Windows 8 and 8.1 Forums

Weird wireless crash

  1. #1

    Weird wireless crash


    Hey guys,

    My roommates laptop is having a really weird wireless bug...
    He can connect to our local wireless, my phones tether, However, when he connects to his phones tether his machine crashes...
    Home wifi - G
    Home Wifi alt - N
    My tether - N
    His tether - N
    I have attached the dump files.

      My System SpecsSystem Spec

  2. #2


    Posts : 5,139
    Win8.1Pro - Finally!!!


    Sorry for the delay in responding. There just aren't that many people who do BSOD analysis, so at times we get a bit overwhelmed!

    Your BIOS dates from 2009. Please check at the manufacturer's website to see if there are any BIOS updates available for your system. Also check the readme file to see if they apply to the problems that you are having. Please be advised that flashing the BIOS is a very unforgiving process - and one mistake can physically damage your motherboard.

    We've seen a number of BSOD issues with SSD's. Here's the information that I've compiled so far:
    There's not a whole bunch available to test SSD's. The "easiest" test is to remove the SSD, install a platter-based hard drive, install Windows and test for stability that way.

    Here's some suggestions:
    - Update the SSD's firmware to the latest available version (VERY IMPORTANT!!!)
    - Update the motherboard controllers drivers to the latest available version from the controller manufacturer (NOT the mobo manufacturer unless you can't find any on the controller manufacturer's website)
    - Slow the memory (RAM) down to the next slower speed (I've only seen one person who claimed that this worked for them).
    - Use any manufacturer's utilities that you may have. If you don't have any, then try this free one (I haven't used it myself): Crystal Dew World
    - Update chipset and storage controller drivers to the latest available from the manufacturer of the device (not the manufacturer of the motherboard). Be sure to update ALL controllers on the motherboard!
    ....NOTE: Recently (Nov 2011) we had BSOD issues with the Marvell 91xx controller and an SSD. You may have to switch controllers also.
    - Replace the SSD with a platter based hard drive and see if that stops the BSOD's. If it does, then it's likely that there's a problem with the SSD OR an incompatibility with your system.
    It's my opinion that SSD's aren't reliable enough (with current hardware) to be used on a system that needs to work reliably. Until I see reliability I will not recommend, nor will I use, SSD's for critical applications.
    06 Dec 2011 - This post tends to confirm issues with certain SSD chipsets and certain controllers - [SOLVED] cant find the cause of BSOD F4 - Tech Support Forum
    29 May 2012 - The frequency of BSOD's with SSD's seems to have been decreasing over the last several months. It may be approaching time to re-evaluate my stand on their suitability for use in production systems.
    10 Nov 2012 - I'm seeing an upswing in SSD errors - but most appear due to older storage controller drivers. I strongly suggest NOT using storage controller drivers that don't date from 2012 (if none are available, don't connect an SSD to that controller)
    05 Jan 2013 - very interesting post about difficulties with the Marvell controllers even when not connected to the SSD drives: https://www.eightforums.com/bsod-cra...tml#post169956
    No drivers for these devices:
    PCI FLASH Memory PCI\VEN_1524&DEV_0730&SUBSYS_05731558&REV_00\4&27620C39&0&38F0 The drivers for this device are not installed.
    PCI FLASH Memory PCI\VEN_1524&DEV_0751&SUBSYS_05731558&REV_00\4&27620C39&0&3BF0 The drivers for this device are not installed.
    Most likely the first one is ENE PCI Memory Stick Card Reader Controller, and the second one is ENE PCI Secure Digital/MMC Card Reader Controller
    Please install the drivers for them. The WER Section of MSINFO32 shows BSOD's due to these devices.

    The last 3 memory dumps blame NETwLv64.sys (the rest blame the Card/Stick Reader devices). This driver is a part of your Intel Wireless. Please download and install the latest, Win8 compatible version from Intel Download Center

    Please update these older drivers. Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver. DO NOT manually delete/rename the driver as it may make the system unbootable! :

    EMS7SK.sys Thu Nov 16 21:53:05 2006 (455D2411)
    ENE PCI Memory Stick Card Reader Driver
    http://www.carrona.org/drivers/driver.php?id=EMS7SK.sys

    ESD7SK.sys Thu Nov 16 21:53:53 2006 (455D2441)
    ENE PCI Secure Digital/MMC Card Reader
    http://www.carrona.org/drivers/driver.php?id=ESD7SK.sys

