Windows 8 and 8.1 Forums

Different kinds of BSODS after computer sleep

  1. #1

    Posts : 1
    Windows 8

    Different kinds of BSODS after computer sleep

    I'm using windows 8 pro. I recently formatted my windows drive and re-installed windows 8 because I was getting black screen after logging in. I found that it was connected to Avast, so when I re-installed windows I moved to AVG.
    I'm getting now BSOD couple of minutes after my computer wakes up from sleep mode. Every time I get a different error:

    and more...

    I have used the SF Diagnostic Tool and attached the .zip file to my post.

    I would really appreciate any help given.
    Thank you for your time!

      My System SpecsSystem Spec

  2. #2

    Posts : 5,139
    Win8.1Pro - Finally!!!

    The differing error codes are usually symptomatic of a lower level problem within the system. They are usually caused by one of these things:
    - borked (broken) hardware (several different procedures used to isolate the problem device)
    - BIOS issues (check for updates at the motherboard manufacturer's website)
    - overclocking - You'll know if you're overclocking or not. If uncertain we can suggest things to check.
    - compatibility issues (3rd party hardware/drivers)
    - low-level driver problems
    - or even malware (scanned for when we ask for hardware diagnostics from Initial Hardware Diagnostics or Hardware Diagnostics ).

    You can get a head start on the hardware diagnostics if you'd like - they are located here: Hardware Diagnostics
    No memory dumps in the uploaded reports. Please do this:
    Upload Dump Files:
    NOTE: If using a disk cleaning utility, please stop using it while we are troubleshooting your issues.
    Please go to C:\Windows\Minidump and zip up the contents of the folder. Then upload/attach the .zip file with your next post.
    Left click on the first minidump file.
    Hold down the "Shift" key and left click on the last minidump file.
    Right click on the blue highlighted area and select "Send to"
    Select "Compressed (zipped) folder" and note where the folder is saved.
    Upload that .zip file with your next post.

    If you have issues with "Access Denied" errors, try copying the files to your desktop and zipping them up from there. If it still won't let you zip them up, post back for further advice.

    If you don't have anything in that folder, please check in C:\Windows for a file named MEMORY.DMP. If you find it, zip it up and upload it to a free file hosting service. Then post the link to it in your topic so that we can download it.

    Also, search your entire hard drive for files ending in .dmp, .mdmp, and .hdmp. Zip up any that you find and upload them with your next post.

    Then, follow the directions here to set your system for Minidumps (much smaller than the MEMORY.DMP file): Set MiniDumpMore info on dump file options here: Overview of memory dump file options for Windows 2000, Windows XP, Windows Server 2003, Windows Vista, Windows Server 2008, Windows 7, and Windows Server 2008 R2
    Only 54 Windows Updates installed. Most systems have 66 or more. Please visit Windows Update and get ALL available updates (it may take several trips to get them all).

    You have a Edimax 802.11n Wireless USB Adapter:
    I do not recommend using wireless USB network devices. Especially in Win7/Win8 systems.
    These wireless USB devices have many issues with Win7(and I suspect with Win8) - using Vista drivers with them is almost sure to cause a BSOD.
    Should you want to keep using these devices, be sure to have Win7/Win8 drivers - DO NOT use Vista drivers!!!
    An installable wireless PCI/PCIe card that's plugged into your motherboard is much more robust, reliable, and powerful.
    SSD's were temperamental when they first came out, but their reliability has improved greatly over the last year or two. There are 2 things that MUST be checked on systems with BSOD's and SSD's:
    1) That the SSD firmware is the latest available for the SSD
    2) That the storage controller drivers on the motherboard are the most recent. They must date from late 2012 or later. This is ALL controllers, not just the one that the SSD is attached to.
    This device can't start:
    Intel(R) Management Engine Interface PCI\VEN_8086&DEV_1C3A&SUBSYS_1C3A1458&REV_04\3&13C0B0C5&0&B0 This device cannot start.
    Please visit the manufacturer's website and download/install the latest, Win8 compatible version of the Intel Management Engine. If not available from the manufacturer, check for it at

    Daemon Tools (and Alcohol % software) are known to cause BSOD's on some Windows systems (mostly due to the sptd.sys driver, although I have seen dtsoftbus01.sys blamed on several occasions).
    Please un-install the program, then use the following free tool to ensure that the troublesome sptd.sys driver is removed from your system (pick the 32 or 64 bit system depending on your system's configuration): [S] DuplexSecure - FAQ [/S] Link broken as of 21 Jul 2012
    New link (15 Aug 2012): DuplexSecure - Downloads (pick the appropriate version for your system and select "Un-install" when you run it).
    Alternate link:
    Manual procedure here: Registry and SPTD problems | DAEMON Pro Help
    If all of this doesn't stop the BSOD's, please run these free hardware diagnostics: Hardware Diagnostics. Let us know the results and we can move on from there.
      My System SpecsSystem Spec

Different kinds of BSODS after computer sleep
Related Threads
Solved BSODs after waking computer from sleep mode in BSOD Crashes and Debugging
Hi, I have been getting frequent BSODs after waking my computer from sleep mode. The error names fluctuate but the three that I have seen the most often are "DPC_Watchdog_violation", "Bad_Pool_Header" and "Kernel_security_check_violation". I would greatly appreciate any help in resolving this...
Solved Multiple BSODs after Wakeup from sleep in BSOD Crashes and Debugging
I turned my PC into a Hackintosh: hangs after wakeup from sleep. Once a frozen desktop, but the cursor would move. So I switched to Windows 8.1: Multiple BSODs after Wakeup from sleep. Once a frozen desktop, but the cursor would move. I got many different BSODs, usually a sign of a hardware...
Hello, i've been having 3 different BSODs the last while. SYSTEM_SERVICE_EXCEPTION, KERNEL_DATA_INPAGE_ERROR, and SYSTEM_THREAD_EXCEPTION_NOT_HANDLED. The bug check codes are 0x1000007e or 0x0000003b for the system_service_exception. My laptop is running windows 8.1, it is an Asus G46vw. ...
I have a Samsung Series 5 laptop that I got last summer that has given me a series of problems, the biggest of which was the Windows 8.1 upgrade. That's been undone now and it boots properly and works well again, except that when starting up, or waking from sleep, it will restart and give me the...
I built the computer and got everything running fine. I started transferring games onto steam from my previous (ultra-low end for gaming apu) laptop and during this process thought it would be a good idea to download windows 8.1. I had some issues with an hdmi cable going to my hdtv that I use...
All kinds of BSOD, Help! in BSOD Crashes and Debugging
I installed windows 8 a few weeks ago on a brand new HDD and ever since I have started to have BSOD apperaing every now and then and it is never the same problem. I have been running all kinds of memory and disc tests and verifiers, virus scans but no errors are found. I have also reinstalled...
New Computer, already 5 BSODs in a row in BSOD Crashes and Debugging
Computer is only a few days old, but I have put quite a bit on it setting it up. Only had iTunes running and then I got a BSOD, then one immeditaly after each restart until I entered safe mode to get the .dmp files. (not very tech-informed beyond the basics, just trying to get my laptop to...
Eight Forums Android App Eight Forums IOS App Follow us on Facebook