Windows 8 and 8.1 Forums


Random BSOD on Windows 8 boot

  1. #1


    Posts : 1
    Microsoft Windows 8 Pro 64-bit

    Random BSOD on Windows 8 boot


    Hello,

    I am running Windows 8 installed on a corsair SSD but I also have a PCIe RAID controler (Raidcore RC5252-08).
    My BSOD only happens when Windows is starting after the pc was powered off.
    After a BSOD, the system restart itself and windows boot normally.
    I suspect the Raid controler driver to be the issue as the driver was last written for vista x64 but I used to run it on Windows 7 x64 without any issues. I can't update the Raidcore driver as the company ciprico was bought by Dot Hill and the drivers were not updated.
    All others drivers are up to date. Any suggestion welcome.
    Cheers

      My System SpecsSystem Spec

  2. #2


    Posts : 5,139
    Win8.1Pro - Finally!!!


    Storage controller drivers are at best cranky when dealing with SSD's.
    Add in a driver from before SSD's were around - and it's a recipe for trouble.

    FWIW - I had a Promise RAID card back when Win7 first came out - and went through troubles getting it updated.
    I finally gave up on RAID, and quite frankly I haven't noticed any difference (I use the 10,000 rpm Raptors).

    So, my suggestion is to either:
    1) abandon RAID and use the controller built into the mobo, or
    2) purchase a new, Win8 compatible RAID card.

    That being said, here's my analysis of the reports that you submitted......
    It may be that we'll uncover some things that'll make the RAID card drivers less of a problem for you (so try them first - before investing in a new RAID card or abandoning RAID).

    You have a Belkin Wireless G USB Network Adapter,
    I do not recommend using wireless USB network devices. Especially in Win7/Win8 systems.
    These wireless USB devices have many issues with Win7(and I suspect with Win8) - using Vista drivers with them is almost sure to cause a BSOD.
    Should you want to keep using these devices, be sure to have Win7/Win8 drivers - DO NOT use Vista drivers!!!
    An installable wireless PCI/PCIe card that's plugged into your motherboard is much more robust, reliable, and powerful.
    We've seen a number of BSOD issues with SSD's. Here's the information that I've compiled so far:
    There's not a whole bunch available to test SSD's. The "easiest" test is to remove the SSD, install a platter-based hard drive, install Windows and test for stability that way.

    You also seem to have an SSD that isn't part of the RAID array, so try the following:
    Here's some suggestions:
    - Update the SSD's firmware to the latest available version (VERY IMPORTANT!!!)
    - Update the motherboard controllers drivers to the latest available version from the controller manufacturer (NOT the mobo manufacturer unless you can't find any on the controller manufacturer's website)
    - Slow the memory (RAM) down to the next slower speed (I've only seen one person who claimed that this worked for them).
    - Use any manufacturer's utilities that you may have. If you don't have any, then try this free one (I haven't used it myself): Crystal Dew World
    - Update chipset and storage controller drivers to the latest available from the manufacturer of the device (not the manufacturer of the motherboard). Be sure to update ALL controllers on the motherboard!
    ....NOTE: Recently (Nov 2011) we had BSOD issues with the Marvell 91xx controller and an SSD. You may have to switch controllers also.
    - Replace the SSD with a platter based hard drive and see if that stops the BSOD's. If it does, then it's likely that there's a problem with the SSD OR an incompatibility with your system.
    It's my opinion that SSD's aren't reliable enough (with current hardware) to be used on a system that needs to work reliably. Until I see reliability I will not recommend, nor will I use, SSD's for critical applications.
    06 Dec 2011 - This post tends to confirm issues with certain SSD chipsets and certain controllers - [SOLVED] cant find the cause of BSOD F4 - Tech Support Forum
    29 May 2012 - The frequency of BSOD's with SSD's seems to have been decreasing over the last several months. It may be approaching time to re-evaluate my stand on their suitability for use in production systems.
    10 Nov 2012 - I'm seeing an upswing in SSD errors - but most appear due to older storage controller drivers. I strongly suggest NOT using storage controller drivers that don't date from 2012 (if none are available, don't connect an SSD to that controller)
    05 Jan 2013 - very interesting post about difficulties with the Marvell controllers even when not connected to the SSD drives: https://www.eightforums.com/bsod-cra...tml#post169956
    Daemon Tools (and Alcohol % software) are known to cause BSOD's on some Win7 systems (mostly due to the sptd.sys driver, although I have seen dtsoftbus01.sys blamed on several occasions). I strongly suspect that this hold true for Win8 systems also.
    Please un-install the program, then use the following free tool to ensure that the troublesome sptd.sys driver is removed from your system (pick the 32 or 64 bit system depending on your system's configuration): [S] DuplexSecure - FAQ [/S] Link broken as of 21 Jul 2012
    New link (15 Aug 2012): DuplexSecure - Downloads (pick the appropriate version for your system and select "Un-install" when you run it).
    Alternate link: Disc-Tools.com
    Manual procedure here: Registry and SPTD problems | DAEMON Pro Help
    Just to let you know, the BSOD's all blame the RAID drivers, so it may be necessary to replace the RAID card or abandon using RAID.

    Please update these older drivers. Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver. DO NOT manually delete/rename the driver as it may make the system unbootable! :

    RAID Driver:
    bcraid.sys Fri Mar 21 17:55:25 2008 (47E42ECD)
    Fulcrum RAIDCore MiniPort driver by Broadcom
    bcraid.sys - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.

    RAID Driver:
    bccfg.sys Tue Jun 17 18:12:15 2008 (485836BF)
    Fulcrum RAIDCore Configuration driver by Broadcom
    bccfg.sys - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.

