Windows 8 and 8.1 Forums

BSOD on sleep wake-up

  1. #1


    Montreal
    Posts : 2
    Windows 8.1

    BSOD on sleep wake-up


    I've recently been experiencing BSODs after waking my computer up from sleep mode. I had done a clean install of Windows 8, and then upgraded to 8.1. I did not initially have this issue, but it started happening around the time I made the upgrade to 8.1, although I couldn't say whether it was before or after.

    The interesting part is that the BSOD is being caused by my mouse. I know this for a fact since I had looked up my error and found a couple of forums indicating mice as possible culprits. I tried unplugging my mouse completely before waking from sleep and it did not crash! I navigated around with the keyboard for about 20 minutes, and then tried to plug the mouse back in. As soon as I had the USB port plugged back a BSOD popped up. I tried wiping the drivers and software for my mouse completely out of the device manager and starting over with new drivers, but the problem persists.

    I worked around the problem by disabling sleep, but I'd like to keep it if possible. Is this a problem with my mouse drivers or Windows sleep? It seems to me it would more likely be my mouse, given Razer only lists Windows 7 drivers on their website. What I don't understand is why it would work flawlessly for several months, and only cause issues on wake-up.

    My mouse is an old Razer Copperhead. Their latest drivers were uploaded 03 May, 2011. Razer Support

    I attached my dump files.

      My System SpecsSystem Spec

  2. #2


    Posts : 5,139
    Win8.1Pro - Finally!!!


    Unfortunately, the older Razer drivers are known to cause BSOD's.
    If the system continues to BSOD after all the suggestions that we'll make - then you'll have to get rid of the mouse. IME the chances are that you are going to have to get rid of the mouse. Please note that the Copperhead driver actually dates from 2009.

    That being said, here we go..........

    SSD's were temperamental when they first came out, but their reliability has improved greatly over the last year or two. There are 2 things that MUST be checked on systems with BSOD's and SSD's:
    1) That the SSD firmware is the latest available for the SSD. I usually can't see this info in the reports, so I rely on you to check it.
    2) That the storage controller drivers on the motherboard are the most recent. They must date from late 2012 or later. This is ALL controllers, not just the one that the SSD is attached to. If involved these should be visible in the memory dump - but it doesn't hurt to check manually.
    If your SSD is connected to the Marvell controller - then the Marvell controller must be updated (as the 2011 version is known to cause BSOD's)

    E: drive only has about 8% free space. Windows likes 15% free space in order to perform stuff "behind the scenes" without adversely affecting the system's performance. Please free up 15% on ALL hard drives (you can get away with 10% on larger drives and won't notice a large performance penalty)

    This device has problems in Device Manager:
    PCI Simple Communications Controller PCI\VEN_8086&DEV_1D3A&SUBSYS_49538086&REV_05\3&21436425&0&B0 The drivers for this device are not installed.
    It's most likely the Intel Management Engine and you can update it from these links:
    Please update the Intel Management Engine.
    Try these links:
    https://downloadcenter.intel.com/Sea...agement+engine
    https://downloadcenter.intel.com/Det...?DwnldID=21888
    If that doesn't work, then try the Lenovo links in this Google search: https://www.google.com/search?q=inte...ient=firefox-a
    Most of the BSOD errors in the WER section of MSINFO32 point directly at the Copperhead drivers. The rest point at video drivers - so I'd suggest updating them to the latest Win8.1 compatible drivers that are available.

    There are lot's of Live Kernel Event errors in the WER section of MSINFO32 also. These can be symptomatic of a hardware problem, so Please do the following:
    - open Event Viewer (run eventvwr.msc from the "Run" dialog))
    - expand the Custom Views category (left click on the > next to the words "Custom Views")
    - right click on Administrative Events
    - select "Save all Events in Custom View as..."
    - save the file as Admin.evtx
    - zip up the file (right click on it, select "Send to", select "Compressed (zipped) folder")
    - upload it with your next post (if it's too big, then upload it to a free file-hosting service and post a link here).

    While waiting for a reply, please monitor your temps with this free utility: HWMonitor CPUID - System & hardware benchmark, monitoring, reporting

    MSI Afterburner (along with Riva Tuner and EVGA Precision) are known to cause BSOD's in some Windows systems (it's driver is usually RTCore64.sys). Please un-install it immediately!

    If you're overclocking, please stop the overclock while we're troubleshooting. Feel free to resume the overclock once the system has been stabilized.