    StkCPipe.sys Thu Jan 11 04:55:10 2007 (45A6097E)
    Syntek USB 2.0 Video Pipeline Driver [br] EASYCAP DC60 - STK1160 CHIPSET Driver
    http://www.carrona.org/drivers/driver.php?id=StkCPipe.sys

    StkCMini.sys Thu Apr 19 06:50:43 2007 (46274983)
    Syntek USB 2.0 Video Mini Driver [br] EASYCAP DC60 - STK1160 CHIPSET Driver
    http://www.carrona.org/drivers/driver.php?id=StkCMini.sys

    smserial.sys Mon Oct 26 11:36:18 2009 (4AE5C1F2)
    Motorola SM56 voice modem driver
    http://www.carrona.org/drivers/driver.php?id=smserial.sys

    itecir.sys Tue Jul 13 05:50:47 2010 (4C3C36F7)
    ITE Consumer IR Driver - EC CIR (PMC) - ITE Tech
    http://www.carrona.org/drivers/driver.php?id=itecir.sys

    NETwLv64.sys Mon Aug 16 10:26:39 2010 (4C694A9F)
    Intel(R) Wireless WiFi Link 4965AGN
    http://www.carrona.org/drivers/driver.php?id=NETwLv64.sys

    Rt630x64.sys Wed Oct 19 08:12:55 2011 (4E9EBEC7)
    Realtek PCI/PCIe Adapters
    http://www.carrona.org/drivers/driver.php?id=Rt630x64.sys

    Also check the slots for the card reader(s) to see if anything is stuck in there or broken in there.

    Post back if the BSOD's don't stop and we'll see what else we can figure out.

