Windows 8 and 8.1 Forums

SATA mode selection problem

  1. #1

    Posts : 4
    windows 8

    SATA mode selection problem

    My computer has the BSOD that says inaccessible boot drive and i think its becasue of the sata mode selection. But there is only one selection AHCI when i think i need ata. I dont know if i do need it be there harddrives serial ports say ata

      My System SpecsSystem Spec

  2. #2

    Posts : 1,360
    Windows 8.1 Enterprise

    Please follow the instructions here..

    Blue Screen of Death (BSOD) Posting Instructions
      My System SpecsSystem Spec

SATA mode selection problem
Related Threads
My new laptop has currently 8.1 installed to a 500gig 840 EVO SSD, I replaced the 1tb hard drive it came with and did a clean install. I'd like to utilize the M.2 sata port with a Crucial M550 500gig drive for windows, and re-install the 1tb hard drive for storage. I have an external USB 2.5"...
Solved SATA/USB dock problem in Drivers & Hardware
Device is external sata/usb dock which has a 250Gb sata 2.5" Hdd intstalled. Did have 2 sata (HDD and CDROM) on internal ports 1 and 2. both worked fine (Hdd now in dock so I know Hdd OK and brand new cables fitted). Put new 740Gb sata on port 2 and an external dock on port 3. 740 HDD works...
How to change SATA mode to AHCI? in Drivers & Hardware
When I tried to change SATA mode to AHCI in BIOS, it bluescreened while loading. I looked up the registry tweaks, but my registry seems to already be set up for AHCI.
I have two separate instances of Win8 running on two separate IDE hard drives (both Win8's restored from same exact backup image). The one on the hard drive comected to the SATA port (via an adaptor) runs fine, but the one on the IDE connection (motherboard's only one), does not respond properly...
My problem is that, when i run a fullscreen game on my main screen and will see a movie or something else on my other screen, the video on that screen lags alot, i tryed with Flash Player, vlc and WMP, they all do it same. It looks like windows 8 go into a baggrund mode where it save performance,...
was so hoping this issue was beneath microsoft by this point: on a common intel mobile 45 chipset platform I am running ok with w8cp x64 emulating ide but would really like to do this the right way. this is the first lab rat I have really trying to polish windows 8 - very annoying can someone...
this is an ASUS X83V notebook - Setting the SATA operation to 'compatible' mode at installation, Win8 CP installed fine, no hitches. Switched BIOS to Enhanced/full mode and it fails. I recall this sort of problem from XP installs where tricks were needed to support SATA, but I do not recall...
Eight Forums Android App Eight Forums IOS App Follow us on Facebook