    Update this one:
    rtl8187B.sys Thu Nov 5 00:51:31 2009 (4AF267E3)
    Realtek RTL8187B Wireless 802.11b/g 54Mbps USB 2.0 Network Adapter
    http://www.carrona.org/drivers/driver.php?id=rtl8187B.sys

    Update this one. If you can't find an update, remove the program it belongs to.
    Don't waste a lot of time on it as it hasn't been involved in a BSOD in a while.
    InputFilter_FlexDef2b.sys Fri Jun 18 20:36:01 2010 (4C1C10F1)
    Dongguan Siliten Electronic Co. - Flex Define HID Keyboard Driver
    http://www.carrona.org/drivers/driver.php?id=InputFilter_FlexDef2b.sys

    Good luck! Post back if the BSOD's continue after all of the above stuff.

    Analysis:
    The following is for informational purposes only.
    Code:
    **************************Sat Feb  2 03:44:43.968 2013 (UTC - 5:00)**************************
    Loading Dump File [C:\Users\Owner\SysnativeBSODApps\020213-34781-01.dmp]
    Windows 8 Kernel Version 9200 MP (4 procs) Free x64
    Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
    System Uptime:0 days 10:41:46.315
    *** WARNING: Unable to verify timestamp for bcraid.sys
    *** ERROR: Module load completed but symbols could not be loaded for bcraid.sys
    Probably caused by :bcraid.sys ( bcraid+1d35f )
    BugCheck 133, {0, 281, 280, 0}
    BugCheck Info: DPC_WATCHDOG_VIOLATION (133)
    Arguments: 
    Arg1: 0000000000000000, A single DPC or ISR exceeded its time allotment. The offending
        component can usually be identified with a stack trace.
    Arg2: 0000000000000281, The DPC time count (in ticks).
    Arg3: 0000000000000280, The DPC time allotment (in ticks).
    Arg4: 0000000000000000
    BUGCHECK_STR:  0x133
    DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
    PROCESS_NAME:  System
    FAILURE_BUCKET_ID: 0x133_DPC_bcraid+1d35f
    CPUID:        "Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz"
    MaxSpeed:     3400
    CurrentSpeed: 3410
      BIOS Version                  1408
      BIOS Release Date             11/09/2012
      Manufacturer                  System manufacturer
      Product Name                  System Product Name
    ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
    **************************Fri Feb  1 13:05:51.970 2013 (UTC - 5:00)**************************
    Loading Dump File [C:\Users\Owner\SysnativeBSODApps\020113-33421-01.dmp]
    Windows 8 Kernel Version 9200 MP (4 procs) Free x64
    Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
    System Uptime:5 days 23:58:20.295
    *** WARNING: Unable to verify timestamp for bcraid.sys
    *** ERROR: Module load completed but symbols could not be loaded for bcraid.sys
    Probably caused by :bcraid.sys ( bcraid+1d35f )
    BugCheck 133, {0, 281, 280, 0}
    BugCheck Info: DPC_WATCHDOG_VIOLATION (133)
    Arguments: 
    Arg1: 0000000000000000, A single DPC or ISR exceeded its time allotment. The offending
        component can usually be identified with a stack trace.
    Arg2: 0000000000000281, The DPC time count (in ticks).
    Arg3: 0000000000000280, The DPC time allotment (in ticks).
    Arg4: 0000000000000000
    BUGCHECK_STR:  0x133
    DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
    PROCESS_NAME:  System
    FAILURE_BUCKET_ID: 0x133_DPC_bcraid+1d35f
    CPUID:        "Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz"
    MaxSpeed:     3400
    CurrentSpeed: 3410
      BIOS Version                  1408
      BIOS Release Date             11/09/2012
      Manufacturer                  System manufacturer
      Product Name                  System Product Name
    ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
    **************************Mon Jan 21 12:51:02.969 2013 (UTC - 5:00)**************************
    Loading Dump File [C:\Users\Owner\SysnativeBSODApps\012113-33171-01.dmp]
    Windows 8 Kernel Version 9200 MP (4 procs) Free x64
    Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
    System Uptime:1 days 9:21:17.672
    *** WARNING: Unable to verify timestamp for bcraid.sys
    *** ERROR: Module load completed but symbols could not be loaded for bcraid.sys
    Probably caused by :bcraid.sys ( bcraid+1d35f )
    BugCheck 133, {0, 281, 280, 0}
    BugCheck Info: DPC_WATCHDOG_VIOLATION (133)
    Arguments: 
    Arg1: 0000000000000000, A single DPC or ISR exceeded its time allotment. The offending
        component can usually be identified with a stack trace.
    Arg2: 0000000000000281, The DPC time count (in ticks).
    Arg3: 0000000000000280, The DPC time allotment (in ticks).
    Arg4: 0000000000000000
    BUGCHECK_STR:  0x133
    DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
    PROCESS_NAME:  System
    FAILURE_BUCKET_ID: 0x133_DPC_bcraid+1d35f
    CPUID:        "Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz"
    MaxSpeed:     3400
    CurrentSpeed: 3410
      BIOS Version                  1408
      BIOS Release Date             11/09/2012
      Manufacturer                  System manufacturer
      Product Name                  System Product Name
    ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
    **************************Sat Jan 19 11:29:47.961 2013 (UTC - 5:00)**************************
    Loading Dump File [C:\Users\Owner\SysnativeBSODApps\011913-30562-01.dmp]
    Windows 8 Kernel Version 9200 MP (4 procs) Free x64
    Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
    System Uptime:0 days 2:18:54.879
    *** WARNING: Unable to verify timestamp for bcraid.sys
    *** ERROR: Module load completed but symbols could not be loaded for bcraid.sys
    Probably caused by :bcraid.sys ( bcraid+1d35f )
    BugCheck 133, {0, 281, 280, 0}
    BugCheck Info: DPC_WATCHDOG_VIOLATION (133)
    Arguments: 
    Arg1: 0000000000000000, A single DPC or ISR exceeded its time allotment. The offending
        component can usually be identified with a stack trace.
    Arg2: 0000000000000281, The DPC time count (in ticks).
    Arg3: 0000000000000280, The DPC time allotment (in ticks).
    Arg4: 0000000000000000
    BUGCHECK_STR:  0x133
    DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
    PROCESS_NAME:  System
    FAILURE_BUCKET_ID: 0x133_DPC_bcraid+1d35f
    CPUID:        "Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz"
    MaxSpeed:     3400
    CurrentSpeed: 3410
      BIOS Version                  1408
      BIOS Release Date             11/09/2012
      Manufacturer                  System manufacturer
      Product Name                  System Product Name
    ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
    **************************Sat Jan 19 04:23:02.962 2013 (UTC - 5:00)**************************
    Loading Dump File [C:\Users\Owner\SysnativeBSODApps\011913-31093-01.dmp]
    Windows 8 Kernel Version 9200 MP (4 procs) Free x64
    Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
    System Uptime:3 days 0:35:24.883
    *** WARNING: Unable to verify timestamp for bcraid.sys
    *** ERROR: Module load completed but symbols could not be loaded for bcraid.sys
    Probably caused by :bcraid.sys ( bcraid+1d35f )
    BugCheck 133, {0, 281, 280, 0}
    BugCheck Info: DPC_WATCHDOG_VIOLATION (133)
    Arguments: 
    Arg1: 0000000000000000, A single DPC or ISR exceeded its time allotment. The offending
        component can usually be identified with a stack trace.
    Arg2: 0000000000000281, The DPC time count (in ticks).
    Arg3: 0000000000000280, The DPC time allotment (in ticks).
    Arg4: 0000000000000000
    BUGCHECK_STR:  0x133
    DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
    PROCESS_NAME:  System
    FAILURE_BUCKET_ID: 0x133_DPC_bcraid+1d35f
    CPUID:        "Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz"
    MaxSpeed:     3400
    CurrentSpeed: 3410
      BIOS Version                  1408
      BIOS Release Date             11/09/2012
      Manufacturer                  System manufacturer
      Product Name                  System Product Name
    ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
