9d5000 fffff801`8a9e1000   dump_diskdump dump_diskdump.sys Thu Aug 22 17:10:18 2013 (5215F8A2)
fffff801`8a416000 fffff801`8a42c000   dump_dumpfve dump_dumpfve.sys Sat Feb 22 17:44:48 2014 (530894B8)
fffff801`8a9e1000 fffff801`8a9fe000   dump_storahci dump_storahci.sys Thu Aug 22 17:10:39 2013 (5215F8B7)
fffff801`8aa94000 fffff801`8ac15000   dxgkrnl  dxgkrnl.sys  Thu Mar 06 14:52:58 2014 (53183E72)
fffff801`8ac27000 fffff801`8ac88000   dxgmms1  dxgmms1.sys  Thu Mar 06 14:52:14 2014 (53183E46)
fffff801`8b4f5000 fffff801`8b569000   e1i63x64 e1i63x64.sys Wed Mar 20 13:07:29 2013 (51496739)
fffff801`89a2b000 fffff801`89a64000   fastfat  fastfat.SYS  Thu Aug 22 17:10:18 2013 (5215F8A2)
fffff801`89bd6000 fffff801`89bec000   fileinfo fileinfo.sys Sat Feb 22 17:43:10 2014 (53089456)
fffff801`89b7a000 fffff801`89bd6000   fltmgr   fltmgr.sys   Sat Feb 22 17:45:40 2014 (530894EC)
fffff801`89ed6000 fffff801`89ee1000   Fs_Rec   Fs_Rec.sys   Thu Aug 22 14:16:33 2013 (5215CFE9)
fffff801`8a000000 fffff801`8a095000   fvevol   fvevol.sys   Sat Feb 22 17:41:54 2014 (5308940A)
fffff801`8a358000 fffff801`8a3c4000   fwpkclnt fwpkclnt.sys Tue Mar 04 14:58:07 2014 (53159CA7)
fffff801`8b5f0000 fffff801`8b5f6c00   GEARAspiWDM GEARAspiWDM.sys Fri May 04 01:26:17 2012 (4FA2E2E1)
fffff801`bed9f000 fffff801`bee0f000   hal      hal.dll      Sat Feb 22 17:45:53 2014 (530894F9)
fffff801`8b42c000 fffff801`8b445000   HDAudBus HDAudBus.sys Thu Aug 22 17:08:37 2013 (5215F83D)
fffff801`8b600000 fffff801`8b666000   HdAudio  HdAudio.sys  Thu Aug 22 17:08:19 2013 (5215F82B)
fffff801`8bddd000 fffff801`8bde9000   hiber_diskdump hiber_diskdump.sys Thu Aug 22 17:10:18 2013 (5215F8A2)
fffff801`8bde9000 fffff801`8bdff000   hiber_dumpfve hiber_dumpfve.sys Sat Feb 22 17:44:48 2014 (530894B8)
fffff801`8bc00000 fffff801`8bc1d000   hiber_storahci hiber_storahci.sys Thu Aug 22 17:10:39 2013 (5215F8B7)
fffff801`8ae3f000 fffff801`8ae5e000   HIDCLASS HIDCLASS.SYS Thu Mar 06 14:54:40 2014 (53183ED8)
fffff801`8b7f0000 fffff801`8b7f7f00   HIDPARSE HIDPARSE.SYS Thu Aug 22 17:10:26 2013 (5215F8AA)
fffff801`8b688000 fffff801`8b696000   hidusb   hidusb.sys   Thu Mar 06 14:54:14 2014 (53183EBE)
fffff801`8b831000 fffff801`8b92b000   HTTP     HTTP.sys     Tue Jan 28 01:18:02 2014 (52E6B7F2)
fffff801`8b008000 fffff801`8b42c000   igdkmd64 igdkmd64.sys Thu Jan 23 04:12:16 2014 (52E04948)
fffff801`8a4e4000 fffff801`8a4f3000   intelpep intelpep.sys Sat Nov 09 14:15:55 2013 (527DF643)
fffff801`8ae00000 fffff801`8ae1e000   intelppm intelppm.sys Thu Aug 22 14:16:35 2013 (5215CFEB)
fffff801`8b6ea000 fffff801`8b6f6000   iwdbus   iwdbus.sys   Wed Dec 18 04:17:38 2013 (52B0D48A)
fffff801`8aa7f000 fffff801`8aa8f000   kbdclass kbdclass.sys Thu Aug 22 17:09:23 2013 (5215F86B)
fffff801`8afad000 fffff801`8afbb000   kbdhid   kbdhid.sys   Thu Aug 22 17:09:13 2013 (5215F861)
fffff801`bd963000 fffff801`bd96c000   kd       kd.dll       Thu Aug 22 17:10:43 2013 (5215F8BB)
fffff801`8afe3000 fffff801`8afee000   kdnic    kdnic.sys    Thu Aug 22 17:08:26 2013 (5215F832)
fffff801`8b69b000 fffff801`8b6ea000   ks       ks.sys       Sat Feb 22 17:44:40 2014 (530894B0)
fffff801`89eaa000 fffff801`89ec6000   ksecdd   ksecdd.sys   Sat Sep 21 13:29:44 2013 (523D51F0)
fffff801`89c79000 fffff801`89caa000   ksecpkg  ksecpkg.sys  Sat Mar 08 14:54:07 2014 (531AE1B7)
fffff801`8b682000 fffff801`8b687300   ksthunk  ksthunk.sys  Thu Aug 22 17:09:31 2013 (5215F873)
fffff801`8a400000 fffff801`8a414000   lltdio   lltdio.sys   Thu Aug 22 17:06:18 2013 (5215F7B2)
fffff801`8a5dc000 fffff801`8a600000   luafv    luafv.sys    Sat Feb 22 17:44:25 2014 (530894A1)
fffff801`894a6000 fffff801`8950c000   mcupdate_GenuineIntel mcupdate_GenuineIntel.dll Thu Aug 22 17:10:16 2013 (5215F8A0)
fffff801`8a5ce000 fffff801`8a5dc000   monitor  monitor.sys  Thu Aug 22 17:06:37 2013 (5215F7C5)
fffff801`8adee000 fffff801`8adfe000   mouclass mouclass.sys Thu Aug 22 17:09:13 2013 (5215F861)
fffff801`8ade1000 fffff801`8adee000   mouhid   mouhid.sys   Thu Aug 22 17:09:13 2013 (5215F861)
fffff801`89ac9000 fffff801`89ae4000   mountmgr mountmgr.sys Thu Aug 22 17:10:04 2013 (5215F894)
fffff801`8b94b000 fffff801`8b962000   mpsdrv   mpsdrv.sys   Thu Aug 22 17:06:06 2013 (5215F7A6)
fffff801`8b962000 fffff801`8b9cf000   mrxsmb   mrxsmb.sys   Thu Mar 06 14:50:21 2014 (53183DD5)
fffff801`8ba71000 fffff801`8babc000   mrxsmb10 mrxsmb10.sys Thu Mar 06 14:49:36 2014 (53183DA8)
fffff801`895bc000 fffff801`895f5000   mrxsmb20 mrxsmb20.sys Sat Sep 21 13:27:59 2013 (523D5187)
fffff801`8acae000 fffff801`8acba000   Msfs     Msfs.SYS     Thu Aug 22 17:10:24 2013 (5215F8A8)
fffff801`899d0000 fffff801`899da000   msisadrv msisadrv.sys Thu Aug 22 17:09:03 2013 (5215F857)
fffff801`8bd91000 fffff801`8bda7000   mslldp   mslldp.sys   Thu Aug 22 17:06:07 2013 (5215F7A7)
fffff801`896f7000 fffff801`89754000   msrpc    msrpc.sys    Thu Aug 22 17:09:22 2013 (5215F86A)
fffff801`8af7b000 fffff801`8af87000   mssmbios mssmbios.sys Thu Aug 22 17:09:41 2013 (5215F87D)
fffff801`8a4cd000 fffff801`8a4e4000   mup      mup.sys      Thu Aug 22 17:10:28 2013 (5215F8AC)
fffff801`89ee1000 fffff801`89ff9000   ndis     ndis.sys     Sat Feb 22 17:42:58 2014 (5308944A)
fffff801`8ae1e000 fffff801`8ae29000   NdisVirtualBus NdisVirtualBus.sys Thu Aug 22 17:06:25 2013 (5215F7B9)
fffff801`8babc000 fffff801`8bad9000   Ndu      Ndu.sys      Thu Aug 22 17:05:42 2013 (5215F78E)
fffff801`8aa2a000 fffff801`8aa3b000   netbios  netbios.sys  Thu Aug 22 17:08:58 2013 (5215F852)
fffff801`8ace8000 fffff801`8ad34000   netbt    netbt.sys    Thu Aug 22 17:07:01 2013 (5215F7DD)
fffff801`89c00000 fffff801`89c79000   NETIO    NETIO.SYS    Thu Aug 22 17:07:08 2013 (5215F7E4)
fffff801`8ac9a000 fffff801`8acae000   Npfs     Npfs.SYS     Thu Aug 22 17:10:25 2013 (5215F8A9)
fffff801`8af6f000 fffff801`8af7b000   npsvctrig npsvctrig.sys Thu Aug 22 17:08:22 2013 (5215F82E)
fffff801`8af61000 fffff801`8af6f000   nsiproxy nsiproxy.sys Thu Aug 22 17:06:34 2013 (5215F7C2)
fffff801`be616000 fffff801`bed9f000   nt       ntkrnlmp.exe Thu Mar 06 10:48:55 2014 (5318053F)
fffff801`89cb4000 fffff801`89eaa000   Ntfs     Ntfs.sys     Wed Mar 19 09:28:52 2014 (532915FC)
fffff801`8a9b6000 fffff801`8a9bf000   Null     Null.SYS     Thu Aug 22 17:10:24 2013 (5215F8A8)
fffff801`8aa00000 fffff801`8aa2a000   pacer    pacer.sys    Thu Aug 22 17:06:06 2013 (5215F7A6)
fffff801`89871000 fffff801`89889000   partmgr  partmgr.sys  Thu Aug 22 17:10:20 2013 (5215F8A4)
fffff801`89800000 fffff801`89848000   pci      pci.sys      Sat Feb 22 17:42:41 2014 (53089439)
fffff801`89ec6000 fffff801`89ed6000   pcw      pcw.sys      Thu Aug 22 14:16:34 2013 (5215CFEA)
fffff801`89855000 fffff801`89871000   pdc      pdc.sys      Fri Nov 01 10:28:42 2013 (52733502)
fffff801`8bad9000 fffff801`8bb82000   peauth   peauth.sys   Sat Feb 22 17:39:37 2014 (53089381)
fffff801`8a800000 fffff801`8a847000   portcls  portcls.sys  Sat Feb 22 17:41:25 2014 (530893ED)
fffff801`8959d000 fffff801`895b2000   PSHED    PSHED.dll    Sat Sep 14 19:27:19 2013 (52346B3F)
fffff801`8ae63000 fffff801`8aed3000   rdbss    rdbss.sys    Tue Dec 17 12:51:22 2013 (52AFFB72)
fffff801`8b6f6000 fffff801`8b701000   rdpbus   rdpbus.sys   Thu Aug 22 17:08:52 2013 (5215F84C)
fffff801`8a487000 fffff801`8a4cd000   rdyboost rdyboost.sys Sat Feb 22 17:43:40 2014 (53089474)
fffff801`89b60000 fffff801`89b78000   rspndr   rspndr.sys   Thu Aug 22 17:06:34 2013 (5215F7C2)
fffff801`8bb82000 fffff801`8bb8d000   secdrv   secdrv.SYS   Wed Sep 13 18:48:38 2006 (4508052E)
fffff801`8b4e8000 fffff801`8b4f5000   serenum  serenum.sys  Thu Aug 22 17:10:17 2013 (5215F8A1)
fffff801`8aa3b000 fffff801`8aa55000   serial   serial.sys   Thu Aug 22 17:10:08 2013 (5215F898)
fffff801`89777000 fffff801`897d8000   spaceport spaceport.sys Sat Feb 22 17:42:32 2014 (53089430)
fffff801`8bccc000 fffff801`8bd64000   srv      srv.sys      Sat Oct 05 16:31:15 2013 (524FF17B)
fffff801`8bc1e000 fffff801`8bccc000   srv2     srv2.sys     Thu Mar 06 14:52:30 2014 (53183E56)
fffff801`8bb8d000 fffff801`8bbd0000   srvnet   srvnet.sys   Thu Mar 06 14:50:29 2014 (53183DDD)
fffff801`89ae4000 fffff801`89b01000   storahci storahci.sys Thu Aug 22 17:10:39 2013 (5215F8B7)
fffff801`89b01000 fffff801`89b60000   storport storport.sys Sat Feb 22 17:43:42 2014 (53089476)
fffff801`8b5f7000 fffff801`8b5f8600   swenum   swenum.sys   Thu Aug 22 17:09:29 2013 (5215F871)
fffff801`8a0e3000 fffff801`8a358000   tcpip    tcpip.sys    Tue Mar 04 15:01:29 2014 (53159D71)
fffff801`8bbd0000 fffff801`8bbe2000   tcpipreg tcpipreg.sys Thu Mar 06 14:49:59 2014 (53183DBF)
fffff801`8acda000 fffff801`8ace8000   TDI      TDI.SYS      Thu Aug 22 17:09:01 2013 (5215F855)
fffff801`8acba000 fffff801`8acda000   tdx      tdx.sys      Thu Aug 22 17:06:34 2013 (5215F7C2)
fffff801`8b4cc000 fffff801`8b4e8000   TeeDriverx64 TeeDriverx64.sys Thu Sep 05 23:32:18 2013 (5228C72A)
fffff801`8957b000 fffff801`8959d000   tm       tm.sys       Thu Aug 22 17:09:33 2013 (5215F875)
fffff960`006a3000 fffff960`006ac000   TSDDD    TSDDD.dll    unavailable (00000000)
fffff801`8bd64000 fffff801`8bd91000   tunnel   tunnel.sys   Thu Aug 22 17:05:45 2013 (5215F791)
fffff801`8ae29000 fffff801`8ae3f000   uaspstor uaspstor.sys Thu Aug 22 17:07:58 2013 (5215F816)
fffff801`8b49a000 fffff801`8b4cc000   ucx01000 ucx01000.sys Sat Feb 22 17:41:33 2014 (530893F5)
fffff801`8afee000 fffff801`8afff000   umbus    umbus.sys    Thu Aug 22 17:08:59 2013 (5215F853)
fffff801`8bdd3000 fffff801`8bddd000   umpass   umpass.sys   Thu Aug 22 17:08:58 2013 (5215F852)
fffff801`8aa55000 fffff801`8aa7f000   usbccgp  usbccgp.sys  Wed Oct 23 13:47:41 2013 (52678625)
fffff801`8b76c000 fffff801`8b778000   USBD     USBD.SYS     Thu Aug 22 17:10:22 2013 (5215F8A6)
fffff801`8b569000 fffff801`8b581000   usbehci  usbehci.sys  Thu Aug 22 17:09:15 2013 (5215F863)
fffff801`8b701000 fffff801`8b76c000   usbhub   usbhub.sys   Thu Aug 22 17:08:33 2013 (5215F839)
fffff801`8b778000 fffff801`8b7f0000   UsbHub3  UsbHub3.sys  Sat Mar 08 14:53:48 2014 (531AE1A4)
fffff801`8b581000 fffff801`8b5f0000   USBPORT  USBPORT.SYS  Thu Aug 22 17:09:40 2013 (5215F87C)
fffff801`8b445000 fffff801`8b49a000   USBXHCI  USBXHCI.SYS  Sat Feb 22 17:41:27 2014 (530893EF)
fffff801`89848000 fffff801`89855000   vdrvroot vdrvroot.sys Thu Aug 22 17:08:49 2013 (5215F849)
fffff801`89889000 fffff801`8989e000   volmgr   volmgr.sys   Thu Aug 22 17:09:53 2013 (5215F889)
fffff801`89a6a000 fffff801`89ac9000   volmgrx  volmgrx.sys  Thu Aug 22 17:10:23 2013 (5215F8A7)
fffff801`8a437000 fffff801`8a487000   volsnap  volsnap.sys  Sat Feb 22 17:45:51 2014 (530894F7)
fffff801`8ac15000 fffff801`8ac27000   watchdog watchdog.sys Sat Feb 22 17:44:39 2014 (530894AF)
fffff801`89600000 fffff801`896cf000   Wdf01000 Wdf01000.sys Thu Aug 22 17:08:56 2013 (5215F850)
fffff801`896cf000 fffff801`896e0000   WDFLDR   WDFLDR.SYS   Thu Aug 22 17:09:03 2013 (5215F857)
fffff801`8950c000 fffff801`8951a000   werkernel werkernel.sys Thu Aug 22 17:10:24 2013 (5215F8A8)
fffff801`8a3c4000 fffff801`8a3e9000   wfplwfs  wfplwfs.sys  Sat Mar 08 14:52:45 2014 (531AE165)
fffff960`0008b000 fffff960`004a5000   win32k   win32k.sys   unavailable (00000000)
fffff801`8993b000 fffff801`89945000   WMILIB   WMILIB.SYS   Thu Aug 22 17:10:23 2013 (5215F8A7)
fffff801`89a00000 fffff801`89a2b000   Wof      Wof.sys      Thu Mar 13 13:57:29 2014 (53216BF1)
fffff801`8bdc8000 fffff801`8bdd3000   WpdUpFltr WpdUpFltr.sys Thu Aug 22 17:08:45 2013 (5215F845)
fffff801`8976c000 fffff801`89777000   WppRecorder WppRecorder.sys Thu Aug 22 17:09:40 2013 (5215F87C)
fffff801`8bda7000 fffff801`8bdc8000   WudfPf   WudfPf.sys   Thu Aug 22 17:07:21 2013 (5215F7F1)
fffff801`8ba00000 fffff801`8ba3e000   WUDFRd   WUDFRd.sys   Thu Aug 22 17:06:50 2013 (5215F7D2)