    If unable to find an update, please remove (un-install) the program responsible for that driver. DO NOT manually delete/rename the driver as it may make the system unbootable! :

    copperhd.sys Tue Nov 10 02:50:17 2009 (4AF91B39)
    Razer Diamondback
    http://www.carrona.org/drivers/driver.php?id=copperhd.sys

    RTCore64.sys Tue Sep 6 08:24:50 2011 (4E661112)
    RivaTuner/EVGA Precision/MSI Afterburner (known BSOD issues w/Win7)
    http://www.carrona.org/drivers/driver.php?id=RTCore64.sys

    mv91cons.sys Mon Nov 7 03:51:20 2011 (4EB79C08)
    Marvell 91xx Confige Device Driver for 6G SATA Controller
    http://www.carrona.org/drivers/driver.php?id=mv91cons.sys

    mvxxmm.sys Mon Nov 7 03:58:34 2011 (4EB79DBA)
    Marvell Aux NV Bridge DLL - related to mv91xx SCSI HD Controller
    http://www.carrona.org/drivers/driver.php?id=mvxxmm.sys

    mvs91xx.sys Mon Nov 7 03:58:49 2011 (4EB79DC9)
    Marvell 91xx SATA Controller Driver
    http://www.carrona.org/drivers/driver.php?id=mvs91xx.sys

    Please note the drivers below that date from before the release of Windows 8.1 (17 Oct 2013) - check to see that each and every one is compatible w/Windows 8.1 (at the manufacturer's website). If not, you must either remove the device and it's software - or locate a Windows 8.1 compatible update on the web.



