Windows 8 and 8.1 Forums


Driver Power State Failure - Windows 8 x64

  1. #1


    Posts : 41
    Windows 8 Pro with Media Center 64-bit

    Driver Power State Failure - Windows 8 x64


    Hello,

    When I start up my computer I am not always able to enter windows right after I turn on the power button unless I restart it. That is strange and also new. However there are times when I am in fact able to enter Windows briefly with out doing this.

    On the occasions that I am able one of two things afflicts me. Either, my storage hard drive is not booted and does not even appear in my computer which usually requires a reboot or two to rectify - or, My pc takes exceptionally long to load the desktop or some other function of the gui and then shows me the bsod with the error Driver_Power_State_Failure.

    But it gets worse I have second storage hard drive which very often has what one could call hard drive failure in that it randomly dismounts, is not recognised or gives error messages. I have reached my threshold of tolerance and would like to know if you good people at windows 8 forums who have saved me before when you were still windows 7 forums can do so again.

    I have attached my dump files.

    Thanks in advance.

      My System SpecsSystem Spec

  2. #2


    Posts : 5,139
    Win8.1Pro - Finally!!!


    Your BIOS dates from 2008. Please check at the manufacturer's website to see if there are any BIOS updates available for your system. Also check the readme file to see if they apply to the problems that you are having. Please be advised that flashing the BIOS is a very unforgiving process - and one mistake can physically damage your motherboard.

    systeminfo.txt report isn't present. Please be sure that you have ALL available Windows Updates (most systems have between 40 and 50)

    Daemon Tools (and Alcohol % software) are known to cause BSOD's on some Win7 systems (mostly due to the sptd.sys driver, although I have seen dtsoftbus01.sys blamed on several occasions). I strongly suspect that this hold true for Win8 systems also.
    Please un-install the program, then use the following free tool to ensure that the troublesome sptd.sys driver is removed from your system (pick the 32 or 64 bit system depending on your system's configuration): [S] DuplexSecure - FAQ [/S] Link broken as of 21 Jul 2012
    New link (15 Aug 2012): DuplexSecure - Downloads (pick the appropriate version for your system and select "Un-install" when you run it).
    Alternate link: Disc-Tools.com
    Manual procedure here: Registry and SPTD problems | DAEMON Pro Help
    Please update these older drivers. Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver. DO NOT manually delete/rename the driver as it may make the system unbootable! :

    npf.sys Fri Jun 25 12:50:58 2010 (4C24DE72)
    NetGroup Packet Filter Driver, part of the WinPcap packet capture library
    http://www.carrona.org/drivers/driver.php?id=npf.sys

    ew_jubusenum.sys Sun Jan 30 05:19:33 2011 (4D453B35)
    HUAWEI Mobile Connect - Bus Enumerate Device
    http://www.carrona.org/drivers/driver.php?id=ew_jubusenum.sys

    RimSerial_AMD64.sys Wed Jul 6 19:20:01 2011 (4E14EDA1)
    Virtual Serial Port driver for Blackberry
    http://www.carrona.org/drivers/driver.php?id=RimSerial_AMD64.sys

    L1E62x64.sys Thu Sep 22 02:26:32 2011 (4E7AD518)
    Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller (NDIS6.20)
    http://www.carrona.org/drivers/driver.php?id=L1E62x64.sys

    NBVol.sys Mon Nov 21 20:22:00 2011 (4ECAF938)
    Nero Backup Volume Filter Driver
    http://www.carrona.org/drivers/driver.php?id=NBVol.sys

    NBVolUp.sys Mon Nov 21 20:25:20 2011 (4ECAFA00)
    Nero Backup Volume Upper Filter Driver
    http://www.carrona.org/drivers/driver.php?id=NBVolUp.sys

    If all of this doesn't stop the BSOD's, please run these free hardware diagnostics: Hardware Diagnostics. Let us know the results and we can move on from there.