Unloaded modules:
fffff801`8bda7000 fffff801`8bde5000   WUDFRd.sys
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0003E000
fffff801`8a5ce000 fffff801`8a5da000   dump_storpor
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0000C000
fffff801`8a5da000 fffff801`8a5f7000   dump_storahc
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0001D000
fffff801`8a400000 fffff801`8a416000   dump_dumpfve
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  00016000
fffff801`89b60000 fffff801`89b7a000   EhStorClass.
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0001A000
fffff801`8afad000 fffff801`8afbd000   dam.sys 
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  00010000
fffff801`8a4f3000 fffff801`8a4ff000   hwpolicy.sys
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0000C000
quit:
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
**************************Fri Jun  6 23:50:47.030 2014 (UTC + 5:30)**************************


Opened log file 'C:\Users\BLUEEL~1\AppData\Local\Temp\SysnativeBSODApps\20164\dmps\outkdOutput7.txt'


Microsoft (R) Windows Debugger Version 6.3.9600.16384 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.




Loading Dump File [C:\SysnativeBSODApps\060614-7984-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available




************* Symbol Path validation summary **************
Response                         Time (ms)     Location
Deferred                                       srv*c:\symbols*http://msdl.microsoft.com/download/symbols
Symbol search path is: srv*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is: 
*** ERROR: Symbol file could not be found.  Defaulted to export symbols for ntkrnlmp.exe - 
Windows 8 Kernel Version 9600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 9600.17041.amd64fre.winblue_gdr.140305-1710
Machine Name:
Kernel base = 0xfffff800`91004000 PsLoadedModuleList = 0xfffff800`912ce2d0
Debug session time: Fri Jun  6 23:50:47.030 2014 (UTC + 5:30)
System Uptime: 2 days 19:39:33.722
*** ERROR: Symbol file could not be found.  Defaulted to export symbols for ntkrnlmp.exe - 
Loading Kernel Symbols
.


Press ctrl-c (cdb, kd, ntsd) or ctrl-break (windbg) to abort symbol loads that take too long.
Run !sym noisy before .reload to track down problems loading symbols.


..............................................................
................................................................
......................
Loading User Symbols
Loading unloaded module list
..................................................


************* Symbol Loading Error Summary **************
Module name            Error
ntkrnlmp               The system cannot find the file specified


You can troubleshoot most symbol related issues by turning on symbol loading diagnostics (!sym noisy) and repeating the command that caused symbols to be loaded.
You should also verify that your symbol search path (.sympath) is correct.
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************


Use !analyze -v to get detailed debugging information.


BugCheck 139, {3, ffffd0002044cee0, ffffd0002044ce38, 0}


*** ERROR: Module load completed but symbols could not be loaded for Ntfs.sys
***** Kernel symbols are WRONG. Please fix symbols to do analysis.


*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!KPRCB                                      ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!KPRCB                                      ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_MMPTE                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_MMPTE                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
Probably caused by : ntkrnlmp.exe ( nt!setjmpex+37e9 )


Followup: MachineOwner
---------


0: kd> !analyze -v; !sysinfo cpuspeed; !sysinfo SMBIOS; lmtsmn; q
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************


KERNEL_SECURITY_CHECK_FAILURE (139)
A kernel component has corrupted a critical data structure.  The corruption
could potentially allow a malicious user to gain control of this machine.
Arguments:
Arg1: 0000000000000003, A LIST_ENTRY has been corrupted (i.e. double remove).
Arg2: ffffd0002044cee0, Address of the trap frame for the exception that caused the bugcheck
Arg3: ffffd0002044ce38, Address of the exception record for the exception that caused the bugcheck
Arg4: 0000000000000000, Reserved


Debugging Details:
------------------


***** Kernel symbols are WRONG. Please fix symbols to do analysis.


*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!KPRCB                                      ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!KPRCB                                      ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_MMPTE                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_MMPTE                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************


ADDITIONAL_DEBUG_TEXT:  


You can run '.symfix; .reload' to try to fix the symbol path and load symbols.


MODULE_NAME: nt


FAULTING_MODULE: fffff80091004000 nt


DEBUG_FLR_IMAGE_TIMESTAMP:  5318053f


TRAP_FRAME:  ffffd0002044cee0 -- (.trap 0xffffd0002044cee0)
.trap 0xffffd0002044cee0
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=ffffe0013f507de8 rbx=0000000000000000 rcx=0000000000000003
rdx=ffffe001388c3b88 rsi=0000000000000000 rdi=0000000000000000
rip=fffff80091054050 rsp=ffffd0002044d070 rbp=ffffc00081767000
 r8=00000000000004c0  r9=0000000000000000 r10=ffffe0013f507e30
r11=ffffd0002044d300 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei pl nz na pe nc
nt!KeInitializeDpc+0xb9c:
fffff800`91054050 cd29            int     29h
.trap
Resetting default scope


EXCEPTION_RECORD:  ffffd0002044ce38 -- (.exr 0xffffd0002044ce38)
.exr 0xffffd0002044ce38
ExceptionAddress: fffff80091054050 (nt!KeInitializeDpc+0x0000000000000b9c)
   ExceptionCode: c0000409 (Security check failure or stack buffer overrun)
  ExceptionFlags: 00000001
NumberParameters: 1
   Parameter[0]: 0000000000000003