    **************************Thu Jan 10 15:54:53.970 2013 (UTC - 5:00)**************************
    Loading Dump File [C:\Users\Owner\SysnativeBSODApps\011013-31156-01.dmp]
    Windows 8 Kernel Version 9200 MP (4 procs) Free x64
    Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
    System Uptime:1 days 5:58:26.619
    *** WARNING: Unable to verify timestamp for bcraid.sys
    *** ERROR: Module load completed but symbols could not be loaded for bcraid.sys
    Probably caused by :bcraid.sys ( bcraid+1d35f )
    BugCheck 133, {0, 281, 280, 0}
    BugCheck Info: DPC_WATCHDOG_VIOLATION (133)
    Arguments: 
    Arg1: 0000000000000000, A single DPC or ISR exceeded its time allotment. The offending
        component can usually be identified with a stack trace.
    Arg2: 0000000000000281, The DPC time count (in ticks).
    Arg3: 0000000000000280, The DPC time allotment (in ticks).
    Arg4: 0000000000000000
    BUGCHECK_STR:  0x133
    DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
    PROCESS_NAME:  System
    FAILURE_BUCKET_ID: 0x133_DPC_bcraid+1d35f
    CPUID:        "Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz"
    MaxSpeed:     3400
    CurrentSpeed: 3410
      BIOS Version                  1408
      BIOS Release Date             11/09/2012
      Manufacturer                  System manufacturer
      Product Name                  System Product Name
    ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
    **************************Wed Jan  9 09:20:00.962 2013 (UTC - 5:00)**************************
    Loading Dump File [C:\Users\Owner\SysnativeBSODApps\010913-30468-01.dmp]
    Windows 8 Kernel Version 9200 MP (4 procs) Free x64
    Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
    System Uptime:2 days 19:42:43.494
    *** WARNING: Unable to verify timestamp for bcraid.sys
    *** ERROR: Module load completed but symbols could not be loaded for bcraid.sys
    Probably caused by :bcraid.sys ( bcraid+1d35f )
    BugCheck 133, {0, 281, 280, 0}
    BugCheck Info: DPC_WATCHDOG_VIOLATION (133)
    Arguments: 
    Arg1: 0000000000000000, A single DPC or ISR exceeded its time allotment. The offending
        component can usually be identified with a stack trace.
    Arg2: 0000000000000281, The DPC time count (in ticks).
    Arg3: 0000000000000280, The DPC time allotment (in ticks).
    Arg4: 0000000000000000
    BUGCHECK_STR:  0x133
    DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
    PROCESS_NAME:  System
    FAILURE_BUCKET_ID: 0x133_DPC_bcraid+1d35f
    CPUID:        "Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz"
    MaxSpeed:     3400
    CurrentSpeed: 3410
      BIOS Version                  1408
      BIOS Release Date             11/09/2012
      Manufacturer                  System manufacturer
      Product Name                  System Product Name
    ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
    **************************Sat Jan  5 10:09:20.961 2013 (UTC - 5:00)**************************
    Loading Dump File [C:\Users\Owner\SysnativeBSODApps\010513-33234-01.dmp]
    Windows 8 Kernel Version 9200 MP (4 procs) Free x64
    Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
    System Uptime:0 days 22:02:38.004
    *** WARNING: Unable to verify timestamp for bcraid.sys
    *** ERROR: Module load completed but symbols could not be loaded for bcraid.sys
    Probably caused by :bcraid.sys ( bcraid+1d35f )
    BugCheck 133, {0, 281, 280, 0}
    BugCheck Info: DPC_WATCHDOG_VIOLATION (133)
    Arguments: 
    Arg1: 0000000000000000, A single DPC or ISR exceeded its time allotment. The offending
        component can usually be identified with a stack trace.
    Arg2: 0000000000000281, The DPC time count (in ticks).
    Arg3: 0000000000000280, The DPC time allotment (in ticks).
    Arg4: 0000000000000000
    BUGCHECK_STR:  0x133
    DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
    PROCESS_NAME:  System
    FAILURE_BUCKET_ID: 0x133_DPC_bcraid+1d35f
    CPUID:        "Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz"
    MaxSpeed:     3400
    CurrentSpeed: 3410
      BIOS Version                  1408
      BIOS Release Date             11/09/2012
      Manufacturer                  System manufacturer
      Product Name                  System Product Name
    ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
    **************************Thu Jan  3 15:43:46.968 2013 (UTC - 5:00)**************************
    Loading Dump File [C:\Users\Owner\SysnativeBSODApps\010313-29562-01.dmp]
    Windows 8 Kernel Version 9200 MP (4 procs) Free x64
    Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
    System Uptime:11 days 12:09:14.894
    *** WARNING: Unable to verify timestamp for bcraid.sys
    *** ERROR: Module load completed but symbols could not be loaded for bcraid.sys
    Probably caused by :bcraid.sys ( bcraid+1d35f )
    BugCheck 133, {0, 281, 280, 0}
    BugCheck Info: DPC_WATCHDOG_VIOLATION (133)
    Arguments: 
    Arg1: 0000000000000000, A single DPC or ISR exceeded its time allotment. The offending
        component can usually be identified with a stack trace.
    Arg2: 0000000000000281, The DPC time count (in ticks).
    Arg3: 0000000000000280, The DPC time allotment (in ticks).
    Arg4: 0000000000000000
    BUGCHECK_STR:  0x133
    DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
    PROCESS_NAME:  System
    FAILURE_BUCKET_ID: 0x133_DPC_bcraid+1d35f
    CPUID:        "Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz"
    MaxSpeed:     3400
    CurrentSpeed: 3410
      BIOS Version                  1408
      BIOS Release Date             11/09/2012
      Manufacturer                  System manufacturer
      Product Name                  System Product Name
    ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
    **************************Sat Dec 22 06:36:23.960 2012 (UTC - 5:00)**************************
    Loading Dump File [C:\Users\Owner\SysnativeBSODApps\122212-32250-01.dmp]
    Windows 8 Kernel Version 9200 MP (4 procs) Free x64
    Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
    System Uptime:0 days 0:11:59.902
    *** WARNING: Unable to verify timestamp for bcraid.sys
    *** ERROR: Module load completed but symbols could not be loaded for bcraid.sys
    Probably caused by :bcraid.sys ( bcraid+1d35f )
    BugCheck 133, {0, 281, 280, 0}
    BugCheck Info: DPC_WATCHDOG_VIOLATION (133)
    Arguments: 
    Arg1: 0000000000000000, A single DPC or ISR exceeded its time allotment. The offending
        component can usually be identified with a stack trace.
    Arg2: 0000000000000281, The DPC time count (in ticks).
    Arg3: 0000000000000280, The DPC time allotment (in ticks).
    Arg4: 0000000000000000
    BUGCHECK_STR:  0x133
    DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
    PROCESS_NAME:  System
    FAILURE_BUCKET_ID: 0x133_DPC_bcraid+1d35f
    CPUID:        "Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz"
    MaxSpeed:     3400
    CurrentSpeed: 3410
      BIOS Version                  1408
      BIOS Release Date             11/09/2012
      Manufacturer                  System manufacturer
      Product Name                  System Product Name
    ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
    **************************Sat Dec 22 06:10:20.958 2012 (UTC - 5:00)**************************
    Loading Dump File [C:\Users\Owner\SysnativeBSODApps\122212-32140-01.dmp]
    Windows 8 Kernel Version 9200 MP (4 procs) Free x64
    Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
    System Uptime:0 days 0:05:41.120
    *** WARNING: Unable to verify timestamp for bcraid.sys
    *** ERROR: Module load completed but symbols could not be loaded for bcraid.sys
    Probably caused by :bcraid.sys ( bcraid+1d35f )
    BugCheck 133, {0, 281, 280, 0}
    BugCheck Info: DPC_WATCHDOG_VIOLATION (133)
    Arguments: 
    Arg1: 0000000000000000, A single DPC or ISR exceeded its time allotment. The offending
        component can usually be identified with a stack trace.