    Analysis:
    The following is for informational purposes only.
    Code:
    **************************Tue Dec 10 13:15:37.052 2013 (UTC - 5:00)**************************
    Loading Dump File [C:\Users\John\SysnativeBSODApps\121013-6750-01.dmp]
    Windows 8 Kernel Version 9600 MP (12 procs) Free x64
    Built by: 9600.16422.amd64fre.winblue_gdr.131006-1505
    System Uptime:0 days 16:18:04.748
    *** WARNING: Unable to verify timestamp for copperhd.sys
    *** ERROR: Module load completed but symbols could not be loaded for copperhd.sys
    Probably caused by :copperhd.sys ( copperhd+288b )
    BugCheck 139, {3, ffffd0002b3c6340, ffffd0002b3c6298, 0}
    BugCheck Info: KERNEL_SECURITY_CHECK_FAILURE (139)
    Arguments: 
    Arg1: 0000000000000003, A LIST_ENTRY has been corrupted (i.e. double remove).
    Arg2: ffffd0002b3c6340, Address of the trap frame for the exception that caused the bugcheck
    Arg3: ffffd0002b3c6298, Address of the exception record for the exception that caused the bugcheck
    Arg4: 0000000000000000, Reserved
    BUGCHECK_STR:  0x139
    DEFAULT_BUCKET_ID:  LIST_ENTRY_CORRUPT
    PROCESS_NAME:  System
    FAILURE_BUCKET_ID: 0x139_3_copperhd+288b
    CPUID:        "Intel(R) Core(TM) i7-3930K CPU @ 3.20GHz"
    MaxSpeed:     3200
    CurrentSpeed: 3200
      BIOS Version                  SIX7910J.86A.0559.2013.0305.2337
      BIOS Release Date             03/05/2013
      Manufacturer                                                  
      Product Name                                                  
    ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
    **************************Mon Dec  9 20:21:15.343 2013 (UTC - 5:00)**************************
    Loading Dump File [C:\Users\John\SysnativeBSODApps\120913-7062-01.dmp]
    Windows 8 Kernel Version 9600 MP (12 procs) Free x64
    Built by: 9600.16422.amd64fre.winblue_gdr.131006-1505
    System Uptime:0 days 5:30:16.038
    *** WARNING: Unable to verify timestamp for copperhd.sys
    *** ERROR: Module load completed but symbols could not be loaded for copperhd.sys
    Probably caused by :copperhd.sys ( copperhd+288b )
    BugCheck 139, {3, ffffd0002aeac340, ffffd0002aeac298, 0}
    BugCheck Info: KERNEL_SECURITY_CHECK_FAILURE (139)
    Arguments: 
    Arg1: 0000000000000003, A LIST_ENTRY has been corrupted (i.e. double remove).
    Arg2: ffffd0002aeac340, Address of the trap frame for the exception that caused the bugcheck
    Arg3: ffffd0002aeac298, Address of the exception record for the exception that caused the bugcheck
    Arg4: 0000000000000000, Reserved
    BUGCHECK_STR:  0x139
    DEFAULT_BUCKET_ID:  LIST_ENTRY_CORRUPT
    PROCESS_NAME:  System
    FAILURE_BUCKET_ID: 0x139_3_copperhd+288b
    CPUID:        "Intel(R) Core(TM) i7-3930K CPU @ 3.20GHz"
    MaxSpeed:     3200
    CurrentSpeed: 3200
      BIOS Version                  SIX7910J.86A.0559.2013.0305.2337
      BIOS Release Date             03/05/2013
      Manufacturer                                                  
      Product Name                                                  
    ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
    **************************Mon Dec  9 14:50:09.859 2013 (UTC - 5:00)**************************
    Loading Dump File [C:\Users\John\SysnativeBSODApps\120913-6656-02.dmp]
    Windows 8 Kernel Version 9600 MP (12 procs) Free x64
    Built by: 9600.16422.amd64fre.winblue_gdr.131006-1505
    System Uptime:0 days 1:33:55.554
    *** WARNING: Unable to verify timestamp for copperhd.sys
    *** ERROR: Module load completed but symbols could not be loaded for copperhd.sys
    Probably caused by :copperhd.sys ( copperhd+288b )
    BugCheck 139, {3, ffffd0002ad2a340, ffffd0002ad2a298, 0}
    BugCheck Info: KERNEL_SECURITY_CHECK_FAILURE (139)
    Arguments: 
    Arg1: 0000000000000003, A LIST_ENTRY has been corrupted (i.e. double remove).
    Arg2: ffffd0002ad2a340, Address of the trap frame for the exception that caused the bugcheck
    Arg3: ffffd0002ad2a298, Address of the exception record for the exception that caused the bugcheck
    Arg4: 0000000000000000, Reserved
    BUGCHECK_STR:  0x139
    DEFAULT_BUCKET_ID:  LIST_ENTRY_CORRUPT
    PROCESS_NAME:  System
    FAILURE_BUCKET_ID: 0x139_3_copperhd+288b
    CPUID:        "Intel(R) Core(TM) i7-3930K CPU @ 3.20GHz"
    MaxSpeed:     3200
    CurrentSpeed: 3200
      BIOS Version                  SIX7910J.86A.0559.2013.0305.2337
      BIOS Release Date             03/05/2013
      Manufacturer                                                  
      Product Name                                                  
    ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
    **************************Mon Dec  9 13:15:26.083 2013 (UTC - 5:00)**************************
    Loading Dump File [C:\Users\John\SysnativeBSODApps\120913-6953-01.dmp]
    Windows 8 Kernel Version 9600 MP (12 procs) Free x64
    Built by: 9600.16422.amd64fre.winblue_gdr.131006-1505
    System Uptime:0 days 9:50:03.779
    *** WARNING: Unable to verify timestamp for copperhd.sys
    *** ERROR: Module load completed but symbols could not be loaded for copperhd.sys
    Probably caused by :copperhd.sys ( copperhd+288b )
    BugCheck 139, {3, ffffd00023d9d340, ffffd00023d9d298, 0}
    BugCheck Info: KERNEL_SECURITY_CHECK_FAILURE (139)
    Arguments: 
    Arg1: 0000000000000003, A LIST_ENTRY has been corrupted (i.e. double remove).
    Arg2: ffffd00023d9d340, Address of the trap frame for the exception that caused the bugcheck
    Arg3: ffffd00023d9d298, Address of the exception record for the exception that caused the bugcheck
    Arg4: 0000000000000000, Reserved
    BUGCHECK_STR:  0x139
    DEFAULT_BUCKET_ID:  LIST_ENTRY_CORRUPT
    PROCESS_NAME:  System
    FAILURE_BUCKET_ID: 0x139_3_copperhd+288b
    CPUID:        "Intel(R) Core(TM) i7-3930K CPU @ 3.20GHz"
    MaxSpeed:     3200
    CurrentSpeed: 3200
      BIOS Version                  SIX7910J.86A.0559.2013.0305.2337
      BIOS Release Date             03/05/2013
      Manufacturer                                                  
      Product Name                                                  
    ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
    **************************Mon Dec  9 03:24:33.951 2013 (UTC - 5:00)**************************
    Loading Dump File [C:\Users\John\SysnativeBSODApps\120913-6656-01.dmp]
    Windows 8 Kernel Version 9600 MP (12 procs) Free x64
    Built by: 9600.16422.amd64fre.winblue_gdr.131006-1505
    System Uptime:0 days 5:09:10.647
    *** WARNING: Unable to verify timestamp for copperhd.sys
    *** ERROR: Module load completed but symbols could not be loaded for copperhd.sys
    Probably caused by :copperhd.sys ( copperhd+288b )
    BugCheck 139, {3, ffffd00024d58340, ffffd00024d58298, 0}
    BugCheck Info: KERNEL_SECURITY_CHECK_FAILURE (139)
    Arguments: 
    Arg1: 0000000000000003, A LIST_ENTRY has been corrupted (i.e. double remove).
    Arg2: ffffd00024d58340, Address of the trap frame for the exception that caused the bugcheck
    Arg3: ffffd00024d58298, Address of the exception record for the exception that caused the bugcheck
    Arg4: 0000000000000000, Reserved
    BUGCHECK_STR:  0x139
    DEFAULT_BUCKET_ID:  LIST_ENTRY_CORRUPT
    PROCESS_NAME:  System
    FAILURE_BUCKET_ID: 0x139_3_copperhd+288b
    CPUID:        "Intel(R) Core(TM) i7-3930K CPU @ 3.20GHz"
    MaxSpeed:     3200
    CurrentSpeed: 3200
      BIOS Version                  SIX7910J.86A.0559.2013.0305.2337
      BIOS Release Date             03/05/2013
      Manufacturer                                                  
      Product Name                                                  
    ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
    **************************Sun Dec  8 17:24:25.977 2013 (UTC - 5:00)**************************
    Loading Dump File [C:\Users\John\SysnativeBSODApps\120813-7593-01.dmp]
    Windows 8 Kernel Version 9600 MP (12 procs) Free x64
    Built by: 9600.16422.amd64fre.winblue_gdr.131006-1505
    System Uptime:0 days 23:54:10.141
    *** WARNING: Unable to verify timestamp for copperhd.sys
    *** ERROR: Module load completed but symbols could not be loaded for copperhd.sys
    Probably caused by :copperhd.sys ( copperhd+288b )
    BugCheck 139, {3, ffffd0002b52d340, ffffd0002b52d298, 0}
    BugCheck Info: KERNEL_SECURITY_CHECK_FAILURE (139)
    Arguments: 
    Arg1: 0000000000000003, A LIST_ENTRY has been corrupted (i.e. double remove).
    Arg2: ffffd0002b52d340, Address of the trap frame for the exception that caused the bugcheck
    Arg3: ffffd0002b52d298, Address of the exception record for the exception that caused the bugcheck
    Arg4: 0000000000000000, Reserved
    BUGCHECK_STR:  0x139
    DEFAULT_BUCKET_ID:  LIST_ENTRY_CORRUPT
    PROCESS_NAME:  System
    FAILURE_BUCKET_ID: 0x139_3_copperhd+288b
    CPUID:        "Intel(R) Core(TM) i7-3930K CPU @ 3.20GHz"
    MaxSpeed:     3200
    CurrentSpeed: 3200
      BIOS Version                  SIX7910J.86A.0559.2013.0305.2337
      BIOS Release Date             03/05/2013
      Manufacturer                                                  
      Product Name                                                  
    ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
    **************************Sat Dec  7 17:29:25.980 2013 (UTC - 5:00)**************************
    Loading Dump File [C:\Users\John\SysnativeBSODApps\120713-8781-01.dmp]
    Windows 8 Kernel Version 9600 MP (12 procs) Free x64
    Built by: 9600.16422.amd64fre.winblue_gdr.131006-1505
    System Uptime:1 days 19:35:42.674
    *** WARNING: Unable to verify timestamp for copperhd.sys
    *** ERROR: Module load completed but symbols could not be loaded for copperhd.sys
    Probably caused by :copperhd.sys ( copperhd+288b )
    BugCheck 139, {3, ffffd0002a962340, ffffd0002a962298, 0}
    BugCheck Info: KERNEL_SECURITY_CHECK_FAILURE (139)
    Arguments: 
    Arg1: 0000000000000003, A LIST_ENTRY has been corrupted (i.e. double remove).
    Arg2: ffffd0002a962340, Address of the trap frame for the exception that caused the bugcheck
    Arg3: ffffd0002a962298, Address of the exception record for the exception that caused the bugcheck
    Arg4: 0000000000000000, Reserved
    BUGCHECK_STR:  0x139
    DEFAULT_BUCKET_ID:  LIST_ENTRY_CORRUPT
    PROCESS_NAME:  System
    FAILURE_BUCKET_ID: 0x139_3_copperhd+288b
    CPUID:        "Intel(R) Core(TM) i7-3930K CPU @ 3.20GHz"
    MaxSpeed:     3200
    CurrentSpeed: 3200
      BIOS Version                  SIX7910J.86A.0559.2013.0305.2337
      BIOS Release Date             03/05/2013
      Manufacturer                                                  
      Product Name                                                  
    ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
    **************************Thu Dec  5 21:52:49.947 2013 (UTC - 5:00)**************************
    Loading Dump File [C:\Users\John\SysnativeBSODApps\120513-8625-01.dmp]
    Windows 8 Kernel Version 9600 MP (12 procs) Free x64
    Built by: 9600.16422.amd64fre.winblue_gdr.131006-1505
    System Uptime:9 days 17:20:38.587
    *** WARNING: Unable to verify timestamp for copperhd.sys
    *** ERROR: Module load completed but symbols could not be loaded for copperhd.sys
    Probably caused by :copperhd.sys ( copperhd+288b )
    BugCheck 139, {3, ffffd00023e9b340, ffffd00023e9b298, 0}
    BugCheck Info: KERNEL_SECURITY_CHECK_FAILURE (139)
    Arguments: 
    Arg1: 0000000000000003, A LIST_ENTRY has been corrupted (i.e. double remove).
    Arg2: ffffd00023e9b340, Address of the trap frame for the exception that caused the bugcheck
    Arg3: ffffd00023e9b298, Address of the exception record for the exception that caused the bugcheck
    Arg4: 0000000000000000, Reserved
    BUGCHECK_STR:  0x139
    DEFAULT_BUCKET_ID:  LIST_ENTRY_CORRUPT
    PROCESS_NAME:  System
    FAILURE_BUCKET_ID: 0x139_3_copperhd+288b
    CPUID:        "Intel(R) Core(TM) i7-3930K CPU @ 3.20GHz"
    MaxSpeed:     3200
    CurrentSpeed: 3200
      BIOS Version                  SIX7910J.86A.0559.2013.0305.2337
      BIOS Release Date             03/05/2013
      Manufacturer                                                  
      Product Name                                                  
    ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
    