CUSTOMER_CRASH_COUNT:  1


DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT


BUGCHECK_STR:  0x139


CURRENT_IRQL:  0


ANALYSIS_VERSION: 6.3.9600.16384 (debuggers(dbg).130821-1623) amd64fre


LAST_CONTROL_TRANSFER:  from fffff80091163ae9 to fffff80091157fa0


STACK_TEXT:  
ffffd000`2044cbb8 fffff800`91163ae9 : 00000000`00000139 00000000`00000003 ffffd000`2044cee0 ffffd000`2044ce38 : nt!KeBugCheckEx
ffffd000`2044cbc0 fffff800`91163e10 : ffffe001`391e3100 ffffe001`3f81ef20 ffffe001`391e3030 00000000`00000000 : nt!setjmpex+0x37e9
ffffd000`2044cd00 fffff800`91163034 : ffffc000`8caca018 ffffd000`2044d020 ffffd000`2044d208 00000000`00000000 : nt!setjmpex+0x3b10
ffffd000`2044cee0 fffff800`91054050 : ffffe001`3f507e58 ffff5c37`da842033 00000000`00000000 ffffd000`2044d210 : nt!setjmpex+0x2d34
ffffd000`2044d070 fffff800`91052bd9 : ffffe001`3f507e58 ffffe001`3f507de0 ffffe001`416f5018 fffff800`06b187e6 : nt!KeInitializeDpc+0xb9c
ffffd000`2044d0a0 fffff800`910529fc : ffffd000`2044d190 ffffd000`2044d1c0 00000000`00000000 fffff800`00000000 : nt!RtlFindClearBitsAndSet+0xc21
ffffd000`2044d0f0 fffff800`9105252c : 00000000`00000000 00000000`00000001 ffffe001`396ce660 ffff5c37`da843f43 : nt!RtlFindClearBitsAndSet+0xa44
ffffd000`2044d140 fffff800`910952ff : ffffe001`416f5018 00000000`00000001 00000000`00000000 00000000`00000000 : nt!RtlFindClearBitsAndSet+0x574
ffffd000`2044d200 fffff800`9110c359 : ffffe001`3f542ae8 00000000`00000000 ffffe001`00000000 00000000`00000000 : nt!CcInitializeCacheMap+0xeeb
ffffd000`2044d310 fffff800`06ae6d04 : ffffe001`416f5018 ffffd000`2044d790 00000000`00000001 ffffc000`82d1ec30 : nt!CcFlushCache+0x11
ffffd000`2044d350 fffff800`06b6bf42 : ffffe001`416f5018 ffffc000`82d1ec30 ffffe001`416f5018 00000000`00000000 : Ntfs+0xa6d04
ffffd000`2044d3d0 fffff800`06a68750 : ffffe001`416f5018 ffffe001`391e3180 00000000`00000000 fffff800`069d9061 : Ntfs+0x12bf42
ffffd000`2044d520 fffff800`06a5d3fd : ffffe001`416f5018 ffffe001`3b8d7190 ffffe001`3bb63de0 ffffc000`75861301 : Ntfs+0x28750
ffffd000`2044d5c0 fffff800`06a5d76c : ffffe001`416f5018 ffffe001`3b8d7190 ffffd000`2044d701 00000000`00000201 : Ntfs+0x1d3fd
ffffd000`2044d760 fffff800`06977cf8 : ffffe001`3d3e1010 ffffe001`3b8d7190 ffffe001`3b8d7190 ffffe001`3b8d7530 : Ntfs+0x1d76c
ffffd000`2044d810 fffff800`069760b6 : ffffe001`3ac94820 00000000`00000000 ffffe001`3b8d7190 ffffe001`00000001 : fltmgr!FltpLegacyProcessingAfterPreCallbacksCompleted+0x258
ffffd000`2044d8b0 fffff800`913fbd1a : ffffe001`3b8d7530 ffffd000`2044db80 00000000`00000000 00000000`0000000b : fltmgr!FltpDispatch+0xb6
ffffd000`2044d910 fffff800`911637b3 : ffffe001`3af6e568 00000000`00000000 00000000`00000000 fffff6fb`7da01b58 : nt!NtReadFile+0x7ca
ffffd000`2044da90 00007fff`04e1abea : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!setjmpex+0x34b3
000000d9`8ed2c3a8 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x00007fff`04e1abea




STACK_COMMAND:  kb


FOLLOWUP_IP: 
nt!setjmpex+37e9
fffff800`91163ae9 90              nop


SYMBOL_STACK_INDEX:  1


SYMBOL_NAME:  nt!setjmpex+37e9


FOLLOWUP_NAME:  MachineOwner


IMAGE_NAME:  ntkrnlmp.exe


IMAGE_VERSION:  6.3.9600.17041


BUCKET_ID:  WRONG_SYMBOLS


FAILURE_BUCKET_ID:  WRONG_SYMBOLS


ANALYSIS_SOURCE:  KM


FAILURE_ID_HASH_STRING:  km:wrong_symbols


FAILURE_ID_HASH:  {70b057e8-2462-896f-28e7-ac72d4d365f8}


Followup: MachineOwner
---------


CPUID:        "Intel(R) Core(TM) i5-4670 CPU @ 3.40GHz"
MaxSpeed:     3400
CurrentSpeed: 3392
[SMBIOS Data Tables v2.7]
[DMI Version - 39]
[2.0 Calling Convention - No]
[Table Size - 3045 bytes]