    Analysis:
    The following is for informational purposes only.
    Code:
    **************************Sun Jan 20 02:02:30.203 2013 (UTC - 5:00)**************************
    Loading Dump File [C:\Users\Owner\SysnativeBSODApps\012013-12714-01.dmp]
    Windows 8 Kernel Version 9200 MP (2 procs) Free x64
    Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
    System Uptime:0 days 0:04:04.910
    *** WARNING: Unable to verify timestamp for NETwLv64.sys
    *** ERROR: Module load completed but symbols could not be loaded for NETwLv64.sys
    Probably caused by :NETwLv64.sys ( NETwLv64+c243 )
    BugCheck C8, {0, 2, 0, 0}
    BugCheck Info: IRQL_UNEXPECTED_VALUE (c8)
    Arguments: 
    Arg1: 0000000000000000, (Current IRQL << 16) | (Expected IRQL << 8) | UniqueValue
    Arg2: 0000000000000002
    Arg3: 0000000000000000
    Arg4: 0000000000000000
    BUGCHECK_STR:  0xC8
    DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
    PROCESS_NAME: System
    FAILURE_BUCKET_ID: 0xC8_NETwLv64+c243
    CPUID:        "Intel(R) Core(TM)2 Duo CPU     T8300  @ 2.40GHz"
    MaxSpeed:     2400
    CurrentSpeed: 2394
      BIOS Version                  SROSA001.86C.
      BIOS Release Date             02/17/2009
      Manufacturer                  Clevo Co.
      Product Name                  M570RU
    ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
    **************************Sun Jan 20 01:57:51.866 2013 (UTC - 5:00)**************************
    Loading Dump File [C:\Users\Owner\SysnativeBSODApps\012013-12838-01.dmp]
    Windows 8 Kernel Version 9200 MP (2 procs) Free x64
    Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
    System Uptime:0 days 0:21:04.573
    *** WARNING: Unable to verify timestamp for NETwLv64.sys
    *** ERROR: Module load completed but symbols could not be loaded for NETwLv64.sys
    Probably caused by :NETwLv64.sys ( NETwLv64+ac10c )
    BugCheck D1, {400000006c, 2, 1, fffff88003ad110c}
    BugCheck Info: DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
    Arguments: 
    Arg1: 000000400000006c, memory referenced
    Arg2: 0000000000000002, IRQL
    Arg3: 0000000000000001, value 0 = read operation, 1 = write operation
    Arg4: fffff88003ad110c, address which referenced memory
    BUGCHECK_STR:  AV
    DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
    PROCESS_NAME: dwm.exe
    FAILURE_BUCKET_ID: AV_NETwLv64+ac10c
    CPUID:        "Intel(R) Core(TM)2 Duo CPU     T8300  @ 2.40GHz"
    MaxSpeed:     2400
    CurrentSpeed: 2394
      BIOS Version                  SROSA001.86C.
      BIOS Release Date             02/17/2009
      Manufacturer                  Clevo Co.
      Product Name                  M570RU
    ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
    **************************Sun Jan 20 01:35:49.641 2013 (UTC - 5:00)**************************
    Loading Dump File [C:\Users\Owner\SysnativeBSODApps\012013-11216-01.dmp]
    Windows 8 Kernel Version 9200 MP (2 procs) Free x64
    Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
    System Uptime:0 days 0:02:31.349
    *** WARNING: Unable to verify timestamp for NETwLv64.sys
    *** ERROR: Module load completed but symbols could not be loaded for NETwLv64.sys
    Probably caused by :NETwLv64.sys ( NETwLv64+c253 )
    BugCheck C8, {0, 2, 0, 0}
    BugCheck Info: IRQL_UNEXPECTED_VALUE (c8)
    Arguments: 
    Arg1: 0000000000000000, (Current IRQL << 16) | (Expected IRQL << 8) | UniqueValue
    Arg2: 0000000000000002
    Arg3: 0000000000000000
    Arg4: 0000000000000000
    BUGCHECK_STR:  0xC8
    DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
    PROCESS_NAME: System
    FAILURE_BUCKET_ID: 0xC8_NETwLv64+c253
    CPUID:        "Intel(R) Core(TM)2 Duo CPU     T8300  @ 2.40GHz"
    MaxSpeed:     2400
    CurrentSpeed: 2394
      BIOS Version                  SROSA001.86C.
      BIOS Release Date             02/17/2009
      Manufacturer                  Clevo Co.
      Product Name                  M570RU
    ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
    **************************Sun Jan 20 01:31:24.290 2013 (UTC - 5:00)**************************
    Loading Dump File [C:\Users\Owner\SysnativeBSODApps\012013-11122-01.dmp]
    Windows 8 Kernel Version 9200 MP (2 procs) Free x64
    Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
    System Uptime:0 days 0:51:06.519
    *** WARNING: Unable to verify timestamp for NETwLv64.sys
    *** ERROR: Module load completed but symbols could not be loaded for NETwLv64.sys
    Probably caused by :NETwLv64.sys ( NETwLv64+ac0f9 )
    BugCheck D1, {492, 2, 0, fffff880057a70f9}
    BugCheck Info: DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
    Arguments: 
    Arg1: 0000000000000492, memory referenced
    Arg2: 0000000000000002, IRQL
    Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
    Arg4: fffff880057a70f9, address which referenced memory
    BUGCHECK_STR:  AV
    DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
    PROCESS_NAME: System
    FAILURE_BUCKET_ID: AV_NETwLv64+ac0f9
    CPUID:        "Intel(R) Core(TM)2 Duo CPU     T8300  @ 2.40GHz"
    MaxSpeed:     2400
    CurrentSpeed: 2394
      BIOS Version                  SROSA001.86C.
      BIOS Release Date             02/17/2009
      Manufacturer                  Clevo Co.
      Product Name                  M570RU
    ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
    **************************Thu Jan 17 11:10:14.802 2013 (UTC - 5:00)**************************
    Loading Dump File [C:\Users\Owner\SysnativeBSODApps\011713-12012-01.dmp]
    Windows 8 Kernel Version 9200 MP (2 procs) Free x64
    Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
    System Uptime:0 days 0:01:08.104
    *** WARNING: Unable to verify timestamp for ESD7SK.sys
    *** ERROR: Module load completed but symbols could not be loaded for ESD7SK.sys
    *** ERROR: Module load completed but symbols could not be loaded for pci.sys
    Probably caused by :ESD7SK.sys ( ESD7SK+c9a6 )
    BugCheck 100000B8, {fffffa800432b040, fffffa800464a040, 0, 0}
    BugCheck Info: ATTEMPTED_SWITCH_FROM_DPC (b8)
    Arguments: 
    Arg1: fffffa800432b040, Original thread which is the cause of the failure
    Arg2: fffffa800464a040, New thread
    Arg3: 0000000000000000, Stack address of the original thread
    Arg4: 0000000000000000
    BUGCHECK_STR:  0xB8
    DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
    PROCESS_NAME: System
    FAILURE_BUCKET_ID: 0xB8_ESD7SK+c9a6
    CPUID:        "Intel(R) Core(TM)2 Duo CPU     T8300  @ 2.40GHz"
    MaxSpeed:     2400
    CurrentSpeed: 2394
      BIOS Version                  SROSA001.86C.
      BIOS Release Date             02/17/2009
      Manufacturer                  Clevo Co.
      Product Name                  M570RU
    ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
    **************************Thu Jan 17 09:22:44.857 2013 (UTC - 5:00)**************************
    Loading Dump File [C:\Users\Owner\SysnativeBSODApps\011713-12792-01.dmp]