    Analysis:
    The following is for informational purposes only.
    Code:
    **************************Fri Feb  8 09:41:36.361 2013 (UTC - 5:00)**************************
    Loading Dump File [C:\Users\Owner\SysnativeBSODApps\020813-18704-01.dmp]
    Windows 8 Kernel Version 9200 MP (2 procs) Free x64
    Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
    System Uptime:0 days 7:31:41.418
    *** ERROR: Module load completed but symbols could not be loaded for partmgr.sys
    *** WARNING: Unable to verify timestamp for atapi.sys
    *** ERROR: Module load completed but symbols could not be loaded for atapi.sys
    Probably caused by :atapi.sys
    BugCheck 9F, {3, fffffa8005e5c060, fffff8012d4da920, fffffa800626ea30}
    BugCheck Info: DRIVER_POWER_STATE_FAILURE (9f)
    Arguments: 
    Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
    Arg2: fffffa8005e5c060, Physical Device Object of the stack
    Arg3: fffff8012d4da920, nt!TRIAGE_9F_POWER on Win7, otherwise the Functional Device Object of the stack
    Arg4: fffffa800626ea30, The blocked IRP
    BUGCHECK_STR:  0x9F
    DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
    PROCESS_NAME:  System
    FAILURE_BUCKET_ID: 0x9F_3_IMAGE_atapi.sys
    CPUID:        "Intel(R) Core(TM)2 Duo CPU     E7400  @ 2.80GHz"
    MaxSpeed:     2800
    CurrentSpeed: 2800
      BIOS Version                  080015 
      BIOS Release Date             05/14/2008
      Manufacturer                  ECS
      Product Name                  P45T-A
    ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
    **************************Thu Feb  7 01:12:22.154 2013 (UTC - 5:00)**************************
    Loading Dump File [C:\Users\Owner\SysnativeBSODApps\020713-18330-01.dmp]
    Windows 8 Kernel Version 9200 MP (2 procs) Free x64
    Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
    System Uptime:0 days 11:14:36.674
    *** ERROR: Module load completed but symbols could not be loaded for partmgr.sys
    *** WARNING: Unable to verify timestamp for atapi.sys
    *** ERROR: Module load completed but symbols could not be loaded for atapi.sys
    Probably caused by :atapi.sys
    BugCheck 9F, {3, fffffa8005ed2060, fffff802e19fa920, fffffa800a869010}
    BugCheck Info: DRIVER_POWER_STATE_FAILURE (9f)
    Arguments: 
    Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
    Arg2: fffffa8005ed2060, Physical Device Object of the stack
    Arg3: fffff802e19fa920, nt!TRIAGE_9F_POWER on Win7, otherwise the Functional Device Object of the stack
    Arg4: fffffa800a869010, The blocked IRP
    BUGCHECK_STR:  0x9F
    DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
    PROCESS_NAME:  System
    FAILURE_BUCKET_ID: 0x9F_3_IMAGE_atapi.sys
    CPUID:        "Intel(R) Core(TM)2 Duo CPU     E7400  @ 2.80GHz"
    MaxSpeed:     2800
    CurrentSpeed: 2800
      BIOS Version                  080015 
      BIOS Release Date             05/14/2008
      Manufacturer                  ECS
      Product Name                  P45T-A
    ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
    **************************Tue Feb  5 11:56:41.220 2013 (UTC - 5:00)**************************
    Loading Dump File [C:\Users\Owner\SysnativeBSODApps\020513-22027-01.dmp]
    Windows 8 Kernel Version 9200 MP (2 procs) Free x64
    Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
    System Uptime:0 days 2:48:18.897
    *** ERROR: Module load completed but symbols could not be loaded for partmgr.sys
    *** WARNING: Unable to verify timestamp for atapi.sys
    *** ERROR: Module load completed but symbols could not be loaded for atapi.sys
    Probably caused by :atapi.sys
    BugCheck 9F, {3, fffffa8005ec7060, fffff80297b9a920, fffffa800994ad80}
    BugCheck Info: DRIVER_POWER_STATE_FAILURE (9f)
    Arguments: 
    Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
    Arg2: fffffa8005ec7060, Physical Device Object of the stack
    Arg3: fffff80297b9a920, nt!TRIAGE_9F_POWER on Win7, otherwise the Functional Device Object of the stack
    Arg4: fffffa800994ad80, The blocked IRP
    BUGCHECK_STR:  0x9F
    DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
    PROCESS_NAME:  System
    FAILURE_BUCKET_ID: 0x9F_3_IMAGE_atapi.sys
    CPUID:        "Intel(R) Core(TM)2 Duo CPU     E7400  @ 2.80GHz"
    MaxSpeed:     2800
    CurrentSpeed: 2800
      BIOS Version                  080015 
      BIOS Release Date             05/14/2008
      Manufacturer                  ECS
      Product Name                  P45T-A
    ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
    **************************Tue Feb  5 00:57:10.576 2013 (UTC - 5:00)**************************
    Loading Dump File [C:\Users\Owner\SysnativeBSODApps\020513-23228-01.dmp]
    Windows 8 Kernel Version 9200 MP (2 procs) Free x64
    Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
    System Uptime:2 days 12:52:05.787
    *** ERROR: Module load completed but symbols could not be loaded for partmgr.sys
    *** WARNING: Unable to verify timestamp for atapi.sys
    *** ERROR: Module load completed but symbols could not be loaded for atapi.sys
    Probably caused by :atapi.sys
    BugCheck 9F, {3, fffffa8005ec7600, fffff80021af8920, fffffa8009a66190}
    BugCheck Info: DRIVER_POWER_STATE_FAILURE (9f)
    Arguments: 
    Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
    Arg2: fffffa8005ec7600, Physical Device Object of the stack
    Arg3: fffff80021af8920, nt!TRIAGE_9F_POWER on Win7, otherwise the Functional Device Object of the stack
    Arg4: fffffa8009a66190, The blocked IRP
    BUGCHECK_STR:  0x9F
    DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
    PROCESS_NAME:  System
    FAILURE_BUCKET_ID: 0x9F_3_IMAGE_atapi.sys
    CPUID:        "Intel(R) Core(TM)2 Duo CPU     E7400  @ 2.80GHz"
    MaxSpeed:     2800
    CurrentSpeed: 2800
      BIOS Version                  080015 
      BIOS Release Date             05/14/2008
      Manufacturer                  ECS
      Product Name                  P45T-A
    ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
    **************************Mon Jan 28 02:29:18.091 2013 (UTC - 5:00)**************************
    Loading Dump File [C:\Users\Owner\SysnativeBSODApps\012813-17612-01.dmp]
    Windows 8 Kernel Version 9200 MP (2 procs) Free x64
    Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
    System Uptime:2 days 0:23:10.656
    *** ERROR: Module load completed but symbols could not be loaded for partmgr.sys
    *** WARNING: Unable to verify timestamp for atapi.sys
    *** ERROR: Module load completed but symbols could not be loaded for atapi.sys
    Probably caused by :atapi.sys
    BugCheck 9F, {3, fffffa8005eb3060, fffff803a0ad4920, fffffa800ab85a20}
    BugCheck Info: DRIVER_POWER_STATE_FAILURE (9f)
    Arguments: 
    Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
    Arg2: fffffa8005eb3060, Physical Device Object of the stack
    Arg3: fffff803a0ad4920, nt!TRIAGE_9F_POWER on Win7, otherwise the Functional Device Object of the stack
    Arg4: fffffa800ab85a20, The blocked IRP
    BUGCHECK_STR:  0x9F
    DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
    PROCESS_NAME:  System
    FAILURE_BUCKET_ID: 0x9F_3_IMAGE_atapi.sys
    CPUID:        "Intel(R) Core(TM)2 Duo CPU     E7400  @ 2.80GHz"
    MaxSpeed:     2800
    CurrentSpeed: 2800
      BIOS Version                  080015 
      BIOS Release Date             05/14/2008
      Manufacturer                  ECS
      Product Name                  P45T-A
    ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
    