    3rd Party Drivers:
    The following is for information purposes only.
    Any drivers in red should be updated or removed from your system. And should have been discussed in the body of my post.
    Code:
    **************************Tue Dec 10 13:15:37.052 2013 (UTC - 5:00)**************************
    copperhd.sys                Tue Nov 10 02:50:17 2009 (4AF91B39)
    RTCore64.sys                Tue Sep  6 08:24:50 2011 (4E661112)
    mv91cons.sys                Mon Nov  7 03:51:20 2011 (4EB79C08)
    mvxxmm.sys                  Mon Nov  7 03:58:34 2011 (4EB79DBA)
    mvs91xx.sys                 Mon Nov  7 03:58:49 2011 (4EB79DC9)
    speedfan.sys                Sat Dec 29 15:59:35 2012 (50DF59B7)
    e1i63x64.sys                Wed Mar 20 03:37:29 2013 (51496739)
    SCDEmu.SYS                  Mon Apr 15 05:37:12 2013 (516BCA48)
    nvhda64v.sys                Sun Jun 16 08:38:07 2013 (51BDB1AF)
    dump_iaStorAV.sys           Wed Jul 31 20:00:49 2013 (51F9A531)
    iaStorAV.sys                Wed Jul 31 20:00:49 2013 (51F9A531)
    e1c64x64.sys                Wed Aug 21 06:09:36 2013 (521491E0)
    intelppm.sys                Thu Aug 22 04:46:35 2013 (5215CFEB)
    RTKVHD64.sys                Fri Sep 13 06:46:51 2013 (5232ED1B)
    nvlddmkm.sys                Wed Oct 23 02:21:50 2013 (52676AFE)
    ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
    **************************Mon Dec  9 20:21:15.343 2013 (UTC - 5:00)**************************
    PLTGC.sys                   Wed Nov 14 21:04:25 2012 (50A44DA9)
    