[BIOS Information (Type 0) - Length 24 - Handle 0000h]
  Vendor                        American Megatrends Inc.
  BIOS Version                  F6
  BIOS Starting Address Segment f000
  BIOS Release Date             01/17/2014
  BIOS ROM Size                 800000
  BIOS Characteristics
       07: - PCI Supported
       11: - Upgradeable FLASH BIOS
       12: - BIOS Shadowing Supported
       15: - CD-Boot Supported
       16: - Selectable Boot Supported
       17: - BIOS ROM Socketed
       19: - EDD Supported
       23: - 1.2MB Floppy Supported
       24: - 720KB Floppy Supported
       25: - 2.88MB Floppy Supported
       26: - Print Screen Device Supported
       27: - Keyboard Services Supported
       28: - Serial Services Supported
       29: - Printer Services Supported
       32: - BIOS Vendor Reserved
  BIOS Characteristic Extensions
       00: - ACPI Supported
       01: - USB Legacy Supported
       08: - BIOS Boot Specification Supported
       10: - Specification Reserved
       11: - Specification Reserved
  BIOS Major Revision           4
  BIOS Minor Revision           6
  EC Firmware Major Revision    255
  EC Firmware Minor Revision    255
[System Information (Type 1) - Length 27 - Handle 0001h]
  Manufacturer                  Gigabyte Technology Co., Ltd.
  Product Name                  H87-D3H
  Version                       To be filled by O.E.M.
  Serial Number                                       
  UUID                          00000000-0000-0000-0000-000000000000
  Wakeup Type                   Power Switch
  SKUNumber                     To be filled by O.E.M.
  Family                        To be filled by O.E.M.
[BaseBoard Information (Type 2) - Length 15 - Handle 0002h]
  Manufacturer                  Gigabyte Technology Co., Ltd.
  Product                       H87-D3H-CF
  Version                       x.x
  Serial Number                                       
  Asset Tag                                           
  Feature Flags                 09h
       -831232224: - (null)
       -831232176: - (null)
  Location                      To be filled by O.E.M.
  Chassis Handle                0003h
  Board Type                    0ah - Processor/Memory Module
  Number of Child Handles       0
[System Enclosure (Type 3) - Length 22 - Handle 0003h]
  Manufacturer                  Gigabyte Technology Co., Ltd.
  Chassis Type                  Desktop
  Version                       To Be Filled By O.E.M.
  Serial Number                                       
  Asset Tag Number                                    
  Bootup State                  Safe
  Power Supply State            Safe
  Thermal State                 Safe
  Security Status               None
  OEM Defined                   0
  Height                        0U
  Number of Power Cords         1
  Number of Contained Elements  0
  Contained Element Size        0
[Cache Information (Type 7) - Length 19 - Handle 0004h]
  Socket Designation            CPU Internal L1
  Cache Configuration           0180h - WB Enabled Int NonSocketed L1
  Maximum Cache Size            0100h - 256K
  Installed Size                0100h - 256K
  Supported SRAM Type           0002h - Unknown 
  Current SRAM Type             0002h - Unknown 
  Cache Speed                   0ns
  Error Correction Type         Multi-Bit ECC
  System Cache Type             Other
  Associativity                 8-way Set-Associative
[Cache Information (Type 7) - Length 19 - Handle 0005h]
  Socket Designation            CPU Internal L2
  Cache Configuration           0181h - WB Enabled Int NonSocketed L2
  Maximum Cache Size            0400h - 1024K
  Installed Size                0400h - 1024K
  Supported SRAM Type           0002h - Unknown 
  Current SRAM Type             0002h - Unknown 
  Cache Speed                   0ns
  Error Correction Type         Multi-Bit ECC
  System Cache Type             Unified
  Associativity                 8-way Set-Associative
[Cache Information (Type 7) - Length 19 - Handle 0006h]
  Socket Designation            CPU Internal L3
  Cache Configuration           0182h - WB Enabled Int NonSocketed L3
  Maximum Cache Size            1800h - 6144K
  Installed Size                1800h - 6144K
  Supported SRAM Type           0002h - Unknown 
  Current SRAM Type             0002h - Unknown 
  Cache Speed                   0ns
  Error Correction Type         Multi-Bit ECC
  System Cache Type             Unified
  Associativity                 Specification Reserved
[Physical Memory Array (Type 16) - Length 23 - Handle 0007h]
  Location                      03h - SystemBoard/Motherboard
  Use                           03h - System Memory
  Memory Error Correction       03h - None
  Maximum Capacity              33554432KB
  Memory Error Inf Handle       [Not Provided]
  Number of Memory Devices      4
[Onboard Devices Information (Type 10) - Length 6 - Handle 0026h]
  Number of Devices             1
  01: Type                      Video [enabled]
  01: Description                  To Be Filled By O.E.M.
[OEM Strings (Type 11) - Length 5 - Handle 0027h]
  Number of Strings             1
   1                            To Be Filled By O.E.M.
[System Configuration Options (Type 12) - Length 5 - Handle 0028h]
[Processor Information (Type 4) - Length 42 - Handle 0041h]
  Socket Designation            SOCKET 0
  Processor Type                Central Processor
  Processor Family              c6h - Specification Reserved
  Processor Manufacturer        Intel
  Processor ID                  c3060300fffbebbf
  Processor Version             Intel(R) Core(TM) i5-4670 CPU @ 3.40GHz
  Processor Voltage             8bh - 1.1V
  External Clock                100MHz
  Max Speed                     7000MHz
  Current Speed                 3600MHz
  Status                        Enabled Populated
  Processor Upgrade             Other
  L1 Cache Handle               0004h
  L2 Cache Handle               0005h
  L3 Cache Handle               0006h
  Serial Number                 [String Not Specified]
  Asset Tag Number                         
  Part Number                   Fill By OEM
[Memory Device (Type 17) - Length 34 - Handle 0042h]
  Physical Memory Array Handle  0007h
  Memory Error Info Handle      [Not Provided]
  Total Width                   0 bits
  Data Width                    0 bits
  Size                          [Not Populated]
  Form Factor                   09h - DIMM
  Device Set                    [None]
  Device Locator                ChannelA-DIMM0
  Bank Locator                  BANK 0
  Memory Type                   02h - Unknown
  Type Detail                   0000h -
  Speed                         0MHz
  Manufacturer                  [Empty]
  Serial Number                        
  Asset Tag Number                        
  Part Number                   [Empty]
[Memory Device (Type 17) - Length 34 - Handle 0043h]
  Physical Memory Array Handle  0007h
  Memory Error Info Handle      [Not Provided]
  Total Width                   64 bits
  Data Width                    64 bits
  Size                          8192MB
  Form Factor                   09h - DIMM
  Device Set                    [None]
  Device Locator                ChannelA-DIMM1
  Bank Locator                  BANK 1
  Memory Type                   18h - Specification Reserved
  Type Detail                   0080h - Synchronous
  Speed                         1600MHz
  Manufacturer                  1315
  Serial Number                         
  Asset Tag Number                        
  Part Number                   BLS8G3D1609DS1S00.
[Memory Device Mapped Address (Type 20) - Length 35 - Handle 0044h]
  Starting Address              00000000h
  Ending Address                007fffffh
  Memory Device Handle          0043h
  Mem Array Mapped Adr Handle   0048h
  Partition Row Position        [Unknown]
  Interleave Position           [Unknown]
  Interleave Data Depth         [Unknown]
[Memory Device (Type 17) - Length 34 - Handle 0045h]
  Physical Memory Array Handle  0007h
  Memory Error Info Handle      [Not Provided]
  Total Width                   0 bits
  Data Width                    0 bits