    3rd Party Drivers:
    The following is for information purposes only.
    Any drivers in red should be updated or removed from your system. And should have been discussed in the body of my post.
    Code:
    **************************Fri Feb  8 09:41:36.361 2013 (UTC - 5:00)**************************
    npf.sys                     Fri Jun 25 12:50:58 2010 (4C24DE72)
    ew_jubusenum.sys            Sun Jan 30 05:19:33 2011 (4D453B35)
    RimSerial_AMD64.sys         Wed Jul  6 19:20:01 2011 (4E14EDA1)
    L1E62x64.sys                Thu Sep 22 02:26:32 2011 (4E7AD518)
    NBVol.sys                   Mon Nov 21 20:22:00 2011 (4ECAF938)
    NBVolUp.sys                 Mon Nov 21 20:25:20 2011 (4ECAFA00)
    dtsoftbus01.sys             Fri Jan 13 08:45:46 2012 (4F10358A)
    sptd.sys                    Sat Aug 18 17:05:38 2012 (503003A2)
    aswTdi.SYS                  Tue Aug 21 05:05:01 2012 (50334F3D)
    aswrdr2.sys                 Mon Oct  8 04:23:43 2012 (50728D8F)
    aswFsBlk.SYS                Tue Oct 30 18:43:04 2012 (509057F8)
    aswMonFlt.sys               Tue Oct 30 18:43:09 2012 (509057FD)
    aswKbd.SYS                  Tue Oct 30 18:43:28 2012 (50905810)
    aswSP.SYS                   Tue Oct 30 18:44:06 2012 (50905836)
    aswSnx.SYS                  Tue Oct 30 18:44:08 2012 (50905838)
    aswnet.sys                  Sun Nov  4 05:12:57 2012 (50963FA9)
    intelppm.sys                Mon Nov  5 22:55:02 2012 (50988A16)
    AtihdW86.sys                Wed Dec 12 12:20:30 2012 (50C8BCDE)
    atikmpag.sys                Wed Dec 19 14:32:55 2012 (50D21667)
    atikmdag.sys                Wed Dec 19 15:38:55 2012 (50D225DF)
    ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
    **************************Tue Feb  5 11:56:41.220 2013 (UTC - 5:00)**************************
    aswnet.sys                  Mon Oct 29 11:02:23 2012 (508E9A7F)
    