    Windows 8 Kernel Version 9200 MP (2 procs) Free x64
    Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
    System Uptime:2 days 0:20:54.550
    *** WARNING: Unable to verify timestamp for ESD7SK.sys
    *** ERROR: Module load completed but symbols could not be loaded for ESD7SK.sys
    *** ERROR: Module load completed but symbols could not be loaded for pci.sys
    Probably caused by :ESD7SK.sys ( ESD7SK+ca36 )
    BugCheck 100000B8, {fffff801bed51880, fffffa800a3fd800, 0, 0}
    BugCheck Info: ATTEMPTED_SWITCH_FROM_DPC (b8)
    Arguments: 
    Arg1: fffff801bed51880, Original thread which is the cause of the failure
    Arg2: fffffa800a3fd800, New thread
    Arg3: 0000000000000000, Stack address of the original thread
    Arg4: 0000000000000000
    BUGCHECK_STR:  0xB8
    DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
    PROCESS_NAME: System
    FAILURE_BUCKET_ID: 0xB8_ESD7SK+ca36
    CPUID:        "Intel(R) Core(TM)2 Duo CPU     T8300  @ 2.40GHz"
    MaxSpeed:     2400
    CurrentSpeed: 2394
      BIOS Version                  SROSA001.86C.
      BIOS Release Date             02/17/2009
      Manufacturer                  Clevo Co.
      Product Name                  M570RU
    ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
    **************************Tue Jan 15 09:01:13.142 2013 (UTC - 5:00)**************************
    Loading Dump File [C:\Users\Owner\SysnativeBSODApps\011513-10748-01.dmp]
    Windows 8 Kernel Version 9200 MP (2 procs) Free x64
    Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
    System Uptime:3 days 0:26:31.647
    *** WARNING: Unable to verify timestamp for ESD7SK.sys
    *** ERROR: Module load completed but symbols could not be loaded for ESD7SK.sys
    *** ERROR: Module load completed but symbols could not be loaded for pci.sys
    Probably caused by :ESD7SK.sys ( ESD7SK+ca36 )
    BugCheck 100000B8, {fffffa8004ed4b00, fffffa800978a640, 0, 0}
    BugCheck Info: ATTEMPTED_SWITCH_FROM_DPC (b8)
    Arguments: 
    Arg1: fffffa8004ed4b00, Original thread which is the cause of the failure
    Arg2: fffffa800978a640, New thread
    Arg3: 0000000000000000, Stack address of the original thread
    Arg4: 0000000000000000
    BUGCHECK_STR:  0xB8
    DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
    PROCESS_NAME: System
    FAILURE_BUCKET_ID: 0xB8_ESD7SK+ca36
    CPUID:        "Intel(R) Core(TM)2 Duo CPU     T8300  @ 2.40GHz"
    MaxSpeed:     2400
    CurrentSpeed: 2394
      BIOS Version                  SROSA001.86C.
      BIOS Release Date             02/17/2009
      Manufacturer                  Clevo Co.
      Product Name                  M570RU
    ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
    **************************Sat Jan 12 08:34:11.025 2013 (UTC - 5:00)**************************
    Loading Dump File [C:\Users\Owner\SysnativeBSODApps\011213-10748-01.dmp]
    Windows 8 Kernel Version 9200 MP (2 procs) Free x64
    Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
    System Uptime:2 days 21:53:51.314
    *** WARNING: Unable to verify timestamp for ESD7SK.sys
    *** ERROR: Module load completed but symbols could not be loaded for ESD7SK.sys
    *** ERROR: Module load completed but symbols could not be loaded for pci.sys
    Probably caused by :ESD7SK.sys ( ESD7SK+ca36 )
    BugCheck 100000B8, {fffffa80098d4a00, fffff801f4168880, 0, 0}
    BugCheck Info: ATTEMPTED_SWITCH_FROM_DPC (b8)
    Arguments: 
    Arg1: fffffa80098d4a00, Original thread which is the cause of the failure
    Arg2: fffff801f4168880, New thread
    Arg3: 0000000000000000, Stack address of the original thread
    Arg4: 0000000000000000
    BUGCHECK_STR:  0xB8
    DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
    PROCESS_NAME: System
    FAILURE_BUCKET_ID: 0xB8_ESD7SK+ca36
    CPUID:        "Intel(R) Core(TM)2 Duo CPU     T8300  @ 2.40GHz"
    MaxSpeed:     2400
    CurrentSpeed: 2394
      BIOS Version                  SROSA001.86C.
      BIOS Release Date             02/17/2009
      Manufacturer                  Clevo Co.
      Product Name                  M570RU
    ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
    **************************Wed Jan  9 10:39:41.770 2013 (UTC - 5:00)**************************
    Loading Dump File [C:\Users\Owner\SysnativeBSODApps\010913-11731-01.dmp]
    Windows 8 Kernel Version 9200 MP (2 procs) Free x64
    Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
    System Uptime:2 days 14:46:36.919
    *** WARNING: Unable to verify timestamp for EMS7SK.sys
    *** ERROR: Module load completed but symbols could not be loaded for EMS7SK.sys
    Probably caused by :EMS7SK.sys ( EMS7SK+88a6 )
    BugCheck 100000B8, {fffffa8004a23800, fffffa800a21a040, 0, 0}
    BugCheck Info: ATTEMPTED_SWITCH_FROM_DPC (b8)
    Arguments: 
    Arg1: fffffa8004a23800, Original thread which is the cause of the failure
    Arg2: fffffa800a21a040, New thread
    Arg3: 0000000000000000, Stack address of the original thread
    Arg4: 0000000000000000
    BUGCHECK_STR:  0xB8
    DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
    PROCESS_NAME: System
    FAILURE_BUCKET_ID: 0xB8_EMS7SK+88a6
    CPUID:        "Intel(R) Core(TM)2 Duo CPU     T8300  @ 2.40GHz"
    MaxSpeed:     2400
    CurrentSpeed: 2394
      BIOS Version                  SROSA001.86C.
      BIOS Release Date             02/17/2009
      Manufacturer                  Clevo Co.
      Product Name                  M570RU
    ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
    **************************Sun Jan  6 19:52:31.795 2013 (UTC - 5:00)**************************
    Loading Dump File [C:\Users\Owner\SysnativeBSODApps\010613-10888-01.dmp]
    Windows 8 Kernel Version 9200 MP (2 procs) Free x64
    Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
    System Uptime:0 days 1:19:40.206
    *** WARNING: Unable to verify timestamp for EMS7SK.sys
    *** ERROR: Module load completed but symbols could not be loaded for EMS7SK.sys
    Probably caused by :EMS7SK.sys ( EMS7SK+88a6 )
    BugCheck 100000B8, {fffff80109962880, fffffa8005fb2300, 0, 0}
    BugCheck Info: ATTEMPTED_SWITCH_FROM_DPC (b8)
    Arguments: 
    Arg1: fffff80109962880, Original thread which is the cause of the failure
    Arg2: fffffa8005fb2300, New thread
    Arg3: 0000000000000000, Stack address of the original thread
    Arg4: 0000000000000000
    BUGCHECK_STR:  0xB8
    DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
    PROCESS_NAME: System
    FAILURE_BUCKET_ID: 0xB8_EMS7SK+88a6
    CPUID:        "Intel(R) Core(TM)2 Duo CPU     T8300  @ 2.40GHz"
    MaxSpeed:     2400
    CurrentSpeed: 2394
      BIOS Version                  SROSA001.86C.
      BIOS Release Date             02/17/2009
      Manufacturer                  Clevo Co.
      Product Name                  M570RU
    ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
    **************************Sun Jan  6 18:10:07.716 2013 (UTC - 5:00)**************************
    Loading Dump File [C:\Users\Owner\SysnativeBSODApps\010613-11263-01.dmp]