    Arg2: 0000000000000281, The DPC time count (in ticks).
    Arg3: 0000000000000280, The DPC time allotment (in ticks).
    Arg4: 0000000000000000
    BUGCHECK_STR:  0x133
    DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
    PROCESS_NAME:  System
    FAILURE_BUCKET_ID: 0x133_DPC_bcraid+1d35f
    CPUID:        "Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz"
    MaxSpeed:     3400
    CurrentSpeed: 3410
      BIOS Version                  1408
      BIOS Release Date             11/09/2012
      Manufacturer                  System manufacturer
      Product Name                  System Product Name
    ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
    **************************Sat Dec 22 05:55:34.968 2012 (UTC - 5:00)**************************
    Loading Dump File [C:\Users\Owner\SysnativeBSODApps\122212-31031-01.dmp]
    Windows 8 Kernel Version 9200 MP (4 procs) Free x64
    Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
    System Uptime:0 days 14:08:31.556
    *** WARNING: Unable to verify timestamp for bcraid.sys
    *** ERROR: Module load completed but symbols could not be loaded for bcraid.sys
    Probably caused by :bcraid.sys ( bcraid+1d35f )
    BugCheck 133, {0, 281, 280, 0}
    BugCheck Info: DPC_WATCHDOG_VIOLATION (133)
    Arguments: 
    Arg1: 0000000000000000, A single DPC or ISR exceeded its time allotment. The offending
        component can usually be identified with a stack trace.
    Arg2: 0000000000000281, The DPC time count (in ticks).
    Arg3: 0000000000000280, The DPC time allotment (in ticks).
    Arg4: 0000000000000000
    BUGCHECK_STR:  0x133
    DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
    PROCESS_NAME:  System
    FAILURE_BUCKET_ID: 0x133_DPC_bcraid+1d35f
    CPUID:        "Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz"
    MaxSpeed:     3400
    CurrentSpeed: 3410
      BIOS Version                  1408
      BIOS Release Date             11/09/2012
      Manufacturer                  System manufacturer
      Product Name                  System Product Name
    ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
    **************************Fri Dec 21 15:46:38.966 2012 (UTC - 5:00)**************************
    Loading Dump File [C:\Users\Owner\SysnativeBSODApps\122112-33921-01.dmp]
    Windows 8 Kernel Version 9200 MP (4 procs) Free x64
    Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
    System Uptime:0 days 4:59:01.643
    *** WARNING: Unable to verify timestamp for bcraid.sys
    *** ERROR: Module load completed but symbols could not be loaded for bcraid.sys
    Probably caused by :bcraid.sys ( bcraid+1d35f )
    BugCheck 133, {0, 281, 280, 0}
    BugCheck Info: DPC_WATCHDOG_VIOLATION (133)
    Arguments: 
    Arg1: 0000000000000000, A single DPC or ISR exceeded its time allotment. The offending
        component can usually be identified with a stack trace.
    Arg2: 0000000000000281, The DPC time count (in ticks).
    Arg3: 0000000000000280, The DPC time allotment (in ticks).
    Arg4: 0000000000000000
    BUGCHECK_STR:  0x133
    DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
    PROCESS_NAME:  System
    FAILURE_BUCKET_ID: 0x133_DPC_bcraid+1d35f
    CPUID:        "Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz"
    MaxSpeed:     3400
    CurrentSpeed: 3410
      BIOS Version                  1408
      BIOS Release Date             11/09/2012
      Manufacturer                  System manufacturer
      Product Name                  System Product Name
    ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
    **************************Fri Dec 21 08:04:42.974 2012 (UTC - 5:00)**************************
    Loading Dump File [C:\Users\Owner\SysnativeBSODApps\122112-31921-01.dmp]
    Windows 8 Kernel Version 9200 MP (4 procs) Free x64
    Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
    System Uptime:0 days 15:49:57.461
    *** WARNING: Unable to verify timestamp for bcraid.sys
    *** ERROR: Module load completed but symbols could not be loaded for bcraid.sys
    Probably caused by :bcraid.sys ( bcraid+1d35f )
    BugCheck 133, {0, 281, 280, 0}
    BugCheck Info: DPC_WATCHDOG_VIOLATION (133)
    Arguments: 
    Arg1: 0000000000000000, A single DPC or ISR exceeded its time allotment. The offending
        component can usually be identified with a stack trace.
    Arg2: 0000000000000281, The DPC time count (in ticks).
    Arg3: 0000000000000280, The DPC time allotment (in ticks).
    Arg4: 0000000000000000
    BUGCHECK_STR:  0x133
    DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
    PROCESS_NAME:  System
    FAILURE_BUCKET_ID: 0x133_DPC_bcraid+1d35f
    CPUID:        "Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz"
    MaxSpeed:     3400
    CurrentSpeed: 3410
      BIOS Version                  1408
      BIOS Release Date             11/09/2012
      Manufacturer                  System manufacturer
      Product Name                  System Product Name
    ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
    **************************Thu Dec 20 13:05:10.985 2012 (UTC - 5:00)**************************
    Loading Dump File [C:\Users\Owner\SysnativeBSODApps\122012-30390-01.dmp]
    Windows 8 Kernel Version 9200 MP (4 procs) Free x64
    Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
    System Uptime:0 days 11:35:46.279
    *** WARNING: Unable to verify timestamp for bcraid.sys
    *** ERROR: Module load completed but symbols could not be loaded for bcraid.sys
    Probably caused by :bcraid.sys ( bcraid+1d35f )
    BugCheck 133, {0, 281, 280, 0}
    BugCheck Info: DPC_WATCHDOG_VIOLATION (133)
    Arguments: 
    Arg1: 0000000000000000, A single DPC or ISR exceeded its time allotment. The offending
        component can usually be identified with a stack trace.
    Arg2: 0000000000000281, The DPC time count (in ticks).
    Arg3: 0000000000000280, The DPC time allotment (in ticks).
    Arg4: 0000000000000000
    BUGCHECK_STR:  0x133
    DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
    PROCESS_NAME:  System
    FAILURE_BUCKET_ID: 0x133_DPC_bcraid+1d35f
    CPUID:        "Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz"
    MaxSpeed:     3400
    CurrentSpeed: 3410
      BIOS Version                  1408
      BIOS Release Date             11/09/2012
      Manufacturer                  System manufacturer
      Product Name                  System Product Name
    ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
    **************************Wed Dec 19 17:59:27.955 2012 (UTC - 5:00)**************************
    Loading Dump File [C:\Users\Owner\SysnativeBSODApps\122012-31984-01.dmp]
    Windows 8 Kernel Version 9200 MP (4 procs) Free x64
    Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
    System Uptime:0 days 0:03:40.127
    *** WARNING: Unable to verify timestamp for bcraid.sys
    *** ERROR: Module load completed but symbols could not be loaded for bcraid.sys
    Probably caused by :bcraid.sys ( bcraid+1d35f )
    BugCheck 133, {0, 281, 280, 0}
    BugCheck Info: DPC_WATCHDOG_VIOLATION (133)
    Arguments: 
    Arg1: 0000000000000000, A single DPC or ISR exceeded its time allotment. The offending
        component can usually be identified with a stack trace.
    Arg2: 0000000000000281, The DPC time count (in ticks).
    Arg3: 0000000000000280, The DPC time allotment (in ticks).
    Arg4: 0000000000000000
    BUGCHECK_STR:  0x133
    DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
    PROCESS_NAME:  System
    FAILURE_BUCKET_ID: 0x133_DPC_bcraid+1d35f
    CPUID:        "Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz"
    MaxSpeed:     3400
    CurrentSpeed: 3410
      BIOS Version                  1408
      BIOS Release Date             11/09/2012
      Manufacturer                  System manufacturer
      Product Name                  System Product Name
    ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
    **************************Wed Dec 19 17:50:56.964 2012 (UTC - 5:00)**************************