    http://www.carrona.org/drivers/driver.php?id=npf.sys
    http://www.carrona.org/drivers/driver.php?id=ew_jubusenum.sys
    http://www.carrona.org/drivers/driver.php?id=RimSerial_AMD64.sys
    http://www.carrona.org/drivers/driver.php?id=L1E62x64.sys
    http://www.carrona.org/drivers/driver.php?id=NBVol.sys
    http://www.carrona.org/drivers/driver.php?id=NBVolUp.sys
    http://www.carrona.org/drivers/driver.php?id=dtsoftbus01.sys
    http://www.carrona.org/drivers/driver.php?id=sptd.sys
    http://www.carrona.org/drivers/driver.php?id=aswTdi.SYS
    aswrdr2.sys - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.
    http://www.carrona.org/drivers/driver.php?id=aswFsBlk.SYS
    http://www.carrona.org/drivers/driver.php?id=aswMonFlt.sys
    http://www.carrona.org/drivers/driver.php?id=aswKbd.SYS
    http://www.carrona.org/drivers/driver.php?id=aswSP.SYS
    http://www.carrona.org/drivers/driver.php?id=aswSnx.SYS
    http://www.carrona.org/drivers/driver.php?id=aswnet.sys
    http://www.carrona.org/drivers/driver.php?id=intelppm.sys
    http://www.carrona.org/drivers/driver.php?id=AtihdW86.sys
    http://www.carrona.org/drivers/driver.php?id=atikmpag.sys
    http://www.carrona.org/drivers/driver.php?id=atikmdag.sys
    http://www.carrona.org/drivers/driver.php?id=aswnet.sys
      My System SpecsSystem Spec

Driver Power State Failure - Windows 8 x64
Related Threads
Hello, I am getting periodic BSOD issues that MIGHT be occurring when the system is transferring from the Intel(r) HD 4000 GPU to the GTX 880M Nvida card. The Nvidia card is brand new. I've been trying to test it via GPU-Z and FurMark. I ran it for an hour and it never crashed, but was running...
Hey, I got some BSOD problems. Do you got time & experience to help me? :) I got Windows 8 at the moment, I will install 8.1 shortly. Had 8.1 before i re-installed OS when the first BSOD showed up, so I doubt that 8.1 will fix things completely. My problems ATM! - Driver Power State...
Hi guys, my name is Filippo. I am experiencing a severe problem with my laptop, a pretty new ASUS S550CB. It started two weeks ago and I really cannot figure out what is the cause. The problem is that the laptop is no longer unable to wake up from sleep or hybernation modes. If it goes to...
Hi I need your help. Everytime I wake up my Lenovo U310 Touch from Sleep it freezes and then blue screen error : DRIVER_POWER_STATE_FAILURE. Could you please help me ? I have attached my files from SF diagnostic tool. Thank you.
Driver power state failure - Windows 8 64-bit in BSOD Crashes and Debugging
Hello, when I start up my PC I always get a driver power state failure I've been ignoring it for a few days but I want to get rid of it now. I have attached my files from SF diagnostic tool. Thanks a lot :) SF_31-07-2013.zip
Hello, I was just watching YouTube videos when I got a driver power state failure BSOD, my computer is set to never sleep (because I sometimes render videos over night) I have attached my files from SF diagnostic tool. Thanks a lot -Jack
Windows 8 Driver State Power Failure in BSOD Crashes and Debugging
Yes, another one of these threads. I am sure you are flooded with them, but this has been irritating me for 3 months and would like it to get resolved if someone could help. I think I big issue is that my motherboard does not have any Windows 8 drivers (big mistake on my part upgrading), but there...
Eight Forums Android App Eight Forums IOS App Follow us on Facebook