Windows 8 and 8.1 Forums

Bsod irql_not_less_or_equal

  1. #11

    Posts : 8
    Windows 8.1 Single Language

    No, I have not overclocked my laptop (unless I did without realizing so). Could unparking/parking CPU be a possible cause? I remember doing something like that quite sometime ago (but I was pretty sure I undid it after I was done).

      My System SpecsSystem Spec

  2. #12

    Posts : 5,139
    Win8.1Pro - Finally!!!

    I think it's my not understanding the report - rather than your overclocking. Don't worry about it for now, just finish the hardware diagnostics and we'll figure out where to go from there.
      My System SpecsSystem Spec

  3. #13

    Posts : 8
    Windows 8.1 Single Language

    I don't know if using a Windows-runnable HDD test will suffice (SeaTools for Windows | Seagate) but I had it perform a "Fix All Long" test and passed.

    --------------- SeaTools for Windows v1.2.0.8 ---------------13/11/2013 7:55:49 PM
    Model: ST1000LM024 HN-M101MBB
    Serial Number: S2SMJ9GD418850
    Firmware Revision: 2AR20002
    Fix All Long - Pass 13/11/2013 7:55:49 PM
    Do I still have to do a bootable HDD test?

    TDSSKiller found no threats. Kaspersky Security Scan found no threats (just a bunch of alerts about my computer having autorun enabled).

    And like I have mentioned in my previous post, memtest86 passed 4 times with no errors.
      My System SpecsSystem Spec

  4. #14

    Posts : 5,139
    Win8.1Pro - Finally!!!

    Memtest - passed
    HDD test - passed (Windows test is OK)
    Malware scan - passed

    What about these tests? (from this link: Hardware Diagnostics )
    Video 1 (FurMark) - ?
    Prime95 - ?
    Video 2 (the 5 tests) - ?
    CPU Stress tests - ?
      My System SpecsSystem Spec

  5. #15

    Posts : 8
    Windows 8.1 Single Language

    I ran Furmark with SLI settings enabled, put it to fullscreen and tried both forcing alternate frame rendering 1 and 2 but my 2nd GPU doesn't seem to be getting any GPU load. I ran it for 15.5 minutes and GPU 1 hit 88 degrees C but 2nd GPU was still hovering around 40 degrees C. What seems to be the problem here? How do I get the 2nd GPU to work? (I tried the methods here [TIPS] How to Enable SLI and CrossFire Support for OpenGL Applications | Geeks3D except for the renaming methods).

    Also, just to verify, for Prime95, the number of torture test threads to run for me is 8, right?

    Intel Processor Diagnostics passed as well.

    --- Testing Processor 1 ---
    --- IPDT64 - rev ---
    --- Start Time: 11/13/2013 22:47:57---
    --- Skipping Config ---
     --- Reading CPU Manufacturer --- 
    Expected --> GenuineIntel
    Detected --> GenuineIntel
    Found --- Genuine Intel Processor ---
     --- Temperature Test --- 
    Temperature Test Passed!!!
    Temperature = 37 degrees C below maximum.
     --- Reading Brand String --- 
    Detected Brand String:
    Intel Core i7-3630QM   2.40GHz
    Brand String Test Passed!!!
     --- Reading CPU Frequency --- 
    Expected CPU Frequency is --> 2.40
    Detected CPU Frequency is --> 2.39452
    CPU Frequency Test Passed!!!
     --- FSB NOT Supported on this Processor --- 
     --- Running Base Clock test --- 
    Detected Base Clock --> 99
    Base Clock test Pass ---
    ..QPI rate Test not supported..
    ..Skipping QPI rate Test..
    Skipping QPI rate Test
     --- Running Floating Point test --- 
    Million Floating Points per Second, MFLOPS --> 374.4
    Floating Point Test Pass ---
     --- Running Prime Number Generation Test --- 
    Operation Per Second--> 2.65832e+006
    Prime Number Generation Test Pass ---
     --- Reading Cache Size ---  
    - Detected L1 Data Cache Size --> 4 x 32
    - Detected L1 Inst Cache Size --> 4 x 32
    - Detected L2 Cache Size --> 1024
    - Detected L3 Cache Size --> 6144
     Cache Size Test Passed!!!
     --- Determining MMX - SSE capabilities --- 
             --- CPU FEATURES DETECTION FOR ---
                    ---        MMX SSE       ---
    MMX         - MMX Supported -->    Yes
    SSE         - SSE Supported -->    Yes
    SSE2         - SSE2 Supported -->    Yes
    SSE3         - SSE3 Supported -->    Yes
    SSSE3         - SSSE3 Supported -->    Yes
    SSE4.1         - SSE4.1 Supported -->    Yes
    SSE4.2         - SSE4.2 Supported -->    Yes
            --- MMX SSE - capabilities check complete ---
    MMX Test Result --- PASS
    SSE Test Result --- PASS
    SSE2 Test Result --- PASS
    SSE3 Test Result --- PASS
    SSSE3 Test Result --- PASS
    SSE4.1 Test Result --- PASS
    SSE4.2 Test Result --- PASS
    MMX SSE Testing Passed !! 
     --- Determining AVX AES PCLMULQDQ capabilities --- 
             --- CPU FEATURES DETECTION FOR ---
                   --- AVX/AES/PCLMULQDQ ---
    AVX         - Advanced Vector Extensions Supported -->    Yes
    AVX OS Support   - AVX Operating System Supported -->        Yes
    AES         - Advanced Encryption Standard Supported -->    Yes
    PCLMULQDQ     - Polys Carry-Less Multiply Supported -->    Yes
        --- AVX AES PCLMULQDQ capabilities check complete ---
    AVX Compare Test Result --- PASS
    AES Test Result --- PASS
    PCLMULQDQ Test Result --- PASS
    AVX AES PCLMULQDQ Testing Passed !! 
    --- Reading Memory Size --- 
    Detected Memory Size is --> 8.00GB
    --- Integrated Memory Controller Stress Test --- 
    --- Integrated Memory Controller Stress Test Pass!!! --- 
    Integrated Memory Controller Test Pass!!!
    --- Platform Controller Hub Test Disabled ---
    ..Query 2..
    --- Querying for Intel(R) Integrated Graphics Device (IGD) ---
    ..Did not detect Intel(R) Integrated Graphics Device (IGD).
    ..This could be that the test platform is using a discrete graphics card.
    ..To test IGD, verify that there is an onboard video connector, 
    ..shutdown the test platform, remove the graphics card, and 
    ..move video cable from graphics card to onboard video connector 
    ..Skipping Intel(R) Integrated Graphics Device Presence Test..
     --- CPU Load --- 
     --- Load Level = 8
    CPU Load Passed!!!
     --- Temperature Test --- 
    Temperature Test Passed!!!
    Temperature = 28 degrees C below maximum.
    --- Test End Time: 11/13/2013 22:51:56---