  Size                          [Not Populated]
  Form Factor                   09h - DIMM
  Device Set                    [None]
  Device Locator                ChannelB-DIMM0
  Bank Locator                  BANK 2
  Memory Type                   02h - Unknown
  Type Detail                   0000h -
  Speed                         0MHz
  Manufacturer                  [Empty]
  Serial Number                        
  Asset Tag Number                        
  Part Number                   [Empty]
[Memory Device (Type 17) - Length 34 - Handle 0046h]
  Physical Memory Array Handle  0007h
  Memory Error Info Handle      [Not Provided]
  Total Width                   64 bits
  Data Width                    64 bits
  Size                          8192MB
  Form Factor                   09h - DIMM
  Device Set                    [None]
  Device Locator                ChannelB-DIMM1
  Bank Locator                  BANK 3
  Memory Type                   18h - Specification Reserved
  Type Detail                   0080h - Synchronous
  Speed                         1600MHz
  Manufacturer                  1315
  Serial Number                         
  Asset Tag Number                        
  Part Number                   BLS8G3D1609DS1S00.
[Memory Device Mapped Address (Type 20) - Length 35 - Handle 0047h]
  Starting Address              00800000h
  Ending Address                00ffffffh
  Memory Device Handle          0046h
  Mem Array Mapped Adr Handle   0048h
  Partition Row Position        [Unknown]
  Interleave Position           [Unknown]
  Interleave Data Depth         [Unknown]
[Memory Array Mapped Address (Type 19) - Length 31 - Handle 0048h]
  Starting Address              00000000h
  Ending Address                00ffffffh
  Memory Array Handle           0007h
  Partition Width               04
start             end                 module name
fffff800`06600000 fffff800`0668a000   ACPI     ACPI.sys     Sat Feb 22 17:43:57 2014 (53089485)
fffff800`0677d000 fffff800`06795000   acpiex   acpiex.sys   Thu Aug 22 17:07:47 2013 (5215F80B)
fffff800`07a18000 fffff800`07aab000   afd      afd.sys      Thu Aug 22 17:06:50 2013 (5215F7D2)
fffff800`073d9000 fffff800`073f0000   ahcache  ahcache.sys  Thu Aug 22 17:09:54 2013 (5215F88A)
fffff800`087dd000 fffff800`087e7000   aswHwid  aswHwid.sys  Tue Apr 08 21:13:26 2014 (5344191E)
fffff800`083c3000 fffff800`083e5000   aswMonFlt aswMonFlt.sys Thu Apr 17 16:34:01 2014 (534FB521)
fffff800`0727a000 fffff800`07294000   aswRdr2  aswRdr2.sys  Thu Apr 17 16:32:56 2014 (534FB4E0)
fffff800`07372000 fffff800`07385000   aswRvrt  aswRvrt.sys  Thu Apr 17 16:34:41 2014 (534FB549)
fffff800`07618000 fffff800`07719000   aswSnx   aswSnx.sys   Mon May 05 13:34:42 2014 (5367461A)
fffff800`07719000 fffff800`07786000   aswSP    aswSP.sys    Mon May 05 13:41:11 2014 (5367479F)
fffff800`083e5000 fffff800`083fd000   aswStm   aswStm.sys   Mon May 05 13:41:48 2014 (536747C4)
fffff800`0733d000 fffff800`07372000   aswVmm   aswVmm.sys   Thu Apr 17 16:34:55 2014 (534FB557)
fffff960`00b6d000 fffff960`00bcc000   ATMFD    ATMFD.DLL    unavailable (00000000)
fffff800`077a5000 fffff800`077b7000   BasicDisplay BasicDisplay.sys Thu Aug 22 17:09:31 2013 (5215F873)
fffff800`07797000 fffff800`077a5000   BasicRender BasicRender.sys Sat Feb 22 17:44:02 2014 (5308948A)
fffff800`0778f000 fffff800`07797000   Beep     Beep.SYS     Thu Aug 22 17:10:24 2013 (5215F8A8)
fffff800`0637c000 fffff800`06386000   BOOTVID  BOOTVID.dll  Thu Aug 22 17:10:26 2013 (5215F8AA)
fffff800`087a6000 fffff800`087c6000   bowser   bowser.sys   Thu Aug 22 17:08:38 2013 (5215F83E)
fffff960`0098b000 fffff960`009c6000   cdd      cdd.dll      unavailable (00000000)
fffff800`07200000 fffff800`0722e000   cdrom    cdrom.sys    Thu Aug 22 14:16:35 2013 (5215CFEB)
fffff800`06493000 fffff800`0651b000   CI       CI.dll       Sat Feb 22 17:42:12 2014 (5308941C)
fffff800`072e7000 fffff800`0733d000   CLASSPNP CLASSPNP.SYS Sat Mar 08 14:57:06 2014 (531AE26A)
fffff800`062e4000 fffff800`06345000   CLFS     CLFS.SYS     Wed Mar 19 13:42:20 2014 (53295164)
fffff800`06400000 fffff800`0648b000   cng      cng.sys      Sat Mar 08 14:55:08 2014 (531AE1F4)
fffff800`073f0000 fffff800`073ff000   CompositeBus CompositeBus.sys Thu Aug 22 17:08:48 2013 (5215F848)
fffff800`0829c000 fffff800`082ac000   condrv   condrv.sys   Thu Aug 22 17:10:17 2013 (5215F8A1)
fffff800`07385000 fffff800`0739a000   crashdmp crashdmp.sys Thu Aug 22 17:10:03 2013 (5215F893)
fffff800`07b70000 fffff800`07bfe000   csc      csc.sys      Thu Aug 22 17:08:00 2013 (5215F818)
fffff800`072ac000 fffff800`072d2000   dfsc     dfsc.sys     Thu Mar 06 14:52:50 2014 (53183E6A)
fffff800`071d2000 fffff800`071ee000   disk     disk.sys     Thu Aug 22 17:09:47 2013 (5215F883)
fffff800`084fd000 fffff800`08519000   drmk     drmk.sys     Thu Aug 22 17:09:24 2013 (5215F86C)
fffff800`0841e000 fffff800`0842a000   dump_diskdump dump_diskdump.sys Thu Aug 22 17:10:18 2013 (5215F8A2)
fffff800`0855b000 fffff800`08571000   dump_dumpfve dump_dumpfve.sys Sat Feb 22 17:44:48 2014 (530894B8)
fffff800`0842a000 fffff800`08447000   dump_storahci dump_storahci.sys Thu Aug 22 17:10:39 2013 (5215F8B7)
fffff800`07867000 fffff800`079e8000   dxgkrnl  dxgkrnl.sys  Thu Mar 06 14:52:58 2014 (53183E72)
fffff800`07800000 fffff800`07861000   dxgmms1  dxgmms1.sys  Thu Mar 06 14:52:14 2014 (53183E46)
fffff800`0817f000 fffff800`081f3000   e1i63x64 e1i63x64.sys Wed Mar 20 13:07:29 2013 (51496739)
fffff800`0838a000 fffff800`083c3000   fastfat  fastfat.SYS  Thu Aug 22 17:10:18 2013 (5215F8A2)
fffff800`069d1000 fffff800`069e7000   fileinfo fileinfo.sys Sat Feb 22 17:43:10 2014 (53089456)
fffff800`06975000 fffff800`069d1000   fltmgr   fltmgr.sys   Sat Feb 22 17:45:40 2014 (530894EC)
fffff800`06c62000 fffff800`06c6d000   Fs_Rec   Fs_Rec.sys   Thu Aug 22 14:16:33 2013 (5215CFE9)
fffff800`0682b000 fffff800`068c0000   fvevol   fvevol.sys   Sat Feb 22 17:41:54 2014 (5308940A)
fffff800`070e5000 fffff800`07151000   fwpkclnt fwpkclnt.sys Tue Mar 04 14:58:07 2014 (53159CA7)
fffff800`07c87000 fffff800`07c8dc00   GEARAspiWDM GEARAspiWDM.sys Fri May 04 01:26:17 2012 (4FA2E2E1)
fffff800`9178d000 fffff800`917fd000   hal      hal.dll      Sat Feb 22 17:45:53 2014 (530894F9)
fffff800`080b6000 fffff800`080cf000   HDAudBus HDAudBus.sys Thu Aug 22 17:08:37 2013 (5215F83D)
fffff800`08450000 fffff800`084b6000   HdAudio  HdAudio.sys  Thu Aug 22 17:08:19 2013 (5215F82B)
fffff800`0857d000 fffff800`0859c000   HIDCLASS HIDCLASS.SYS Thu Mar 06 14:54:40 2014 (53183ED8)
fffff800`08575000 fffff800`0857cf00   HIDPARSE HIDPARSE.SYS Thu Aug 22 17:10:26 2013 (5215F8AA)
fffff800`09800000 fffff800`0980e000   hidusb   hidusb.sys   Thu Mar 06 14:54:14 2014 (53183EBE)
fffff800`086ac000 fffff800`087a6000   HTTP     HTTP.sys     Tue Jan 28 01:18:02 2014 (52E6B7F2)
fffff800`07c92000 fffff800`080b6000   igdkmd64 igdkmd64.sys Thu Jan 23 04:12:16 2014 (52E04948)
fffff800`06e5d000 fffff800`06e6c000   intelpep intelpep.sys Sat Nov 09 14:15:55 2013 (527DF643)
fffff800`068c0000 fffff800`068de000   intelppm intelppm.sys Thu Aug 22 14:16:35 2013 (5215CFEB)
fffff800`082fc000 fffff800`08308000   iwdbus   iwdbus.sys   Wed Dec 18 04:17:38 2013 (52B0D48A)
fffff800`085e2000 fffff800`085f2000   kbdclass kbdclass.sys Thu Aug 22 17:09:23 2013 (5215F86B)
fffff800`087e7000 fffff800`087f5000   kbdhid   kbdhid.sys   Thu Aug 22 17:09:13 2013 (5215F861)
fffff800`904a3000 fffff800`904ac000   kd       kd.dll       Thu Aug 22 17:10:43 2013 (5215F8BB)
fffff800`072d2000 fffff800`072dd000   kdnic    kdnic.sys    Thu Aug 22 17:08:26 2013 (5215F832)
fffff800`082ad000 fffff800`082fc000   ks       ks.sys       Sat Feb 22 17:44:40 2014 (530894B0)
fffff800`06c36000 fffff800`06c52000   ksecdd   ksecdd.sys   Sat Sep 21 13:29:44 2013 (523D51F0)
fffff800`06a00000 fffff800`06a31000   ksecpkg  ksecpkg.sys  Sat Mar 08 14:54:07 2014 (531AE1B7)
fffff800`08519000 fffff800`0851e300   ksthunk  ksthunk.sys  Thu Aug 22 17:09:31 2013 (5215F873)
fffff800`0739a000 fffff800`073ae000   lltdio   lltdio.sys   Thu Aug 22 17:06:18 2013 (5215F7B2)
fffff800`08278000 fffff800`0829c000   luafv    luafv.sys    Sat Feb 22 17:44:25 2014 (530894A1)