    Windows 8 Kernel Version 9200 MP (2 procs) Free x64
    Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
    System Uptime:0 days 18:28:43.067
    *** WARNING: Unable to verify timestamp for ESD7SK.sys
    *** ERROR: Module load completed but symbols could not be loaded for ESD7SK.sys
    *** ERROR: Module load completed but symbols could not be loaded for pci.sys
    Probably caused by :ESD7SK.sys ( ESD7SK+ca36 )
    BugCheck 100000B8, {fffffa800a129b00, fffffa8005fdd540, 0, 0}
    BugCheck Info: ATTEMPTED_SWITCH_FROM_DPC (b8)
    Arguments: 
    Arg1: fffffa800a129b00, Original thread which is the cause of the failure
    Arg2: fffffa8005fdd540, New thread
    Arg3: 0000000000000000, Stack address of the original thread
    Arg4: 0000000000000000
    BUGCHECK_STR:  0xB8
    DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
    PROCESS_NAME: System
    FAILURE_BUCKET_ID: 0xB8_ESD7SK+ca36
    CPUID:        "Intel(R) Core(TM)2 Duo CPU     T8300  @ 2.40GHz"
    MaxSpeed:     2400
    CurrentSpeed: 2394
      BIOS Version                  SROSA001.86C.
      BIOS Release Date             02/17/2009
      Manufacturer                  Clevo Co.
      Product Name                  M570RU
    ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
    **************************Sat Jan  5 23:40:51.735 2013 (UTC - 5:00)**************************
    Loading Dump File [C:\Users\Owner\SysnativeBSODApps\010513-12012-01.dmp]
    Windows 8 Kernel Version 9200 MP (2 procs) Free x64
    Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
    System Uptime:0 days 14:30:29.221
    *** WARNING: Unable to verify timestamp for ESD7SK.sys
    *** ERROR: Module load completed but symbols could not be loaded for ESD7SK.sys
    *** ERROR: Module load completed but symbols could not be loaded for pci.sys
    Probably caused by :ESD7SK.sys ( ESD7SK+ca36 )
    BugCheck 100000B8, {fffffa800a93b5c0, fffffa800a90f040, 0, 0}
    BugCheck Info: ATTEMPTED_SWITCH_FROM_DPC (b8)
    Arguments: 
    Arg1: fffffa800a93b5c0, Original thread which is the cause of the failure
    Arg2: fffffa800a90f040, New thread
    Arg3: 0000000000000000, Stack address of the original thread
    Arg4: 0000000000000000
    BUGCHECK_STR:  0xB8
    DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
    PROCESS_NAME: BdeUISrv.exe
    FAILURE_BUCKET_ID: 0xB8_ESD7SK+ca36
    CPUID:        "Intel(R) Core(TM)2 Duo CPU     T8300  @ 2.40GHz"
    MaxSpeed:     2400
    CurrentSpeed: 2394
      BIOS Version                  SROSA001.86C.
      BIOS Release Date             02/17/2009
      Manufacturer                  Clevo Co.
      Product Name                  M570RU
    ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
    **************************Sat Jan  5 09:09:55.719 2013 (UTC - 5:00)**************************
    Loading Dump File [C:\Users\Owner\SysnativeBSODApps\010513-11856-01.dmp]
    Windows 8 Kernel Version 9200 MP (2 procs) Free x64
    Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
    System Uptime:2 days 16:40:11.390
    *** WARNING: Unable to verify timestamp for ESD7SK.sys
    *** ERROR: Module load completed but symbols could not be loaded for ESD7SK.sys
    *** ERROR: Module load completed but symbols could not be loaded for pci.sys
    Probably caused by :ESD7SK.sys ( ESD7SK+ca36 )
    BugCheck 100000B8, {fffffa800a33a040, fffffa800a252080, 0, 0}
    BugCheck Info: ATTEMPTED_SWITCH_FROM_DPC (b8)
    Arguments: 
    Arg1: fffffa800a33a040, Original thread which is the cause of the failure
    Arg2: fffffa800a252080, New thread
    Arg3: 0000000000000000, Stack address of the original thread
    Arg4: 0000000000000000
    BUGCHECK_STR:  0xB8
    DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
    PROCESS_NAME: System
    FAILURE_BUCKET_ID: 0xB8_ESD7SK+ca36
    CPUID:        "Intel(R) Core(TM)2 Duo CPU     T8300  @ 2.40GHz"
    MaxSpeed:     2400
    CurrentSpeed: 2394
      BIOS Version                  SROSA001.86C.
      BIOS Release Date             02/17/2009
      Manufacturer                  Clevo Co.
      Product Name                  M570RU
    ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
    **************************Wed Jan  2 16:29:11.794 2013 (UTC - 5:00)**************************
    Loading Dump File [C:\Users\Owner\SysnativeBSODApps\010213-12043-01.dmp]
    Windows 8 Kernel Version 9200 MP (2 procs) Free x64
    Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
    System Uptime:1 days 13:11:11.104
    *** WARNING: Unable to verify timestamp for ESD7SK.sys
    *** ERROR: Module load completed but symbols could not be loaded for ESD7SK.sys
    *** ERROR: Module load completed but symbols could not be loaded for pci.sys
    Probably caused by :ESD7SK.sys ( ESD7SK+ca36 )
    BugCheck 100000B8, {fffff802de9c9880, fffffa80095bfb00, 0, 0}
    BugCheck Info: ATTEMPTED_SWITCH_FROM_DPC (b8)
    Arguments: 
    Arg1: fffff802de9c9880, Original thread which is the cause of the failure
    Arg2: fffffa80095bfb00, New thread
    Arg3: 0000000000000000, Stack address of the original thread
    Arg4: 0000000000000000
    BUGCHECK_STR:  0xB8
    DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
    PROCESS_NAME: System
    FAILURE_BUCKET_ID: 0xB8_ESD7SK+ca36
    CPUID:        "Intel(R) Core(TM)2 Duo CPU     T8300  @ 2.40GHz"
    MaxSpeed:     2400
    CurrentSpeed: 2394
      BIOS Version                  SROSA001.86C.
      BIOS Release Date             02/17/2009
      Manufacturer                  Clevo Co.
      Product Name                  M570RU
    ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
    **************************Tue Jan  1 03:17:26.808 2013 (UTC - 5:00)**************************
    Loading Dump File [C:\Users\Owner\SysnativeBSODApps\010113-12495-01.dmp]
    Windows 8 Kernel Version 9200 MP (2 procs) Free x64
    Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
    System Uptime:2 days 0:31:48.355
    *** WARNING: Unable to verify timestamp for ESD7SK.sys
    *** ERROR: Module load completed but symbols could not be loaded for ESD7SK.sys
    *** ERROR: Module load completed but symbols could not be loaded for pci.sys
    Probably caused by :ESD7SK.sys ( ESD7SK+ca36 )
    BugCheck 100000B8, {fffffa80043243c0, fffff80246166880, 0, 0}
    BugCheck Info: ATTEMPTED_SWITCH_FROM_DPC (b8)
    Arguments: 
    Arg1: fffffa80043243c0, Original thread which is the cause of the failure
    Arg2: fffff80246166880, New thread
    Arg3: 0000000000000000, Stack address of the original thread
    Arg4: 0000000000000000
    BUGCHECK_STR:  0xB8
    DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
    PROCESS_NAME: System
    FAILURE_BUCKET_ID: 0xB8_ESD7SK+ca36
    CPUID:        "Intel(R) Core(TM)2 Duo CPU     T8300  @ 2.40GHz"
    MaxSpeed:     2400
    CurrentSpeed: 2394
      BIOS Version                  SROSA001.86C.
      BIOS Release Date             02/17/2009
      Manufacturer                  Clevo Co.
      Product Name                  M570RU
    ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
    