    Loading Dump File [C:\Users\Owner\SysnativeBSODApps\121912-33750-01.dmp]
    Windows 8 Kernel Version 9200 MP (4 procs) Free x64
    Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
    System Uptime:1 days 1:28:31.692
    *** WARNING: Unable to verify timestamp for bcraid.sys
    *** ERROR: Module load completed but symbols could not be loaded for bcraid.sys
    Probably caused by :bcraid.sys ( bcraid+1d35f )
    BugCheck 133, {0, 281, 280, 0}
    BugCheck Info: DPC_WATCHDOG_VIOLATION (133)
    Arguments: 
    Arg1: 0000000000000000, A single DPC or ISR exceeded its time allotment. The offending
        component can usually be identified with a stack trace.
    Arg2: 0000000000000281, The DPC time count (in ticks).
    Arg3: 0000000000000280, The DPC time allotment (in ticks).
    Arg4: 0000000000000000
    BUGCHECK_STR:  0x133
    DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
    PROCESS_NAME:  System
    FAILURE_BUCKET_ID: 0x133_DPC_bcraid+1d35f
    CPUID:        "Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz"
    MaxSpeed:     3400
    CurrentSpeed: 3410
      BIOS Version                  1408
      BIOS Release Date             11/09/2012
      Manufacturer                  System manufacturer
      Product Name                  System Product Name
    ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
    **************************Tue Dec 18 16:22:00.962 2012 (UTC - 5:00)**************************
    Loading Dump File [C:\Users\Owner\SysnativeBSODApps\121812-31437-01.dmp]
    Windows 8 Kernel Version 9200 MP (4 procs) Free x64
    Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
    System Uptime:2 days 23:59:48.561
    *** WARNING: Unable to verify timestamp for bcraid.sys
    *** ERROR: Module load completed but symbols could not be loaded for bcraid.sys
    Probably caused by :bcraid.sys ( bcraid+1d35f )
    BugCheck 133, {0, 281, 280, 0}
    BugCheck Info: DPC_WATCHDOG_VIOLATION (133)
    Arguments: 
    Arg1: 0000000000000000, A single DPC or ISR exceeded its time allotment. The offending
        component can usually be identified with a stack trace.
    Arg2: 0000000000000281, The DPC time count (in ticks).
    Arg3: 0000000000000280, The DPC time allotment (in ticks).
    Arg4: 0000000000000000
    BUGCHECK_STR:  0x133
    DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
    PROCESS_NAME:  System
    FAILURE_BUCKET_ID: 0x133_DPC_bcraid+1d35f
    CPUID:        "Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz"
    MaxSpeed:     3400
    CurrentSpeed: 3410
      BIOS Version                  1408
      BIOS Release Date             11/09/2012
      Manufacturer                  System manufacturer
      Product Name                  System Product Name
    ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
    **************************Thu Nov 29 14:24:01.887 2012 (UTC - 5:00)**************************
    Loading Dump File [C:\Users\Owner\SysnativeBSODApps\112912-27843-01.dmp]
    Windows 8 Kernel Version 9200 MP (4 procs) Free x64
    Built by: 9200.16442.amd64fre.win8_gdr.121023-1503
    System Uptime:0 days 1:11:14.548
    *** WARNING: Unable to verify timestamp for bcraid.sys
    *** ERROR: Module load completed but symbols could not be loaded for bcraid.sys
    Probably caused by :bcraid.sys ( bcraid+1d35f )
    BugCheck 133, {0, 281, 280, 0}
    BugCheck Info: DPC_WATCHDOG_VIOLATION (133)
    Arguments: 
    Arg1: 0000000000000000, A single DPC or ISR exceeded its time allotment. The offending
        component can usually be identified with a stack trace.
    Arg2: 0000000000000281, The DPC time count (in ticks).
    Arg3: 0000000000000280, The DPC time allotment (in ticks).
    Arg4: 0000000000000000
    BUGCHECK_STR:  0x133
    DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
    PROCESS_NAME:  System
    FAILURE_BUCKET_ID: 0x133_DPC_bcraid+1d35f
    CPUID:        "Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz"
    MaxSpeed:     3400
    CurrentSpeed: 3410
      BIOS Version                  1408
      BIOS Release Date             11/09/2012
      Manufacturer                  System manufacturer
      Product Name                  System Product Name
    ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
    **************************Sun Nov 25 14:01:15.661 2012 (UTC - 5:00)**************************
    Loading Dump File [C:\Users\Owner\SysnativeBSODApps\112512-12640-01.dmp]
    Windows 8 Kernel Version 9200 MP (4 procs) Free x64
    Built by: 9200.16442.amd64fre.win8_gdr.121023-1503
    System Uptime:0 days 0:03:06.328
    *** WARNING: Unable to verify timestamp for bcraid.sys
    *** ERROR: Module load completed but symbols could not be loaded for bcraid.sys
    Probably caused by :bcraid.sys ( bcraid+e13f )
    BugCheck D1, {4, 7, 0, fffff8800ec9813f}
    BugCheck Info: DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
    Arguments: 
    Arg1: 0000000000000004, memory referenced
    Arg2: 0000000000000007, IRQL
    Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
    Arg4: fffff8800ec9813f, address which referenced memory
    BUGCHECK_STR:  AV
    DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
    PROCESS_NAME:  System
    FAILURE_BUCKET_ID: AV_bcraid+e13f
    CPUID:        "Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz"
    MaxSpeed:     3400
    CurrentSpeed: 3410
      BIOS Version                  0262
      BIOS Release Date             02/14/2012
      Manufacturer                  System manufacturer
      Product Name                  System Product Name
    ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
    **************************Sun Nov 25 13:56:11.640 2012 (UTC - 5:00)**************************
    Loading Dump File [C:\Users\Owner\SysnativeBSODApps\112512-12312-01.dmp]
    Windows 8 Kernel Version 9200 MP (4 procs) Free x64
    Built by: 9200.16442.amd64fre.win8_gdr.121023-1503
    System Uptime:0 days 0:01:51.306
    *** WARNING: Unable to verify timestamp for bcraid.sys
    *** ERROR: Module load completed but symbols could not be loaded for bcraid.sys
    Probably caused by :bcraid.sys ( bcraid+e13f )
    BugCheck D1, {4, 7, 0, fffff8800ea5e13f}
    BugCheck Info: DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
    Arguments: 
    Arg1: 0000000000000004, memory referenced
    Arg2: 0000000000000007, IRQL
    Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
    Arg4: fffff8800ea5e13f, address which referenced memory
    BUGCHECK_STR:  AV
    DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
    PROCESS_NAME:  System
    FAILURE_BUCKET_ID: AV_bcraid+e13f
    CPUID:        "Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz"
    MaxSpeed:     3400
    CurrentSpeed: 3410
      BIOS Version                  0262
      BIOS Release Date             02/14/2012
      Manufacturer                  System manufacturer
      Product Name                  System Product Name
    ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
    **************************Sun Nov 25 13:52:26.808 2012 (UTC - 5:00)**************************
    Loading Dump File [C:\Users\Owner\SysnativeBSODApps\112512-13265-01.dmp]
    Windows 8 Kernel Version 9200 MP (4 procs) Free x64
    Built by: 9200.16442.amd64fre.win8_gdr.121023-1503
    System Uptime:0 days 0:01:51.475
    *** WARNING: Unable to verify timestamp for bcraid.sys
    *** ERROR: Module load completed but symbols could not be loaded for bcraid.sys
    Probably caused by :bcraid.sys ( bcraid+e13f )
    BugCheck D1, {4, 7, 0, fffff8800ea6713f}
    BugCheck Info: DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
    Arguments: 
    Arg1: 0000000000000004, memory referenced
    Arg2: 0000000000000007, IRQL
    Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
    Arg4: fffff8800ea6713f, address which referenced memory
    BUGCHECK_STR:  AV
    DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
    PROCESS_NAME:  System
    FAILURE_BUCKET_ID: AV_bcraid+e13f
    ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
    