fffff800`06270000 fffff800`062d6000   mcupdate_GenuineIntel mcupdate_GenuineIntel.dll Thu Aug 22 17:10:16 2013 (5215F8A0)
fffff800`08410000 fffff800`0841e000   monitor  monitor.sys  Thu Aug 22 17:06:37 2013 (5215F7C5)
fffff800`08400000 fffff800`08410000   mouclass mouclass.sys Thu Aug 22 17:09:13 2013 (5215F861)
fffff800`0859c000 fffff800`085a9000   mouhid   mouhid.sys   Thu Aug 22 17:09:13 2013 (5215F861)
fffff800`065c1000 fffff800`065dc000   mountmgr mountmgr.sys Thu Aug 22 17:10:04 2013 (5215F894)
fffff800`087c6000 fffff800`087dd000   mpsdrv   mpsdrv.sys   Thu Aug 22 17:06:06 2013 (5215F7A6)
fffff800`08600000 fffff800`0866d000   mrxsmb   mrxsmb.sys   Thu Mar 06 14:50:21 2014 (53183DD5)
fffff800`0980f000 fffff800`0985a000   mrxsmb10 mrxsmb10.sys Thu Mar 06 14:49:36 2014 (53183DA8)
fffff800`0866d000 fffff800`086a6000   mrxsmb20 mrxsmb20.sys Sat Sep 21 13:27:59 2013 (523D5187)
fffff800`077cb000 fffff800`077d7000   Msfs     Msfs.SYS     Thu Aug 22 17:10:24 2013 (5215F8A8)
fffff800`067a0000 fffff800`067aa000   msisadrv msisadrv.sys Thu Aug 22 17:09:03 2013 (5215F857)
fffff800`09a98000 fffff800`09aae000   mslldp   mslldp.sys   Thu Aug 22 17:06:07 2013 (5215F7A7)
fffff800`0651b000 fffff800`06578000   msrpc    msrpc.sys    Thu Aug 22 17:09:22 2013 (5215F86A)
fffff800`072a0000 fffff800`072ac000   mssmbios mssmbios.sys Thu Aug 22 17:09:41 2013 (5215F87D)
fffff800`06e46000 fffff800`06e5d000   mup      mup.sys      Thu Aug 22 17:10:28 2013 (5215F8AC)
fffff800`06c6d000 fffff800`06d85000   ndis     ndis.sys     Sat Feb 22 17:42:58 2014 (5308944A)
fffff800`081f3000 fffff800`081fe000   NdisVirtualBus NdisVirtualBus.sys Thu Aug 22 17:06:25 2013 (5215F7B9)
fffff800`0985a000 fffff800`09877000   Ndu      Ndu.sys      Thu Aug 22 17:05:42 2013 (5215F78E)
fffff800`07ad5000 fffff800`07ae6000   netbios  netbios.sys  Thu Aug 22 17:08:58 2013 (5215F852)
fffff800`0722e000 fffff800`0727a000   netbt    netbt.sys    Thu Aug 22 17:07:01 2013 (5215F7DD)
fffff800`06d85000 fffff800`06dfe000   NETIO    NETIO.SYS    Thu Aug 22 17:07:08 2013 (5215F7E4)
fffff800`077b7000 fffff800`077cb000   Npfs     Npfs.SYS     Thu Aug 22 17:10:25 2013 (5215F8A9)
fffff800`07294000 fffff800`072a0000   npsvctrig npsvctrig.sys Thu Aug 22 17:08:22 2013 (5215F82E)
fffff800`07a00000 fffff800`07a0e000   nsiproxy nsiproxy.sys Thu Aug 22 17:06:34 2013 (5215F7C2)
fffff800`91004000 fffff800`9178d000   nt       ntkrnlmp.exe Thu Mar 06 10:48:55 2014 (5318053F)
fffff800`06a40000 fffff800`06c36000   Ntfs     Ntfs.sys     Wed Mar 19 09:28:52 2014 (532915FC)
fffff800`07786000 fffff800`0778f000   Null     Null.SYS     Thu Aug 22 17:10:24 2013 (5215F8A8)
fffff800`07aab000 fffff800`07ad5000   pacer    pacer.sys    Thu Aug 22 17:06:06 2013 (5215F7A6)
fffff800`06594000 fffff800`065ac000   partmgr  partmgr.sys  Thu Aug 22 17:10:20 2013 (5215F8A4)
fffff800`067aa000 fffff800`067f2000   pci      pci.sys      Sat Feb 22 17:42:41 2014 (53089439)
fffff800`06c52000 fffff800`06c62000   pcw      pcw.sys      Thu Aug 22 14:16:34 2013 (5215CFEA)
fffff800`06578000 fffff800`06594000   pdc      pdc.sys      Fri Nov 01 10:28:42 2013 (52733502)
fffff800`09877000 fffff800`09920000   peauth   peauth.sys   Sat Feb 22 17:39:37 2014 (53089381)
fffff800`084b6000 fffff800`084fd000   portcls  portcls.sys  Sat Feb 22 17:41:25 2014 (530893ED)
fffff800`06367000 fffff800`0637c000   PSHED    PSHED.dll    Sat Sep 14 19:27:19 2013 (52346B3F)
fffff800`07b00000 fffff800`07b70000   rdbss    rdbss.sys    Tue Dec 17 12:51:22 2013 (52AFFB72)
fffff800`08308000 fffff800`08313000   rdpbus   rdpbus.sys   Thu Aug 22 17:08:52 2013 (5215F84C)
fffff800`06e00000 fffff800`06e46000   rdyboost rdyboost.sys Sat Feb 22 17:43:40 2014 (53089474)
fffff800`073ae000 fffff800`073c6000   rspndr   rspndr.sys   Thu Aug 22 17:06:34 2013 (5215F7C2)
fffff800`09920000 fffff800`0992b000   secdrv   secdrv.SYS   Wed Sep 13 18:48:38 2006 (4508052E)
fffff800`08172000 fffff800`0817f000   serenum  serenum.sys  Thu Aug 22 17:10:17 2013 (5215F8A1)
fffff800`07ae6000 fffff800`07b00000   serial   serial.sys   Thu Aug 22 17:10:08 2013 (5215F898)
fffff800`06386000 fffff800`063e7000   spaceport spaceport.sys Sat Feb 22 17:42:32 2014 (53089430)
fffff800`09a00000 fffff800`09a98000   srv      srv.sys      Sat Oct 05 16:31:15 2013 (524FF17B)
fffff800`09af2000 fffff800`09ba0000   srv2     srv2.sys     Thu Mar 06 14:52:30 2014 (53183E56)
fffff800`0992b000 fffff800`0996e000   srvnet   srvnet.sys   Thu Mar 06 14:50:29 2014 (53183DDD)
fffff800`065dc000 fffff800`065f9000   storahci storahci.sys Thu Aug 22 17:10:39 2013 (5215F8B7)
fffff800`068fc000 fffff800`0695b000   storport storport.sys Sat Feb 22 17:43:42 2014 (53089476)
fffff800`081fe000 fffff800`081ff600   swenum   swenum.sys   Thu Aug 22 17:09:29 2013 (5215F871)
fffff800`06e70000 fffff800`070e5000   tcpip    tcpip.sys    Tue Mar 04 15:01:29 2014 (53159D71)
fffff800`0996e000 fffff800`09980000   tcpipreg tcpipreg.sys Thu Mar 06 14:49:59 2014 (53183DBF)
fffff800`07600000 fffff800`0760e000   TDI      TDI.SYS      Thu Aug 22 17:09:01 2013 (5215F855)
fffff800`077d7000 fffff800`077f7000   tdx      tdx.sys      Thu Aug 22 17:06:34 2013 (5215F7C2)
fffff800`08156000 fffff800`08172000   TeeDriverx64 TeeDriverx64.sys Thu Sep 05 23:32:18 2013 (5228C72A)
fffff800`06345000 fffff800`06367000   tm       tm.sys       Thu Aug 22 17:09:33 2013 (5215F875)
fffff960`00725000 fffff960`0072e000   TSDDD    TSDDD.dll    unavailable (00000000)
fffff800`09aae000 fffff800`09adb000   tunnel   tunnel.sys   Thu Aug 22 17:05:45 2013 (5215F791)
fffff800`0851f000 fffff800`08535000   uaspstor uaspstor.sys Thu Aug 22 17:07:58 2013 (5215F816)
fffff800`08124000 fffff800`08156000   ucx01000 ucx01000.sys Sat Feb 22 17:41:33 2014 (530893F5)
fffff800`09980000 fffff800`099d2000   udfs     udfs.sys     Thu Aug 22 17:10:19 2013 (5215F8A3)
fffff800`071ee000 fffff800`071ff000   umbus    umbus.sys    Thu Aug 22 17:08:59 2013 (5215F853)
fffff800`09ae6000 fffff800`09af0000   umpass   umpass.sys   Thu Aug 22 17:08:58 2013 (5215F852)
fffff800`099d2000 fffff800`099fc000   usbccgp  usbccgp.sys  Wed Oct 23 13:47:41 2013 (52678625)
fffff800`0837e000 fffff800`0838a000   USBD     USBD.SYS     Thu Aug 22 17:10:22 2013 (5215F8A6)
fffff800`07c00000 fffff800`07c18000   usbehci  usbehci.sys  Thu Aug 22 17:09:15 2013 (5215F863)
fffff800`08313000 fffff800`0837e000   usbhub   usbhub.sys   Thu Aug 22 17:08:33 2013 (5215F839)
fffff800`08200000 fffff800`08278000   UsbHub3  UsbHub3.sys  Sat Mar 08 14:53:48 2014 (531AE1A4)
fffff800`07c18000 fffff800`07c87000   USBPORT  USBPORT.SYS  Thu Aug 22 17:09:40 2013 (5215F87C)
fffff800`080cf000 fffff800`08124000   USBXHCI  USBXHCI.SYS  Sat Feb 22 17:41:27 2014 (530893EF)
fffff800`067f2000 fffff800`067ff000   vdrvroot vdrvroot.sys Thu Aug 22 17:08:49 2013 (5215F849)
fffff800`065ac000 fffff800`065c1000   volmgr   volmgr.sys   Thu Aug 22 17:09:53 2013 (5215F889)
fffff800`06200000 fffff800`0625f000   volmgrx  volmgrx.sys  Thu Aug 22 17:10:23 2013 (5215F8A7)
fffff800`07176000 fffff800`071c6000   volsnap  volsnap.sys  Sat Feb 22 17:45:51 2014 (530894F7)
fffff800`079e8000 fffff800`079fa000   watchdog watchdog.sys Sat Feb 22 17:44:39 2014 (530894AF)
fffff800`0669d000 fffff800`0676c000   Wdf01000 Wdf01000.sys Thu Aug 22 17:08:56 2013 (5215F850)
fffff800`0676c000 fffff800`0677d000   WDFLDR   WDFLDR.SYS   Thu Aug 22 17:09:03 2013 (5215F857)
fffff800`062d6000 fffff800`062e4000   werkernel werkernel.sys Thu Aug 22 17:10:24 2013 (5215F8A8)
fffff800`07151000 fffff800`07176000   wfplwfs  wfplwfs.sys  Sat Mar 08 14:52:45 2014 (531AE165)
fffff960`00131000 fffff960`0054b000   win32k   win32k.sys   unavailable (00000000)
fffff800`0668a000 fffff800`06694000   WMILIB   WMILIB.SYS   Thu Aug 22 17:10:23 2013 (5215F8A7)
fffff800`06800000 fffff800`0682b000   Wof      Wof.sys      Thu Mar 13 13:57:29 2014 (53216BF1)
fffff800`09adb000 fffff800`09ae6000   WpdUpFltr WpdUpFltr.sys Thu Aug 22 17:08:45 2013 (5215F845)
fffff800`06795000 fffff800`067a0000   WppRecorder WppRecorder.sys Thu Aug 22 17:09:40 2013 (5215F87C)
fffff800`09ba0000 fffff800`09bc1000   WudfPf   WudfPf.sys   Thu Aug 22 17:07:21 2013 (5215F7F1)
fffff800`09bc1000 fffff800`09bff000   WUDFRd   WUDFRd.sys   Thu Aug 22 17:06:50 2013 (5215F7D2)


