Windows 8 and 8.1 Forums

DRIVER_POWER_STATE_FAILURE 0x0000009f after sleep

  1. #1

    Posts : 7
    Windows 8 64-bit

    DRIVER_POWER_STATE_FAILURE 0x0000009f after sleep

    Firstly, the important info:

    OS: Windows 8 64-bit
    Computer: Asus M11BB, purchased mid-April 2014
    Not overclocked.
    Using a TP-Link TP-WDN3200 N600 USB Adapter, BSODs started after updating driver due to unreliable internet.

    Get 0x0000009f bugcheck after sleeping (either manually put to sleep or automatic), also incidentally, Windows attempts to update and configure Windows Features on restart.

    2 BSODs so far, caused by usbfilter.sys & hal.dll according to BSV.

    Attached minidump files, hope I've done everything ok.

      My System SpecsSystem Spec

  2. #2

    Posts : 660
    windows 8.1

    Your dumpfiles mention FAILURE_BUCKET_ID: 0x9F_3_POWER_DOWN_netr28ux_IMAGE_usbhub.sys.

    The netr28ux is the driver for Ralink RT2860 series Wireless LAN Card.

    But you are using a TP-Link TP-WDN3200 N600 USB Adapter
    You said the BSODs started after updating driver due to unreliable internet.

    When i looked on the supportpage of your model under wireless there are 2 drivers located 1.Wireless Driver V1.00.0225 for Win8 32bit/64bit and 2. Ralink Wireless LAN Driver V4.0.3.0 for 64bit Windows 8.(WHQL).

    i suspect yopu installed the wrong driver(the Ralink) and you had to install the other driver.

    Please uninstall the Ralink driver you used and install the other driver.
      My System SpecsSystem Spec

DRIVER_POWER_STATE_FAILURE 0x0000009f after sleep
Related Threads
Hello all, I'm dealing with very annoying BSODs that I've tried figuring out on my own before posting in a forum (I'm a computer science major, it's in my nature), but I'm at a complete loss at this point. :think: Both BSODs were DRIVER_POWER_STATE_FAILURE on the Bug Check String. Bug check...
After my computer wakes up, I get a BSOD and it restarts. After running BlueScreenView, the error points to ntoskrnl.exe. Technically, my mobo supports Windows 8, but there are very limited drivers. I ran Windows 8 for close to a year with no problems but had to recently reinstalled it due to a...
Solved BSOD 0x0000009F DRIVER_POWER_STATE_FAILURE in BSOD Crashes and Debugging
I recently built 2 computers with the same specs with the purpose of mining cryptocoins. Both were working fine for about a month, but then one started crashing constantly. I can turn it on and not touch anything, and it will crash after about 15-30 minutes. I tried reinstalling windows, swapping...
Greetings. I've lately been getting a number of BSOD pop-ups when waking my computer from sleep or hibernation. Though it has happened occasionally in the past, I've noticed an increase since installing a new Blu-Ray drive. I am able to recreate the BSOD just by putting the computer to sleep,...
Today I was greeted by a message saying that my computer has recovered from serious issue. So I checked the dump files. What surprised me, there was 11 crashes overnight. This is a really fresh system, installed day before, on SSD with UEFI mode enabled. I know there are many threads about...
Hello everyone, this shall be my first post and so I hope I have followed the procedures correctly. Below I have attached the Dump ZIP folder as instructed and hopefully summarized in simplicity the problem I am having. So I just recently bought this laptop to replace my older HP TM2-2050CA...
Hi all, I have a issue when i try to stop my pc i have a bsod : Windows 8 BSOD Driver_Power_State_Failure: Bug Check Code 0x0000009F Bug Check String DRIVER_POWER_STATE_FAILURE Paramètre 1 0x0000000345474150 Paramètre 3 0x06C905F000000000 Paramètre 3...
Eight Forums Android App Eight Forums IOS App Follow us on Facebook