    3rd Party Drivers:
    The following is for information purposes only.
    Any drivers in red should be updated or removed from your system. And should have been discussed in the body of my post.
    Code:
    **************************Sat Feb  2 03:44:43.968 2013 (UTC - 5:00)**************************
    bcraid.sys                  Fri Mar 21 17:55:25 2008 (47E42ECD)
    bccfg.sys                   Tue Jun 17 18:12:15 2008 (485836BF)
    rtl8187B.sys                Thu Nov  5 00:51:31 2009 (4AF267E3)
    asahci64.sys                Thu Jan  5 00:08:19 2012 (4F053043)
    dtsoftbus01.sys             Fri Jan 13 08:45:46 2012 (4F10358A)
    HECIx64.sys                 Mon Jul  2 18:14:58 2012 (4FF21D62)
    nvhda64v.sys                Tue Jul  3 11:25:04 2012 (4FF30ED0)
    RTKVHD64.sys                Tue Aug  7 06:49:39 2012 (5020F2C3)
    e1c63x64.sys                Fri Aug 10 18:40:50 2012 (50258DF2)
    intelppm.sys                Mon Nov  5 22:55:02 2012 (50988A16)
    hiber_iaStorA.sys           Mon Nov 19 15:09:40 2012 (50AA9204)
    dump_iaStorA.sys            Mon Nov 19 15:09:40 2012 (50AA9204)
    iaStorA.sys                 Mon Nov 19 15:09:40 2012 (50AA9204)
    SbieDrv.sys                 Sun Dec 16 06:24:57 2012 (50CDAF89)
    nvlddmkm.sys                Sat Dec 29 01:47:52 2012 (50DE9218)
    ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
    **************************Mon Jan 21 12:51:02.969 2013 (UTC - 5:00)**************************
    e1i63x64.sys                Wed Feb 29 22:25:14 2012 (4F4EEC1A)
    hiber_storahci.sys          Wed Jul 25 22:30:35 2012 (5010ABCB)
    dump_storahci.sys           Wed Jul 25 22:30:35 2012 (5010ABCB)
    nvlddmkm.sys                Fri Nov 30 22:24:02 2012 (50B97852)
    ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
    **************************Tue Dec 18 16:22:00.962 2012 (UTC - 5:00)**************************
    SbieDrv.sys                 Sat Aug 25 16:27:46 2012 (50393542)
    nvlddmkm.sys                Tue Oct  2 14:21:13 2012 (506B3099)
    ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
    **************************Thu Nov 29 14:24:01.887 2012 (UTC - 5:00)**************************
    InputFilter_FlexDef2b.sys   Fri Jun 18 20:36:01 2010 (4C1C10F1)
    intelppm.sys                Wed Jul 25 22:26:48 2012 (5010AAE8)
    ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
    **************************Sun Nov 25 14:01:15.661 2012 (UTC - 5:00)**************************
    bcraid.sys                  Tue Jun 17 18:15:55 2008 (4858379B)
    