Unloaded modules:
fffff800`085c2000 fffff800`085ce000   hiber_storpo
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0000C000
fffff800`08535000 fffff800`08552000   hiber_storah
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0001D000
fffff800`085a9000 fffff800`085bf000   hiber_dumpfv
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  00016000
fffff800`09ae6000 fffff800`09af0000   umpass.sys
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0000A000
fffff800`08535000 fffff800`08547000   usbaapl64.sy
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  00012000
fffff800`085a9000 fffff800`085c2000   WinUSB.SYS
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  00019000
fffff800`085bf000 fffff800`085d1000   usbaapl64.sy
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  00012000
fffff800`085c3000 fffff800`085cf000   hiber_storpo
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0000C000
fffff800`08535000 fffff800`08552000   hiber_storah
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0001D000
fffff800`085a9000 fffff800`085bf000   hiber_dumpfv
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  00016000
fffff800`09ae6000 fffff800`09af0000   umpass.sys
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0000A000
fffff800`08535000 fffff800`0855b000   USBSTOR.SYS
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  00026000
fffff800`085a9000 fffff800`085c3000   EhStorClass.
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0001A000
fffff800`085bf000 fffff800`085cb000   hiber_storpo
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0000C000
fffff800`08535000 fffff800`08552000   hiber_storah
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0001D000
fffff800`085a9000 fffff800`085bf000   hiber_dumpfv
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  00016000
fffff800`09ae6000 fffff800`09af0000   umpass.sys
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0000A000
fffff800`085bf000 fffff800`085cb000   hiber_storpo
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0000C000
fffff800`08535000 fffff800`08552000   hiber_storah
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0001D000
fffff800`085a9000 fffff800`085bf000   hiber_dumpfv
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  00016000
fffff800`09ae6000 fffff800`09af0000   umpass.sys
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0000A000
fffff800`085bf000 fffff800`085cb000   hiber_storpo
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0000C000
fffff800`08535000 fffff800`08552000   hiber_storah
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0001D000
fffff800`085a9000 fffff800`085bf000   hiber_dumpfv
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  00016000
fffff800`09ae6000 fffff800`09af0000   umpass.sys
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0000A000
fffff800`085f2000 fffff800`085fe000   hiber_storpo
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0000C000
fffff800`08535000 fffff800`08552000   hiber_storah
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0001D000
fffff800`085a9000 fffff800`085bf000   hiber_dumpfv
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  00016000
fffff800`09ae6000 fffff800`09af0000   umpass.sys
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0000A000
fffff800`0854b000 fffff800`08557000   hiber_storpo
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0000C000
fffff800`085a9000 fffff800`085c6000   hiber_storah
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0001D000
fffff800`085c6000 fffff800`085dc000   hiber_dumpfv
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  00016000
fffff800`09ae6000 fffff800`09af0000   umpass.sys
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0000A000
fffff800`085a9000 fffff800`085b5000   hiber_storpo
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0000C000
fffff800`085b5000 fffff800`085d2000   hiber_storah
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0001D000
fffff800`08535000 fffff800`0854b000   hiber_dumpfv
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  00016000
fffff800`09ae6000 fffff800`09af0000   umpass.sys
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0000A000
fffff800`08535000 fffff800`0855b000   USBSTOR.SYS
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  00026000
fffff800`085b5000 fffff800`085d4000   HIDCLASS.SYS
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0001F000
fffff800`085a7000 fffff800`085b5000   hidusb.sys
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0000E000
fffff800`0857d000 fffff800`085a7000   usbccgp.sys
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0002A000
fffff800`085d4000 fffff800`085e2000   kbdhid.sys
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0000E000
fffff800`085f2000 fffff800`085ff000   mouhid.sys
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0000D000
fffff800`099eb000 fffff800`099f7000   hiber_storpo
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0000C000
fffff800`068de000 fffff800`068fb000   hiber_storah
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0001D000
fffff800`099d2000 fffff800`099e8000   hiber_dumpfv
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  00016000
fffff800`09ae6000 fffff800`09af0000   umpass.sys
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0000A000
fffff800`099d2000 fffff800`099eb000   WinUSB.SYS
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  00019000
fffff800`09800000 fffff800`0980c000   hiber_storpo
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0000C000
fffff800`099d2000 fffff800`099ef000   hiber_storah
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  0001D000
quit:
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``