    A question, is it really safe for GPU temps to reach around 90 degrees C and above? I'm worried it may cause problems with my GPU instead of fixing any (thermal paste drying up)?
      My System SpecsSystem Spec

  6. #16

    Posts : 5,139
    Win8.1Pro - Finally!!!

    You have problems with the video - 88șC is just too high IMO.
    Run the other video tests and watch the temps.

    Another option is to remove the SLI and test each card individually.

    FWIW - I don't know anything about SLI, so you'd be better off asking in the Graphics Cards forum: Graphic Cards - Windows 8 Forums
      My System SpecsSystem Spec

Page 2 of 2 FirstFirst 12
Bsod irql_not_less_or_equal
Related Threads
Bsod - irql_not_less_or_equal in BSOD Crashes and Debugging
Hello, i'm using a new Windows 8.1 Home Premium Acer Desktop. I got it a few weeks ago, and about every week I have another BSOD. I'm getting tired of constantly loosing work because of this. I just had another one about 10 minutes ago. All of the BSOD say "IRQL_NOT_LESS_OR_EQUAL". I used a tool...
Bsod irql_not_less_or_equal in BSOD Crashes and Debugging
I did a clean reinstall of Windows yesterday because it was having some issues, and while downloading programs/games again I've been getting BSODs every few hours. I had errors with drivers when I first built this computer but I'm hoping that they're compatible/updated to be compatible with 8.1 by...
Bsod irql_not_less_or_equal Win 8 Laptop in BSOD Crashes and Debugging
Hello, I have experienced several bsods lately, strangely when i am using Chrome (on youtube), i had some bsod on the past and for a time i though it were solved, but now they are back, the last were: IRQL_NOT_LESS_OR_EQUAL (today) PAGE_FAULT_IN_NONPAGED_AREA (2 days ago) ...
Help! Windows 8 BSOD : IRQL_NOT_LESS_OR_EQUAL in BSOD Crashes and Debugging
Hi all, Recently my Asus laptop just got a BSOD which says 'IRQL_NOT_LESS_OR_EQUAL'. I have no idea what is the cause of this. I have read the BSOD posting instructions and I have followed option 1 : to use SF diagnostic tool. Thanks! 37002
Solved Bsod irql_not_less_or_equal in BSOD Crashes and Debugging
Just now i had a bsod, according to whocrashed its a driver issue, yesterday i updated some programs (ccleaner and teamviewer) , and also downloaded a new vertion of hwinfo (portable).
Bsod - irql_not_less_or_equal in BSOD Crashes and Debugging
hi, can anyone help? i just got this bsod IRQL_NOT_LESS_OR_EQUAL while playing battlefield 3, when i check using bluescreenview, it highlights ntoskernel.exe, which is weird -_- so, please, anyone who can, help meeeee
irql_not_less_or_equal bsod in BSOD Crashes and Debugging
Usually once a day I get a bsod of irql_not_less_or_equal. Almost certain it has to do with my Netgear wireless driver. Each time I get the bsod, I have to re install the Netgear driver to get access to the internet once again. I have used the most up to date drivers before, but I will still get...
Eight Forums Android App Eight Forums IOS App Follow us on Facebook