    bcraid.sys - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.
    bccfg.sys - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.
    http://www.carrona.org/drivers/driver.php?id=rtl8187B.sys
    http://www.carrona.org/drivers/driver.php?id=asahci64.sys
    http://www.carrona.org/drivers/driver.php?id=dtsoftbus01.sys
    http://www.carrona.org/drivers/driver.php?id=HECIx64.sys
    http://www.carrona.org/drivers/driver.php?id=nvhda64v.sys
    http://www.carrona.org/drivers/driver.php?id=RTKVHD64.sys
    http://www.carrona.org/drivers/driver.php?id=e1c63x64.sys
    http://www.carrona.org/drivers/driver.php?id=intelppm.sys
    hiber_iaStorA.sys - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.
    http://www.carrona.org/drivers/driver.php?id=dump_iaStorA.sys
    http://www.carrona.org/drivers/driver.php?id=iaStorA.sys
    http://www.carrona.org/drivers/driver.php?id=SbieDrv.sys
    http://www.carrona.org/drivers/driver.php?id=nvlddmkm.sys
    http://www.carrona.org/drivers/driver.php?id=e1i63x64.sys
    http://www.carrona.org/drivers/driver.php?id=hiber_storahci.sys
    http://www.carrona.org/drivers/driver.php?id=dump_storahci.sys
    http://www.carrona.org/drivers/driver.php?id=nvlddmkm.sys
    http://www.carrona.org/drivers/driver.php?id=SbieDrv.sys
    http://www.carrona.org/drivers/driver.php?id=nvlddmkm.sys
    http://www.carrona.org/drivers/driver.php?id=InputFilter_FlexDef2b.sys
    http://www.carrona.org/drivers/driver.php?id=intelppm.sys
    bcraid.sys - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.
      My System SpecsSystem Spec