    3rd Party Drivers:
    The following is for information purposes only.
    Any drivers in red should be updated or removed from your system. And should have been discussed in the body of my post.
    Code:
    **************************Sun Jan 20 02:02:30.203 2013 (UTC - 5:00)**************************
    StkCPipe.sys                Thu Jan 11 04:55:10 2007 (45A6097E)
    StkCMini.sys                Thu Apr 19 06:50:43 2007 (46274983)
    smserial.sys                Mon Oct 26 11:36:18 2009 (4AE5C1F2)
    itecir.sys                  Tue Jul 13 05:50:47 2010 (4C3C36F7)
    NETwLv64.sys                Mon Aug 16 10:26:39 2010 (4C694A9F)
    Rt630x64.sys                Wed Oct 19 08:12:55 2011 (4E9EBEC7)
    RTKVHD64.sys                Tue Jun 19 04:50:56 2012 (4FE03D70)
    AMPPAL.sys                  Wed Jul 18 03:48:59 2012 (50066A6B)
    intelide.sys                Wed Jul 25 22:29:52 2012 (5010ABA0)
    point64.sys                 Tue Sep 18 06:18:08 2012 (50584A60)
    dc3d.sys                    Tue Sep 18 06:18:24 2012 (50584A70)
    nvlddmkm.sys                Tue Oct  2 14:21:13 2012 (506B3099)
    SynTP.sys                   Thu Oct 25 22:16:32 2012 (5089F280)
    VBoxUSBMon.sys              Fri Oct 26 12:59:41 2012 (508AC17D)
    VBoxNetAdp.sys              Fri Oct 26 12:59:42 2012 (508AC17E)
    VBoxDrv.sys                 Fri Oct 26 13:00:50 2012 (508AC1C2)
    intelppm.sys                Mon Nov  5 22:55:02 2012 (50988A16)
    ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
    **************************Sun Jan 20 01:57:51.866 2013 (UTC - 5:00)**************************
    NETwLv64.sys                Thu Oct  7 08:11:47 2010 (4CADB903)
    ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
    **************************Thu Jan 17 11:10:14.802 2013 (UTC - 5:00)**************************
    EMS7SK.sys                  Thu Nov 16 21:53:05 2006 (455D2411)
    ESD7SK.sys                  Thu Nov 16 21:53:53 2006 (455D2441)
    ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
    **************************Thu Jan 17 09:22:44.857 2013 (UTC - 5:00)**************************
    EMS7SK.sys                  Wed Jan 31 04:00:08 2007 (45C05A98)
    ESD7SK.sys                  Wed Jan 31 04:00:17 2007 (45C05AA1)
    ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
    **************************Tue Jan 15 09:01:13.142 2013 (UTC - 5:00)**************************
    VBoxDD2R0.r0                Fri Oct 26 12:59:39 2012 (508AC17B)
    VBoxDDR0.r0                 Fri Oct 26 12:59:39 2012 (508AC17B)
    VMMR0.r0                    Fri Oct 26 13:00:50 2012 (508AC1C2)
    