And below are the drivers installed. Check if there is any update available to the drivers.

Code:

**************************Fri Jun 13 04:52:32.810 2014 (UTC + 5:30)**************************
GEARAspiWDM.sys             Fri May  4 01:26:17 2012 (4FA2E2E1)
e1i63x64.sys                Wed Mar 20 13:07:29 2013 (51496739)
intelppm.sys                Thu Aug 22 14:16:35 2013 (5215CFEB)
dump_storahci.sys           Thu Aug 22 17:10:39 2013 (5215F8B7)
TeeDriverx64.sys            Thu Sep  5 23:32:18 2013 (5228C72A)
iwdbus.sys                  Wed Dec 18 04:17:38 2013 (52B0D48A)
igdkmd64.sys                Thu Jan 23 04:12:16 2014 (52E04948)
aswHwid.sys                 Tue Apr  8 21:13:26 2014 (5344191E)
aswRdr2.sys                 Thu Apr 17 16:32:56 2014 (534FB4E0)
aswMonFlt.sys               Thu Apr 17 16:34:01 2014 (534FB521)
aswRvrt.sys                 Thu Apr 17 16:34:41 2014 (534FB549)
aswVmm.sys                  Thu Apr 17 16:34:55 2014 (534FB557)
aswSnx.sys                  Mon May  5 13:34:42 2014 (5367461A)
aswSP.sys                   Mon May  5 13:41:11 2014 (5367479F)
aswStm.sys                  Mon May  5 13:41:48 2014 (536747C4)

morandaminds · Jun 19, 2014

Well so far so good. I removed avast and updated the video drivers and it has been running with no blue screens for about 2 days. Keeping my fingers crossed.
Thanks blueelvis

blueelvis · Jun 19, 2014

morandaminds said:
Well so far so good. I removed avast and updated the video drivers and it has been running with no blue screens for about 2 days. Keeping my fingers crossed.
Thanks blueelvis

Sure thing. Keep me updated. In case of further problems, I would be glad to sort it out for you ^_^

Solved Fresh install 8.1 random BSOD

morandaminds

New Member

My Computer

System One

blueelvis

OMG Debugger!

My Computer

System One

morandaminds

New Member

My Computer

System One

blueelvis

OMG Debugger!

My Computer

System One

morandaminds

New Member

My Computer

System One

blueelvis

OMG Debugger!

My Computer

System One