    http://www.carrona.org/drivers/driver.php?id=copperhd.sys
    http://www.carrona.org/drivers/driver.php?id=RTCore64.sys
    http://www.carrona.org/drivers/driver.php?id=mv91cons.sys
    http://www.carrona.org/drivers/driver.php?id=mvxxmm.sys
    http://www.carrona.org/drivers/driver.php?id=mvs91xx.sys
    http://www.carrona.org/drivers/driver.php?id=speedfan.sys
    http://www.carrona.org/drivers/driver.php?id=e1i63x64.sys
    http://www.carrona.org/drivers/driver.php?id=SCDEmu.SYS
    http://www.carrona.org/drivers/driver.php?id=nvhda64v.sys
    dump_iaStorAV.sys - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.
    iaStorAV.sys - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.
    e1c64x64.sys - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.
    http://www.carrona.org/drivers/driver.php?id=intelppm.sys
    http://www.carrona.org/drivers/driver.php?id=RTKVHD64.sys
    http://www.carrona.org/drivers/driver.php?id=nvlddmkm.sys
    http://www.carrona.org/drivers/driver.php?id=PLTGC.sys
      My System SpecsSystem Spec

  3. #3


    Montreal
    Posts : 2
    Windows 8.1


    usasma,

    Thank you for replying to my thread, and for the useful list of information! Here's what I've done:


    • I updated all the drivers possible and fixed issues in the device manager. It was IME after all.
    • I could not find any updates through Intel's site nor through Marvell directly for newer SATA controller drivers. That being said, I've double checked my SATA ports, and all of my drives are currently using the Intel chipset controller.
    • Good advice on the SSD firmware. I verified and there is a large firmware update on Kingston's site. The current version is 507KC4 where as mine has 502 firmware. I know updating SSD firmware required formatting, so I'll update firmware on my next install, maybe sooner rather than later.
    • Uninstalled MSI Afterburner.
    • Using the event viewer, I get an error where it cannot find the file specified and displays partial results. I was able to see over 3000 events in the list, but unable to save all. Either the list is too big or there's something else happening there. I saved the latest 256 events and attached them here.
      My System SpecsSystem Spec

  4. #4


    Posts : 5,139
    Win8.1Pro - Finally!!!


    There are e1iexpress and e1cexpress errors in the vicinity of each shutdown.
    Please:
    - download a fresh set of the latest, Win8.1 compatible ethernet drivers for your ethernet ports
    If not available from the motherboard/system manufacturer, then locate them at http://downloadcenter.intel.com
    - uninstall the current drivers for your ethernet ports
    - install the freshly downloaded drivers
    - monitor for further BSOD's
      My System SpecsSystem Spec

BSOD on sleep wake-up
Related Threads
Hello. After a few weeks of fruitlessly searching through similar threads for a permanent fix to my recurring BSOD problem, I decided I'd have to investigate deeper into my particular problem, hopefully with the help of the nice people here at eightforums. Ever since the beginning of July I've...
Hi, I need help. My Lenovo U310 is crushing with BSOD every time I wake him up from sleep. Here are reports from my laptop. Thanks for any help. Kaper
someone pls my hp pavilion dv6 6514nr sleeps when i close the lid and anytime i try to open it up it it crashes with the BSOD: system thread exception not handled screen i tried using blue screen view to read the dump files but it showed me it had something to do with ntoskrnl.exe and i really...
Well I thought I had it worked out but apparently not. After updating my atheros drivers I haven't had a BSOD on wake up for at least 20 or so sleep/wake cycles. Now I see a message that's a little different: irql_not_lessC_or_equal...(ath...) forgot to get a screen grab so I don't remember what...
I updated to Windows 8.1 approximately two weeks ago and now when ever I sleep my computer it cannot wake and will instead BSOD. http://www.filedropper.com/120113-16750-01 The above link is to a zip file containing the dmp file from the most recent time this happened. Any help finding the...
Hello, I thought I already had my portion of "luck" with Win 8.1 but it's not over yet. My other two threads: https://www.eightforums.com/installation-setup/31157-windows-8-1-rtm-installation-fails-dell-xps-1340-a.html (Solved)...
BSOD After Wake from Sleep in BSOD Crashes and Debugging
I am randomly facing a BSOD when my PC wakes from sleep. This usually happens when Windows goes to sleep automatically and then I try to wake it after a while. However when I put my PC into sleep manually I don't face the issue when it resumes again. I really appreciate if someone can help me...
Eight Forums Android App Eight Forums IOS App Follow us on Facebook