TJSidhu
New Member
- Messages
- 2
- Location
- Buckinghamshire
Hi
I have built my own pc last week-(I5 3750k, Cm 212 Plus EVO, Gigabyte GA-Z77X-UD4H, Corsair 8Gb Vengeance LP, Corsair AX 850w, Windows 8 x64)
It has been working fine until the last few days.
I get BSOD dpc watchdog violation on start up. If i restart the system it some time goes to desktop if im lucky. Mostly happens on cold boots.
I Really need help, I cant figure it out... I have checked SSD and updated firmware, have updated drivers. Still same problem.. I have tried to read the dumpfiles with WINDBG. All i can find is:
Unable to load image \SystemRoot\system32\ntoskrnl.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Windows 8 Kernel Version 9200 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 9200.16551.amd64fre.win8_gdr.130306-1502
Machine Name:
Kernel base = 0xfffff800`c4c83000 PsLoadedModuleList = 0xfffff800`c4f4fb00
Debug session time: Fri May 10 18:47:01.078 2013 (UTC + 1:00)
System Uptime: 0 days 8:24:28.125
Probably caused by : ntoskrnl.exe ( nt+5a240 )
I have recovered my drive to when i installed windows 8 x64 and problem still persist. I also have checked all over the internet, If anybody can help me? I would be really grateful.
I have built my own pc last week-(I5 3750k, Cm 212 Plus EVO, Gigabyte GA-Z77X-UD4H, Corsair 8Gb Vengeance LP, Corsair AX 850w, Windows 8 x64)
It has been working fine until the last few days.
I get BSOD dpc watchdog violation on start up. If i restart the system it some time goes to desktop if im lucky. Mostly happens on cold boots.
I Really need help, I cant figure it out... I have checked SSD and updated firmware, have updated drivers. Still same problem.. I have tried to read the dumpfiles with WINDBG. All i can find is:
Unable to load image \SystemRoot\system32\ntoskrnl.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Windows 8 Kernel Version 9200 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 9200.16551.amd64fre.win8_gdr.130306-1502
Machine Name:
Kernel base = 0xfffff800`c4c83000 PsLoadedModuleList = 0xfffff800`c4f4fb00
Debug session time: Fri May 10 18:47:01.078 2013 (UTC + 1:00)
System Uptime: 0 days 8:24:28.125
Probably caused by : ntoskrnl.exe ( nt+5a240 )
I have recovered my drive to when i installed windows 8 x64 and problem still persist. I also have checked all over the internet, If anybody can help me? I would be really grateful.
My Computer
System One
-
- OS
- WINDOWS 8
- Computer type
- PC/Desktop
- CPU
- Intel I5 3750K
- Motherboard
- GIGABYTE GA-Z77X-UD4H
- Memory
- 8GB Corasir Vengence LP (CML8GX3M2A1600C9)
- Graphics Card(s)
- N/A
- Browser
- Firefox
- Antivirus
- Windows Defender