    http://www.carrona.org/drivers/driver.php?id=StkCPipe.sys
    http://www.carrona.org/drivers/driver.php?id=StkCMini.sys
    http://www.carrona.org/drivers/driver.php?id=smserial.sys
    http://www.carrona.org/drivers/driver.php?id=itecir.sys
    http://www.carrona.org/drivers/driver.php?id=NETwLv64.sys
    http://www.carrona.org/drivers/driver.php?id=Rt630x64.sys
    http://www.carrona.org/drivers/driver.php?id=RTKVHD64.sys
    http://www.carrona.org/drivers/driver.php?id=AMPPAL.sys
    http://www.carrona.org/drivers/driver.php?id=intelide.sys
    http://www.carrona.org/drivers/driver.php?id=point64.sys
    http://www.carrona.org/drivers/driver.php?id=dc3d.sys
    http://www.carrona.org/drivers/driver.php?id=nvlddmkm.sys
    http://www.carrona.org/drivers/driver.php?id=SynTP.sys
    http://www.carrona.org/drivers/driver.php?id=VBoxUSBMon.sys
    http://www.carrona.org/drivers/driver.php?id=VBoxNetAdp.sys
    http://www.carrona.org/drivers/driver.php?id=VBoxDrv.sys
    http://www.carrona.org/drivers/driver.php?id=intelppm.sys
    http://www.carrona.org/drivers/driver.php?id=NETwLv64.sys
    http://www.carrona.org/drivers/driver.php?id=EMS7SK.sys
    http://www.carrona.org/drivers/driver.php?id=ESD7SK.sys
    http://www.carrona.org/drivers/driver.php?id=EMS7SK.sys
    http://www.carrona.org/drivers/driver.php?id=ESD7SK.sys
    http://www.carrona.org/drivers/driver.php?id=VBoxDD2R0.r0
    http://www.carrona.org/drivers/driver.php?id=VBoxDDR0.r0
    http://www.carrona.org/drivers/driver.php?id=VMMR0.r0
      My System SpecsSystem Spec