Random BSOD on Windows 8 boot
Related Threads
BSOD at Random Times for Random Reasons in BSOD Crashes and Debugging
DCP Watchdog, Memory Management, Kernel Security Failure and several others at random times - especially during large file transfers between drives. I did a memory test and it stated there was an issue but I removed the culprit and the random BSOD continues. Thanks for your help
Hi all, I get a random BSOD when I boot my HP Pavilion 15-e073sa notebook. It's only on boot up, and only every 2 or 3 boots it gives me a REFERENCE_BY_POINTER and reboots, usually with no problem. Any help would be appreciated, thanks!
Windows 8.1 random 10minute+ boot time in Performance & Maintenance
OK ill try to provide with as much information as I can. Ill describe my desktop. Its an amd Quad Core phenom...8GB RAM...SSD (OS) WD black (User Folders) for past week or so ive been having an extremly long boot. Anywhere from 10-20 minutes to boot up. Once im in everything seems to be ok. I...
Windows 8.1 random 10minute+ boot time in BSOD Crashes and Debugging
OK ill try to provide with as much information as I can. Ill describe my desktop. Its an amd Quad Core phenom...8GB RAM...SSD (OS) WD black (User Folders) for past week or so ive been having an extremly long boot. Anywhere from 10-20 minutes to boot up. Once im in everything seems to be ok. I just...
First post on this issue. Client computer that shows black screen with text at boot up. Cannot boot into Windows 8 (8.1?) This is what is on the black screen; Your PC needs to restat. Please hold down your power button. Error Code 0x0000012a Parameters: 0x0000000000000001
Hey guys, so I am in a bit of a pickle. I have an HP m6-k015dx laptop and it is giving me hell. I will get random BSOD's, usually at or a short while after login. They usually happen consecutively and then stop. I was able to enable driver verifier in order to see what was wrong. After it was...
getting random BSOD. now cannot boot at all in BSOD Crashes and Debugging
getting all kinds of BSOD since a few days ago. the first time it happened was when i was installing a AMD GPU driver half way. after that i rolled back to a stable driver thinking that was the one causing it but it only kept happening again. i started getting errors like memory management,...
Eight Forums Android App Eight Forums IOS App Follow us on Facebook