Weird wireless crash
Related Threads
Please can you assist with my wireless connection issue. I have just recently purchased the RTL8192CE wireless Lan 802.11 PCI-E NIC and installed it in my shuttle XPC. I am using Windows 8.1 64bit OS. The LAN card is picking up my wireless router fine, but when I enter my router password an...
this is weird in Installation & Setup
i have to galaxy s2 one of of the can't connect to the pc and the other one can. the one which dosn't connect a messege pops up ( the last device you connected to this computer malfunctioned and windows dosen't recognize it
(PREVIOUSLY POSTED THIS IN THE WRONG FORUM) This issue has been ongoing for months, ever since I purchased the computer in November. Microsoft basically abandoned my issue and I personally have not been able to solve it myself. I am using an ASUS K55N laptop, equipped with an AMD A8-4500M...
Hey, My month and half old Acer V3 started to give BSOD's, did some sort of recovery and started working again for a couple of hours, if not trying to access any Windows files. If tried to look up error logs etc it gave different versions of the BSOF. So I tried to run Recovery, getting it back...
Weird Weird Problem! in Network & Sharing
I have the strangest problem with my internet since updating to W8. My internet works absolutely fine all day, up until later in the day (not sure what time exactly this happens) but it stops working! It says it is connected but it simple can't find a network. I am connected via LAN to an...
My wireless card in my Compaq Presario works fine and Windows 8 detects it and said it was compatible. For some strange reason though it's not working in Windows 8. It hasn't detected my wireless network. Currently I am connecting using a cable. The card is Qualcomm Atheros AR5007 802.11b/g WIFI...
Warning, Updates to the O2 Wireless Box II and Wireless Box III O2 Broadband Status On reboot of your router, this update will change the SSID: code.
Eight Forums Android App Eight Forums IOS App Follow us on Facebook